qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Daniel P. Berrange" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	"Daniel P. Berrange" <berrange@redhat.com>
Subject: [Qemu-devel] [PULL v1 08/11] io: get rid of bounce buffering in websock write path
Date: Mon, 16 Oct 2017 21:16:47 +0100	[thread overview]
Message-ID: <20171016201650.18399-9-berrange@redhat.com> (raw)
In-Reply-To: <20171016201650.18399-1-berrange@redhat.com>

Currently most outbound I/O on the websock channel gets copied into the
rawoutput buffer, and then immediately copied again into the encoutput
buffer, with a header prepended. Now that qio_channel_websock_encode
accepts a struct iovec, we can trivially remove this bounce buffering
and write directly to encoutput.

In doing so, we also now correctly validate the encoutput size against
the QIO_CHANNEL_WEBSOCK_MAX_BUFFER limit.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
 include/io/channel-websock.h |  1 -
 io/channel-websock.c         | 64 +++++++++++++++++++-------------------------
 2 files changed, 28 insertions(+), 37 deletions(-)

diff --git a/include/io/channel-websock.h b/include/io/channel-websock.h
index 3762707b9c..a7e5e92e61 100644
--- a/include/io/channel-websock.h
+++ b/include/io/channel-websock.h
@@ -59,7 +59,6 @@ struct QIOChannelWebsock {
     Buffer encinput;
     Buffer encoutput;
     Buffer rawinput;
-    Buffer rawoutput;
     size_t payload_remain;
     size_t pong_remain;
     QIOChannelWebsockMask mask;
diff --git a/io/channel-websock.c b/io/channel-websock.c
index 93c06f5b94..e82b1beab3 100644
--- a/io/channel-websock.c
+++ b/io/channel-websock.c
@@ -24,6 +24,7 @@
 #include "io/channel-websock.h"
 #include "crypto/hash.h"
 #include "trace.h"
+#include "qemu/iov.h"
 
 #include <time.h>
 
@@ -633,19 +634,22 @@ static ssize_t qio_channel_websock_write_wire(QIOChannelWebsock *, Error **);
 static void qio_channel_websock_write_close(QIOChannelWebsock *ioc,
                                             uint16_t code, const char *reason)
 {
-    struct iovec iov;
-    buffer_reserve(&ioc->rawoutput, 2 + (reason ? strlen(reason) : 0));
-    *(uint16_t *)(ioc->rawoutput.buffer + ioc->rawoutput.offset) =
-        cpu_to_be16(code);
-    ioc->rawoutput.offset += 2;
+    struct iovec iov[2] = {
+        { .iov_base = &code, .iov_len = sizeof(code) },
+    };
+    size_t niov = 1;
+    size_t size = iov[0].iov_len;
+
+    cpu_to_be16s(&code);
+
     if (reason) {
-        buffer_append(&ioc->rawoutput, reason, strlen(reason));
+        iov[1].iov_base = (void *)reason;
+        iov[1].iov_len = strlen(reason);
+        size += iov[1].iov_len;
+        niov++;
     }
-    iov.iov_base = ioc->rawoutput.buffer;
-    iov.iov_len = ioc->rawoutput.offset;
     qio_channel_websock_encode(ioc, QIO_CHANNEL_WEBSOCK_OPCODE_CLOSE,
-                               &iov, 1, iov.iov_len);
-    buffer_reset(&ioc->rawoutput);
+                               iov, niov, size);
     qio_channel_websock_write_wire(ioc, NULL);
     qio_channel_shutdown(ioc->master, QIO_CHANNEL_SHUTDOWN_BOTH, NULL);
 }
@@ -893,7 +897,6 @@ static void qio_channel_websock_finalize(Object *obj)
     buffer_free(&ioc->encinput);
     buffer_free(&ioc->encoutput);
     buffer_free(&ioc->rawinput);
-    buffer_free(&ioc->rawoutput);
     object_unref(OBJECT(ioc->master));
     if (ioc->io_tag) {
         g_source_remove(ioc->io_tag);
@@ -1103,8 +1106,8 @@ static ssize_t qio_channel_websock_writev(QIOChannel *ioc,
                                           Error **errp)
 {
     QIOChannelWebsock *wioc = QIO_CHANNEL_WEBSOCK(ioc);
-    size_t i;
-    ssize_t done = 0;
+    ssize_t want = iov_size(iov, niov);
+    ssize_t avail;
     ssize_t ret;
 
     if (wioc->io_err) {
@@ -1117,32 +1120,21 @@ static ssize_t qio_channel_websock_writev(QIOChannel *ioc,
         return -1;
     }
 
-    for (i = 0; i < niov; i++) {
-        size_t want = iov[i].iov_len;
-        if ((want + wioc->rawoutput.offset) > QIO_CHANNEL_WEBSOCK_MAX_BUFFER) {
-            want = (QIO_CHANNEL_WEBSOCK_MAX_BUFFER - wioc->rawoutput.offset);
-        }
-        if (want == 0) {
-            goto done;
-        }
-
-        buffer_reserve(&wioc->rawoutput, want);
-        buffer_append(&wioc->rawoutput, iov[i].iov_base, want);
-        done += want;
-        if (want < iov[i].iov_len) {
-            break;
-        }
+    avail = wioc->encoutput.offset >= QIO_CHANNEL_WEBSOCK_MAX_BUFFER ?
+        0 : (QIO_CHANNEL_WEBSOCK_MAX_BUFFER - wioc->encoutput.offset);
+    if (want > avail) {
+        want = avail;
     }
 
- done:
-    if (wioc->rawoutput.offset) {
-        struct iovec iov = { .iov_base = wioc->rawoutput.buffer,
-                             .iov_len = wioc->rawoutput.offset };
+    if (want) {
         qio_channel_websock_encode(wioc,
                                    QIO_CHANNEL_WEBSOCK_OPCODE_BINARY_FRAME,
-                                   &iov, 1, iov.iov_len);
-        buffer_reset(&wioc->rawoutput);
+                                   iov, niov, want);
     }
+
+    /* Even if want == 0, we'll try write_wire in case there's
+     * pending data we could usefully flush out
+     */
     ret = qio_channel_websock_write_wire(wioc, errp);
     if (ret < 0 &&
         ret != QIO_CHANNEL_ERR_BLOCK) {
@@ -1152,11 +1144,11 @@ static ssize_t qio_channel_websock_writev(QIOChannel *ioc,
 
     qio_channel_websock_set_watch(wioc);
 
-    if (done == 0) {
+    if (want == 0) {
         return QIO_CHANNEL_ERR_BLOCK;
     }
 
-    return done;
+    return want;
 }
 
 static int qio_channel_websock_set_blocking(QIOChannel *ioc,
-- 
2.13.5

  parent reply	other threads:[~2017-10-16 20:17 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-16 20:16 [Qemu-devel] [PULL v1 00/11] Merge QIO 2017-10-16 Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 01/11] sockets: factor out a new try_bind() function Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 02/11] sockets: factor out create_fast_reuse_socket Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 03/11] sockets: Handle race condition between binds to the same port Daniel P. Berrange
2017-11-03 18:54   ` Peter Maydell
2017-11-06 10:40     ` Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 04/11] io: monitor encoutput buffer size from websocket GSource Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 05/11] io: simplify websocket ping reply handling Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 06/11] io: get rid of qio_channel_websock_encode helper method Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 07/11] io: pass a struct iovec into qio_channel_websock_encode Daniel P. Berrange
2017-10-16 20:16 ` Daniel P. Berrange [this message]
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 09/11] io: cope with websock 'Connection' header having multiple values Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 10/11] io: add trace points for websocket HTTP protocol headers Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 11/11] io: fix mem leak in websock error path Daniel P. Berrange
2017-10-17 12:12 ` [Qemu-devel] [PULL v1 00/11] Merge QIO 2017-10-16 Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171016201650.18399-9-berrange@redhat.com \
    --to=berrange@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).