From: Greg Kurz <groug@kaod.org>
To: Pradeep Jagadeesh <pradeepkiruvale@gmail.com>
Cc: eric blake <eblake@redhat.com>,
Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>,
alberto garcia <berto@igalia.com>,
Markus Armbruster <armbru@redhat.com>,
jani kokkonen <jani.kokkonen@huawei.com>,
qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v10 1/6] throttle: factor out duplicate code
Date: Wed, 6 Sep 2017 11:49:59 +0200 [thread overview]
Message-ID: <20170906114959.2c385643@bahia> (raw)
In-Reply-To: <1504541267-36954-2-git-send-email-pradeep.jagadeesh@huawei.com>
[-- Attachment #1: Type: text/plain, Size: 12314 bytes --]
With this patch applied, we get:
$ git log --no-decorate --oneline include/qemu/throttle-options.h
a54046b857be throttle: factor out duplicate code
a2a7862ca9ab throttle: factor out duplicate code
Maybe better to change the patch title to:
throttle: factor out more duplicate code
On Mon, 4 Sep 2017 12:07:42 -0400
Pradeep Jagadeesh <pradeepkiruvale@gmail.com> wrote:
> This patch factor out the duplicate throttle code that was present in
This patch factors out the duplicate throttle code that was still present in
> block and fsdev devices.
>
> Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
> Reviewed-by: Alberto Garcia <berto@igalia.com>
With the above fixed.
Reviewed-by: Greg Kurz <groug@kaod.org>
> ---
> blockdev.c | 44 +----------------------------------
> fsdev/qemu-fsdev-throttle.c | 44 ++---------------------------------
> include/qemu/throttle-options.h | 4 ++++
> include/qemu/throttle.h | 4 ++--
> include/qemu/typedefs.h | 1 +
> util/throttle.c | 51 +++++++++++++++++++++++++++++++++++++++++
> 6 files changed, 61 insertions(+), 87 deletions(-)
>
> diff --git a/blockdev.c b/blockdev.c
> index 02cd69b..780ae58 100644
> --- a/blockdev.c
> +++ b/blockdev.c
> @@ -388,49 +388,7 @@ static void extract_common_blockdev_options(QemuOpts *opts, int *bdrv_flags,
> }
>
> if (throttle_cfg) {
> - throttle_config_init(throttle_cfg);
> - throttle_cfg->buckets[THROTTLE_BPS_TOTAL].avg =
> - qemu_opt_get_number(opts, "throttling.bps-total", 0);
> - throttle_cfg->buckets[THROTTLE_BPS_READ].avg =
> - qemu_opt_get_number(opts, "throttling.bps-read", 0);
> - throttle_cfg->buckets[THROTTLE_BPS_WRITE].avg =
> - qemu_opt_get_number(opts, "throttling.bps-write", 0);
> - throttle_cfg->buckets[THROTTLE_OPS_TOTAL].avg =
> - qemu_opt_get_number(opts, "throttling.iops-total", 0);
> - throttle_cfg->buckets[THROTTLE_OPS_READ].avg =
> - qemu_opt_get_number(opts, "throttling.iops-read", 0);
> - throttle_cfg->buckets[THROTTLE_OPS_WRITE].avg =
> - qemu_opt_get_number(opts, "throttling.iops-write", 0);
> -
> - throttle_cfg->buckets[THROTTLE_BPS_TOTAL].max =
> - qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
> - throttle_cfg->buckets[THROTTLE_BPS_READ].max =
> - qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
> - throttle_cfg->buckets[THROTTLE_BPS_WRITE].max =
> - qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
> - throttle_cfg->buckets[THROTTLE_OPS_TOTAL].max =
> - qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
> - throttle_cfg->buckets[THROTTLE_OPS_READ].max =
> - qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
> - throttle_cfg->buckets[THROTTLE_OPS_WRITE].max =
> - qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
> -
> - throttle_cfg->buckets[THROTTLE_BPS_TOTAL].burst_length =
> - qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
> - throttle_cfg->buckets[THROTTLE_BPS_READ].burst_length =
> - qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
> - throttle_cfg->buckets[THROTTLE_BPS_WRITE].burst_length =
> - qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
> - throttle_cfg->buckets[THROTTLE_OPS_TOTAL].burst_length =
> - qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
> - throttle_cfg->buckets[THROTTLE_OPS_READ].burst_length =
> - qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
> - throttle_cfg->buckets[THROTTLE_OPS_WRITE].burst_length =
> - qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
> -
> - throttle_cfg->op_size =
> - qemu_opt_get_number(opts, "throttling.iops-size", 0);
> -
> + throttle_parse_options(throttle_cfg, opts);
> if (!throttle_is_valid(throttle_cfg, errp)) {
> return;
> }
> diff --git a/fsdev/qemu-fsdev-throttle.c b/fsdev/qemu-fsdev-throttle.c
> index 49eebb5..0e6fb86 100644
> --- a/fsdev/qemu-fsdev-throttle.c
> +++ b/fsdev/qemu-fsdev-throttle.c
> @@ -16,6 +16,7 @@
> #include "qemu/error-report.h"
> #include "qemu-fsdev-throttle.h"
> #include "qemu/iov.h"
> +#include "qemu/throttle-options.h"
>
> static void fsdev_throttle_read_timer_cb(void *opaque)
> {
> @@ -31,48 +32,7 @@ static void fsdev_throttle_write_timer_cb(void *opaque)
>
> void fsdev_throttle_parse_opts(QemuOpts *opts, FsThrottle *fst, Error **errp)
> {
> - throttle_config_init(&fst->cfg);
> - fst->cfg.buckets[THROTTLE_BPS_TOTAL].avg =
> - qemu_opt_get_number(opts, "throttling.bps-total", 0);
> - fst->cfg.buckets[THROTTLE_BPS_READ].avg =
> - qemu_opt_get_number(opts, "throttling.bps-read", 0);
> - fst->cfg.buckets[THROTTLE_BPS_WRITE].avg =
> - qemu_opt_get_number(opts, "throttling.bps-write", 0);
> - fst->cfg.buckets[THROTTLE_OPS_TOTAL].avg =
> - qemu_opt_get_number(opts, "throttling.iops-total", 0);
> - fst->cfg.buckets[THROTTLE_OPS_READ].avg =
> - qemu_opt_get_number(opts, "throttling.iops-read", 0);
> - fst->cfg.buckets[THROTTLE_OPS_WRITE].avg =
> - qemu_opt_get_number(opts, "throttling.iops-write", 0);
> -
> - fst->cfg.buckets[THROTTLE_BPS_TOTAL].max =
> - qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
> - fst->cfg.buckets[THROTTLE_BPS_READ].max =
> - qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
> - fst->cfg.buckets[THROTTLE_BPS_WRITE].max =
> - qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
> - fst->cfg.buckets[THROTTLE_OPS_TOTAL].max =
> - qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
> - fst->cfg.buckets[THROTTLE_OPS_READ].max =
> - qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
> - fst->cfg.buckets[THROTTLE_OPS_WRITE].max =
> - qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
> -
> - fst->cfg.buckets[THROTTLE_BPS_TOTAL].burst_length =
> - qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
> - fst->cfg.buckets[THROTTLE_BPS_READ].burst_length =
> - qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
> - fst->cfg.buckets[THROTTLE_BPS_WRITE].burst_length =
> - qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
> - fst->cfg.buckets[THROTTLE_OPS_TOTAL].burst_length =
> - qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
> - fst->cfg.buckets[THROTTLE_OPS_READ].burst_length =
> - qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
> - fst->cfg.buckets[THROTTLE_OPS_WRITE].burst_length =
> - qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
> - fst->cfg.op_size =
> - qemu_opt_get_number(opts, "throttling.iops-size", 0);
> -
> + throttle_parse_options(&fst->cfg, opts);
> throttle_is_valid(&fst->cfg, errp);
> }
>
> diff --git a/include/qemu/throttle-options.h b/include/qemu/throttle-options.h
> index 3133d1c..f63d38c 100644
> --- a/include/qemu/throttle-options.h
> +++ b/include/qemu/throttle-options.h
> @@ -10,6 +10,8 @@
> #ifndef THROTTLE_OPTIONS_H
> #define THROTTLE_OPTIONS_H
>
> +#include "typedefs.h"
> +
> #define THROTTLE_OPTS \
> { \
> .name = "throttling.iops-total",\
> @@ -89,4 +91,6 @@
> .help = "when limiting by iops max size of an I/O in bytes",\
> }
>
> +void throttle_parse_options(ThrottleConfig *, QemuOpts *);
> +
> #endif
> diff --git a/include/qemu/throttle.h b/include/qemu/throttle.h
> index d056008..75d930c 100644
> --- a/include/qemu/throttle.h
> +++ b/include/qemu/throttle.h
> @@ -89,10 +89,10 @@ typedef struct LeakyBucket {
> * However it allows to keep the code clean and the bucket field is reset to
> * zero at the right time.
> */
> -typedef struct ThrottleConfig {
> +struct ThrottleConfig {
> LeakyBucket buckets[BUCKETS_COUNT]; /* leaky buckets */
> uint64_t op_size; /* size of an operation in bytes */
> -} ThrottleConfig;
> +};
>
> typedef struct ThrottleState {
> ThrottleConfig cfg; /* configuration */
> diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h
> index 39bc835..90fe0f9 100644
> --- a/include/qemu/typedefs.h
> +++ b/include/qemu/typedefs.h
> @@ -100,6 +100,7 @@ typedef struct uWireSlave uWireSlave;
> typedef struct VirtIODevice VirtIODevice;
> typedef struct Visitor Visitor;
> typedef struct node_info NodeInfo;
> +typedef struct ThrottleConfig ThrottleConfig;
> typedef void SaveStateHandler(QEMUFile *f, void *opaque);
> typedef int LoadStateHandler(QEMUFile *f, void *opaque, int version_id);
>
> diff --git a/util/throttle.c b/util/throttle.c
> index b2a52b8..95c2ecf 100644
> --- a/util/throttle.c
> +++ b/util/throttle.c
> @@ -27,6 +27,7 @@
> #include "qemu/throttle.h"
> #include "qemu/timer.h"
> #include "block/aio.h"
> +#include "qemu/throttle-options.h"
>
> /* This function make a bucket leak
> *
> @@ -502,3 +503,53 @@ void throttle_account(ThrottleState *ts, bool is_write, uint64_t size)
> }
> }
>
> +/* parse the throttle options
> + *
> + * @opts: qemu options
> + * @throttle_cfg: throttle configuration
> + */
> +void throttle_parse_options(ThrottleConfig *throttle_cfg, QemuOpts *opts)
> +{
> + throttle_config_init(throttle_cfg);
> + throttle_cfg->buckets[THROTTLE_BPS_TOTAL].avg =
> + qemu_opt_get_number(opts, "throttling.bps-total", 0);
> + throttle_cfg->buckets[THROTTLE_BPS_READ].avg =
> + qemu_opt_get_number(opts, "throttling.bps-read", 0);
> + throttle_cfg->buckets[THROTTLE_BPS_WRITE].avg =
> + qemu_opt_get_number(opts, "throttling.bps-write", 0);
> + throttle_cfg->buckets[THROTTLE_OPS_TOTAL].avg =
> + qemu_opt_get_number(opts, "throttling.iops-total", 0);
> + throttle_cfg->buckets[THROTTLE_OPS_READ].avg =
> + qemu_opt_get_number(opts, "throttling.iops-read", 0);
> + throttle_cfg->buckets[THROTTLE_OPS_WRITE].avg =
> + qemu_opt_get_number(opts, "throttling.iops-write", 0);
> +
> + throttle_cfg->buckets[THROTTLE_BPS_TOTAL].max =
> + qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
> + throttle_cfg->buckets[THROTTLE_BPS_READ].max =
> + qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
> + throttle_cfg->buckets[THROTTLE_BPS_WRITE].max =
> + qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
> + throttle_cfg->buckets[THROTTLE_OPS_TOTAL].max =
> + qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
> + throttle_cfg->buckets[THROTTLE_OPS_READ].max =
> + qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
> + throttle_cfg->buckets[THROTTLE_OPS_WRITE].max =
> + qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
> +
> + throttle_cfg->buckets[THROTTLE_BPS_TOTAL].burst_length =
> + qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
> + throttle_cfg->buckets[THROTTLE_BPS_READ].burst_length =
> + qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
> + throttle_cfg->buckets[THROTTLE_BPS_WRITE].burst_length =
> + qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
> + throttle_cfg->buckets[THROTTLE_OPS_TOTAL].burst_length =
> + qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
> + throttle_cfg->buckets[THROTTLE_OPS_READ].burst_length =
> + qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
> + throttle_cfg->buckets[THROTTLE_OPS_WRITE].burst_length =
> + qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
> +
> + throttle_cfg->op_size =
> + qemu_opt_get_number(opts, "throttling.iops-size", 0);
> +}
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
next prev parent reply other threads:[~2017-09-06 9:50 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-04 16:07 [Qemu-devel] [PATCH v10 0/6] fsdev: qmp interface for io throttling Pradeep Jagadeesh
2017-09-04 16:07 ` [Qemu-devel] [PATCH v10 1/6] throttle: factor out duplicate code Pradeep Jagadeesh
2017-09-06 9:49 ` Greg Kurz [this message]
2017-09-04 16:07 ` [Qemu-devel] [PATCH v10 2/6] qmp: Create IOThrottle structure Pradeep Jagadeesh
2017-09-08 9:37 ` Markus Armbruster
2017-09-04 16:07 ` [Qemu-devel] [PATCH v10 3/6] throttle: move out function to reuse the code Pradeep Jagadeesh
2017-09-08 12:27 ` Greg Kurz
2017-09-04 16:07 ` [Qemu-devel] [PATCH v10 4/6] hmp: create a throttle initialization function for code reusability Pradeep Jagadeesh
2017-09-05 12:03 ` Alberto Garcia
2017-09-08 12:31 ` Greg Kurz
2017-09-04 16:07 ` [Qemu-devel] [PATCH v10 5/6] fsdev: QMP interface for throttling Pradeep Jagadeesh
2017-09-08 10:02 ` Markus Armbruster
2017-09-08 11:33 ` Alberto Garcia
2017-09-08 12:51 ` Markus Armbruster
2017-09-08 12:19 ` Pradeep Jagadeesh
2017-09-08 12:34 ` Markus Armbruster
2017-09-08 12:49 ` Pradeep Jagadeesh
2017-09-11 9:23 ` Pradeep Jagadeesh
2017-09-04 16:07 ` [Qemu-devel] [PATCH v10 6/6] fsdev: hmp " Pradeep Jagadeesh
2017-09-05 7:53 ` Alberto Garcia
2017-09-05 8:28 ` Pradeep Jagadeesh
2017-09-05 8:57 ` Greg Kurz
2017-09-05 9:07 ` Alberto Garcia
2017-09-05 9:13 ` Pradeep Jagadeesh
2017-09-05 9:34 ` Alberto Garcia
2017-09-05 9:36 ` Pradeep Jagadeesh
2017-09-05 17:57 ` Dr. David Alan Gilbert
2017-09-05 21:19 ` [Qemu-devel] [PATCH v10 0/6] fsdev: qmp interface for io throttling Eric Blake
2017-09-06 10:12 ` Pradeep Jagadeesh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170906114959.2c385643@bahia \
--to=groug@kaod.org \
--cc=armbru@redhat.com \
--cc=berto@igalia.com \
--cc=eblake@redhat.com \
--cc=jani.kokkonen@huawei.com \
--cc=pradeep.jagadeesh@huawei.com \
--cc=pradeepkiruvale@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).