From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: Andrea Arcangeli <aarcange@redhat.com>,
"Daniel P . Berrange" <berrange@redhat.com>,
Juan Quintela <quintela@redhat.com>,
Alexey Perevalov <a.perevalov@samsung.com>,
"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
peterx@redhat.com
Subject: [Qemu-devel] [PATCH v3 17/32] migration: new cmd MIG_CMD_POSTCOPY_RESUME
Date: Mon, 16 Oct 2017 14:52:01 +0800 [thread overview]
Message-ID: <20171016065216.18162-18-peterx@redhat.com> (raw)
In-Reply-To: <20171016065216.18162-1-peterx@redhat.com>
Introducing this new command to be sent when the source VM is ready to
resume the paused migration. What the destination does here is
basically release the fault thread to continue service page faults.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
---
migration/savevm.c | 35 +++++++++++++++++++++++++++++++++++
migration/savevm.h | 1 +
migration/trace-events | 2 ++
3 files changed, 38 insertions(+)
diff --git a/migration/savevm.c b/migration/savevm.c
index 2148b198c7..bb6639812b 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -77,6 +77,7 @@ enum qemu_vm_cmd {
MIG_CMD_POSTCOPY_RAM_DISCARD, /* A list of pages to discard that
were previously sent during
precopy but are dirty. */
+ MIG_CMD_POSTCOPY_RESUME, /* resume postcopy on dest */
MIG_CMD_PACKAGED, /* Send a wrapped stream within this stream */
MIG_CMD_RECV_BITMAP, /* Request for recved bitmap on dst */
MIG_CMD_MAX
@@ -95,6 +96,7 @@ static struct mig_cmd_args {
[MIG_CMD_POSTCOPY_RUN] = { .len = 0, .name = "POSTCOPY_RUN" },
[MIG_CMD_POSTCOPY_RAM_DISCARD] = {
.len = -1, .name = "POSTCOPY_RAM_DISCARD" },
+ [MIG_CMD_POSTCOPY_RESUME] = { .len = 0, .name = "POSTCOPY_RESUME" },
[MIG_CMD_PACKAGED] = { .len = 4, .name = "PACKAGED" },
[MIG_CMD_RECV_BITMAP] = { .len = -1, .name = "RECV_BITMAP" },
[MIG_CMD_MAX] = { .len = -1, .name = "MAX" },
@@ -955,6 +957,12 @@ void qemu_savevm_send_postcopy_run(QEMUFile *f)
qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_RUN, 0, NULL);
}
+void qemu_savevm_send_postcopy_resume(QEMUFile *f)
+{
+ trace_savevm_send_postcopy_resume();
+ qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_RESUME, 0, NULL);
+}
+
void qemu_savevm_send_recv_bitmap(QEMUFile *f, char *block_name)
{
size_t len;
@@ -1727,6 +1735,30 @@ static int loadvm_postcopy_handle_run(MigrationIncomingState *mis)
return LOADVM_QUIT;
}
+static int loadvm_postcopy_handle_resume(MigrationIncomingState *mis)
+{
+ if (mis->state != MIGRATION_STATUS_POSTCOPY_RECOVER) {
+ error_report("%s: illegal resume received", __func__);
+ /* Don't fail the load, only for this. */
+ return 0;
+ }
+
+ /*
+ * This means source VM is ready to resume the postcopy migration.
+ * It's time to switch state and release the fault thread to
+ * continue service page faults.
+ */
+ migrate_set_state(&mis->state, MIGRATION_STATUS_POSTCOPY_RECOVER,
+ MIGRATION_STATUS_POSTCOPY_ACTIVE);
+ qemu_sem_post(&mis->postcopy_pause_sem_fault);
+
+ trace_loadvm_postcopy_handle_resume();
+
+ /* TODO: Tell source that "we are ready" */
+
+ return 0;
+}
+
/**
* Immediately following this command is a blob of data containing an embedded
* chunk of migration stream; read it and load it.
@@ -1892,6 +1924,9 @@ static int loadvm_process_command(QEMUFile *f)
case MIG_CMD_POSTCOPY_RAM_DISCARD:
return loadvm_postcopy_ram_handle_discard(mis, len);
+ case MIG_CMD_POSTCOPY_RESUME:
+ return loadvm_postcopy_handle_resume(mis);
+
case MIG_CMD_RECV_BITMAP:
return loadvm_handle_recv_bitmap(mis, len);
}
diff --git a/migration/savevm.h b/migration/savevm.h
index 8126b1cc14..a5f3879191 100644
--- a/migration/savevm.h
+++ b/migration/savevm.h
@@ -46,6 +46,7 @@ int qemu_savevm_send_packaged(QEMUFile *f, const uint8_t *buf, size_t len);
void qemu_savevm_send_postcopy_advise(QEMUFile *f);
void qemu_savevm_send_postcopy_listen(QEMUFile *f);
void qemu_savevm_send_postcopy_run(QEMUFile *f);
+void qemu_savevm_send_postcopy_resume(QEMUFile *f);
void qemu_savevm_send_recv_bitmap(QEMUFile *f, char *block_name);
void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
diff --git a/migration/trace-events b/migration/trace-events
index 3dcf8a93d9..4b60865194 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -18,6 +18,7 @@ loadvm_postcopy_handle_listen(void) ""
loadvm_postcopy_handle_run(void) ""
loadvm_postcopy_handle_run_cpu_sync(void) ""
loadvm_postcopy_handle_run_vmstart(void) ""
+loadvm_postcopy_handle_resume(void) ""
loadvm_postcopy_ram_handle_discard(void) ""
loadvm_postcopy_ram_handle_discard_end(void) ""
loadvm_postcopy_ram_handle_discard_header(const char *ramid, uint16_t len) "%s: %ud"
@@ -35,6 +36,7 @@ savevm_send_open_return_path(void) ""
savevm_send_ping(uint32_t val) "0x%x"
savevm_send_postcopy_listen(void) ""
savevm_send_postcopy_run(void) ""
+savevm_send_postcopy_resume(void) ""
savevm_send_recv_bitmap(char *name) "%s"
savevm_state_setup(void) ""
savevm_state_header(void) ""
--
2.13.5
next prev parent reply other threads:[~2017-10-16 6:53 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-16 6:51 [Qemu-devel] [PATCH v3 00/32] Migration: postcopy failure recovery Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 01/32] migration: better error handling with QEMUFile Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 02/32] migration: reuse mis->userfault_quit_fd Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 03/32] migration: provide postcopy_fault_thread_notify() Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 04/32] migration: new postcopy-pause state Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 05/32] migration: implement "postcopy-pause" src logic Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 06/32] migration: allow dst vm pause on postcopy Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 07/32] migration: allow src return path to pause Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 08/32] migration: allow send_rq to fail Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 09/32] migration: allow fault thread to pause Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 10/32] qmp: hmp: add migrate "resume" option Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 11/32] migration: pass MigrationState to migrate_init() Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 12/32] migration: rebuild channel on source Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 13/32] migration: new state "postcopy-recover" Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 14/32] migration: wakeup dst ram-load-thread for recover Peter Xu
2017-10-16 6:51 ` [Qemu-devel] [PATCH v3 15/32] migration: new cmd MIG_CMD_RECV_BITMAP Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 16/32] migration: new message MIG_RP_MSG_RECV_BITMAP Peter Xu
2017-10-16 6:52 ` Peter Xu [this message]
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 18/32] migration: new message MIG_RP_MSG_RESUME_ACK Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 19/32] migration: introduce SaveVMHandlers.resume_prepare Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 20/32] migration: synchronize dirty bitmap for resume Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 21/32] migration: setup ramstate " Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 22/32] migration: final handshake for the resume Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 23/32] migration: free SocketAddress where allocated Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 24/32] migration: return incoming task tag for sockets Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 25/32] migration: return incoming task tag for exec Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 26/32] migration: return incoming task tag for fd Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 27/32] migration: store listen task tag Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 28/32] migration: allow migrate_incoming for paused VM Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 29/32] migration: init dst in migration_object_init too Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 30/32] migration: delay the postcopy-active state switch Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 31/32] migration, qmp: new command "migrate-pause" Peter Xu
2017-10-16 7:06 ` Peter Xu
2017-10-16 6:52 ` [Qemu-devel] [PATCH v3 32/32] migration, hmp: new command "migrate_pause" Peter Xu
2017-10-16 7:32 ` [Qemu-devel] [PATCH v3 00/32] Migration: postcopy failure recovery no-reply
2017-10-16 9:41 ` Peter Xu
2017-10-30 9:29 ` Juan Quintela
2017-10-16 8:05 ` no-reply
2017-10-16 9:43 ` Peter Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171016065216.18162-18-peterx@redhat.com \
--to=peterx@redhat.com \
--cc=a.perevalov@samsung.com \
--cc=aarcange@redhat.com \
--cc=berrange@redhat.com \
--cc=dgilbert@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).