From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Jeff Cody <jcody@redhat.com>
Cc: qemu-devel@nongnu.org, qemu-block@nongnu.org,
mrezanin@redhat.com, ehabkost@redhat.com, peterx@redhat.com,
jsnow@redhat.com
Subject: Re: [Qemu-devel] [PATCH v2 3/3] hmp: Optionally disable live block operations in HMP monitor
Date: Tue, 5 Sep 2017 15:01:24 +0100 [thread overview]
Message-ID: <20170905140124.GE2112@work-vm> (raw)
In-Reply-To: <8a9d17a953caedcb66655d945181457eccde9acd.1504112256.git.jcody@redhat.com>
* Jeff Cody (jcody@redhat.com) wrote:
> From: Jeffrey Cody <jcody@redhat.com>
>
> If live block operations are disabled, disable the corresponding
> HMP commands.
>
> Signed-off-by: Jeff Cody <jcody@redhat.com>
OK from HMP side, although perhaps it's worth squashing
some of the commands so they're adjacent in the files.
Dave
> ---
> hmp-commands-info.hx | 4 ++++
> hmp-commands.hx | 12 ++++++++++++
> hmp.c | 12 ++++++++++++
> 3 files changed, 28 insertions(+)
>
> diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx
> index d9df238..0967e41 100644
> --- a/hmp-commands-info.hx
> +++ b/hmp-commands-info.hx
> @@ -84,6 +84,8 @@ STEXI
> Show block device statistics.
> ETEXI
>
> +#ifdef CONFIG_LIVE_BLOCK_OPS
> +
> {
> .name = "block-jobs",
> .args_type = "",
> @@ -98,6 +100,8 @@ STEXI
> Show progress of ongoing block device operations.
> ETEXI
>
> +#endif /* CONFIG_LIVE_BLOCK_OPS */
> +
> {
> .name = "registers",
> .args_type = "cpustate_all:-a",
> diff --git a/hmp-commands.hx b/hmp-commands.hx
> index 1941e19..2d137a1 100644
> --- a/hmp-commands.hx
> +++ b/hmp-commands.hx
> @@ -73,6 +73,8 @@ but should be used with extreme caution. Note that this command only
> resizes image files, it can not resize block devices like LVM volumes.
> ETEXI
>
> +#ifdef CONFIG_LIVE_BLOCK_OPS
> +
> {
> .name = "block_stream",
> .args_type = "device:B,speed:o?,base:s?",
> @@ -159,6 +161,8 @@ STEXI
> Resume a paused block streaming operation.
> ETEXI
>
> +#endif /* CONFIG_LIVE_BLOCK_OPS */
> +
> {
> .name = "eject",
> .args_type = "force:-f,device:B",
> @@ -1169,6 +1173,8 @@ STEXI
> Enables or disables migration mode.
> ETEXI
>
> +#ifdef CONFIG_LIVE_BLOCK_OPS
> +
> {
> .name = "snapshot_blkdev",
> .args_type = "reuse:-n,device:B,snapshot-file:s?,format:s?",
> @@ -1190,6 +1196,8 @@ STEXI
> Snapshot device, using snapshot file as target if provided
> ETEXI
>
> +#endif /* CONFIG_LIVE_BLOCK_OPS */
> +
> {
> .name = "snapshot_blkdev_internal",
> .args_type = "device:B,name:s",
> @@ -1224,6 +1232,8 @@ STEXI
> Delete an internal snapshot on device if it support
> ETEXI
>
> +#ifdef CONFIG_LIVE_BLOCK_OPS
> +
> {
> .name = "drive_mirror",
> .args_type = "reuse:-n,full:-f,device:B,target:s,format:s?",
> @@ -1267,6 +1277,8 @@ STEXI
> Start a point-in-time copy of a block device to a specificed target.
> ETEXI
>
> +#endif /* CONFIG_LIVE_BLOCK_OPS */
> +
> {
> .name = "drive_add",
> .args_type = "node:-n,pci_addr:s,opts:s",
> diff --git a/hmp.c b/hmp.c
> index fd80dce..ab985c6 100644
> --- a/hmp.c
> +++ b/hmp.c
> @@ -951,6 +951,8 @@ void hmp_info_pci(Monitor *mon, const QDict *qdict)
> qapi_free_PciInfoList(info_list);
> }
>
> +#ifdef CONFIG_LIVE_BLOCK_OPS
> +
> void hmp_info_block_jobs(Monitor *mon, const QDict *qdict)
> {
> BlockJobInfoList *list;
> @@ -989,6 +991,8 @@ void hmp_info_block_jobs(Monitor *mon, const QDict *qdict)
> qapi_free_BlockJobInfoList(list);
> }
>
> +#endif /* CONFIG_LIVE_BLOCK_OPS */
> +
> void hmp_info_tpm(Monitor *mon, const QDict *qdict)
> {
> TPMInfoList *info_list, *info;
> @@ -1197,6 +1201,8 @@ void hmp_block_resize(Monitor *mon, const QDict *qdict)
> hmp_handle_error(mon, &err);
> }
>
> +#ifdef CONFIG_LIVE_BLOCK_OPS
> +
> void hmp_drive_mirror(Monitor *mon, const QDict *qdict)
> {
> const char *filename = qdict_get_str(qdict, "target");
> @@ -1280,6 +1286,8 @@ void hmp_snapshot_blkdev(Monitor *mon, const QDict *qdict)
> hmp_handle_error(mon, &err);
> }
>
> +#endif /* CONFIG_LIVE_BLOCK_OPS */
> +
> void hmp_snapshot_blkdev_internal(Monitor *mon, const QDict *qdict)
> {
> const char *device = qdict_get_str(qdict, "device");
> @@ -1776,6 +1784,8 @@ void hmp_block_set_io_throttle(Monitor *mon, const QDict *qdict)
> hmp_handle_error(mon, &err);
> }
>
> +#ifdef CONFIG_LIVE_BLOCK_OPS
> +
> void hmp_block_stream(Monitor *mon, const QDict *qdict)
> {
> Error *error = NULL;
> @@ -1842,6 +1852,8 @@ void hmp_block_job_complete(Monitor *mon, const QDict *qdict)
> hmp_handle_error(mon, &error);
> }
>
> +#endif /* CONFIG_LIVE_BLOCK_OPS */
> +
> typedef struct HMPMigrationStatus
> {
> QEMUTimer *timer;
> --
> 2.9.5
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
next prev parent reply other threads:[~2017-09-05 14:02 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-30 17:01 [Qemu-devel] [PATCH v2 0/3] Live block optional disable Jeff Cody
2017-08-30 17:01 ` [Qemu-devel] [PATCH v2 1/3] configure: Add option in configure to disable live block ops Jeff Cody
2017-08-30 17:01 ` [Qemu-devel] [PATCH v2 2/3] block-jobs: Optionally unregister live block operations Jeff Cody
2017-08-30 17:24 ` Eduardo Habkost
2017-08-30 19:23 ` Eric Blake
2017-08-31 6:45 ` Markus Armbruster
2017-09-06 13:00 ` [Qemu-devel] [Qemu-block] " Kevin Wolf
2017-09-06 15:02 ` Eduardo Habkost
2017-09-06 16:42 ` Eric Blake
2017-08-30 17:01 ` [Qemu-devel] [PATCH v2 3/3] hmp: Optionally disable live block operations in HMP monitor Jeff Cody
2017-09-05 14:01 ` Dr. David Alan Gilbert [this message]
2017-08-30 19:17 ` [Qemu-devel] [PATCH v2 0/3] Live block optional disable Eric Blake
2017-08-30 19:26 ` Eric Blake
2017-09-06 12:58 ` [Qemu-devel] [Qemu-block] " Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170905140124.GE2112@work-vm \
--to=dgilbert@redhat.com \
--cc=ehabkost@redhat.com \
--cc=jcody@redhat.com \
--cc=jsnow@redhat.com \
--cc=mrezanin@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).