From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, Richard Henderson <rth@twiddle.net>
Subject: [Qemu-devel] [PULL 10/51] tcg: Avoid loops against variable bounds
Date: Wed, 25 Oct 2017 11:34:54 +0200 [thread overview]
Message-ID: <20171025093535.10175-11-richard.henderson@linaro.org> (raw)
In-Reply-To: <20171025093535.10175-1-richard.henderson@linaro.org>
From: Richard Henderson <rth@twiddle.net>
Copy s->nb_globals or s->nb_temps to a local variable for the purposes
of iteration. This should allow the compiler to use low-overhead
looping constructs on some hosts.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
---
tcg/tcg.c | 27 ++++++++++-----------------
1 file changed, 10 insertions(+), 17 deletions(-)
diff --git a/tcg/tcg.c b/tcg/tcg.c
index d08e34a9d8..840e65c0d4 100644
--- a/tcg/tcg.c
+++ b/tcg/tcg.c
@@ -1159,23 +1159,16 @@ void tcg_gen_callN(TCGContext *s, void *func, TCGArg ret,
static void tcg_reg_alloc_start(TCGContext *s)
{
- int i;
+ int i, n;
TCGTemp *ts;
- for(i = 0; i < s->nb_globals; i++) {
+
+ for (i = 0, n = s->nb_globals; i < n; i++) {
ts = &s->temps[i];
- if (ts->fixed_reg) {
- ts->val_type = TEMP_VAL_REG;
- } else {
- ts->val_type = TEMP_VAL_MEM;
- }
+ ts->val_type = (ts->fixed_reg ? TEMP_VAL_REG : TEMP_VAL_MEM);
}
- for(i = s->nb_globals; i < s->nb_temps; i++) {
+ for (n = s->nb_temps; i < n; i++) {
ts = &s->temps[i];
- if (ts->temp_local) {
- ts->val_type = TEMP_VAL_MEM;
- } else {
- ts->val_type = TEMP_VAL_DEAD;
- }
+ ts->val_type = (ts->temp_local ? TEMP_VAL_MEM : TEMP_VAL_DEAD);
ts->mem_allocated = 0;
ts->fixed_reg = 0;
}
@@ -2277,9 +2270,9 @@ static void temp_save(TCGContext *s, TCGTemp *ts, TCGRegSet allocated_regs)
temporary registers needs to be allocated to store a constant. */
static void save_globals(TCGContext *s, TCGRegSet allocated_regs)
{
- int i;
+ int i, n;
- for (i = 0; i < s->nb_globals; i++) {
+ for (i = 0, n = s->nb_globals; i < n; i++) {
temp_save(s, &s->temps[i], allocated_regs);
}
}
@@ -2289,9 +2282,9 @@ static void save_globals(TCGContext *s, TCGRegSet allocated_regs)
temporary registers needs to be allocated to store a constant. */
static void sync_globals(TCGContext *s, TCGRegSet allocated_regs)
{
- int i;
+ int i, n;
- for (i = 0; i < s->nb_globals; i++) {
+ for (i = 0, n = s->nb_globals; i < n; i++) {
TCGTemp *ts = &s->temps[i];
tcg_debug_assert(ts->val_type != TEMP_VAL_REG
|| ts->fixed_reg
--
2.13.6
next prev parent reply other threads:[~2017-10-25 9:35 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-25 9:34 [Qemu-devel] [PULL 00/51] tcg queued patches Richard Henderson
2017-10-25 9:34 ` [Qemu-devel] [PULL 01/51] tcg: Merge opcode arguments into TCGOp Richard Henderson
2017-10-25 9:34 ` [Qemu-devel] [PULL 02/51] tcg: Propagate args to op->args in optimizer Richard Henderson
2017-10-25 9:34 ` [Qemu-devel] [PULL 03/51] tcg: Propagate args to op->args in tcg.c Richard Henderson
2017-10-25 9:34 ` [Qemu-devel] [PULL 04/51] tcg: Propagate TCGOp down to allocators Richard Henderson
2017-10-25 9:34 ` [Qemu-devel] [PULL 05/51] tcg: Introduce arg_temp Richard Henderson
2017-10-25 9:34 ` [Qemu-devel] [PULL 06/51] tcg: Add temp_global bit to TCGTemp Richard Henderson
2017-10-25 9:34 ` [Qemu-devel] [PULL 07/51] tcg: Return NULL temp for TCG_CALL_DUMMY_ARG Richard Henderson
2017-10-25 9:34 ` [Qemu-devel] [PULL 08/51] tcg: Introduce temp_arg, export temp_idx Richard Henderson
2017-10-25 9:34 ` [Qemu-devel] [PULL 09/51] tcg: Use per-temp state data in liveness Richard Henderson
2017-10-25 9:34 ` Richard Henderson [this message]
2017-10-25 9:34 ` [Qemu-devel] [PULL 11/51] tcg: Change temp_allocate_frame arg to TCGTemp Richard Henderson
2017-10-25 9:34 ` [Qemu-devel] [PULL 12/51] tcg: Remove unused TCG_CALL_DUMMY_TCGV Richard Henderson
2017-10-25 9:34 ` [Qemu-devel] [PULL 13/51] tcg: Use per-temp state data in optimize Richard Henderson
2017-10-25 9:34 ` [Qemu-devel] [PULL 14/51] tcg: Push tcg_ctx into generator functions Richard Henderson
2017-10-25 9:34 ` [Qemu-devel] [PULL 15/51] tcg: Push tcg_ctx into tcg_gen_callN Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 16/51] tcg: Introduce tcgv_{i32, i64, ptr}_{arg, temp} Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 17/51] tcg: Introduce temp_tcgv_{i32,i64,ptr} Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 18/51] tcg: Remove GET_TCGV_* and MAKE_TCGV_* Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 19/51] tcg: Remove TCGV_EQUAL* Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 20/51] qom: Introduce CPUClass.tcg_initialize Richard Henderson
2017-10-26 12:45 ` Eduardo Habkost
2017-10-25 9:35 ` [Qemu-devel] [PULL 21/51] tcg: Use offsets not indices for TCGv_* Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 22/51] tcg: define CF_PARALLEL and use it for TB hashing along with CF_COUNT_MASK Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 23/51] tcg: Add CPUState cflags_next_tb Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 24/51] tcg: Include CF_COUNT_MASK in CF_HASH_MASK Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 25/51] tcg: convert tb->cflags reads to tb_cflags(tb) Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 26/51] target/arm: check CF_PARALLEL instead of parallel_cpus Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 27/51] target/hppa: " Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 28/51] target/i386: " Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 29/51] target/m68k: " Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 30/51] target/s390x: " Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 31/51] target/sh4: " Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 32/51] target/sparc: " Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 33/51] tcg: " Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 34/51] cpu-exec: lookup/generate TB outside exclusive region during step_atomic Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 35/51] tcg: Add CF_LAST_IO + CF_USE_ICOUNT to CF_HASH_MASK Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 36/51] tcg: Remove CF_IGNORE_ICOUNT Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 37/51] translate-all: use a binary search tree to track TBs in TBContext Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 38/51] exec-all: rename tb_free to tb_remove Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 39/51] translate-all: report correct avg host TB size Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 40/51] tcg: take tb_ctx out of TCGContext Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 41/51] tcg: define tcg_init_ctx and make tcg_ctx a pointer Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 42/51] gen-icount: fold exitreq_label into TCGContext Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 43/51] tcg: introduce **tcg_ctxs to keep track of all TCGContext's Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 44/51] tcg: distribute profiling counters across TCGContext's Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 45/51] tcg: allocate optimizer temps with tcg_malloc Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 46/51] osdep: introduce qemu_mprotect_rwx/none Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 47/51] translate-all: use qemu_protect_rwx/none helpers Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 48/51] tcg: introduce regions to split code_gen_buffer Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 49/51] tcg: enable multiple TCG contexts in softmmu Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 50/51] tcg: Initialize cpu_env generically Richard Henderson
2017-10-25 9:35 ` [Qemu-devel] [PULL 51/51] translate-all: exit from tb_phys_invalidate if qht_remove fails Richard Henderson
2017-10-25 10:33 ` [Qemu-devel] [PULL 00/51] tcg queued patches no-reply
2017-10-25 19:03 ` Peter Maydell
2017-11-01 17:34 ` Thomas Huth
2017-11-01 20:36 ` Emilio G. Cota
2017-11-02 13:38 ` Peter Maydell
2017-11-02 19:53 ` Emilio G. Cota
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171025093535.10175-11-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).