qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 20/54] dirty-bitmap: Switch bdrv_set_dirty() to bytes
Date: Fri,  6 Oct 2017 17:53:48 +0200	[thread overview]
Message-ID: <20171006155422.10135-21-kwolf@redhat.com> (raw)
In-Reply-To: <20171006155422.10135-1-kwolf@redhat.com>

From: Eric Blake <eblake@redhat.com>

Both callers already had bytes available, but were scaling to
sectors.  Move the scaling to internal code.  In the case of
bdrv_aligned_pwritev(), we are now passing the exact offset
rather than a rounded sector-aligned value, but that's okay
as long as dirty bitmap widens start/bytes to granularity
boundaries.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 include/block/block_int.h | 2 +-
 block/dirty-bitmap.c      | 7 ++++---
 block/io.c                | 6 ++----
 3 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/include/block/block_int.h b/include/block/block_int.h
index 99abe2ce74..79366b94b5 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -1028,7 +1028,7 @@ void blk_dev_eject_request(BlockBackend *blk, bool force);
 bool blk_dev_is_tray_open(BlockBackend *blk);
 bool blk_dev_is_medium_locked(BlockBackend *blk);
 
-void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector, int64_t nr_sect);
+void bdrv_set_dirty(BlockDriverState *bs, int64_t offset, int64_t bytes);
 bool bdrv_requests_pending(BlockDriverState *bs);
 
 void bdrv_clear_dirty_bitmap(BdrvDirtyBitmap *bitmap, HBitmap **out);
diff --git a/block/dirty-bitmap.c b/block/dirty-bitmap.c
index 117837b3cc..58a3f330a9 100644
--- a/block/dirty-bitmap.c
+++ b/block/dirty-bitmap.c
@@ -628,10 +628,10 @@ void bdrv_dirty_bitmap_deserialize_finish(BdrvDirtyBitmap *bitmap)
     hbitmap_deserialize_finish(bitmap->bitmap);
 }
 
-void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
-                    int64_t nr_sectors)
+void bdrv_set_dirty(BlockDriverState *bs, int64_t offset, int64_t bytes)
 {
     BdrvDirtyBitmap *bitmap;
+    int64_t end_sector = DIV_ROUND_UP(offset + bytes, BDRV_SECTOR_SIZE);
 
     if (QLIST_EMPTY(&bs->dirty_bitmaps)) {
         return;
@@ -643,7 +643,8 @@ void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
             continue;
         }
         assert(!bdrv_dirty_bitmap_readonly(bitmap));
-        hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
+        hbitmap_set(bitmap->bitmap, offset >> BDRV_SECTOR_BITS,
+                    end_sector - (offset >> BDRV_SECTOR_BITS));
     }
     bdrv_dirty_bitmaps_unlock(bs);
 }
diff --git a/block/io.c b/block/io.c
index d633b0f851..e0f904583f 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1334,7 +1334,6 @@ static int coroutine_fn bdrv_aligned_pwritev(BdrvChild *child,
     bool waited;
     int ret;
 
-    int64_t start_sector = offset >> BDRV_SECTOR_BITS;
     int64_t end_sector = DIV_ROUND_UP(offset + bytes, BDRV_SECTOR_SIZE);
     uint64_t bytes_remaining = bytes;
     int max_transfer;
@@ -1409,7 +1408,7 @@ static int coroutine_fn bdrv_aligned_pwritev(BdrvChild *child,
     bdrv_debug_event(bs, BLKDBG_PWRITEV_DONE);
 
     atomic_inc(&bs->write_gen);
-    bdrv_set_dirty(bs, start_sector, end_sector - start_sector);
+    bdrv_set_dirty(bs, offset, bytes);
 
     stat64_max(&bs->wr_highest_offset, offset + bytes);
 
@@ -2438,8 +2437,7 @@ int coroutine_fn bdrv_co_pdiscard(BlockDriverState *bs, int64_t offset,
     ret = 0;
 out:
     atomic_inc(&bs->write_gen);
-    bdrv_set_dirty(bs, req.offset >> BDRV_SECTOR_BITS,
-                   req.bytes >> BDRV_SECTOR_BITS);
+    bdrv_set_dirty(bs, req.offset, req.bytes);
     tracked_request_end(&req);
     bdrv_dec_in_flight(bs);
     return ret;
-- 
2.13.6

  parent reply	other threads:[~2017-10-06 15:55 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-06 15:53 [Qemu-devel] [PULL 00/54] Block layer patches Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 01/54] block: Typo fix in copy_on_readv() Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 02/54] block: Make bdrv_img_create() size selection easier to read Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 03/54] hbitmap: Rename serialization_granularity to serialization_align Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 04/54] qcow2: Ensure bitmap serialization is aligned Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 05/54] dirty-bitmap: Drop unused functions Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 06/54] dirty-bitmap: Avoid size query failure during truncate Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 07/54] dirty-bitmap: Change bdrv_dirty_bitmap_size() to report bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 08/54] dirty-bitmap: Track bitmap size by bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 09/54] dirty-bitmap: Change bdrv_dirty_bitmap_*serialize*() to take bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 10/54] qcow2: Switch sectors_covered_by_bitmap_cluster() to byte-based Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 11/54] dirty-bitmap: Set iterator start by offset, not sector Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 12/54] dirty-bitmap: Change bdrv_dirty_iter_next() to report byte offset Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 13/54] dirty-bitmap: Change bdrv_get_dirty_count() to report bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 14/54] dirty-bitmap: Change bdrv_get_dirty_locked() to take bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 15/54] dirty-bitmap: Change bdrv_[re]set_dirty_bitmap() to use bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 16/54] mirror: Switch mirror_dirty_init() to byte-based iteration Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 17/54] qcow2: Switch qcow2_measure() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 18/54] qcow2: Switch load_bitmap_data() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 19/54] qcow2: Switch store_bitmap_data() " Kevin Wolf
2017-10-06 15:53 ` Kevin Wolf [this message]
2017-10-06 15:53 ` [Qemu-devel] [PULL 21/54] dirty-bitmap: Convert internal hbitmap size/granularity Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 22/54] hw/block/onenand: Remove dead code block Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 23/54] qemu-iotests: remove dead code Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 24/54] qemu-iotests: get rid of AWK_PROG Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 25/54] qemu-iotests: move "check" code out of common.rc Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 26/54] qemu-iotests: cleanup and fix search for programs Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 27/54] qemu-iotests: limit non-_PROG-suffixed variables to common.rc Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 28/54] qemu-iotests: do not include common.rc in "check" Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 29/54] qemu-iotests: disintegrate more parts of common.config Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 30/54] qemu-iotests: fix uninitialized variable Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 31/54] qemu-iotests: get rid of $iam Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 32/54] qemu-iotests: merge "check" and "common" Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 33/54] block: Introduce BdrvChildRole.update_filename Kevin Wolf
2017-11-03 18:34   ` Peter Maydell
2017-10-06 15:54 ` [Qemu-devel] [PULL 34/54] commit: Support multiple roots above top node Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 35/54] qemu-iotests: Allow QMP pretty printing in common.qemu Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 36/54] qemu-iotests: Test commit block job where top has two parents Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 37/54] commit: Remove overlay_bs Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 38/54] qemu-io: Add -C for opening with copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 39/54] block: Uniform handling of 0-length bdrv_get_block_status() Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 40/54] iotests: Restore stty settings on completion Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 41/54] block: Add blkdebug hook for copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 42/54] block: Perform copy-on-read in loop Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 43/54] iotests: Add test 197 for covering copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 44/54] block: use 1 MB bounce buffers for crypto instead of 16KB Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 45/54] crypto: expose encryption sector size in APIs Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 46/54] block: fix data type casting for crypto payload offset Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 47/54] block: convert crypto driver to bdrv_co_preadv|pwritev Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 48/54] block: convert qcrypto_block_encrypt|decrypt to take bytes offset Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 49/54] block: support passthrough of BDRV_REQ_FUA in crypto driver Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 50/54] block/mirror: check backing in bdrv_mirror_top_refresh_filename Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 51/54] iotests: Fix 195 if IMGFMT is part of TEST_DIR Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 52/54] qcow2: fix return error code in qcow2_truncate() Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 53/54] qcow2: truncate the tail of the image file after shrinking the image Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 54/54] block/mirror: check backing in bdrv_mirror_top_flush Kevin Wolf
2017-10-06 18:01 ` [Qemu-devel] [PULL 00/54] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171006155422.10135-21-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).