qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, jsnow@redhat.com, famz@redhat.com,
	vsementsov@virtuozzo.com, qemu-block@nongnu.org,
	Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v10 03/20] qcow2: Ensure bitmap serialization is aligned
Date: Mon, 25 Sep 2017 09:55:09 -0500	[thread overview]
Message-ID: <20170925145526.32690-4-eblake@redhat.com> (raw)
In-Reply-To: <20170925145526.32690-1-eblake@redhat.com>

When subdividing a bitmap serialization, the code in hbitmap.c
enforces that start/count parameters are aligned (except that
count can end early at end-of-bitmap).  We exposed this required
alignment through bdrv_dirty_bitmap_serialization_align(), but
forgot to actually check that we comply with it.

Fortunately, qcow2 is never dividing bitmap serialization smaller
than one cluster (which is a minimum of 512 bytes); so we are
always compliant with the serialization alignment (which insists
that we partition at least 64 bits per chunk) because we are doing
at least 4k bits per chunk.

Still, it's safer to add an assertion (for the unlikely case that
we'd ever support a cluster smaller than 512 bytes, or if the
hbitmap implementation changes what it considers to be aligned),
rather than leaving bdrv_dirty_bitmap_serialization_align()
without a caller.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>

---
v5: no change
v4: new patch
---
 block/qcow2-bitmap.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/block/qcow2-bitmap.c b/block/qcow2-bitmap.c
index e8d3bdbd6e..b3ee4c794a 100644
--- a/block/qcow2-bitmap.c
+++ b/block/qcow2-bitmap.c
@@ -274,10 +274,13 @@ static int free_bitmap_clusters(BlockDriverState *bs, Qcow2BitmapTable *tb)
 static uint64_t sectors_covered_by_bitmap_cluster(const BDRVQcow2State *s,
                                                   const BdrvDirtyBitmap *bitmap)
 {
-    uint32_t sector_granularity =
+    uint64_t sector_granularity =
             bdrv_dirty_bitmap_granularity(bitmap) >> BDRV_SECTOR_BITS;
+    uint64_t sbc = sector_granularity * (s->cluster_size << 3);

-    return (uint64_t)sector_granularity * (s->cluster_size << 3);
+    assert(QEMU_IS_ALIGNED(sbc,
+                           bdrv_dirty_bitmap_serialization_align(bitmap)));
+    return sbc;
 }

 /* load_bitmap_data
-- 
2.13.5

  parent reply	other threads:[~2017-09-25 14:56 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-25 14:55 [Qemu-devel] [PATCH v10 00/20] make dirty-bitmap byte-based Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 01/20] block: Make bdrv_img_create() size selection easier to read Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 02/20] hbitmap: Rename serialization_granularity to serialization_align Eric Blake
2017-09-25 14:55 ` Eric Blake [this message]
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 04/20] dirty-bitmap: Drop unused functions Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 05/20] dirty-bitmap: Avoid size query failure during truncate Eric Blake
2017-09-25 15:23   ` Vladimir Sementsov-Ogievskiy
2017-09-25 15:46     ` Eric Blake
2017-10-02 16:06       ` Kevin Wolf
2017-09-25 20:54   ` John Snow
2017-09-26  1:25   ` Fam Zheng
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 06/20] dirty-bitmap: Change bdrv_dirty_bitmap_size() to report bytes Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 07/20] dirty-bitmap: Track bitmap size by bytes Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 08/20] dirty-bitmap: Change bdrv_dirty_bitmap_*serialize*() to take bytes Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 09/20] qcow2: Switch sectors_covered_by_bitmap_cluster() to byte-based Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 10/20] dirty-bitmap: Set iterator start by offset, not sector Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 11/20] dirty-bitmap: Change bdrv_dirty_iter_next() to report byte offset Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 12/20] dirty-bitmap: Change bdrv_get_dirty_count() to report bytes Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 13/20] dirty-bitmap: Change bdrv_get_dirty_locked() to take bytes Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 14/20] dirty-bitmap: Change bdrv_[re]set_dirty_bitmap() to use bytes Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 15/20] mirror: Switch mirror_dirty_init() to byte-based iteration Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 16/20] qcow2: Switch qcow2_measure() " Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 17/20] qcow2: Switch load_bitmap_data() " Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 18/20] qcow2: Switch store_bitmap_data() " Eric Blake
2017-09-25 15:22   ` Vladimir Sementsov-Ogievskiy
2017-09-25 21:00   ` John Snow
2017-09-26  1:30   ` Fam Zheng
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 19/20] dirty-bitmap: Switch bdrv_set_dirty() to bytes Eric Blake
2017-09-25 14:55 ` [Qemu-devel] [PATCH v10 20/20] dirty-bitmap: Convert internal hbitmap size/granularity Eric Blake
2017-09-25 22:18 ` [Qemu-devel] [PATCH v10 00/20] make dirty-bitmap byte-based John Snow
2017-10-02 16:22 ` Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170925145526.32690-4-eblake@redhat.com \
    --to=eblake@redhat.com \
    --cc=famz@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=vsementsov@virtuozzo.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).