From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, armbru@redhat.com, qemu-block@nongnu.org,
Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH 2/4] qcow: Check failure of bdrv_getlength() and bdrv_truncate()
Date: Mon, 7 Aug 2017 15:30:05 -0500 [thread overview]
Message-ID: <20170807203007.19033-3-eblake@redhat.com> (raw)
In-Reply-To: <20170807203007.19033-1-eblake@redhat.com>
This also requires changing the return type of get_cluster_offset()
and adjusting all callers.
Use osdep.h macros instead of open-coded rounding while in the
area.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
---
block/qcow.c | 64 ++++++++++++++++++++++++++++++++++++++++++------------------
1 file changed, 45 insertions(+), 19 deletions(-)
diff --git a/block/qcow.c b/block/qcow.c
index c08cdc4a7b..937023d447 100644
--- a/block/qcow.c
+++ b/block/qcow.c
@@ -347,16 +347,17 @@ static int qcow_reopen_prepare(BDRVReopenState *state,
* 'compressed_size'. 'compressed_size' must be > 0 and <
* cluster_size
*
- * return 0 if not allocated.
+ * return 0 if not allocated, -errno on failure.
*/
-static uint64_t get_cluster_offset(BlockDriverState *bs,
- uint64_t offset, int allocate,
- int compressed_size,
- int n_start, int n_end)
+static int64_t get_cluster_offset(BlockDriverState *bs,
+ uint64_t offset, int allocate,
+ int compressed_size,
+ int n_start, int n_end)
{
BDRVQcowState *s = bs->opaque;
int min_index, i, j, l1_index, l2_index;
- uint64_t l2_offset, *l2_table, cluster_offset, tmp;
+ int64_t l2_offset, cluster_offset;
+ uint64_t *l2_table, tmp;
uint32_t min_count;
int new_l2_table;
@@ -368,8 +369,11 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
return 0;
/* allocate a new l2 entry */
l2_offset = bdrv_getlength(bs->file->bs);
+ if (l2_offset < 0) {
+ return l2_offset;
+ }
/* round to cluster size */
- l2_offset = (l2_offset + s->cluster_size - 1) & ~(s->cluster_size - 1);
+ l2_offset = QEMU_ALIGN_UP(l2_offset, s->cluster_size);
/* update the L1 entry */
s->l1_table[l1_index] = l2_offset;
tmp = cpu_to_be64(l2_offset);
@@ -430,8 +434,10 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
if (decompress_cluster(bs, cluster_offset) < 0)
return 0;
cluster_offset = bdrv_getlength(bs->file->bs);
- cluster_offset = (cluster_offset + s->cluster_size - 1) &
- ~(s->cluster_size - 1);
+ if (cluster_offset < 0) {
+ return cluster_offset;
+ }
+ cluster_offset = QEMU_ALIGN_UP(cluster_offset, s->cluster_size);
/* write the cluster content */
if (bdrv_pwrite(bs->file, cluster_offset, s->cluster_cache,
s->cluster_size) !=
@@ -439,12 +445,19 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
return -1;
} else {
cluster_offset = bdrv_getlength(bs->file->bs);
+ if (cluster_offset < 0) {
+ return cluster_offset;
+ }
if (allocate == 1) {
+ int ret;
+
/* round to cluster size */
- cluster_offset = (cluster_offset + s->cluster_size - 1) &
- ~(s->cluster_size - 1);
- bdrv_truncate(bs->file, cluster_offset + s->cluster_size,
- PREALLOC_MODE_OFF, NULL);
+ cluster_offset = QEMU_ALIGN_UP(cluster_offset, s->cluster_size);
+ ret = bdrv_truncate(bs->file, cluster_offset + s->cluster_size,
+ PREALLOC_MODE_OFF, NULL);
+ if (ret < 0) {
+ return ret;
+ }
/* if encrypted, we must initialize the cluster
content which won't be written */
if (bs->encrypted &&
@@ -491,11 +504,14 @@ static int64_t coroutine_fn qcow_co_get_block_status(BlockDriverState *bs,
{
BDRVQcowState *s = bs->opaque;
int index_in_cluster, n;
- uint64_t cluster_offset;
+ int64_t cluster_offset;
qemu_co_mutex_lock(&s->lock);
cluster_offset = get_cluster_offset(bs, sector_num << 9, 0, 0, 0, 0);
qemu_co_mutex_unlock(&s->lock);
+ if (cluster_offset < 0) {
+ return cluster_offset;
+ }
index_in_cluster = sector_num & (s->cluster_sectors - 1);
n = s->cluster_sectors - index_in_cluster;
if (n > nb_sectors)
@@ -567,7 +583,7 @@ static coroutine_fn int qcow_co_readv(BlockDriverState *bs, int64_t sector_num,
BDRVQcowState *s = bs->opaque;
int index_in_cluster;
int ret = 0, n;
- uint64_t cluster_offset;
+ int64_t cluster_offset;
struct iovec hd_iov;
QEMUIOVector hd_qiov;
uint8_t *buf;
@@ -588,8 +604,10 @@ static coroutine_fn int qcow_co_readv(BlockDriverState *bs, int64_t sector_num,
while (nb_sectors != 0) {
/* prepare next request */
- cluster_offset = get_cluster_offset(bs, sector_num << 9,
- 0, 0, 0, 0);
+ cluster_offset = get_cluster_offset(bs, sector_num << 9, 0, 0, 0, 0);
+ if (cluster_offset < 0) {
+ return cluster_offset;
+ }
index_in_cluster = sector_num & (s->cluster_sectors - 1);
n = s->cluster_sectors - index_in_cluster;
if (n > nb_sectors) {
@@ -670,7 +688,7 @@ static coroutine_fn int qcow_co_writev(BlockDriverState *bs, int64_t sector_num,
{
BDRVQcowState *s = bs->opaque;
int index_in_cluster;
- uint64_t cluster_offset;
+ int64_t cluster_offset;
int ret = 0, n;
struct iovec hd_iov;
QEMUIOVector hd_qiov;
@@ -704,6 +722,10 @@ static coroutine_fn int qcow_co_writev(BlockDriverState *bs, int64_t sector_num,
cluster_offset = get_cluster_offset(bs, sector_num << 9, 1, 0,
index_in_cluster,
index_in_cluster + n);
+ if (cluster_offset < 0) {
+ ret = cluster_offset;
+ break;
+ }
if (!cluster_offset || (cluster_offset & 511) != 0) {
ret = -EIO;
break;
@@ -949,7 +971,7 @@ qcow_co_pwritev_compressed(BlockDriverState *bs, uint64_t offset,
z_stream strm;
int ret, out_len;
uint8_t *buf, *out_buf;
- uint64_t cluster_offset;
+ int64_t cluster_offset;
buf = qemu_blockalign(bs, s->cluster_size);
if (bytes != s->cluster_size) {
@@ -1003,6 +1025,10 @@ qcow_co_pwritev_compressed(BlockDriverState *bs, uint64_t offset,
qemu_co_mutex_lock(&s->lock);
cluster_offset = get_cluster_offset(bs, offset, 2, out_len, 0, 0);
qemu_co_mutex_unlock(&s->lock);
+ if (cluster_offset < 0) {
+ ret = cluster_offset;
+ goto fail;
+ }
if (cluster_offset == 0) {
ret = -EIO;
goto fail;
--
2.13.4
next prev parent reply other threads:[~2017-08-07 20:30 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-07 20:30 [Qemu-devel] [PATCH for-2.10 0/4] More blk_getlength() fixes Eric Blake
2017-08-07 20:30 ` [Qemu-devel] [PATCH 1/4] vpc: Check failure of bdrv_getlength() Eric Blake
2017-08-07 20:43 ` Philippe Mathieu-Daudé
2017-08-07 23:32 ` [Qemu-devel] [Qemu-block] " Jeff Cody
2017-08-08 8:30 ` [Qemu-devel] " Kevin Wolf
2017-08-07 20:30 ` Eric Blake [this message]
2017-08-07 20:51 ` [Qemu-devel] [PATCH 2/4] qcow: Check failure of bdrv_getlength() and bdrv_truncate() Philippe Mathieu-Daudé
2017-08-07 23:33 ` [Qemu-devel] [Qemu-block] " Jeff Cody
2017-08-07 23:35 ` Jeff Cody
2017-08-08 8:28 ` [Qemu-devel] " Kevin Wolf
2017-08-08 14:16 ` Eric Blake
2017-08-07 20:30 ` [Qemu-devel] [PATCH 3/4] qcow2: Drop debugging dump_refcounts() Eric Blake
2017-08-07 20:44 ` Philippe Mathieu-Daudé
2017-08-07 23:33 ` [Qemu-devel] [Qemu-block] " Jeff Cody
2017-08-08 8:32 ` [Qemu-devel] " Kevin Wolf
2017-08-07 20:30 ` [Qemu-devel] [PATCH 4/4] qcow2: Check failure of bdrv_getlength() Eric Blake
2017-08-07 20:47 ` Philippe Mathieu-Daudé
2017-08-07 23:34 ` [Qemu-devel] [Qemu-block] " Jeff Cody
2017-08-08 8:32 ` [Qemu-devel] " Kevin Wolf
2017-08-07 22:58 ` [Qemu-devel] [Qemu-block] [PATCH for-2.10 0/4] More blk_getlength() fixes John Snow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170807203007.19033-3-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=armbru@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).