qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Cody <jcody@redhat.com>
To: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org, kwolf@redhat.com, armbru@redhat.com,
	qemu-block@nongnu.org, Max Reitz <mreitz@redhat.com>
Subject: Re: [Qemu-devel] [Qemu-block] [PATCH 2/4] qcow: Check failure of bdrv_getlength() and bdrv_truncate()
Date: Mon, 7 Aug 2017 19:33:43 -0400	[thread overview]
Message-ID: <20170807233343.GM22129@localhost.localdomain> (raw)
In-Reply-To: <20170807203007.19033-3-eblake@redhat.com>

On Mon, Aug 07, 2017 at 03:30:05PM -0500, Eric Blake wrote:
> This also requires changing the return type of get_cluster_offset()
> and adjusting all callers.
> 
> Use osdep.h macros instead of open-coded rounding while in the
> area.
> 
> Reported-by: Markus Armbruster <armbru@redhat.com>
> Signed-off-by: Eric Blake <eblake@redhat.com>



Reviewed-by: Jeff Cody <jcody@redhat.com>



> ---
>  block/qcow.c | 64 ++++++++++++++++++++++++++++++++++++++++++------------------
>  1 file changed, 45 insertions(+), 19 deletions(-)
> 
> diff --git a/block/qcow.c b/block/qcow.c
> index c08cdc4a7b..937023d447 100644
> --- a/block/qcow.c
> +++ b/block/qcow.c
> @@ -347,16 +347,17 @@ static int qcow_reopen_prepare(BDRVReopenState *state,
>   * 'compressed_size'. 'compressed_size' must be > 0 and <
>   * cluster_size
>   *
> - * return 0 if not allocated.
> + * return 0 if not allocated, -errno on failure.
>   */
> -static uint64_t get_cluster_offset(BlockDriverState *bs,
> -                                   uint64_t offset, int allocate,
> -                                   int compressed_size,
> -                                   int n_start, int n_end)
> +static int64_t get_cluster_offset(BlockDriverState *bs,
> +                                  uint64_t offset, int allocate,
> +                                  int compressed_size,
> +                                  int n_start, int n_end)
>  {
>      BDRVQcowState *s = bs->opaque;
>      int min_index, i, j, l1_index, l2_index;
> -    uint64_t l2_offset, *l2_table, cluster_offset, tmp;
> +    int64_t l2_offset, cluster_offset;
> +    uint64_t *l2_table, tmp;
>      uint32_t min_count;
>      int new_l2_table;
> 
> @@ -368,8 +369,11 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
>              return 0;
>          /* allocate a new l2 entry */
>          l2_offset = bdrv_getlength(bs->file->bs);
> +        if (l2_offset < 0) {
> +            return l2_offset;
> +        }
>          /* round to cluster size */
> -        l2_offset = (l2_offset + s->cluster_size - 1) & ~(s->cluster_size - 1);
> +        l2_offset = QEMU_ALIGN_UP(l2_offset, s->cluster_size);
>          /* update the L1 entry */
>          s->l1_table[l1_index] = l2_offset;
>          tmp = cpu_to_be64(l2_offset);
> @@ -430,8 +434,10 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
>              if (decompress_cluster(bs, cluster_offset) < 0)
>                  return 0;
>              cluster_offset = bdrv_getlength(bs->file->bs);
> -            cluster_offset = (cluster_offset + s->cluster_size - 1) &
> -                ~(s->cluster_size - 1);
> +            if (cluster_offset < 0) {
> +                return cluster_offset;
> +            }
> +            cluster_offset = QEMU_ALIGN_UP(cluster_offset, s->cluster_size);
>              /* write the cluster content */
>              if (bdrv_pwrite(bs->file, cluster_offset, s->cluster_cache,
>                              s->cluster_size) !=
> @@ -439,12 +445,19 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
>                  return -1;
>          } else {
>              cluster_offset = bdrv_getlength(bs->file->bs);
> +            if (cluster_offset < 0) {
> +                return cluster_offset;
> +            }
>              if (allocate == 1) {
> +                int ret;
> +
>                  /* round to cluster size */
> -                cluster_offset = (cluster_offset + s->cluster_size - 1) &
> -                    ~(s->cluster_size - 1);
> -                bdrv_truncate(bs->file, cluster_offset + s->cluster_size,
> -                              PREALLOC_MODE_OFF, NULL);
> +                cluster_offset = QEMU_ALIGN_UP(cluster_offset, s->cluster_size);
> +                ret = bdrv_truncate(bs->file, cluster_offset + s->cluster_size,
> +                                    PREALLOC_MODE_OFF, NULL);
> +                if (ret < 0) {
> +                    return ret;
> +                }
>                  /* if encrypted, we must initialize the cluster
>                     content which won't be written */
>                  if (bs->encrypted &&
> @@ -491,11 +504,14 @@ static int64_t coroutine_fn qcow_co_get_block_status(BlockDriverState *bs,
>  {
>      BDRVQcowState *s = bs->opaque;
>      int index_in_cluster, n;
> -    uint64_t cluster_offset;
> +    int64_t cluster_offset;
> 
>      qemu_co_mutex_lock(&s->lock);
>      cluster_offset = get_cluster_offset(bs, sector_num << 9, 0, 0, 0, 0);
>      qemu_co_mutex_unlock(&s->lock);
> +    if (cluster_offset < 0) {
> +        return cluster_offset;
> +    }
>      index_in_cluster = sector_num & (s->cluster_sectors - 1);
>      n = s->cluster_sectors - index_in_cluster;
>      if (n > nb_sectors)
> @@ -567,7 +583,7 @@ static coroutine_fn int qcow_co_readv(BlockDriverState *bs, int64_t sector_num,
>      BDRVQcowState *s = bs->opaque;
>      int index_in_cluster;
>      int ret = 0, n;
> -    uint64_t cluster_offset;
> +    int64_t cluster_offset;
>      struct iovec hd_iov;
>      QEMUIOVector hd_qiov;
>      uint8_t *buf;
> @@ -588,8 +604,10 @@ static coroutine_fn int qcow_co_readv(BlockDriverState *bs, int64_t sector_num,
> 
>      while (nb_sectors != 0) {
>          /* prepare next request */
> -        cluster_offset = get_cluster_offset(bs, sector_num << 9,
> -                                                 0, 0, 0, 0);
> +        cluster_offset = get_cluster_offset(bs, sector_num << 9, 0, 0, 0, 0);
> +        if (cluster_offset < 0) {
> +            return cluster_offset;
> +        }
>          index_in_cluster = sector_num & (s->cluster_sectors - 1);
>          n = s->cluster_sectors - index_in_cluster;
>          if (n > nb_sectors) {
> @@ -670,7 +688,7 @@ static coroutine_fn int qcow_co_writev(BlockDriverState *bs, int64_t sector_num,
>  {
>      BDRVQcowState *s = bs->opaque;
>      int index_in_cluster;
> -    uint64_t cluster_offset;
> +    int64_t cluster_offset;
>      int ret = 0, n;
>      struct iovec hd_iov;
>      QEMUIOVector hd_qiov;
> @@ -704,6 +722,10 @@ static coroutine_fn int qcow_co_writev(BlockDriverState *bs, int64_t sector_num,
>          cluster_offset = get_cluster_offset(bs, sector_num << 9, 1, 0,
>                                              index_in_cluster,
>                                              index_in_cluster + n);
> +        if (cluster_offset < 0) {
> +            ret = cluster_offset;
> +            break;
> +        }
>          if (!cluster_offset || (cluster_offset & 511) != 0) {
>              ret = -EIO;
>              break;
> @@ -949,7 +971,7 @@ qcow_co_pwritev_compressed(BlockDriverState *bs, uint64_t offset,
>      z_stream strm;
>      int ret, out_len;
>      uint8_t *buf, *out_buf;
> -    uint64_t cluster_offset;
> +    int64_t cluster_offset;
> 
>      buf = qemu_blockalign(bs, s->cluster_size);
>      if (bytes != s->cluster_size) {
> @@ -1003,6 +1025,10 @@ qcow_co_pwritev_compressed(BlockDriverState *bs, uint64_t offset,
>      qemu_co_mutex_lock(&s->lock);
>      cluster_offset = get_cluster_offset(bs, offset, 2, out_len, 0, 0);
>      qemu_co_mutex_unlock(&s->lock);
> +    if (cluster_offset < 0) {
> +        ret = cluster_offset;
> +        goto fail;
> +    }
>      if (cluster_offset == 0) {
>          ret = -EIO;
>          goto fail;
> -- 
> 2.13.4
> 
> 

  parent reply	other threads:[~2017-08-07 23:34 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-07 20:30 [Qemu-devel] [PATCH for-2.10 0/4] More blk_getlength() fixes Eric Blake
2017-08-07 20:30 ` [Qemu-devel] [PATCH 1/4] vpc: Check failure of bdrv_getlength() Eric Blake
2017-08-07 20:43   ` Philippe Mathieu-Daudé
2017-08-07 23:32   ` [Qemu-devel] [Qemu-block] " Jeff Cody
2017-08-08  8:30   ` [Qemu-devel] " Kevin Wolf
2017-08-07 20:30 ` [Qemu-devel] [PATCH 2/4] qcow: Check failure of bdrv_getlength() and bdrv_truncate() Eric Blake
2017-08-07 20:51   ` Philippe Mathieu-Daudé
2017-08-07 23:33   ` Jeff Cody [this message]
2017-08-07 23:35   ` [Qemu-devel] [Qemu-block] " Jeff Cody
2017-08-08  8:28   ` [Qemu-devel] " Kevin Wolf
2017-08-08 14:16     ` Eric Blake
2017-08-07 20:30 ` [Qemu-devel] [PATCH 3/4] qcow2: Drop debugging dump_refcounts() Eric Blake
2017-08-07 20:44   ` Philippe Mathieu-Daudé
2017-08-07 23:33   ` [Qemu-devel] [Qemu-block] " Jeff Cody
2017-08-08  8:32   ` [Qemu-devel] " Kevin Wolf
2017-08-07 20:30 ` [Qemu-devel] [PATCH 4/4] qcow2: Check failure of bdrv_getlength() Eric Blake
2017-08-07 20:47   ` Philippe Mathieu-Daudé
2017-08-07 23:34   ` [Qemu-devel] [Qemu-block] " Jeff Cody
2017-08-08  8:32   ` [Qemu-devel] " Kevin Wolf
2017-08-07 22:58 ` [Qemu-devel] [Qemu-block] [PATCH for-2.10 0/4] More blk_getlength() fixes John Snow

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170807233343.GM22129@localhost.localdomain \
    --to=jcody@redhat.com \
    --cc=armbru@redhat.com \
    --cc=eblake@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).