qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
To: qemu-block@nongnu.org, qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, armbru@redhat.com, eblake@redhat.com,
	famz@redhat.com, stefanha@redhat.com, amit.shah@redhat.com,
	quintela@redhat.com, mreitz@redhat.com, kwolf@redhat.com,
	peter.maydell@linaro.org, dgilbert@redhat.com, den@openvz.org,
	jsnow@redhat.com, vsementsov@virtuozzo.com, lirans@il.ibm.com
Subject: [Qemu-devel] [PATCH v8 05/14] migration: introduce postcopy-only pending
Date: Mon, 30 Oct 2017 19:33:00 +0300	[thread overview]
Message-ID: <20171030163309.75770-6-vsementsov@virtuozzo.com> (raw)
In-Reply-To: <20171030163309.75770-1-vsementsov@virtuozzo.com>

There would be savevm states (dirty-bitmap) which can migrate only in
postcopy stage. The corresponding pending is introduced here.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
---
 include/migration/register.h | 17 +++++++++++++++--
 migration/savevm.h           |  5 +++--
 migration/block.c            |  7 ++++---
 migration/migration.c        | 15 ++++++++-------
 migration/ram.c              |  9 +++++----
 migration/savevm.c           | 13 ++++++++-----
 migration/trace-events       |  2 +-
 7 files changed, 44 insertions(+), 24 deletions(-)

diff --git a/include/migration/register.h b/include/migration/register.h
index f4f7bdc177..9436a87678 100644
--- a/include/migration/register.h
+++ b/include/migration/register.h
@@ -37,8 +37,21 @@ typedef struct SaveVMHandlers {
     int (*save_setup)(QEMUFile *f, void *opaque);
     void (*save_live_pending)(QEMUFile *f, void *opaque,
                               uint64_t threshold_size,
-                              uint64_t *non_postcopiable_pending,
-                              uint64_t *postcopiable_pending);
+                              uint64_t *res_precopy_only,
+                              uint64_t *res_compatible,
+                              uint64_t *res_postcopy_only);
+    /* Note for save_live_pending:
+     * - res_precopy_only is for data which must be migrated in precopy phase
+     *     or in stopped state, in other words - before target vm start
+     * - res_compatible is for data which may be migrated in any phase
+     * - res_postcopy_only is for data which must be migrated in postcopy phase
+     *     or in stopped state, in other words - after source vm stop
+     *
+     * Sum of res_postcopy_only, res_compatible and res_postcopy_only is the
+     * whole amount of pending data.
+     */
+
+
     LoadStateHandler *load_state;
     int (*load_setup)(QEMUFile *f, void *opaque);
     int (*load_cleanup)(void *opaque);
diff --git a/migration/savevm.h b/migration/savevm.h
index 295c4a1f2c..cf4f0d37ca 100644
--- a/migration/savevm.h
+++ b/migration/savevm.h
@@ -38,8 +38,9 @@ void qemu_savevm_state_complete_postcopy(QEMUFile *f);
 int qemu_savevm_state_complete_precopy(QEMUFile *f, bool iterable_only,
                                        bool inactivate_disks);
 void qemu_savevm_state_pending(QEMUFile *f, uint64_t max_size,
-                               uint64_t *res_non_postcopiable,
-                               uint64_t *res_postcopiable);
+                               uint64_t *res_precopy_only,
+                               uint64_t *res_compatible,
+                               uint64_t *res_postcopy_only);
 void qemu_savevm_send_ping(QEMUFile *f, uint32_t value);
 void qemu_savevm_send_open_return_path(QEMUFile *f);
 int qemu_savevm_send_packaged(QEMUFile *f, const uint8_t *buf, size_t len);
diff --git a/migration/block.c b/migration/block.c
index 3282809583..39dfa567e8 100644
--- a/migration/block.c
+++ b/migration/block.c
@@ -865,8 +865,9 @@ static int block_save_complete(QEMUFile *f, void *opaque)
 }
 
 static void block_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
-                               uint64_t *non_postcopiable_pending,
-                               uint64_t *postcopiable_pending)
+                               uint64_t *res_precopy_only,
+                               uint64_t *res_compatible,
+                               uint64_t *res_postcopy_only)
 {
     /* Estimate pending number of bytes to send */
     uint64_t pending;
@@ -887,7 +888,7 @@ static void block_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
 
     DPRINTF("Enter save live pending  %" PRIu64 "\n", pending);
     /* We don't do postcopy */
-    *non_postcopiable_pending += pending;
+    *res_precopy_only += pending;
 }
 
 static int block_load(QEMUFile *f, void *opaque, int version_id)
diff --git a/migration/migration.c b/migration/migration.c
index 4de3b551fe..e6c9be3cca 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -2216,20 +2216,21 @@ static void *migration_thread(void *opaque)
         uint64_t pending_size;
 
         if (!qemu_file_rate_limit(s->to_dst_file)) {
-            uint64_t pend_post, pend_nonpost;
+            uint64_t pend_pre, pend_compat, pend_post;
 
-            qemu_savevm_state_pending(s->to_dst_file, threshold_size,
-                                      &pend_nonpost, &pend_post);
-            pending_size = pend_nonpost + pend_post;
+            qemu_savevm_state_pending(s->to_dst_file, threshold_size, &pend_pre,
+                                      &pend_compat, &pend_post);
+            pending_size = pend_pre + pend_compat + pend_post;
             trace_migrate_pending(pending_size, threshold_size,
-                                  pend_post, pend_nonpost);
+                                  pend_pre, pend_compat, pend_post);
             if (pending_size && pending_size >= threshold_size) {
                 /* Still a significant amount to transfer */
 
                 if (migrate_postcopy() &&
                     s->state != MIGRATION_STATUS_POSTCOPY_ACTIVE &&
-                    pend_nonpost <= threshold_size &&
-                    atomic_read(&s->start_postcopy)) {
+                    pend_pre <= threshold_size &&
+                    (atomic_read(&s->start_postcopy) ||
+                     (pend_pre + pend_compat <= threshold_size))) {
 
                     if (!postcopy_start(s, &old_vm_running)) {
                         current_active_state = MIGRATION_STATUS_POSTCOPY_ACTIVE;
diff --git a/migration/ram.c b/migration/ram.c
index 8620aa400a..1b664a2d9a 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -2358,8 +2358,9 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
 }
 
 static void ram_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
-                             uint64_t *non_postcopiable_pending,
-                             uint64_t *postcopiable_pending)
+                             uint64_t *res_precopy_only,
+                             uint64_t *res_compatible,
+                             uint64_t *res_postcopy_only)
 {
     RAMState **temp = opaque;
     RAMState *rs = *temp;
@@ -2379,9 +2380,9 @@ static void ram_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
 
     if (migrate_postcopy_ram()) {
         /* We can do postcopy, and all the data is postcopiable */
-        *postcopiable_pending += remaining_size;
+        *res_compatible += remaining_size;
     } else {
-        *non_postcopiable_pending += remaining_size;
+        *res_precopy_only += remaining_size;
     }
 }
 
diff --git a/migration/savevm.c b/migration/savevm.c
index 4a88228614..f6b62cb202 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1218,13 +1218,15 @@ int qemu_savevm_state_complete_precopy(QEMUFile *f, bool iterable_only,
  * for units that can't do postcopy.
  */
 void qemu_savevm_state_pending(QEMUFile *f, uint64_t threshold_size,
-                               uint64_t *res_non_postcopiable,
-                               uint64_t *res_postcopiable)
+                               uint64_t *res_precopy_only,
+                               uint64_t *res_compatible,
+                               uint64_t *res_postcopy_only)
 {
     SaveStateEntry *se;
 
-    *res_non_postcopiable = 0;
-    *res_postcopiable = 0;
+    *res_precopy_only = 0;
+    *res_compatible = 0;
+    *res_postcopy_only = 0;
 
 
     QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
@@ -1237,7 +1239,8 @@ void qemu_savevm_state_pending(QEMUFile *f, uint64_t threshold_size,
             }
         }
         se->ops->save_live_pending(f, se->opaque, threshold_size,
-                                   res_non_postcopiable, res_postcopiable);
+                                   res_precopy_only, res_compatible,
+                                   res_postcopy_only);
     }
 }
 
diff --git a/migration/trace-events b/migration/trace-events
index 6f29fcc686..a04fffb877 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -86,7 +86,7 @@ migrate_fd_cleanup(void) ""
 migrate_fd_error(const char *error_desc) "error=%s"
 migrate_fd_cancel(void) ""
 migrate_handle_rp_req_pages(const char *rbname, size_t start, size_t len) "in %s at 0x%zx len 0x%zx"
-migrate_pending(uint64_t size, uint64_t max, uint64_t post, uint64_t nonpost) "pending size %" PRIu64 " max %" PRIu64 " (post=%" PRIu64 " nonpost=%" PRIu64 ")"
+migrate_pending(uint64_t size, uint64_t max, uint64_t pre, uint64_t compat, uint64_t post) "pending size %" PRIu64 " max %" PRIu64 " (pre = %" PRIu64 " compat=%" PRIu64 " post=%" PRIu64 ")"
 migrate_send_rp_message(int msg_type, uint16_t len) "%d: len %d"
 migration_completion_file_err(void) ""
 migration_completion_postcopy_end(void) ""
-- 
2.11.1

  parent reply	other threads:[~2017-10-30 16:33 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-30 16:32 [Qemu-devel] [PATCH v8 00/14] Dirty bitmaps postcopy migration Vladimir Sementsov-Ogievskiy
2017-10-30 16:32 ` [Qemu-devel] [PATCH v8 01/14] block/dirty-bitmap: add bdrv_dirty_bitmap_enable_successor() Vladimir Sementsov-Ogievskiy
2017-11-10  0:47   ` John Snow
2017-10-30 16:32 ` [Qemu-devel] [PATCH v8 02/14] block/dirty-bitmap: add locked version of bdrv_release_dirty_bitmap Vladimir Sementsov-Ogievskiy
2017-11-10 22:52   ` John Snow
2017-11-16  8:56     ` Vladimir Sementsov-Ogievskiy
2017-11-16 18:18       ` John Snow
2017-11-17  8:07     ` Vladimir Sementsov-Ogievskiy
2017-11-17 18:25       ` John Snow
2017-11-20  9:30         ` Vladimir Sementsov-Ogievskiy
2017-10-30 16:32 ` [Qemu-devel] [PATCH v8 03/14] block/dirty-bitmap: add bdrv_dirty_bitmap_release_successor Vladimir Sementsov-Ogievskiy
2017-11-13 22:17   ` John Snow
2017-10-30 16:32 ` [Qemu-devel] [PATCH v8 04/14] block/dirty-bitmap: add bdrv_dirty_bitmap_set_frozen Vladimir Sementsov-Ogievskiy
2017-11-13 23:32   ` John Snow
2017-11-17 14:46     ` Vladimir Sementsov-Ogievskiy
2017-11-17 17:20       ` John Snow
2017-11-17 17:30         ` Vladimir Sementsov-Ogievskiy
2017-11-17 23:46           ` John Snow
2017-11-20  9:40             ` Vladimir Sementsov-Ogievskiy
2017-10-30 16:33 ` Vladimir Sementsov-Ogievskiy [this message]
2017-10-30 17:31   ` [Qemu-devel] [PATCH v8 05/14] migration: introduce postcopy-only pending Dr. David Alan Gilbert
2017-10-30 18:17     ` Vladimir Sementsov-Ogievskiy
2017-10-30 18:19   ` [Qemu-devel] [PATCH v8.1 " Vladimir Sementsov-Ogievskiy
2017-11-14  0:09     ` John Snow
2017-10-30 16:33 ` [Qemu-devel] [PATCH v8 06/14] qapi: add dirty-bitmaps migration capability Vladimir Sementsov-Ogievskiy
2017-10-30 16:33 ` [Qemu-devel] [PATCH v8 07/14] migration: include migrate_dirty_bitmaps in migrate_postcopy Vladimir Sementsov-Ogievskiy
2017-11-14  0:19   ` John Snow
2017-10-30 16:33 ` [Qemu-devel] [PATCH v8 08/14] migration/qemu-file: add qemu_put_counted_string() Vladimir Sementsov-Ogievskiy
2017-10-30 16:33 ` [Qemu-devel] [PATCH v8 09/14] migration: add is_active_iterate handler Vladimir Sementsov-Ogievskiy
2017-11-14  0:29   ` John Snow
2017-10-30 16:33 ` [Qemu-devel] [PATCH v8 10/14] migration: add postcopy migration of dirty bitmaps Vladimir Sementsov-Ogievskiy
2017-11-15  1:58   ` John Snow
2017-11-16 10:24     ` Vladimir Sementsov-Ogievskiy
2017-11-17  0:36       ` John Snow
2017-11-17  0:47       ` John Snow
2017-11-16 16:50     ` Dr. David Alan Gilbert
2017-11-17  1:27       ` John Snow
2017-10-30 16:33 ` [Qemu-devel] [PATCH v8 11/14] iotests: add default node-name Vladimir Sementsov-Ogievskiy
2017-10-30 16:33 ` [Qemu-devel] [PATCH v8 12/14] iotests: add dirty bitmap migration test Vladimir Sementsov-Ogievskiy
2017-10-30 16:33 ` [Qemu-devel] [PATCH v8 13/14] iotests: add dirty bitmap postcopy test Vladimir Sementsov-Ogievskiy
2017-10-30 16:33 ` [Qemu-devel] [PATCH v8 14/14] iotests: add persistent bitmap migration test Vladimir Sementsov-Ogievskiy
2017-10-30 16:54 ` [Qemu-devel] [PATCH v8 00/14] Dirty bitmaps postcopy migration no-reply
2017-10-30 16:55 ` no-reply
2017-10-30 18:22 ` Vladimir Sementsov-Ogievskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171030163309.75770-6-vsementsov@virtuozzo.com \
    --to=vsementsov@virtuozzo.com \
    --cc=amit.shah@redhat.com \
    --cc=armbru@redhat.com \
    --cc=den@openvz.org \
    --cc=dgilbert@redhat.com \
    --cc=eblake@redhat.com \
    --cc=famz@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=lirans@il.ibm.com \
    --cc=mreitz@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).