From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 11/35] block: Switch BdrvCoGetBlockStatusData to byte-based
Date: Thu, 26 Oct 2017 15:17:17 +0200 [thread overview]
Message-ID: <20171026131741.5059-12-kwolf@redhat.com> (raw)
In-Reply-To: <20171026131741.5059-1-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
type (no semantic change), and rename it to match the corresponding
public function rename.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/io.c | 56 ++++++++++++++++++++++++++++++++++++++------------------
1 file changed, 38 insertions(+), 18 deletions(-)
diff --git a/block/io.c b/block/io.c
index 1c4dc4b1a1..71d5f18d04 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1765,17 +1765,18 @@ int bdrv_flush_all(void)
}
-typedef struct BdrvCoGetBlockStatusData {
+typedef struct BdrvCoBlockStatusData {
BlockDriverState *bs;
BlockDriverState *base;
bool want_zero;
- int64_t sector_num;
- int nb_sectors;
- int *pnum;
+ int64_t offset;
+ int64_t bytes;
+ int64_t *pnum;
+ int64_t *map;
BlockDriverState **file;
- int64_t ret;
+ int ret;
bool done;
-} BdrvCoGetBlockStatusData;
+} BdrvCoBlockStatusData;
int64_t coroutine_fn bdrv_co_get_block_status_from_file(BlockDriverState *bs,
int64_t sector_num,
@@ -2025,14 +2026,24 @@ static int64_t coroutine_fn bdrv_co_get_block_status_above(BlockDriverState *bs,
/* Coroutine wrapper for bdrv_get_block_status_above() */
static void coroutine_fn bdrv_get_block_status_above_co_entry(void *opaque)
{
- BdrvCoGetBlockStatusData *data = opaque;
+ BdrvCoBlockStatusData *data = opaque;
+ int n = 0;
+ int64_t ret;
- data->ret = bdrv_co_get_block_status_above(data->bs, data->base,
- data->want_zero,
- data->sector_num,
- data->nb_sectors,
- data->pnum,
- data->file);
+ ret = bdrv_co_get_block_status_above(data->bs, data->base,
+ data->want_zero,
+ data->offset >> BDRV_SECTOR_BITS,
+ data->bytes >> BDRV_SECTOR_BITS,
+ &n,
+ data->file);
+ if (ret < 0) {
+ assert(INT_MIN <= ret);
+ data->ret = ret;
+ } else {
+ *data->pnum = n * BDRV_SECTOR_SIZE;
+ *data->map = ret & BDRV_BLOCK_OFFSET_MASK;
+ data->ret = ret & ~BDRV_BLOCK_OFFSET_MASK;
+ }
data->done = true;
}
@@ -2049,13 +2060,16 @@ static int64_t bdrv_common_block_status_above(BlockDriverState *bs,
BlockDriverState **file)
{
Coroutine *co;
- BdrvCoGetBlockStatusData data = {
+ int64_t n;
+ int64_t map;
+ BdrvCoBlockStatusData data = {
.bs = bs,
.base = base,
.want_zero = want_zero,
- .sector_num = sector_num,
- .nb_sectors = nb_sectors,
- .pnum = pnum,
+ .offset = sector_num * BDRV_SECTOR_SIZE,
+ .bytes = nb_sectors * BDRV_SECTOR_SIZE,
+ .pnum = &n,
+ .map = &map,
.file = file,
.done = false,
};
@@ -2069,7 +2083,13 @@ static int64_t bdrv_common_block_status_above(BlockDriverState *bs,
bdrv_coroutine_enter(bs, co);
BDRV_POLL_WHILE(bs, !data.done);
}
- return data.ret;
+ if (data.ret < 0) {
+ *pnum = 0;
+ return data.ret;
+ }
+ assert(QEMU_IS_ALIGNED(n | map, BDRV_SECTOR_SIZE));
+ *pnum = n >> BDRV_SECTOR_BITS;
+ return data.ret | map;
}
int64_t bdrv_get_block_status_above(BlockDriverState *bs,
--
2.13.6
next prev parent reply other threads:[~2017-10-26 13:18 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-26 13:17 [Qemu-devel] [PULL 00/35] Block layer patches Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 01/35] block: don't add 'driver' to options when referring to backing via node name Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 02/35] qemu-iotests: Test backing_fmt with backing node reference Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 03/35] block: Allow NULL file for bdrv_get_block_status() Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 04/35] block: Add flag to avoid wasted work in bdrv_is_allocated() Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 05/35] block: Make bdrv_round_to_clusters() signature more useful Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 06/35] qcow2: Switch is_zero_sectors() to byte-based Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 07/35] block: Switch bdrv_make_zero() " Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 08/35] qemu-img: Switch get_block_status() " Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 09/35] block: Convert bdrv_get_block_status() to bytes Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 10/35] block: Switch bdrv_co_get_block_status() to byte-based Kevin Wolf
2017-10-26 13:17 ` Kevin Wolf [this message]
2017-10-26 13:17 ` [Qemu-devel] [PULL 12/35] block: Switch bdrv_common_block_status_above() " Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 13/35] block: Switch bdrv_co_get_block_status_above() " Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 14/35] block: Convert bdrv_get_block_status_above() to bytes Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 15/35] qemu-img: Simplify logic in img_compare() Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 16/35] qemu-img: Speed up compare on pre-allocated larger file Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 17/35] qemu-img: Add find_nonzero() Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 18/35] qemu-img: Drop redundant error message in compare Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 19/35] qemu-img: Change check_empty_sectors() to byte-based Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 20/35] qemu-img: Change compare_sectors() to be byte-based Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 21/35] qemu-img: Change img_rebase() " Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 22/35] qemu-img: Change img_compare() " Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 23/35] block: Align block status requests Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 24/35] block: Reduce bdrv_aligned_preadv() rounding Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 25/35] qcow2: Reduce is_zero() rounding Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 26/35] qemu-io: Relax 'alloc' now that block-status doesn't assert Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 27/35] qemu-img.1: Image invalidation on qemu-img commit Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 28/35] qcow2: Use BDRV_SECTOR_BITS instead of its literal value Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 29/35] iotests: Add test for dataplane mirroring Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 30/35] iotests: Pull _filter_actual_image_size from 67/87 Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 31/35] iotests: Filter actual image size in 184 and 191 Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 32/35] qcow2: Emit errp when truncating the image tail Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 33/35] qcow2: Fix unaligned preallocated truncation Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 34/35] qcow2: Always execute preallocate() in a coroutine Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 35/35] iotests: Add cluster_size=64k to 125 Kevin Wolf
2017-10-27 10:13 ` [Qemu-devel] [PULL 00/35] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171026131741.5059-12-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).