qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: David Gibson <david@gibson.dropbear.id.au>
To: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: qemu-devel@nongnu.org, qemu-ppc@nongnu.org
Subject: Re: [Qemu-devel] [PATCHv2] macio: convert pmac_ide_ops from old_mmio
Date: Wed, 20 Sep 2017 14:29:07 +1000	[thread overview]
Message-ID: <20170920042907.GC5520@umbus.fritz.box> (raw)
In-Reply-To: <1505851374-6408-1-git-send-email-mark.cave-ayland@ilande.co.uk>

[-- Attachment #1: Type: text/plain, Size: 6711 bytes --]

On Tue, Sep 19, 2017 at 09:02:54PM +0100, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

This didn't apply for me.  Can you rebase on top of ppc-for-2.11, please.

> ---
>  hw/ide/macio.c |  181 +++++++++++++++++++++++---------------------------------
>  1 file changed, 75 insertions(+), 106 deletions(-)
> 
> diff --git a/hw/ide/macio.c b/hw/ide/macio.c
> index db5db39..18ae952 100644
> --- a/hw/ide/macio.c
> +++ b/hw/ide/macio.c
> @@ -255,131 +255,100 @@ static void pmac_ide_flush(DBDMA_io *io)
>  }
>  
>  /* PowerMac IDE memory IO */
> -static void pmac_ide_writeb (void *opaque,
> -                             hwaddr addr, uint32_t val)
> +static uint64_t pmac_ide_read(void *opaque, hwaddr addr, unsigned size)
>  {
>      MACIOIDEState *d = opaque;
> -
> -    addr = (addr & 0xFFF) >> 4;
> -    switch (addr) {
> -    case 1 ... 7:
> -        ide_ioport_write(&d->bus, addr, val);
> -        break;
> -    case 8:
> -    case 22:
> -        ide_cmd_write(&d->bus, 0, val);
> +    uint64_t retval = 0xffffffff;
> +    int reg = addr >> 4;
> +
> +    switch (reg) {
> +    case 0x0:
> +        if (size == 2) {
> +            retval = ide_data_readw(&d->bus, 0);
> +        } else if (size == 4) {
> +            retval = ide_data_readl(&d->bus, 0);
> +        }
>          break;
> -    default:
> +    case 0x1 ... 0x7:
> +        if (size == 1) {
> +            retval = ide_ioport_read(&d->bus, reg);
> +        }
>          break;
> -    }
> -}
> -
> -static uint32_t pmac_ide_readb (void *opaque,hwaddr addr)
> -{
> -    uint8_t retval;
> -    MACIOIDEState *d = opaque;
> -
> -    addr = (addr & 0xFFF) >> 4;
> -    switch (addr) {
> -    case 1 ... 7:
> -        retval = ide_ioport_read(&d->bus, addr);
> +    case 0x8:
> +    case 0x16:
> +        if (size == 1) {
> +            retval = ide_status_read(&d->bus, 0);
> +        }
>          break;
> -    case 8:
> -    case 22:
> -        retval = ide_status_read(&d->bus, 0);
> +    case 0x20:
> +        if (size == 4) {
> +            retval = d->timing_reg;
> +        }
>          break;
> -    default:
> -        retval = 0xFF;
> +    case 0x30:
> +        /* This is an interrupt state register that only exists
> +         * in the KeyLargo and later variants. Bit 0x8000_0000
> +         * latches the DMA interrupt and has to be written to
> +         * clear. Bit 0x4000_0000 is an image of the disk
> +         * interrupt. MacOS X relies on this and will hang if
> +         * we don't provide at least the disk interrupt
> +         */
> +        if (size == 4) {
> +            retval = d->irq_reg;
> +        }
>          break;
>      }
> -    return retval;
> -}
>  
> -static void pmac_ide_writew (void *opaque,
> -                             hwaddr addr, uint32_t val)
> -{
> -    MACIOIDEState *d = opaque;
> -
> -    addr = (addr & 0xFFF) >> 4;
> -    val = bswap16(val);
> -    if (addr == 0) {
> -        ide_data_writew(&d->bus, 0, val);
> -    }
> -}
> -
> -static uint32_t pmac_ide_readw (void *opaque,hwaddr addr)
> -{
> -    uint16_t retval;
> -    MACIOIDEState *d = opaque;
> -
> -    addr = (addr & 0xFFF) >> 4;
> -    if (addr == 0) {
> -        retval = ide_data_readw(&d->bus, 0);
> -    } else {
> -        retval = 0xFFFF;
> -    }
> -    retval = bswap16(retval);
>      return retval;
>  }
>  
> -static void pmac_ide_writel (void *opaque,
> -                             hwaddr addr, uint32_t val)
> -{
> -    MACIOIDEState *d = opaque;
>  
> -    addr = (addr & 0xFFF) >> 4;
> -    val = bswap32(val);
> -    if (addr == 0) {
> -        ide_data_writel(&d->bus, 0, val);
> -    } else if (addr == 0x20) {
> -        d->timing_reg = val;
> -    } else if (addr == 0x30) {
> -        if (val & 0x80000000u) {
> -            d->irq_reg &= 0x7fffffff;
> -        }
> -    }
> -}
> -
> -static uint32_t pmac_ide_readl (void *opaque,hwaddr addr)
> +static void pmac_ide_write(void *opaque, hwaddr addr, uint64_t val,
> +                           unsigned size)
>  {
> -    uint32_t retval;
>      MACIOIDEState *d = opaque;
> -
> -    addr = (addr & 0xFFF) >> 4;
> -    if (addr == 0) {
> -        retval = ide_data_readl(&d->bus, 0);
> -    } else if (addr == 0x20) {
> -        retval = d->timing_reg;
> -    } else if (addr == 0x30) {
> -        /* This is an interrupt state register that only exists
> -         * in the KeyLargo and later variants. Bit 0x8000_0000
> -         * latches the DMA interrupt and has to be written to
> -         * clear. Bit 0x4000_0000 is an image of the disk
> -         * interrupt. MacOS X relies on this and will hang if
> -         * we don't provide at least the disk interrupt
> -         */
> -        retval = d->irq_reg;
> -    } else {
> -        retval = 0xFFFFFFFF;
> +    int reg = addr >> 4;
> +
> +    switch (reg) {
> +    case 0x0:
> +        if (size == 2) {
> +            ide_data_writew(&d->bus, 0, val);
> +        } else if (size == 4) {
> +            ide_data_writel(&d->bus, 0, val);
> +        }
> +        break;
> +    case 0x1 ... 0x7:
> +        if (size == 1) {
> +            ide_ioport_write(&d->bus, reg, val);
> +        }
> +        break;
> +    case 0x8:
> +    case 0x16:
> +        if (size == 1) {
> +            ide_cmd_write(&d->bus, 0, val);
> +        }
> +        break;
> +    case 0x20:
> +        if (size == 4) {
> +            d->timing_reg = val;
> +        }
> +        break;
> +    case 0x30:
> +        if (size == 4) {
> +            if (val & 0x80000000u) {
> +                d->irq_reg &= 0x7fffffff;
> +            }
> +        }
> +        break;
>      }
> -    retval = bswap32(retval);
> -    return retval;
>  }
>  
>  static const MemoryRegionOps pmac_ide_ops = {
> -    .old_mmio = {
> -        .write = {
> -            pmac_ide_writeb,
> -            pmac_ide_writew,
> -            pmac_ide_writel,
> -        },
> -        .read = {
> -            pmac_ide_readb,
> -            pmac_ide_readw,
> -            pmac_ide_readl,
> -        },
> -    },
> -    .endianness = DEVICE_NATIVE_ENDIAN,
> +    .read = pmac_ide_read,
> +    .write = pmac_ide_write,
> +    .valid.min_access_size = 1,
> +    .valid.max_access_size = 4,
> +    .endianness = DEVICE_LITTLE_ENDIAN,
>  };
>  
>  static const VMStateDescription vmstate_pmac = {

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  reply	other threads:[~2017-09-20  4:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-19 20:02 [Qemu-devel] [PATCHv2] macio: convert pmac_ide_ops from old_mmio Mark Cave-Ayland
2017-09-20  4:29 ` David Gibson [this message]
2017-09-20  5:56   ` Mark Cave-Ayland
2017-09-20  6:00     ` David Gibson
2017-09-20  6:28       ` Mark Cave-Ayland
2017-09-20  6:32         ` David Gibson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170920042907.GC5520@umbus.fritz.box \
    --to=david@gibson.dropbear.id.au \
    --cc=mark.cave-ayland@ilande.co.uk \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).