From: David Gibson <david@gibson.dropbear.id.au>
To: peter.maydell@linaro.org
Cc: agraf@suse.de, thuth@redhat.com, mdroth@linux.vnet.ibm.com,
cohuck@redhat.com, qemu-ppc@nongnu.org, qemu-devel@nongnu.org,
lvivier@redhat.com, David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PULL 5/7] hw/ppc/spapr: Fix segfault when instantiating a 'pc-dimm' without 'memdev'
Date: Wed, 23 Aug 2017 10:32:15 +1000 [thread overview]
Message-ID: <20170823003217.6769-6-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20170823003217.6769-1-david@gibson.dropbear.id.au>
From: Thomas Huth <thuth@redhat.com>
QEMU currently crashes when trying to use a 'pc-dimm' on the pseries
machine without specifying its 'memdev' property. This happens because
pc_dimm_get_memory_region() does not check whether the 'memdev' property
has properly been set by the user. Looking closer at this function, it's
also obvious that it is using &error_abort to call another function - and
this is bad in a function that is used in the hot-plugging calling chain
since this can also cause QEMU to exit unexpectedly.
So let's fix these issues in a proper way now: Add a "Error **errp"
parameter to pc_dimm_get_memory_region() which we use in case the 'memdev'
property has not been set by the user, and which we can use instead of
the &error_abort, and change the callers of get_memory_region() to make
use of this "errp" parameter for proper error checking.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
hw/i386/pc.c | 14 ++++++++++++--
hw/mem/nvdimm.c | 2 +-
hw/mem/pc-dimm.c | 14 +++++++++++---
hw/ppc/spapr.c | 42 ++++++++++++++++++++++++++++++------------
include/hw/mem/pc-dimm.h | 2 +-
5 files changed, 55 insertions(+), 19 deletions(-)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 59435390ba..21081041d5 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1691,10 +1691,15 @@ static void pc_dimm_plug(HotplugHandler *hotplug_dev,
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
PCDIMMDevice *dimm = PC_DIMM(dev);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
- MemoryRegion *mr = ddc->get_memory_region(dimm);
+ MemoryRegion *mr;
uint64_t align = TARGET_PAGE_SIZE;
bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);
+ mr = ddc->get_memory_region(dimm, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
if (memory_region_get_alignment(mr) && pcmc->enforce_aligned_dimm) {
align = memory_region_get_alignment(mr);
}
@@ -1758,10 +1763,15 @@ static void pc_dimm_unplug(HotplugHandler *hotplug_dev,
PCMachineState *pcms = PC_MACHINE(hotplug_dev);
PCDIMMDevice *dimm = PC_DIMM(dev);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
- MemoryRegion *mr = ddc->get_memory_region(dimm);
+ MemoryRegion *mr;
HotplugHandlerClass *hhc;
Error *local_err = NULL;
+ mr = ddc->get_memory_region(dimm, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev);
hhc->unplug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err);
diff --git a/hw/mem/nvdimm.c b/hw/mem/nvdimm.c
index db896b0bb6..952fce5ec8 100644
--- a/hw/mem/nvdimm.c
+++ b/hw/mem/nvdimm.c
@@ -71,7 +71,7 @@ static void nvdimm_init(Object *obj)
NULL, NULL);
}
-static MemoryRegion *nvdimm_get_memory_region(PCDIMMDevice *dimm)
+static MemoryRegion *nvdimm_get_memory_region(PCDIMMDevice *dimm, Error **errp)
{
NVDIMMDevice *nvdimm = NVDIMM(dimm);
diff --git a/hw/mem/pc-dimm.c b/hw/mem/pc-dimm.c
index ea67b461c2..bdf6649083 100644
--- a/hw/mem/pc-dimm.c
+++ b/hw/mem/pc-dimm.c
@@ -363,7 +363,10 @@ static void pc_dimm_get_size(Object *obj, Visitor *v, const char *name,
PCDIMMDevice *dimm = PC_DIMM(obj);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(obj);
- mr = ddc->get_memory_region(dimm);
+ mr = ddc->get_memory_region(dimm, errp);
+ if (!mr) {
+ return;
+ }
value = memory_region_size(mr);
visit_type_uint64(v, name, &value, errp);
@@ -411,9 +414,14 @@ static void pc_dimm_unrealize(DeviceState *dev, Error **errp)
host_memory_backend_set_mapped(dimm->hostmem, false);
}
-static MemoryRegion *pc_dimm_get_memory_region(PCDIMMDevice *dimm)
+static MemoryRegion *pc_dimm_get_memory_region(PCDIMMDevice *dimm, Error **errp)
{
- return host_memory_backend_get_memory(dimm->hostmem, &error_abort);
+ if (!dimm->hostmem) {
+ error_setg(errp, "'" PC_DIMM_MEMDEV_PROP "' property must be set");
+ return NULL;
+ }
+
+ return host_memory_backend_get_memory(dimm->hostmem, errp);
}
static MemoryRegion *pc_dimm_get_vmstate_memory_region(PCDIMMDevice *dimm)
diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index f7a19720dc..cec441cbf4 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -2772,10 +2772,15 @@ static void spapr_memory_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
sPAPRMachineState *ms = SPAPR_MACHINE(hotplug_dev);
PCDIMMDevice *dimm = PC_DIMM(dev);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
- MemoryRegion *mr = ddc->get_memory_region(dimm);
- uint64_t align = memory_region_get_alignment(mr);
- uint64_t size = memory_region_size(mr);
- uint64_t addr;
+ MemoryRegion *mr;
+ uint64_t align, size, addr;
+
+ mr = ddc->get_memory_region(dimm, &local_err);
+ if (local_err) {
+ goto out;
+ }
+ align = memory_region_get_alignment(mr);
+ size = memory_region_size(mr);
pc_dimm_memory_plug(dev, &ms->hotplug_memory, mr, align, &local_err);
if (local_err) {
@@ -2808,10 +2813,16 @@ static void spapr_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
{
PCDIMMDevice *dimm = PC_DIMM(dev);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
- MemoryRegion *mr = ddc->get_memory_region(dimm);
- uint64_t size = memory_region_size(mr);
+ MemoryRegion *mr;
+ uint64_t size;
char *mem_dev;
+ mr = ddc->get_memory_region(dimm, errp);
+ if (!mr) {
+ return;
+ }
+ size = memory_region_size(mr);
+
if (size % SPAPR_MEMORY_BLOCK_SIZE) {
error_setg(errp, "Hotplugged memory size must be a multiple of "
"%lld MB", SPAPR_MEMORY_BLOCK_SIZE / M_BYTE);
@@ -2882,7 +2893,7 @@ static sPAPRDIMMState *spapr_recover_pending_dimm_state(sPAPRMachineState *ms,
{
sPAPRDRConnector *drc;
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
- MemoryRegion *mr = ddc->get_memory_region(dimm);
+ MemoryRegion *mr = ddc->get_memory_region(dimm, &error_abort);
uint64_t size = memory_region_size(mr);
uint32_t nr_lmbs = size / SPAPR_MEMORY_BLOCK_SIZE;
uint32_t avail_lmbs = 0;
@@ -2912,7 +2923,7 @@ void spapr_lmb_release(DeviceState *dev)
sPAPRMachineState *spapr = SPAPR_MACHINE(qdev_get_hotplug_handler(dev));
PCDIMMDevice *dimm = PC_DIMM(dev);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
- MemoryRegion *mr = ddc->get_memory_region(dimm);
+ MemoryRegion *mr = ddc->get_memory_region(dimm, &error_abort);
sPAPRDIMMState *ds = spapr_pending_dimm_unplugs_find(spapr, PC_DIMM(dev));
/* This information will get lost if a migration occurs
@@ -2945,12 +2956,19 @@ static void spapr_memory_unplug_request(HotplugHandler *hotplug_dev,
Error *local_err = NULL;
PCDIMMDevice *dimm = PC_DIMM(dev);
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
- MemoryRegion *mr = ddc->get_memory_region(dimm);
- uint64_t size = memory_region_size(mr);
- uint32_t nr_lmbs = size / SPAPR_MEMORY_BLOCK_SIZE;
- uint64_t addr_start, addr;
+ MemoryRegion *mr;
+ uint32_t nr_lmbs;
+ uint64_t size, addr_start, addr;
int i;
sPAPRDRConnector *drc;
+
+ mr = ddc->get_memory_region(dimm, &local_err);
+ if (local_err) {
+ goto out;
+ }
+ size = memory_region_size(mr);
+ nr_lmbs = size / SPAPR_MEMORY_BLOCK_SIZE;
+
addr_start = object_property_get_uint(OBJECT(dimm), PC_DIMM_ADDR_PROP,
&local_err);
if (local_err) {
diff --git a/include/hw/mem/pc-dimm.h b/include/hw/mem/pc-dimm.h
index 1e483f2670..6f8c3eb1b3 100644
--- a/include/hw/mem/pc-dimm.h
+++ b/include/hw/mem/pc-dimm.h
@@ -71,7 +71,7 @@ typedef struct PCDIMMDeviceClass {
/* public */
void (*realize)(PCDIMMDevice *dimm, Error **errp);
- MemoryRegion *(*get_memory_region)(PCDIMMDevice *dimm);
+ MemoryRegion *(*get_memory_region)(PCDIMMDevice *dimm, Error **errp);
MemoryRegion *(*get_vmstate_memory_region)(PCDIMMDevice *dimm);
} PCDIMMDeviceClass;
--
2.13.5
next prev parent reply other threads:[~2017-08-23 0:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-23 0:32 [Qemu-devel] [PULL 0/7] ppc-for-2.10 queue 20170823 David Gibson
2017-08-23 0:32 ` [Qemu-devel] [PULL 1/7] boot-serial-test: prefer tcg accelerator David Gibson
2017-08-23 0:32 ` [Qemu-devel] [PULL 2/7] target/ppc: 'PVR != host PVR' in KVM_SET_SREGS workaround David Gibson
2017-08-23 0:32 ` [Qemu-devel] [PULL 3/7] ppc: fix ppc_set_compat() with KVM PR David Gibson
2017-08-23 0:32 ` [Qemu-devel] [PULL 4/7] spapr: Allow configure-connector to be called multiple times David Gibson
2017-08-23 0:32 ` David Gibson [this message]
2017-08-23 0:32 ` [Qemu-devel] [PULL 6/7] hw/ppc/spapr_rtc: Mark the RTC device with user_creatable = false David Gibson
2017-08-23 0:32 ` [Qemu-devel] [PULL 7/7] hw/ppc/spapr_iommu: Fix crash when removing the "spapr-tce-table" device David Gibson
2017-08-23 11:22 ` [Qemu-devel] [PULL 0/7] ppc-for-2.10 queue 20170823 Peter Maydell
-- strict thread matches above, loose matches on Subject: below --
2017-08-22 4:24 [Qemu-devel] [PULL 0/7] ppc-for-2.10 queue 20170822 David Gibson
2017-08-22 4:24 ` [Qemu-devel] [PULL 5/7] hw/ppc/spapr: Fix segfault when instantiating a 'pc-dimm' without 'memdev' David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170823003217.6769-6-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=agraf@suse.de \
--cc=cohuck@redhat.com \
--cc=lvivier@redhat.com \
--cc=mdroth@linux.vnet.ibm.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).