From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, famz@redhat.com, jsnow@redhat.com,
kwolf@redhat.com, Ronnie Sahlberg <ronniesahlberg@gmail.com>,
Paolo Bonzini <pbonzini@redhat.com>, Peter Lieven <pl@kamp.de>,
Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v2 07/20] iscsi: Switch to .bdrv_co_block_status()
Date: Fri, 14 Jul 2017 07:14:44 -0500 [thread overview]
Message-ID: <20170714121457.10322-8-eblake@redhat.com> (raw)
In-Reply-To: <20170714121457.10322-1-eblake@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the iscsi driver accordingly. In this case,
it is handy to teach iscsi_co_block_status() to handle a NULL file
parameter, even though the block layer passes a non-NULL value,
because we also call the function directly. For now, there are
no optimizations done based on the mapping flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
v2: rebase to mapping parameter
---
block/iscsi.c | 54 ++++++++++++++++++++++++++----------------------------
1 file changed, 26 insertions(+), 28 deletions(-)
diff --git a/block/iscsi.c b/block/iscsi.c
index 682a316..a848817 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -680,9 +680,10 @@ out_unlock:
-static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors, int *pnum,
+static int64_t coroutine_fn iscsi_co_block_status(BlockDriverState *bs,
+ bool mapping,
+ int64_t offset,
+ int64_t bytes, int64_t *pnum,
BlockDriverState **file)
{
IscsiLun *iscsilun = bs->opaque;
@@ -693,15 +694,15 @@ static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
iscsi_co_init_iscsitask(iscsilun, &iTask);
- if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
+ if (!is_byte_request_lun_aligned(offset, bytes, iscsilun)) {
ret = -EINVAL;
goto out;
}
/* default to all sectors allocated */
ret = BDRV_BLOCK_DATA;
- ret |= (sector_num << BDRV_SECTOR_BITS) | BDRV_BLOCK_OFFSET_VALID;
- *pnum = nb_sectors;
+ ret |= (offset & BDRV_BLOCK_OFFSET_MASK) | BDRV_BLOCK_OFFSET_VALID;
+ *pnum = bytes;
/* LUN does not support logical block provisioning */
if (!iscsilun->lbpme) {
@@ -711,7 +712,7 @@ static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
qemu_mutex_lock(&iscsilun->mutex);
retry:
if (iscsi_get_lba_status_task(iscsilun->iscsi, iscsilun->lun,
- sector_qemu2lun(sector_num, iscsilun),
+ offset / iscsilun->block_size,
8 + 16, iscsi_co_generic_cb,
&iTask) == NULL) {
ret = -ENOMEM;
@@ -750,12 +751,12 @@ retry:
lbasd = &lbas->descriptors[0];
- if (sector_qemu2lun(sector_num, iscsilun) != lbasd->lba) {
+ if (offset / iscsilun->block_size != lbasd->lba) {
ret = -EIO;
goto out_unlock;
}
- *pnum = sector_lun2qemu(lbasd->num_blocks, iscsilun);
+ *pnum = lbasd->num_blocks * iscsilun->block_size;
if (lbasd->provisioning == SCSI_PROVISIONING_TYPE_DEALLOCATED ||
lbasd->provisioning == SCSI_PROVISIONING_TYPE_ANCHORED) {
@@ -766,15 +767,13 @@ retry:
}
if (ret & BDRV_BLOCK_ZERO) {
- iscsi_allocmap_set_unallocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
- *pnum * BDRV_SECTOR_SIZE);
+ iscsi_allocmap_set_unallocated(iscsilun, offset, *pnum);
} else {
- iscsi_allocmap_set_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
- *pnum * BDRV_SECTOR_SIZE);
+ iscsi_allocmap_set_allocated(iscsilun, offset, *pnum);
}
- if (*pnum > nb_sectors) {
- *pnum = nb_sectors;
+ if (*pnum > bytes) {
+ *pnum = bytes;
}
out_unlock:
qemu_mutex_unlock(&iscsilun->mutex);
@@ -782,7 +781,7 @@ out:
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
}
- if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID) {
+ if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID && file) {
*file = bs;
}
return ret;
@@ -821,25 +820,24 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
nb_sectors * BDRV_SECTOR_SIZE) &&
!iscsi_allocmap_is_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
nb_sectors * BDRV_SECTOR_SIZE)) {
- int pnum;
- BlockDriverState *file;
+ int64_t pnum;
/* check the block status from the beginning of the cluster
* containing the start sector */
- int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
- int head;
+ int64_t head;
int64_t ret;
- assert(cluster_sectors);
- head = sector_num % cluster_sectors;
- ret = iscsi_co_get_block_status(bs, sector_num - head,
- BDRV_REQUEST_MAX_SECTORS, &pnum,
- &file);
+ assert(iscsilun->cluster_size);
+ head = (sector_num * BDRV_SECTOR_SIZE) % iscsilun->cluster_size;
+ ret = iscsi_co_block_status(bs, false,
+ sector_num * BDRV_SECTOR_SIZE - head,
+ BDRV_REQUEST_MAX_BYTES, &pnum, NULL);
if (ret < 0) {
return ret;
}
/* if the whole request falls into an unallocated area we can avoid
* reading and directly return zeroes instead */
- if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors + head) {
+ if (ret & BDRV_BLOCK_ZERO &&
+ pnum >= nb_sectors * BDRV_SECTOR_SIZE + head) {
qemu_iovec_memset(iov, 0, 0x00, iov->size);
return 0;
}
@@ -2225,7 +2223,7 @@ static BlockDriver bdrv_iscsi = {
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
- .bdrv_co_get_block_status = iscsi_co_get_block_status,
+ .bdrv_co_block_status = iscsi_co_block_status,
.bdrv_co_pdiscard = iscsi_co_pdiscard,
.bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
@@ -2260,7 +2258,7 @@ static BlockDriver bdrv_iser = {
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
- .bdrv_co_get_block_status = iscsi_co_get_block_status,
+ .bdrv_co_block_status = iscsi_co_block_status,
.bdrv_co_pdiscard = iscsi_co_pdiscard,
.bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
--
2.9.4
next prev parent reply other threads:[~2017-07-14 12:15 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-14 12:14 [Qemu-devel] [PATCH v2 00/20] add byte-based block_status driver callbacks Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 01/20] block: Add .bdrv_co_block_status() callback Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 02/20] block: Switch passthrough drivers to .bdrv_co_block_status() Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 03/20] file-posix: Switch " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 04/20] gluster: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 05/20] iscsi: Switch cluster_sectors to byte-based Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 06/20] iscsi: Switch iscsi_allocmap_update() " Eric Blake
2017-07-14 12:14 ` Eric Blake [this message]
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 08/20] null: Switch to .bdrv_co_block_status() Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 09/20] parallels: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 10/20] qcow: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 11/20] qcow2: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 12/20] qed: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 13/20] raw: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 14/20] sheepdog: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 15/20] vdi: Avoid bitrot of debugging code Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 16/20] vdi: Switch to .bdrv_co_block_status() Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 17/20] vmdk: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 18/20] vpc: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 19/20] vvfat: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 20/20] block: Drop unused .bdrv_co_get_block_status() Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170714121457.10322-8-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=famz@redhat.com \
--cc=jsnow@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=pbonzini@redhat.com \
--cc=pl@kamp.de \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=ronniesahlberg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).