qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Aleksandr Bezzubikov <zuban32s@gmail.com>
Cc: qemu-devel@nongnu.org, imammedo@redhat.com, pbonzini@redhat.com,
	rth@twiddle.net, ehabkost@redhat.com, marcel@redhat.com,
	kraxel@redhat.com, seabios@seabios.org
Subject: Re: [Qemu-devel] [RFC PATCH v2 5/6] hw/pci: add bus_reserve property to pcie-root-port
Date: Sun, 23 Jul 2017 15:22:08 +0300	[thread overview]
Message-ID: <20170723055006-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <1500761743-1669-6-git-send-email-zuban32s@gmail.com>

On Sun, Jul 23, 2017 at 01:15:42AM +0300, Aleksandr Bezzubikov wrote:
> To enable hotplugging of a newly created pcie-pci-bridge,
> we need to tell firmware (SeaBIOS in this case)

Presumably, EFI would need to support this too?

> to reserve
> additional buses for pcie-root-port, that allows us to 
> hotplug pcie-pci-bridge into this root port.
> The number of buses to reserve is provided to the device via a corresponding
> property, and to the firmware via new PCI capability (next patch).
> The property's default value is 1 as we want to hotplug at least 1 bridge.

If so you should just teach firmware to allocate one bus #
unconditionally.

But why would that be so? What's wrong with a device
directly in the root port?


> 
> Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
> ---
>  hw/pci-bridge/pcie_root_port.c | 1 +
>  include/hw/pci/pcie_port.h     | 3 +++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c
> index 4d588cb..b0e49e1 100644
> --- a/hw/pci-bridge/pcie_root_port.c
> +++ b/hw/pci-bridge/pcie_root_port.c
> @@ -137,6 +137,7 @@ static void rp_exit(PCIDevice *d)
>  static Property rp_props[] = {
>      DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present,
>                      QEMU_PCIE_SLTCAP_PCP_BITNR, true),
> +    DEFINE_PROP_UINT8("bus_reserve", PCIEPort, bus_reserve, 1),
>      DEFINE_PROP_END_OF_LIST()
>  };
>  
> diff --git a/include/hw/pci/pcie_port.h b/include/hw/pci/pcie_port.h
> index 1333266..1b2dd1f 100644
> --- a/include/hw/pci/pcie_port.h
> +++ b/include/hw/pci/pcie_port.h
> @@ -34,6 +34,9 @@ struct PCIEPort {
>  
>      /* pci express switch port */
>      uint8_t     port;
> +
> +    /* additional buses to reserve on firmware init */
> +    uint8_t     bus_reserve;
>  };
>  
>  void pcie_port_init_reg(PCIDevice *d);

So here is a property and it does not do anything.
It makes it easier to work on series maybe, but review
is harder since we do not see what it does at all.
Please do not split up patches like this - you can maintain
it split up in your branch if you like and merge before sending.

> -- 
> 2.7.4

  reply	other threads:[~2017-07-23 12:22 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-22 22:15 [Qemu-devel] [RFC PATCH v2 0/6] Generic PCIE-PCI Bridge Aleksandr Bezzubikov
2017-07-22 22:15 ` [Qemu-devel] [RFC PATCH v2 1/6] hw/pci: introduce pcie-pci-bridge device Aleksandr Bezzubikov
2017-07-22 22:15 ` [Qemu-devel] [RFC PATCH v2 2/6] hw/i386: allow SHPC for Q35 machine Aleksandr Bezzubikov
2017-07-23 15:59   ` Marcel Apfelbaum
2017-07-23 16:49     ` Alexander Bezzubikov
2017-07-22 22:15 ` [Qemu-devel] [RFC PATCH v2 3/6] hw/pci: enable SHPC for PCIE-PCI bridge Aleksandr Bezzubikov
2017-07-22 22:15 ` [Qemu-devel] [RFC PATCH v2 4/6] hw/pci: introduce bridge-only vendor-specific capability to provide some hints to firmware Aleksandr Bezzubikov
2017-07-23 15:57   ` Marcel Apfelbaum
2017-07-23 16:19     ` Alexander Bezzubikov
2017-07-23 16:24       ` Marcel Apfelbaum
2017-07-26 19:43   ` Michael S. Tsirkin
2017-07-26 21:54     ` Alexander Bezzubikov
2017-07-26 23:11       ` [Qemu-devel] [SeaBIOS] " Laszlo Ersek
2017-07-26 23:28       ` [Qemu-devel] " Michael S. Tsirkin
2017-07-27  9:39         ` Marcel Apfelbaum
2017-07-27 13:58           ` [Qemu-devel] [SeaBIOS] " Laszlo Ersek
2017-07-28 23:15             ` Michael S. Tsirkin
2017-07-31 18:16               ` Laszlo Ersek
2017-07-31 18:55                 ` Michael S. Tsirkin
2017-07-31 19:04                   ` Laszlo Ersek
2017-07-28 23:12           ` [Qemu-devel] " Michael S. Tsirkin
2017-07-31 10:06             ` Marcel Apfelbaum
2017-07-31 18:36               ` Michael S. Tsirkin
2017-07-22 22:15 ` [Qemu-devel] [RFC PATCH v2 5/6] hw/pci: add bus_reserve property to pcie-root-port Aleksandr Bezzubikov
2017-07-23 12:22   ` Michael S. Tsirkin [this message]
2017-07-23 14:13     ` Marcel Apfelbaum
2017-07-24 20:46       ` Michael S. Tsirkin
2017-07-24 21:41         ` Alexander Bezzubikov
2017-07-24 21:58           ` Michael S. Tsirkin
2017-07-25 11:49             ` Marcel Apfelbaum
2017-07-28 23:24               ` Michael S. Tsirkin
2017-07-25 13:43       ` Michael S. Tsirkin
2017-07-25 13:50         ` Alexander Bezzubikov
2017-07-25 13:53           ` Michael S. Tsirkin
2017-07-25 14:09             ` Alexander Bezzubikov
2017-07-25 16:10               ` Marcel Apfelbaum
2017-07-25 17:11                 ` Alexander Bezzubikov
2017-07-26  4:24                   ` Marcel Apfelbaum
2017-07-26  5:29                     ` Gerd Hoffmann
2017-07-28 23:26                 ` Michael S. Tsirkin
2017-07-22 22:15 ` [Qemu-devel] [RFC PATCH v2 6/6] hw/pci: add hint capabilty for additional bus reservation " Aleksandr Bezzubikov
2017-07-24 20:43   ` Michael S. Tsirkin
2017-07-24 21:43     ` Alexander Bezzubikov
2017-07-25 11:52       ` Marcel Apfelbaum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170723055006-mutt-send-email-mst@kernel.org \
    --to=mst@redhat.com \
    --cc=ehabkost@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=marcel@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    --cc=seabios@seabios.org \
    --cc=zuban32s@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).