qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 08/54] dirty-bitmap: Track bitmap size by bytes
Date: Fri,  6 Oct 2017 17:53:36 +0200	[thread overview]
Message-ID: <20171006155422.10135-9-kwolf@redhat.com> (raw)
In-Reply-To: <20171006155422.10135-1-kwolf@redhat.com>

From: Eric Blake <eblake@redhat.com>

We are still using an internal hbitmap that tracks a size in sectors,
with the granularity scaled down accordingly, because it lets us
use a shortcut for our iterators which are currently sector-based.
But there's no reason we can't track the dirty bitmap size in bytes,
since it is (mostly) an internal-only variable (remember, the size
is how many bytes are covered by the bitmap, not how many bytes the
bitmap occupies).  A later cleanup will convert dirty bitmap
internals to be entirely byte-based, eliminating the intermediate
sector rounding added here; and technically, since bdrv_getlength()
already rounds up to sectors, our use of DIV_ROUND_UP is more for
theoretical completeness than for any actual rounding.

Use is_power_of_2() while at it, instead of open-coding that.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/dirty-bitmap.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/block/dirty-bitmap.c b/block/dirty-bitmap.c
index 755555af32..6d32554b4e 100644
--- a/block/dirty-bitmap.c
+++ b/block/dirty-bitmap.c
@@ -42,7 +42,7 @@ struct BdrvDirtyBitmap {
     HBitmap *meta;              /* Meta dirty bitmap */
     BdrvDirtyBitmap *successor; /* Anonymous child; implies frozen status */
     char *name;                 /* Optional non-empty unique ID */
-    int64_t size;               /* Size of the bitmap (Number of sectors) */
+    int64_t size;               /* Size of the bitmap, in bytes */
     bool disabled;              /* Bitmap is disabled. It ignores all writes to
                                    the device */
     int active_iterators;       /* How many iterators are active */
@@ -115,17 +115,14 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs,
 {
     int64_t bitmap_size;
     BdrvDirtyBitmap *bitmap;
-    uint32_t sector_granularity;
 
-    assert((granularity & (granularity - 1)) == 0);
+    assert(is_power_of_2(granularity) && granularity >= BDRV_SECTOR_SIZE);
 
     if (name && bdrv_find_dirty_bitmap(bs, name)) {
         error_setg(errp, "Bitmap already exists: %s", name);
         return NULL;
     }
-    sector_granularity = granularity >> BDRV_SECTOR_BITS;
-    assert(sector_granularity);
-    bitmap_size = bdrv_nb_sectors(bs);
+    bitmap_size = bdrv_getlength(bs);
     if (bitmap_size < 0) {
         error_setg_errno(errp, -bitmap_size, "could not get length of device");
         errno = -bitmap_size;
@@ -133,7 +130,12 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs,
     }
     bitmap = g_new0(BdrvDirtyBitmap, 1);
     bitmap->mutex = &bs->dirty_bitmap_mutex;
-    bitmap->bitmap = hbitmap_alloc(bitmap_size, ctz32(sector_granularity));
+    /*
+     * TODO - let hbitmap track full granularity. For now, it is tracking
+     * only sector granularity, as a shortcut for our iterators.
+     */
+    bitmap->bitmap = hbitmap_alloc(DIV_ROUND_UP(bitmap_size, BDRV_SECTOR_SIZE),
+                                   ctz32(granularity) - BDRV_SECTOR_BITS);
     bitmap->size = bitmap_size;
     bitmap->name = g_strdup(name);
     bitmap->disabled = false;
@@ -175,7 +177,7 @@ void bdrv_release_meta_dirty_bitmap(BdrvDirtyBitmap *bitmap)
 
 int64_t bdrv_dirty_bitmap_size(const BdrvDirtyBitmap *bitmap)
 {
-    return bitmap->size * BDRV_SECTOR_SIZE;
+    return bitmap->size;
 }
 
 const char *bdrv_dirty_bitmap_name(const BdrvDirtyBitmap *bitmap)
@@ -305,14 +307,13 @@ BdrvDirtyBitmap *bdrv_reclaim_dirty_bitmap(BlockDriverState *bs,
 void bdrv_dirty_bitmap_truncate(BlockDriverState *bs, int64_t bytes)
 {
     BdrvDirtyBitmap *bitmap;
-    int64_t size = DIV_ROUND_UP(bytes, BDRV_SECTOR_SIZE);
 
     bdrv_dirty_bitmaps_lock(bs);
     QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
         assert(!bdrv_dirty_bitmap_frozen(bitmap));
         assert(!bitmap->active_iterators);
-        hbitmap_truncate(bitmap->bitmap, size);
-        bitmap->size = size;
+        hbitmap_truncate(bitmap->bitmap, DIV_ROUND_UP(bytes, BDRV_SECTOR_SIZE));
+        bitmap->size = bytes;
     }
     bdrv_dirty_bitmaps_unlock(bs);
 }
@@ -549,7 +550,8 @@ void bdrv_clear_dirty_bitmap(BdrvDirtyBitmap *bitmap, HBitmap **out)
         hbitmap_reset_all(bitmap->bitmap);
     } else {
         HBitmap *backup = bitmap->bitmap;
-        bitmap->bitmap = hbitmap_alloc(bitmap->size,
+        bitmap->bitmap = hbitmap_alloc(DIV_ROUND_UP(bitmap->size,
+                                                    BDRV_SECTOR_SIZE),
                                        hbitmap_granularity(backup));
         *out = backup;
     }
-- 
2.13.6

  parent reply	other threads:[~2017-10-06 15:54 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-06 15:53 [Qemu-devel] [PULL 00/54] Block layer patches Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 01/54] block: Typo fix in copy_on_readv() Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 02/54] block: Make bdrv_img_create() size selection easier to read Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 03/54] hbitmap: Rename serialization_granularity to serialization_align Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 04/54] qcow2: Ensure bitmap serialization is aligned Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 05/54] dirty-bitmap: Drop unused functions Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 06/54] dirty-bitmap: Avoid size query failure during truncate Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 07/54] dirty-bitmap: Change bdrv_dirty_bitmap_size() to report bytes Kevin Wolf
2017-10-06 15:53 ` Kevin Wolf [this message]
2017-10-06 15:53 ` [Qemu-devel] [PULL 09/54] dirty-bitmap: Change bdrv_dirty_bitmap_*serialize*() to take bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 10/54] qcow2: Switch sectors_covered_by_bitmap_cluster() to byte-based Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 11/54] dirty-bitmap: Set iterator start by offset, not sector Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 12/54] dirty-bitmap: Change bdrv_dirty_iter_next() to report byte offset Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 13/54] dirty-bitmap: Change bdrv_get_dirty_count() to report bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 14/54] dirty-bitmap: Change bdrv_get_dirty_locked() to take bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 15/54] dirty-bitmap: Change bdrv_[re]set_dirty_bitmap() to use bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 16/54] mirror: Switch mirror_dirty_init() to byte-based iteration Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 17/54] qcow2: Switch qcow2_measure() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 18/54] qcow2: Switch load_bitmap_data() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 19/54] qcow2: Switch store_bitmap_data() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 20/54] dirty-bitmap: Switch bdrv_set_dirty() to bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 21/54] dirty-bitmap: Convert internal hbitmap size/granularity Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 22/54] hw/block/onenand: Remove dead code block Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 23/54] qemu-iotests: remove dead code Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 24/54] qemu-iotests: get rid of AWK_PROG Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 25/54] qemu-iotests: move "check" code out of common.rc Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 26/54] qemu-iotests: cleanup and fix search for programs Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 27/54] qemu-iotests: limit non-_PROG-suffixed variables to common.rc Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 28/54] qemu-iotests: do not include common.rc in "check" Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 29/54] qemu-iotests: disintegrate more parts of common.config Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 30/54] qemu-iotests: fix uninitialized variable Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 31/54] qemu-iotests: get rid of $iam Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 32/54] qemu-iotests: merge "check" and "common" Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 33/54] block: Introduce BdrvChildRole.update_filename Kevin Wolf
2017-11-03 18:34   ` Peter Maydell
2017-10-06 15:54 ` [Qemu-devel] [PULL 34/54] commit: Support multiple roots above top node Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 35/54] qemu-iotests: Allow QMP pretty printing in common.qemu Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 36/54] qemu-iotests: Test commit block job where top has two parents Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 37/54] commit: Remove overlay_bs Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 38/54] qemu-io: Add -C for opening with copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 39/54] block: Uniform handling of 0-length bdrv_get_block_status() Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 40/54] iotests: Restore stty settings on completion Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 41/54] block: Add blkdebug hook for copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 42/54] block: Perform copy-on-read in loop Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 43/54] iotests: Add test 197 for covering copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 44/54] block: use 1 MB bounce buffers for crypto instead of 16KB Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 45/54] crypto: expose encryption sector size in APIs Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 46/54] block: fix data type casting for crypto payload offset Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 47/54] block: convert crypto driver to bdrv_co_preadv|pwritev Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 48/54] block: convert qcrypto_block_encrypt|decrypt to take bytes offset Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 49/54] block: support passthrough of BDRV_REQ_FUA in crypto driver Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 50/54] block/mirror: check backing in bdrv_mirror_top_refresh_filename Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 51/54] iotests: Fix 195 if IMGFMT is part of TEST_DIR Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 52/54] qcow2: fix return error code in qcow2_truncate() Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 53/54] qcow2: truncate the tail of the image file after shrinking the image Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 54/54] block/mirror: check backing in bdrv_mirror_top_flush Kevin Wolf
2017-10-06 18:01 ` [Qemu-devel] [PULL 00/54] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171006155422.10135-9-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).