From: John Snow <jsnow@redhat.com>
To: qemu-block@nongnu.org
Cc: eblake@redhat.com, qemu-devel@nongnu.org, stefanha@redhat.com,
f4bug@amsat.org, John Snow <jsnow@redhat.com>
Subject: [Qemu-devel] [PATCH v3 8/9] AHCI: pretty-print FIS to buffer instead of stderr
Date: Thu, 31 Aug 2017 20:15:01 -0400 [thread overview]
Message-ID: <20170901001502.29915-9-jsnow@redhat.com> (raw)
In-Reply-To: <20170901001502.29915-1-jsnow@redhat.com>
The current FIS printing routines dump the FIS to screen. adjust this
such that it dumps to buffer instead, then use this ability to have
FIS dump mechanisms via trace-events instead of compiled defines.
Signed-off-by: John Snow <jsnow@redhat.com>
---
hw/ide/ahci.c | 28 ++++++++++++++++++----------
hw/ide/trace-events | 4 ++++
2 files changed, 22 insertions(+), 10 deletions(-)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 82cc196..6c98047 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -644,20 +644,21 @@ static void ahci_reset_port(AHCIState *s, int port)
ahci_init_d2h(d);
}
-static void debug_print_fis(uint8_t *fis, int cmd_len)
+/* Buffer pretty output based on a raw FIS structure. */
+static char *ahci_pretty_buffer_fis(uint8_t *fis, int cmd_len)
{
-#if DEBUG_AHCI
int i;
+ GString *s = g_string_new("FIS:");
- fprintf(stderr, "fis:");
for (i = 0; i < cmd_len; i++) {
if ((i & 0xf) == 0) {
- fprintf(stderr, "\n%02x:",i);
+ g_string_append_printf(s, "\n0x%02x: ", i);
}
- fprintf(stderr, "%02x ",fis[i]);
+ g_string_append_printf(s, "%02x ", fis[i]);
}
- fprintf(stderr, "\n");
-#endif
+ g_string_append_c(s, '\n');
+
+ return g_string_free(s, FALSE);
}
static bool ahci_map_fis_address(AHCIDevice *ad)
@@ -1201,7 +1202,11 @@ static void handle_reg_h2d_fis(AHCIState *s, int port,
* table to ide_state->io_buffer */
if (opts & AHCI_CMD_ATAPI) {
memcpy(ide_state->io_buffer, &cmd_fis[AHCI_COMMAND_TABLE_ACMD], 0x10);
- debug_print_fis(ide_state->io_buffer, 0x10);
+ if (trace_event_get_state_backends(TRACE_HANDLE_REG_H2D_FIS_DUMP)) {
+ char *pretty_fis = ahci_pretty_buffer_fis(ide_state->io_buffer, 0x10);
+ trace_handle_reg_h2d_fis_dump(s, port, pretty_fis);
+ g_free(pretty_fis);
+ }
s->dev[port].done_atapi_packet = false;
/* XXX send PIO setup FIS */
}
@@ -1256,8 +1261,11 @@ static int handle_cmd(AHCIState *s, int port, uint8_t slot)
trace_handle_cmd_badmap(s, port, cmd_len);
goto out;
}
- debug_print_fis(cmd_fis, 0x80);
-
+ if (trace_event_get_state_backends(TRACE_HANDLE_CMD_FIS_DUMP)) {
+ char *pretty_fis = ahci_pretty_buffer_fis(cmd_fis, 0x80);
+ trace_handle_cmd_fis_dump(s, port, pretty_fis);
+ g_free(pretty_fis);
+ }
switch (cmd_fis[0]) {
case SATA_FIS_TYPE_REGISTER_H2D:
handle_reg_h2d_fis(s, port, slot, cmd_fis);
diff --git a/hw/ide/trace-events b/hw/ide/trace-events
index e15fd77..601bd97 100644
--- a/hw/ide/trace-events
+++ b/hw/ide/trace-events
@@ -105,3 +105,7 @@ ahci_cmd_done(void *s, int port) "ahci(%p)[%d]: cmd done"
ahci_reset(void *s) "ahci(%p): HBA reset"
allwinner_ahci_mem_read(void *s, void *a, uint64_t addr, uint64_t val, unsigned size) "ahci(%p): read a=%p addr=0x%"HWADDR_PRIx" val=0x%"PRIx64", size=%d"
allwinner_ahci_mem_write(void *s, void *a, uint64_t addr, uint64_t val, unsigned size) "ahci(%p): write a=%p addr=0x%"HWADDR_PRIx" val=0x%"PRIx64", size=%d"
+
+# Warning: Verbose
+handle_reg_h2d_fis_dump(void *s, int port, const char *fis) "ahci(%p)[%d]: %s"
+handle_cmd_fis_dump(void *s, int port, const char *fis) "ahci(%p)[%d]: %s"
--
2.9.5
next prev parent reply other threads:[~2017-09-01 0:15 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-01 0:14 [Qemu-devel] [PATCH v3 0/9] IDE: replace printfs with tracing John Snow
2017-09-01 0:14 ` [Qemu-devel] [PATCH v3 1/9] IDE: replace DEBUG_IDE with tracing system John Snow
2017-09-01 0:14 ` [Qemu-devel] [PATCH v3 2/9] IDE: Add register hints to tracing John Snow
2017-09-01 0:14 ` [Qemu-devel] [PATCH v3 3/9] IDE: add tracing for data ports John Snow
2017-09-01 0:14 ` [Qemu-devel] [PATCH v3 4/9] ATAPI: Replace DEBUG_IDE_ATAPI with tracing events John Snow
2017-09-01 0:14 ` [Qemu-devel] [PATCH v3 5/9] IDE: replace DEBUG_AIO with trace events John Snow
2017-09-01 0:27 ` Philippe Mathieu-Daudé
2017-09-01 0:40 ` John Snow
2017-09-01 0:14 ` [Qemu-devel] [PATCH v3 6/9] AHCI: Replace DPRINTF with trace-events John Snow
2017-09-01 0:15 ` [Qemu-devel] [PATCH v3 7/9] AHCI: Rework IRQ constants John Snow
2017-09-01 0:15 ` John Snow [this message]
2017-09-01 0:15 ` [Qemu-devel] [PATCH v3 9/9] AHCI: remove DPRINTF macro John Snow
2017-09-01 0:27 ` [Qemu-devel] [PATCH v3 0/9] IDE: replace printfs with tracing no-reply
2017-09-01 0:37 ` John Snow
2017-09-01 10:56 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2017-09-01 18:57 ` John Snow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170901001502.29915-9-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=eblake@redhat.com \
--cc=f4bug@amsat.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).