From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 14/54] dirty-bitmap: Change bdrv_get_dirty_locked() to take bytes
Date: Fri, 6 Oct 2017 17:53:42 +0200 [thread overview]
Message-ID: <20171006155422.10135-15-kwolf@redhat.com> (raw)
In-Reply-To: <20171006155422.10135-1-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
Half the callers were already scaling bytes to sectors; the other
half can eventually be simplified to use byte iteration. Both
callers were already using the result as a bool, so make that
explicit. Making the change also makes it easier for a future
dirty-bitmap patch to offload scaling over to the internal hbitmap.
Remember, asking whether a byte is dirty is effectively asking
whether the entire granularity containing the byte is dirty, since
we only track dirtiness by granularity.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/block/dirty-bitmap.h | 4 ++--
block/dirty-bitmap.c | 8 ++++----
block/mirror.c | 3 +--
migration/block.c | 3 ++-
4 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/include/block/dirty-bitmap.h b/include/block/dirty-bitmap.h
index 757fc4c5b8..9e39537e4b 100644
--- a/include/block/dirty-bitmap.h
+++ b/include/block/dirty-bitmap.h
@@ -72,8 +72,8 @@ void bdrv_dirty_bitmap_set_persistance(BdrvDirtyBitmap *bitmap,
/* Functions that require manual locking. */
void bdrv_dirty_bitmap_lock(BdrvDirtyBitmap *bitmap);
void bdrv_dirty_bitmap_unlock(BdrvDirtyBitmap *bitmap);
-int bdrv_get_dirty_locked(BlockDriverState *bs, BdrvDirtyBitmap *bitmap,
- int64_t sector);
+bool bdrv_get_dirty_locked(BlockDriverState *bs, BdrvDirtyBitmap *bitmap,
+ int64_t offset);
void bdrv_set_dirty_bitmap_locked(BdrvDirtyBitmap *bitmap,
int64_t cur_sector, int64_t nr_sectors);
void bdrv_reset_dirty_bitmap_locked(BdrvDirtyBitmap *bitmap,
diff --git a/block/dirty-bitmap.c b/block/dirty-bitmap.c
index 8322e23f0d..ad559c62b1 100644
--- a/block/dirty-bitmap.c
+++ b/block/dirty-bitmap.c
@@ -438,13 +438,13 @@ BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
}
/* Called within bdrv_dirty_bitmap_lock..unlock */
-int bdrv_get_dirty_locked(BlockDriverState *bs, BdrvDirtyBitmap *bitmap,
- int64_t sector)
+bool bdrv_get_dirty_locked(BlockDriverState *bs, BdrvDirtyBitmap *bitmap,
+ int64_t offset)
{
if (bitmap) {
- return hbitmap_get(bitmap->bitmap, sector);
+ return hbitmap_get(bitmap->bitmap, offset >> BDRV_SECTOR_BITS);
} else {
- return 0;
+ return false;
}
}
diff --git a/block/mirror.c b/block/mirror.c
index c5212d2c8d..545dfc50aa 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -361,8 +361,7 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)
int64_t next_offset = offset + nb_chunks * s->granularity;
int64_t next_chunk = next_offset / s->granularity;
if (next_offset >= s->bdev_length ||
- !bdrv_get_dirty_locked(source, s->dirty_bitmap,
- next_offset >> BDRV_SECTOR_BITS)) {
+ !bdrv_get_dirty_locked(source, s->dirty_bitmap, next_offset)) {
break;
}
if (test_bit(next_chunk, s->in_flight_bitmap)) {
diff --git a/migration/block.c b/migration/block.c
index cbcadce168..f5bcf5505c 100644
--- a/migration/block.c
+++ b/migration/block.c
@@ -535,7 +535,8 @@ static int mig_save_device_dirty(QEMUFile *f, BlkMigDevState *bmds,
blk_mig_unlock();
}
bdrv_dirty_bitmap_lock(bmds->dirty_bitmap);
- if (bdrv_get_dirty_locked(bs, bmds->dirty_bitmap, sector)) {
+ if (bdrv_get_dirty_locked(bs, bmds->dirty_bitmap,
+ sector * BDRV_SECTOR_SIZE)) {
if (total_sectors - sector < BDRV_SECTORS_PER_DIRTY_CHUNK) {
nr_sectors = total_sectors - sector;
} else {
--
2.13.6
next prev parent reply other threads:[~2017-10-06 15:55 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-06 15:53 [Qemu-devel] [PULL 00/54] Block layer patches Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 01/54] block: Typo fix in copy_on_readv() Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 02/54] block: Make bdrv_img_create() size selection easier to read Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 03/54] hbitmap: Rename serialization_granularity to serialization_align Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 04/54] qcow2: Ensure bitmap serialization is aligned Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 05/54] dirty-bitmap: Drop unused functions Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 06/54] dirty-bitmap: Avoid size query failure during truncate Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 07/54] dirty-bitmap: Change bdrv_dirty_bitmap_size() to report bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 08/54] dirty-bitmap: Track bitmap size by bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 09/54] dirty-bitmap: Change bdrv_dirty_bitmap_*serialize*() to take bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 10/54] qcow2: Switch sectors_covered_by_bitmap_cluster() to byte-based Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 11/54] dirty-bitmap: Set iterator start by offset, not sector Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 12/54] dirty-bitmap: Change bdrv_dirty_iter_next() to report byte offset Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 13/54] dirty-bitmap: Change bdrv_get_dirty_count() to report bytes Kevin Wolf
2017-10-06 15:53 ` Kevin Wolf [this message]
2017-10-06 15:53 ` [Qemu-devel] [PULL 15/54] dirty-bitmap: Change bdrv_[re]set_dirty_bitmap() to use bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 16/54] mirror: Switch mirror_dirty_init() to byte-based iteration Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 17/54] qcow2: Switch qcow2_measure() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 18/54] qcow2: Switch load_bitmap_data() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 19/54] qcow2: Switch store_bitmap_data() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 20/54] dirty-bitmap: Switch bdrv_set_dirty() to bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 21/54] dirty-bitmap: Convert internal hbitmap size/granularity Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 22/54] hw/block/onenand: Remove dead code block Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 23/54] qemu-iotests: remove dead code Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 24/54] qemu-iotests: get rid of AWK_PROG Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 25/54] qemu-iotests: move "check" code out of common.rc Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 26/54] qemu-iotests: cleanup and fix search for programs Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 27/54] qemu-iotests: limit non-_PROG-suffixed variables to common.rc Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 28/54] qemu-iotests: do not include common.rc in "check" Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 29/54] qemu-iotests: disintegrate more parts of common.config Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 30/54] qemu-iotests: fix uninitialized variable Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 31/54] qemu-iotests: get rid of $iam Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 32/54] qemu-iotests: merge "check" and "common" Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 33/54] block: Introduce BdrvChildRole.update_filename Kevin Wolf
2017-11-03 18:34 ` Peter Maydell
2017-10-06 15:54 ` [Qemu-devel] [PULL 34/54] commit: Support multiple roots above top node Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 35/54] qemu-iotests: Allow QMP pretty printing in common.qemu Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 36/54] qemu-iotests: Test commit block job where top has two parents Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 37/54] commit: Remove overlay_bs Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 38/54] qemu-io: Add -C for opening with copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 39/54] block: Uniform handling of 0-length bdrv_get_block_status() Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 40/54] iotests: Restore stty settings on completion Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 41/54] block: Add blkdebug hook for copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 42/54] block: Perform copy-on-read in loop Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 43/54] iotests: Add test 197 for covering copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 44/54] block: use 1 MB bounce buffers for crypto instead of 16KB Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 45/54] crypto: expose encryption sector size in APIs Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 46/54] block: fix data type casting for crypto payload offset Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 47/54] block: convert crypto driver to bdrv_co_preadv|pwritev Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 48/54] block: convert qcrypto_block_encrypt|decrypt to take bytes offset Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 49/54] block: support passthrough of BDRV_REQ_FUA in crypto driver Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 50/54] block/mirror: check backing in bdrv_mirror_top_refresh_filename Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 51/54] iotests: Fix 195 if IMGFMT is part of TEST_DIR Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 52/54] qcow2: fix return error code in qcow2_truncate() Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 53/54] qcow2: truncate the tail of the image file after shrinking the image Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 54/54] block/mirror: check backing in bdrv_mirror_top_flush Kevin Wolf
2017-10-06 18:01 ` [Qemu-devel] [PULL 00/54] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171006155422.10135-15-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).