From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Cc: dgilbert@redhat.com, lvivier@redhat.com, peterx@redhat.com,
Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Subject: [Qemu-devel] [PULL 15/18] migration: split common postcopy out of ram postcopy
Date: Fri, 22 Sep 2017 01:08:09 +0200 [thread overview]
Message-ID: <20170921230812.7095-16-quintela@redhat.com> (raw)
In-Reply-To: <20170921230812.7095-1-quintela@redhat.com>
From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Split common postcopy staff from ram postcopy staff.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
migration/migration.c | 39 ++++++++++++++++++++++++++-------------
migration/migration.h | 2 ++
migration/savevm.c | 48 +++++++++++++++++++++++++++++++++++++++---------
3 files changed, 67 insertions(+), 22 deletions(-)
diff --git a/migration/migration.c b/migration/migration.c
index 067dd929c4..266cd39c36 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -1443,6 +1443,11 @@ bool migrate_postcopy_ram(void)
return s->enabled_capabilities[MIGRATION_CAPABILITY_POSTCOPY_RAM];
}
+bool migrate_postcopy(void)
+{
+ return migrate_postcopy_ram();
+}
+
bool migrate_auto_converge(void)
{
MigrationState *s;
@@ -1826,9 +1831,11 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
* need to tell the destination to throw any pages it's already received
* that are dirty
*/
- if (ram_postcopy_send_discard_bitmap(ms)) {
- error_report("postcopy send discard bitmap failed");
- goto fail;
+ if (migrate_postcopy_ram()) {
+ if (ram_postcopy_send_discard_bitmap(ms)) {
+ error_report("postcopy send discard bitmap failed");
+ goto fail;
+ }
}
/*
@@ -1837,8 +1844,10 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
* wrap their state up here
*/
qemu_file_set_rate_limit(ms->to_dst_file, INT64_MAX);
- /* Ping just for debugging, helps line traces up */
- qemu_savevm_send_ping(ms->to_dst_file, 2);
+ if (migrate_postcopy_ram()) {
+ /* Ping just for debugging, helps line traces up */
+ qemu_savevm_send_ping(ms->to_dst_file, 2);
+ }
/*
* While loading the device state we may trigger page transfer
@@ -1863,7 +1872,9 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
qemu_savevm_send_postcopy_listen(fb);
qemu_savevm_state_complete_precopy(fb, false, false);
- qemu_savevm_send_ping(fb, 3);
+ if (migrate_postcopy_ram()) {
+ qemu_savevm_send_ping(fb, 3);
+ }
qemu_savevm_send_postcopy_run(fb);
@@ -1898,11 +1909,13 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
qemu_mutex_unlock_iothread();
- /*
- * Although this ping is just for debug, it could potentially be
- * used for getting a better measurement of downtime at the source.
- */
- qemu_savevm_send_ping(ms->to_dst_file, 4);
+ if (migrate_postcopy_ram()) {
+ /*
+ * Although this ping is just for debug, it could potentially be
+ * used for getting a better measurement of downtime at the source.
+ */
+ qemu_savevm_send_ping(ms->to_dst_file, 4);
+ }
if (migrate_release_ram()) {
ram_postcopy_migrated_memory_release(ms);
@@ -2080,7 +2093,7 @@ static void *migration_thread(void *opaque)
qemu_savevm_send_ping(s->to_dst_file, 1);
}
- if (migrate_postcopy_ram()) {
+ if (migrate_postcopy()) {
/*
* Tell the destination that we *might* want to do postcopy later;
* if the other end can't do postcopy it should fail now, nice and
@@ -2113,7 +2126,7 @@ static void *migration_thread(void *opaque)
if (pending_size && pending_size >= threshold_size) {
/* Still a significant amount to transfer */
- if (migrate_postcopy_ram() &&
+ if (migrate_postcopy() &&
s->state != MIGRATION_STATUS_POSTCOPY_ACTIVE &&
pend_nonpost <= threshold_size &&
atomic_read(&s->start_postcopy)) {
diff --git a/migration/migration.h b/migration/migration.h
index 641290f51b..b83cceadc4 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -169,6 +169,8 @@ bool migration_is_blocked(Error **errp);
bool migration_in_postcopy(void);
MigrationState *migrate_get_current(void);
+bool migrate_postcopy(void);
+
bool migrate_release_ram(void);
bool migrate_postcopy_ram(void);
bool migrate_zero_blocks(void);
diff --git a/migration/savevm.c b/migration/savevm.c
index 9a48b7b4cb..231474da34 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -89,7 +89,7 @@ static struct mig_cmd_args {
[MIG_CMD_INVALID] = { .len = -1, .name = "INVALID" },
[MIG_CMD_OPEN_RETURN_PATH] = { .len = 0, .name = "OPEN_RETURN_PATH" },
[MIG_CMD_PING] = { .len = sizeof(uint32_t), .name = "PING" },
- [MIG_CMD_POSTCOPY_ADVISE] = { .len = 16, .name = "POSTCOPY_ADVISE" },
+ [MIG_CMD_POSTCOPY_ADVISE] = { .len = -1, .name = "POSTCOPY_ADVISE" },
[MIG_CMD_POSTCOPY_LISTEN] = { .len = 0, .name = "POSTCOPY_LISTEN" },
[MIG_CMD_POSTCOPY_RUN] = { .len = 0, .name = "POSTCOPY_RUN" },
[MIG_CMD_POSTCOPY_RAM_DISCARD] = {
@@ -98,6 +98,23 @@ static struct mig_cmd_args {
[MIG_CMD_MAX] = { .len = -1, .name = "MAX" },
};
+/* Note for MIG_CMD_POSTCOPY_ADVISE:
+ * The format of arguments is depending on postcopy mode:
+ * - postcopy RAM only
+ * uint64_t host page size
+ * uint64_t taget page size
+ *
+ * - postcopy RAM and postcopy dirty bitmaps
+ * format is the same as for postcopy RAM only
+ *
+ * - postcopy dirty bitmaps only
+ * Nothing. Command length field is 0.
+ *
+ * Be careful: adding a new postcopy entity with some other parameters should
+ * not break format self-description ability. Good way is to introduce some
+ * generic extendable format with an exception for two old entities.
+ */
+
static int announce_self_create(uint8_t *buf,
uint8_t *mac_addr)
{
@@ -861,12 +878,17 @@ int qemu_savevm_send_packaged(QEMUFile *f, const uint8_t *buf, size_t len)
/* Send prior to any postcopy transfer */
void qemu_savevm_send_postcopy_advise(QEMUFile *f)
{
- uint64_t tmp[2];
- tmp[0] = cpu_to_be64(ram_pagesize_summary());
- tmp[1] = cpu_to_be64(qemu_target_page_size());
+ if (migrate_postcopy_ram()) {
+ uint64_t tmp[2];
+ tmp[0] = cpu_to_be64(ram_pagesize_summary());
+ tmp[1] = cpu_to_be64(qemu_target_page_size());
- trace_qemu_savevm_send_postcopy_advise();
- qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_ADVISE, 16, (uint8_t *)tmp);
+ trace_qemu_savevm_send_postcopy_advise();
+ qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_ADVISE,
+ 16, (uint8_t *)tmp);
+ } else {
+ qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_ADVISE, 0, NULL);
+ }
}
/* Sent prior to starting the destination running in postcopy, discard pages
@@ -1354,6 +1376,10 @@ static int loadvm_postcopy_handle_advise(MigrationIncomingState *mis)
return -1;
}
+ if (!migrate_postcopy_ram()) {
+ return 0;
+ }
+
if (!postcopy_ram_supported_by_host()) {
postcopy_state_set(POSTCOPY_INCOMING_NONE);
return -1;
@@ -1564,7 +1590,9 @@ static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis)
* A rare case, we entered listen without having to do any discards,
* so do the setup that's normally done at the time of the 1st discard.
*/
- postcopy_ram_prepare_discard(mis);
+ if (migrate_postcopy_ram()) {
+ postcopy_ram_prepare_discard(mis);
+ }
}
/*
@@ -1572,8 +1600,10 @@ static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis)
* However, at this point the CPU shouldn't be running, and the IO
* shouldn't be doing anything yet so don't actually expect requests
*/
- if (postcopy_ram_enable_notify(mis)) {
- return -1;
+ if (migrate_postcopy_ram()) {
+ if (postcopy_ram_enable_notify(mis)) {
+ return -1;
+ }
}
if (mis->have_listen_thread) {
--
2.13.5
next prev parent reply other threads:[~2017-09-21 23:08 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-21 23:07 [Qemu-devel] [PULL 00/18] Migration PULL request Juan Quintela
2017-09-21 23:07 ` [Qemu-devel] [PULL 01/18] migration: Create migration_ioc_process_incoming() Juan Quintela
2017-09-21 23:07 ` [Qemu-devel] [PULL 02/18] migration: Teach it about G_SOURCE_REMOVE Juan Quintela
2017-09-21 23:07 ` [Qemu-devel] [PULL 03/18] migration: Add comments to channel functions Juan Quintela
2017-09-21 23:07 ` [Qemu-devel] [PULL 04/18] migration: Create migration_has_all_channels Juan Quintela
2017-09-21 23:07 ` [Qemu-devel] [PULL 05/18] migration: Add multifd capability Juan Quintela
2017-09-21 23:08 ` [Qemu-devel] [PULL 06/18] migration: Create x-multifd-channels parameter Juan Quintela
2017-09-21 23:08 ` [Qemu-devel] [PULL 07/18] migration: Create x-multifd-page-count parameter Juan Quintela
2017-09-21 23:08 ` [Qemu-devel] [PULL 08/18] migration: Create multifd migration threads Juan Quintela
2017-09-21 23:08 ` [Qemu-devel] [PULL 09/18] migration: Split migration_fd_process_incoming Juan Quintela
2017-09-21 23:08 ` [Qemu-devel] [PULL 10/18] bitmap: remove BITOP_WORD() Juan Quintela
2017-09-21 23:08 ` [Qemu-devel] [PULL 11/18] bitmap: introduce bitmap_count_one() Juan Quintela
2017-09-21 23:08 ` [Qemu-devel] [PULL 12/18] bitmap: provide to_le/from_le helpers Juan Quintela
2017-09-21 23:08 ` [Qemu-devel] [PULL 13/18] migration: add has_postcopy savevm handler Juan Quintela
2017-09-21 23:08 ` [Qemu-devel] [PULL 14/18] migration: fix ram_save_pending Juan Quintela
2017-09-21 23:08 ` Juan Quintela [this message]
2017-09-21 23:08 ` [Qemu-devel] [PULL 16/18] migration: pass MigrationIncomingState* into migration check functions Juan Quintela
2017-09-21 23:08 ` [Qemu-devel] [PULL 17/18] migration: fix hardcoded function name in error report Juan Quintela
2017-09-21 23:08 ` [Qemu-devel] [PULL 18/18] migration: split ufd_version_check onto receive/request features part Juan Quintela
2017-09-21 23:29 ` [Qemu-devel] [PULL 00/18] Migration PULL request no-reply
2017-09-22 5:51 ` Peter Xu
2017-09-22 8:25 ` Juan Quintela
2017-09-22 8:39 ` Thomas Huth
2017-09-22 8:44 ` Peter Maydell
-- strict thread matches above, loose matches on Subject: below --
2017-09-22 12:24 [Qemu-devel] [PULL 00/18] Migration PULL request (3rd try) Juan Quintela
2017-09-22 12:25 ` [Qemu-devel] [PULL 15/18] migration: split common postcopy out of ram postcopy Juan Quintela
2018-02-05 9:49 ` Greg Kurz
2018-02-05 12:11 ` Vladimir Sementsov-Ogievskiy
2018-02-05 13:19 ` Greg Kurz
2018-02-05 13:12 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170921230812.7095-16-quintela@redhat.com \
--to=quintela@redhat.com \
--cc=dgilbert@redhat.com \
--cc=lvivier@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=vsementsov@virtuozzo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).