From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, kwolf@redhat.com, famz@redhat.com,
jsnow@redhat.com, Ronnie Sahlberg <ronniesahlberg@gmail.com>,
Paolo Bonzini <pbonzini@redhat.com>, Peter Lieven <pl@kamp.de>,
Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v4 07/20] iscsi: Switch to .bdrv_co_block_status()
Date: Thu, 12 Oct 2017 13:59:03 -0500 [thread overview]
Message-ID: <20171012185916.22776-8-eblake@redhat.com> (raw)
In-Reply-To: <20171012185916.22776-1-eblake@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the iscsi driver accordingly. In this case,
it is handy to teach iscsi_co_block_status() to handle a NULL map
and file parameter, even though the block layer passes non-NULL
values, because we also call the function directly. For now, there
are no optimizations done based on the want_zero flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
v4: rebase to interface tweaks
v3: no change
v2: rebase to mapping parameter
---
block/iscsi.c | 64 +++++++++++++++++++++++++++++------------------------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/block/iscsi.c b/block/iscsi.c
index 4896d50d6e..cb30e9652c 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -647,28 +647,31 @@ out_unlock:
-static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors, int *pnum,
- BlockDriverState **file)
+static int coroutine_fn iscsi_co_block_status(BlockDriverState *bs,
+ bool want_zero, int64_t offset,
+ int64_t bytes, int64_t *pnum,
+ int64_t *map,
+ BlockDriverState **file)
{
IscsiLun *iscsilun = bs->opaque;
struct scsi_get_lba_status *lbas = NULL;
struct scsi_lba_status_descriptor *lbasd = NULL;
struct IscsiTask iTask;
- int64_t ret;
+ int ret;
iscsi_co_init_iscsitask(iscsilun, &iTask);
- if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
+ if (!is_byte_request_lun_aligned(offset, bytes, iscsilun)) {
ret = -EINVAL;
goto out;
}
/* default to all sectors allocated */
- ret = BDRV_BLOCK_DATA;
- ret |= (sector_num << BDRV_SECTOR_BITS) | BDRV_BLOCK_OFFSET_VALID;
- *pnum = nb_sectors;
+ ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
+ if (map) {
+ *map = offset;
+ }
+ *pnum = bytes;
/* LUN does not support logical block provisioning */
if (!iscsilun->lbpme) {
@@ -678,7 +681,7 @@ static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
qemu_mutex_lock(&iscsilun->mutex);
retry:
if (iscsi_get_lba_status_task(iscsilun->iscsi, iscsilun->lun,
- sector_qemu2lun(sector_num, iscsilun),
+ offset / iscsilun->block_size,
8 + 16, iscsi_co_generic_cb,
&iTask) == NULL) {
ret = -ENOMEM;
@@ -717,12 +720,12 @@ retry:
lbasd = &lbas->descriptors[0];
- if (sector_qemu2lun(sector_num, iscsilun) != lbasd->lba) {
+ if (offset / iscsilun->block_size != lbasd->lba) {
ret = -EIO;
goto out_unlock;
}
- *pnum = sector_lun2qemu(lbasd->num_blocks, iscsilun);
+ *pnum = lbasd->num_blocks * iscsilun->block_size;
if (lbasd->provisioning == SCSI_PROVISIONING_TYPE_DEALLOCATED ||
lbasd->provisioning == SCSI_PROVISIONING_TYPE_ANCHORED) {
@@ -733,15 +736,13 @@ retry:
}
if (ret & BDRV_BLOCK_ZERO) {
- iscsi_allocmap_set_unallocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
- *pnum * BDRV_SECTOR_SIZE);
+ iscsi_allocmap_set_unallocated(iscsilun, offset, *pnum);
} else {
- iscsi_allocmap_set_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
- *pnum * BDRV_SECTOR_SIZE);
+ iscsi_allocmap_set_allocated(iscsilun, offset, *pnum);
}
- if (*pnum > nb_sectors) {
- *pnum = nb_sectors;
+ if (*pnum > bytes) {
+ *pnum = bytes;
}
out_unlock:
qemu_mutex_unlock(&iscsilun->mutex);
@@ -749,7 +750,7 @@ out:
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
}
- if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID) {
+ if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID && file) {
*file = bs;
}
return ret;
@@ -788,25 +789,24 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
nb_sectors * BDRV_SECTOR_SIZE) &&
!iscsi_allocmap_is_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
nb_sectors * BDRV_SECTOR_SIZE)) {
- int pnum;
- BlockDriverState *file;
+ int64_t pnum;
/* check the block status from the beginning of the cluster
* containing the start sector */
- int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
- int head;
- int64_t ret;
+ int64_t head;
+ int ret;
- assert(cluster_sectors);
- head = sector_num % cluster_sectors;
- ret = iscsi_co_get_block_status(bs, sector_num - head,
- BDRV_REQUEST_MAX_SECTORS, &pnum,
- &file);
+ assert(iscsilun->cluster_size);
+ head = (sector_num * BDRV_SECTOR_SIZE) % iscsilun->cluster_size;
+ ret = iscsi_co_block_status(bs, false,
+ sector_num * BDRV_SECTOR_SIZE - head,
+ BDRV_REQUEST_MAX_BYTES, &pnum, NULL, NULL);
if (ret < 0) {
return ret;
}
/* if the whole request falls into an unallocated area we can avoid
* reading and directly return zeroes instead */
- if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors + head) {
+ if (ret & BDRV_BLOCK_ZERO &&
+ pnum >= nb_sectors * BDRV_SECTOR_SIZE + head) {
qemu_iovec_memset(iov, 0, 0x00, iov->size);
return 0;
}
@@ -2192,7 +2192,7 @@ static BlockDriver bdrv_iscsi = {
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
- .bdrv_co_get_block_status = iscsi_co_get_block_status,
+ .bdrv_co_block_status = iscsi_co_block_status,
.bdrv_co_pdiscard = iscsi_co_pdiscard,
.bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
@@ -2227,7 +2227,7 @@ static BlockDriver bdrv_iser = {
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
- .bdrv_co_get_block_status = iscsi_co_get_block_status,
+ .bdrv_co_block_status = iscsi_co_block_status,
.bdrv_co_pdiscard = iscsi_co_pdiscard,
.bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
--
2.13.6
next prev parent reply other threads:[~2017-10-12 19:03 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-12 18:58 [Qemu-devel] [PATCH v4 00/20] add byte-based block_status driver callbacks Eric Blake
2017-10-12 18:58 ` [Qemu-devel] [PATCH v4 01/20] block: Add .bdrv_co_block_status() callback Eric Blake
2017-11-28 8:02 ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:58 ` [Qemu-devel] [PATCH v4 02/20] block: Switch passthrough drivers to .bdrv_co_block_status() Eric Blake
2017-11-28 8:19 ` Vladimir Sementsov-Ogievskiy
2017-11-28 16:05 ` Eric Blake
2017-10-12 18:58 ` [Qemu-devel] [PATCH v4 03/20] file-posix: Switch " Eric Blake
2017-11-30 8:06 ` Vladimir Sementsov-Ogievskiy
2017-11-30 20:40 ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 04/20] gluster: " Eric Blake
2017-11-30 8:44 ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 05/20] iscsi: Switch cluster_sectors to byte-based Eric Blake
2017-10-18 9:20 ` Paolo Bonzini
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 06/20] iscsi: Switch iscsi_allocmap_update() " Eric Blake
2017-10-18 9:20 ` Paolo Bonzini
2017-10-12 18:59 ` Eric Blake [this message]
2017-10-18 9:20 ` [Qemu-devel] [PATCH v4 07/20] iscsi: Switch to .bdrv_co_block_status() Paolo Bonzini
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 08/20] null: " Eric Blake
2017-11-30 8:47 ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 09/20] parallels: " Eric Blake
2017-11-30 9:03 ` Vladimir Sementsov-Ogievskiy
2017-11-30 22:12 ` Eric Blake
2017-11-30 22:18 ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 10/20] qcow: " Eric Blake
2017-11-30 9:26 ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 11/20] qcow2: " Eric Blake
2017-11-30 9:51 ` Vladimir Sementsov-Ogievskiy
2017-11-30 22:38 ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 12/20] qed: " Eric Blake
2017-11-30 10:27 ` Vladimir Sementsov-Ogievskiy
2017-11-30 23:17 ` Eric Blake
2017-12-04 8:59 ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 13/20] raw: " Eric Blake
2017-11-30 11:10 ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 14/20] sheepdog: " Eric Blake
2017-11-30 11:13 ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 15/20] vdi: Avoid bitrot of debugging code Eric Blake
2017-11-30 11:17 ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 16/20] vdi: Switch to .bdrv_co_block_status() Eric Blake
2017-11-30 11:26 ` Vladimir Sementsov-Ogievskiy
2017-11-30 23:11 ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 17/20] vmdk: " Eric Blake
2017-11-30 11:39 ` Vladimir Sementsov-Ogievskiy
2017-11-30 23:18 ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 18/20] vpc: " Eric Blake
2017-11-30 12:22 ` Vladimir Sementsov-Ogievskiy
2017-11-30 23:28 ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 19/20] vvfat: " Eric Blake
2017-11-30 12:25 ` Vladimir Sementsov-Ogievskiy
2017-11-30 23:31 ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 20/20] block: Drop unused .bdrv_co_get_block_status() Eric Blake
2017-11-30 12:29 ` Vladimir Sementsov-Ogievskiy
2017-11-21 11:27 ` [Qemu-devel] [PATCH v4 00/20] add byte-based block_status driver callbacks Vladimir Sementsov-Ogievskiy
2017-11-21 12:28 ` Eric Blake
2017-11-30 13:04 ` Vladimir Sementsov-Ogievskiy
2017-11-30 15:36 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171012185916.22776-8-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=famz@redhat.com \
--cc=jsnow@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=pbonzini@redhat.com \
--cc=pl@kamp.de \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=ronniesahlberg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).