From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 03/54] hbitmap: Rename serialization_granularity to serialization_align
Date: Fri, 6 Oct 2017 17:53:31 +0200 [thread overview]
Message-ID: <20171006155422.10135-4-kwolf@redhat.com> (raw)
In-Reply-To: <20171006155422.10135-1-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
The only client of hbitmap_serialization_granularity() is dirty-bitmap's
bdrv_dirty_bitmap_serialization_align(). Keeping the two names consistent
is worthwhile, and the shorter name is more representative of what the
function returns (the required alignment to be used for start/count of
other serialization functions, where violating the alignment causes
assertion failures).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/qemu/hbitmap.h | 8 ++++----
block/dirty-bitmap.c | 2 +-
tests/test-hbitmap.c | 10 +++++-----
util/hbitmap.c | 8 ++++----
4 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/include/qemu/hbitmap.h b/include/qemu/hbitmap.h
index d3a74a21fc..81e78043d1 100644
--- a/include/qemu/hbitmap.h
+++ b/include/qemu/hbitmap.h
@@ -159,16 +159,16 @@ bool hbitmap_get(const HBitmap *hb, uint64_t item);
bool hbitmap_is_serializable(const HBitmap *hb);
/**
- * hbitmap_serialization_granularity:
+ * hbitmap_serialization_align:
* @hb: HBitmap to operate on.
*
- * Granularity of serialization chunks, used by other serialization functions.
- * For every chunk:
+ * Required alignment of serialization chunks, used by other serialization
+ * functions. For every chunk:
* 1. Chunk start should be aligned to this granularity.
* 2. Chunk size should be aligned too, except for last chunk (for which
* start + count == hb->size)
*/
-uint64_t hbitmap_serialization_granularity(const HBitmap *hb);
+uint64_t hbitmap_serialization_align(const HBitmap *hb);
/**
* hbitmap_serialization_size:
diff --git a/block/dirty-bitmap.c b/block/dirty-bitmap.c
index 30462d4f9a..0490ca3aff 100644
--- a/block/dirty-bitmap.c
+++ b/block/dirty-bitmap.c
@@ -617,7 +617,7 @@ uint64_t bdrv_dirty_bitmap_serialization_size(const BdrvDirtyBitmap *bitmap,
uint64_t bdrv_dirty_bitmap_serialization_align(const BdrvDirtyBitmap *bitmap)
{
- return hbitmap_serialization_granularity(bitmap->bitmap);
+ return hbitmap_serialization_align(bitmap->bitmap);
}
void bdrv_dirty_bitmap_serialize_part(const BdrvDirtyBitmap *bitmap,
diff --git a/tests/test-hbitmap.c b/tests/test-hbitmap.c
index 1acb353889..af41642346 100644
--- a/tests/test-hbitmap.c
+++ b/tests/test-hbitmap.c
@@ -738,15 +738,15 @@ static void test_hbitmap_meta_one(TestHBitmapData *data, const void *unused)
}
}
-static void test_hbitmap_serialize_granularity(TestHBitmapData *data,
- const void *unused)
+static void test_hbitmap_serialize_align(TestHBitmapData *data,
+ const void *unused)
{
int r;
hbitmap_test_init(data, L3 * 2, 3);
g_assert(hbitmap_is_serializable(data->hb));
- r = hbitmap_serialization_granularity(data->hb);
+ r = hbitmap_serialization_align(data->hb);
g_assert_cmpint(r, ==, 64 << 3);
}
@@ -974,8 +974,8 @@ int main(int argc, char **argv)
hbitmap_test_add("/hbitmap/meta/word", test_hbitmap_meta_word);
hbitmap_test_add("/hbitmap/meta/sector", test_hbitmap_meta_sector);
- hbitmap_test_add("/hbitmap/serialize/granularity",
- test_hbitmap_serialize_granularity);
+ hbitmap_test_add("/hbitmap/serialize/align",
+ test_hbitmap_serialize_align);
hbitmap_test_add("/hbitmap/serialize/basic",
test_hbitmap_serialize_basic);
hbitmap_test_add("/hbitmap/serialize/part",
diff --git a/util/hbitmap.c b/util/hbitmap.c
index 21535cc90b..2f9d0fdbd0 100644
--- a/util/hbitmap.c
+++ b/util/hbitmap.c
@@ -413,14 +413,14 @@ bool hbitmap_is_serializable(const HBitmap *hb)
{
/* Every serialized chunk must be aligned to 64 bits so that endianness
* requirements can be fulfilled on both 64 bit and 32 bit hosts.
- * We have hbitmap_serialization_granularity() which converts this
+ * We have hbitmap_serialization_align() which converts this
* alignment requirement from bitmap bits to items covered (e.g. sectors).
* That value is:
* 64 << hb->granularity
* Since this value must not exceed UINT64_MAX, hb->granularity must be
* less than 58 (== 64 - 6, where 6 is ld(64), i.e. 1 << 6 == 64).
*
- * In order for hbitmap_serialization_granularity() to always return a
+ * In order for hbitmap_serialization_align() to always return a
* meaningful value, bitmaps that are to be serialized must have a
* granularity of less than 58. */
@@ -437,7 +437,7 @@ bool hbitmap_get(const HBitmap *hb, uint64_t item)
return (hb->levels[HBITMAP_LEVELS - 1][pos >> BITS_PER_LEVEL] & bit) != 0;
}
-uint64_t hbitmap_serialization_granularity(const HBitmap *hb)
+uint64_t hbitmap_serialization_align(const HBitmap *hb)
{
assert(hbitmap_is_serializable(hb));
@@ -454,7 +454,7 @@ static void serialization_chunk(const HBitmap *hb,
unsigned long **first_el, uint64_t *el_count)
{
uint64_t last = start + count - 1;
- uint64_t gran = hbitmap_serialization_granularity(hb);
+ uint64_t gran = hbitmap_serialization_align(hb);
assert((start & (gran - 1)) == 0);
assert((last >> hb->granularity) < hb->size);
--
2.13.6
next prev parent reply other threads:[~2017-10-06 15:54 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-06 15:53 [Qemu-devel] [PULL 00/54] Block layer patches Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 01/54] block: Typo fix in copy_on_readv() Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 02/54] block: Make bdrv_img_create() size selection easier to read Kevin Wolf
2017-10-06 15:53 ` Kevin Wolf [this message]
2017-10-06 15:53 ` [Qemu-devel] [PULL 04/54] qcow2: Ensure bitmap serialization is aligned Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 05/54] dirty-bitmap: Drop unused functions Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 06/54] dirty-bitmap: Avoid size query failure during truncate Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 07/54] dirty-bitmap: Change bdrv_dirty_bitmap_size() to report bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 08/54] dirty-bitmap: Track bitmap size by bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 09/54] dirty-bitmap: Change bdrv_dirty_bitmap_*serialize*() to take bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 10/54] qcow2: Switch sectors_covered_by_bitmap_cluster() to byte-based Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 11/54] dirty-bitmap: Set iterator start by offset, not sector Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 12/54] dirty-bitmap: Change bdrv_dirty_iter_next() to report byte offset Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 13/54] dirty-bitmap: Change bdrv_get_dirty_count() to report bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 14/54] dirty-bitmap: Change bdrv_get_dirty_locked() to take bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 15/54] dirty-bitmap: Change bdrv_[re]set_dirty_bitmap() to use bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 16/54] mirror: Switch mirror_dirty_init() to byte-based iteration Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 17/54] qcow2: Switch qcow2_measure() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 18/54] qcow2: Switch load_bitmap_data() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 19/54] qcow2: Switch store_bitmap_data() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 20/54] dirty-bitmap: Switch bdrv_set_dirty() to bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 21/54] dirty-bitmap: Convert internal hbitmap size/granularity Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 22/54] hw/block/onenand: Remove dead code block Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 23/54] qemu-iotests: remove dead code Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 24/54] qemu-iotests: get rid of AWK_PROG Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 25/54] qemu-iotests: move "check" code out of common.rc Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 26/54] qemu-iotests: cleanup and fix search for programs Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 27/54] qemu-iotests: limit non-_PROG-suffixed variables to common.rc Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 28/54] qemu-iotests: do not include common.rc in "check" Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 29/54] qemu-iotests: disintegrate more parts of common.config Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 30/54] qemu-iotests: fix uninitialized variable Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 31/54] qemu-iotests: get rid of $iam Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 32/54] qemu-iotests: merge "check" and "common" Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 33/54] block: Introduce BdrvChildRole.update_filename Kevin Wolf
2017-11-03 18:34 ` Peter Maydell
2017-10-06 15:54 ` [Qemu-devel] [PULL 34/54] commit: Support multiple roots above top node Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 35/54] qemu-iotests: Allow QMP pretty printing in common.qemu Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 36/54] qemu-iotests: Test commit block job where top has two parents Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 37/54] commit: Remove overlay_bs Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 38/54] qemu-io: Add -C for opening with copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 39/54] block: Uniform handling of 0-length bdrv_get_block_status() Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 40/54] iotests: Restore stty settings on completion Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 41/54] block: Add blkdebug hook for copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 42/54] block: Perform copy-on-read in loop Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 43/54] iotests: Add test 197 for covering copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 44/54] block: use 1 MB bounce buffers for crypto instead of 16KB Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 45/54] crypto: expose encryption sector size in APIs Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 46/54] block: fix data type casting for crypto payload offset Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 47/54] block: convert crypto driver to bdrv_co_preadv|pwritev Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 48/54] block: convert qcrypto_block_encrypt|decrypt to take bytes offset Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 49/54] block: support passthrough of BDRV_REQ_FUA in crypto driver Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 50/54] block/mirror: check backing in bdrv_mirror_top_refresh_filename Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 51/54] iotests: Fix 195 if IMGFMT is part of TEST_DIR Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 52/54] qcow2: fix return error code in qcow2_truncate() Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 53/54] qcow2: truncate the tail of the image file after shrinking the image Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 54/54] block/mirror: check backing in bdrv_mirror_top_flush Kevin Wolf
2017-10-06 18:01 ` [Qemu-devel] [PULL 00/54] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171006155422.10135-4-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).