From: Cornelia Huck <cohuck@redhat.com>
To: peter.maydell@linaro.org
Cc: qemu-devel@nongnu.org, rth@twiddle.net, agraf@suse.de,
thuth@redhat.com, borntraeger@de.ibm.com, david@redhat.com,
Yi Min Zhao <zyimin@linux.vnet.ibm.com>,
Cornelia Huck <cohuck@redhat.com>
Subject: [Qemu-devel] [PULL v2 03/38] s390x/pci: remove idx from msix msg data
Date: Tue, 19 Sep 2017 18:43:02 +0200 [thread overview]
Message-ID: <20170919164337.18555-4-cohuck@redhat.com> (raw)
In-Reply-To: <20170919164337.18555-1-cohuck@redhat.com>
From: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
PCIDevice pointer has been a parameter of kvm_arch_fixup_msi_route().
So we don't need to store zpci idx in msix message data to find out the
specific zpci device. Instead, we could use pci device id to find its
corresponding zpci device.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1504606380-49341-2-git-send-email-zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
---
hw/s390x/s390-pci-bus.c | 16 +++++-----------
hw/s390x/s390-pci-bus.h | 2 ++
hw/s390x/s390-pci-inst.c | 24 ------------------------
hw/s390x/s390-pci-stub.c | 3 ++-
target/s390x/kvm.c | 10 +++++++---
5 files changed, 16 insertions(+), 39 deletions(-)
diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c
index 0a31a4ae88..bd8a3e1e1c 100644
--- a/hw/s390x/s390-pci-bus.c
+++ b/hw/s390x/s390-pci-bus.c
@@ -199,8 +199,8 @@ static S390PCIBusDevice *s390_pci_find_dev_by_uid(S390pciState *s, uint16_t uid)
return NULL;
}
-static S390PCIBusDevice *s390_pci_find_dev_by_target(S390pciState *s,
- const char *target)
+S390PCIBusDevice *s390_pci_find_dev_by_target(S390pciState *s,
+ const char *target)
{
S390PCIBusDevice *pbdev;
@@ -465,19 +465,13 @@ static void s390_msi_ctrl_write(void *opaque, hwaddr addr, uint64_t data,
unsigned int size)
{
S390PCIBusDevice *pbdev = opaque;
- uint32_t idx = data >> ZPCI_MSI_VEC_BITS;
uint32_t vec = data & ZPCI_MSI_VEC_MASK;
uint64_t ind_bit;
uint32_t sum_bit;
- uint32_t e = 0;
- DPRINTF("write_msix data 0x%" PRIx64 " idx %d vec 0x%x\n", data, idx, vec);
-
- if (!pbdev) {
- e |= (vec << ERR_EVENT_MVN_OFFSET);
- s390_pci_generate_error_event(ERR_EVENT_NOMSI, idx, 0, addr, e);
- return;
- }
+ assert(pbdev);
+ DPRINTF("write_msix data 0x%" PRIx64 " idx %d vec 0x%x\n", data,
+ pbdev->idx, vec);
if (pbdev->state != ZPCI_FS_ENABLED) {
return;
diff --git a/hw/s390x/s390-pci-bus.h b/hw/s390x/s390-pci-bus.h
index bd636abc28..560bd82a0f 100644
--- a/hw/s390x/s390-pci-bus.h
+++ b/hw/s390x/s390-pci-bus.h
@@ -322,6 +322,8 @@ void s390_pci_generate_error_event(uint16_t pec, uint32_t fh, uint32_t fid,
S390PCIBusDevice *s390_pci_find_dev_by_idx(S390pciState *s, uint32_t idx);
S390PCIBusDevice *s390_pci_find_dev_by_fh(S390pciState *s, uint32_t fh);
S390PCIBusDevice *s390_pci_find_dev_by_fid(S390pciState *s, uint32_t fid);
+S390PCIBusDevice *s390_pci_find_dev_by_target(S390pciState *s,
+ const char *target);
S390PCIBusDevice *s390_pci_find_next_avail_dev(S390pciState *s,
S390PCIBusDevice *pbdev);
diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
index eba9ffb5f2..8e088f3dc9 100644
--- a/hw/s390x/s390-pci-inst.c
+++ b/hw/s390x/s390-pci-inst.c
@@ -413,29 +413,6 @@ int pcilg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
return 0;
}
-static void update_msix_table_msg_data(S390PCIBusDevice *pbdev, uint64_t offset,
- uint64_t *data, uint8_t len)
-{
- uint32_t val;
- uint8_t *msg_data;
-
- if (offset % PCI_MSIX_ENTRY_SIZE != 8) {
- return;
- }
-
- if (len != 4) {
- DPRINTF("access msix table msg data but len is %d\n", len);
- return;
- }
-
- msg_data = (uint8_t *)data - offset % PCI_MSIX_ENTRY_SIZE +
- PCI_MSIX_ENTRY_VECTOR_CTRL;
- val = pci_get_long(msg_data) |
- ((pbdev->fh & FH_MASK_INDEX) << ZPCI_MSI_VEC_BITS);
- pci_set_long(msg_data, val);
- DPRINTF("update msix msg_data to 0x%" PRIx64 "\n", *data);
-}
-
static int trap_msix(S390PCIBusDevice *pbdev, uint64_t offset, uint8_t pcias)
{
if (pbdev->msix.available && pbdev->msix.table_bar == pcias &&
@@ -508,7 +485,6 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
if (trap_msix(pbdev, offset, pcias)) {
offset = offset - pbdev->msix.table_offset;
mr = &pbdev->pdev->msix_table_mmio;
- update_msix_table_msg_data(pbdev, offset, &data, len);
} else {
mr = pbdev->pdev->io_regions[pcias].memory;
}
diff --git a/hw/s390x/s390-pci-stub.c b/hw/s390x/s390-pci-stub.c
index 7a642d376c..ad4c5a7719 100644
--- a/hw/s390x/s390-pci-stub.c
+++ b/hw/s390x/s390-pci-stub.c
@@ -70,7 +70,8 @@ S390pciState *s390_get_phb(void)
return NULL;
}
-S390PCIBusDevice *s390_pci_find_dev_by_idx(S390pciState *s, uint32_t idx)
+S390PCIBusDevice *s390_pci_find_dev_by_target(S390pciState *s,
+ const char *target)
{
return NULL;
}
diff --git a/target/s390x/kvm.c b/target/s390x/kvm.c
index ad7ce9fc70..1130a391d4 100644
--- a/target/s390x/kvm.c
+++ b/target/s390x/kvm.c
@@ -2423,12 +2423,16 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
uint64_t address, uint32_t data, PCIDevice *dev)
{
S390PCIBusDevice *pbdev;
- uint32_t idx = data >> ZPCI_MSI_VEC_BITS;
uint32_t vec = data & ZPCI_MSI_VEC_MASK;
- pbdev = s390_pci_find_dev_by_idx(s390_get_phb(), idx);
+ if (!dev) {
+ DPRINTF("add_msi_route no pci device\n");
+ return -ENODEV;
+ }
+
+ pbdev = s390_pci_find_dev_by_target(s390_get_phb(), DEVICE(dev)->id);
if (!pbdev) {
- DPRINTF("add_msi_route no dev\n");
+ DPRINTF("add_msi_route no zpci device\n");
return -ENODEV;
}
--
2.13.5
next prev parent reply other threads:[~2017-09-19 16:44 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-19 16:42 [Qemu-devel] [PULL v2 00/38] various s390x patches (+some fixes) Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 01/38] s390x/css: fix cc handling for XSCH Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 02/38] tests: Enable the drive_del test also on s390x Cornelia Huck
2017-09-19 16:43 ` Cornelia Huck [this message]
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 04/38] s390x/pci: fixup ind_offset of msix routing entry Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 05/38] s390x/pci: add iommu replay callback Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 06/38] hw/misc/ivshmem: Fix ivshmem_recv_msg() to also work on big endian systems Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 07/38] s390x/css: drop data-check in interpretation Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 08/38] s390x/css: fix NULL handling for CCW addresses Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 09/38] s390x/css: remove unused error handling branch Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 10/38] s390: set DHCP client architecure id for netboot Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 11/38] exec, dump, i386, ppc, s390x: don't include exec/cpu-all.h explicitly Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 12/38] cpu: drop old comments describing members Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 13/38] s390x: get rid of s390-virtio.c Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 14/38] s390x: rename s390-virtio.h to s390-virtio-hcall.h Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 15/38] s390x: move s390_virtio_hypercall() " Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 16/38] s390x: move subsystem_reset() to s390-virtio-ccw.h Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 17/38] target/s390x: move some s390x typedefs to cpu-qom.h Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 18/38] s390x: move sclp_service_call() to sclp.h Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 19/38] target/s390x: use trigger_pgm_exception() in s390_cpu_handle_mmu_fault() Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 20/38] target/s390x: use program_interrupt() in per_check_exception() Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 21/38] s390x: allow only 1 CPU with TCG Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 22/38] target/s390x: set cpu->id for linux user when realizing Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 23/38] target/s390x: use "core-id" for cpu number/address/id handling Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 24/38] target/s390x: rename next_cpu_id to next_core_id Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 25/38] s390x: print CPU definitions in sorted order Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 26/38] s390x: allow cpu hotplug via device_add Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 27/38] s390x: CPU hot unplug via device_del cannot work for now Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 28/38] s390x: implement query-hotpluggable-cpus Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 29/38] s390x: get rid of cpu_states and use possible_cpus instead Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 30/38] s390x: get rid of cpu_s390x_create() Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 31/38] s390x: generate sclp cpu information from possible_cpus Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 32/38] s390x: allow CPU hotplug in random core-id order Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 33/38] virtio-ccw: remove stale comments on endianness Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 34/38] configure: Allow --enable-seccomp on s390x, too Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 35/38] s390x/ccw: create s390 phb for compat reasons as well Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 36/38] virtio-gpu: Handle endian conversion Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 37/38] virtio-ccw: Create a virtio gpu device for the ccw bus Cornelia Huck
2017-09-19 16:43 ` [Qemu-devel] [PULL v2 38/38] MAINTAINERS/s390x: add terminal3270.c Cornelia Huck
2017-09-19 17:03 ` [Qemu-devel] [PULL v2 00/38] various s390x patches (+some fixes) Christian Borntraeger
2017-09-20 7:20 ` Cornelia Huck
2017-09-19 18:23 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170919164337.18555-4-cohuck@redhat.com \
--to=cohuck@redhat.com \
--cc=agraf@suse.de \
--cc=borntraeger@de.ibm.com \
--cc=david@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=thuth@redhat.com \
--cc=zyimin@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).