From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org, mst@redhat.com, pbonzini@redhat.com
Cc: peterx@redhat.com
Subject: [Qemu-devel] [PATCH] ioapic/tracing: Remove last DPRINTFs
Date: Thu, 2 Nov 2017 18:03:10 +0000 [thread overview]
Message-ID: <20171102180310.24760-1-dgilbert@redhat.com> (raw)
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Remove the last few DPRINTFs from hw/intc/ioapic.c and turn
them into tracing. In one case it's a new trace, in the others
it's just adding a parameter to the existing traces.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
hw/intc/ioapic.c | 17 +++--------------
hw/intc/trace-events | 5 +++--
2 files changed, 6 insertions(+), 16 deletions(-)
diff --git a/hw/intc/ioapic.c b/hw/intc/ioapic.c
index 37c4386ae3..36139a4db6 100644
--- a/hw/intc/ioapic.c
+++ b/hw/intc/ioapic.c
@@ -35,15 +35,6 @@
#include "hw/i386/x86-iommu.h"
#include "trace.h"
-//#define DEBUG_IOAPIC
-
-#ifdef DEBUG_IOAPIC
-#define DPRINTF(fmt, ...) \
- do { printf("ioapic: " fmt , ## __VA_ARGS__); } while (0)
-#else
-#define DPRINTF(fmt, ...)
-#endif
-
#define APIC_DELIVERY_MODE_SHIFT 8
#define APIC_POLARITY_SHIFT 14
#define APIC_TRIG_MODE_SHIFT 15
@@ -157,7 +148,7 @@ static void ioapic_set_irq(void *opaque, int vector, int level)
* to GSI 2. GSI maps to ioapic 1-1. This is not
* the cleanest way of doing it but it should work. */
- DPRINTF("%s: %s vec %x\n", __func__, level ? "raise" : "lower", vector);
+ trace_ioapic_set_irq(vector, level);
if (vector == 0) {
vector = 2;
}
@@ -290,11 +281,10 @@ ioapic_mem_read(void *opaque, hwaddr addr, unsigned int size)
}
}
}
- DPRINTF("read: %08x = %08x\n", s->ioregsel, val);
break;
}
- trace_ioapic_mem_read(addr, size, val);
+ trace_ioapic_mem_read(addr, s->ioregsel, size, val);
return val;
}
@@ -335,7 +325,7 @@ ioapic_mem_write(void *opaque, hwaddr addr, uint64_t val,
int index;
addr &= 0xff;
- trace_ioapic_mem_write(addr, size, val);
+ trace_ioapic_mem_write(addr, s->ioregsel, size, val);
switch (addr) {
case IOAPIC_IOREGSEL:
@@ -345,7 +335,6 @@ ioapic_mem_write(void *opaque, hwaddr addr, uint64_t val,
if (size != 4) {
break;
}
- DPRINTF("write: %08x = %08" PRIx64 "\n", s->ioregsel, val);
switch (s->ioregsel) {
case IOAPIC_REG_ID:
s->id = (val >> IOAPIC_ID_SHIFT) & IOAPIC_ID_MASK;
diff --git a/hw/intc/trace-events b/hw/intc/trace-events
index b86f242b0f..b298fac7c6 100644
--- a/hw/intc/trace-events
+++ b/hw/intc/trace-events
@@ -18,8 +18,9 @@ apic_mem_writel(uint64_t addr, uint32_t val) "0x%"PRIx64" = 0x%08x"
ioapic_set_remote_irr(int n) "set remote irr for pin %d"
ioapic_clear_remote_irr(int n, int vector) "clear remote irr for pin %d vector %d"
ioapic_eoi_broadcast(int vector) "EOI broadcast for vector %d"
-ioapic_mem_read(uint8_t addr, uint8_t size, uint32_t val) "ioapic mem read addr 0x%"PRIx8" size 0x%"PRIx8" retval 0x%"PRIx32
-ioapic_mem_write(uint8_t addr, uint8_t size, uint32_t val) "ioapic mem write addr 0x%"PRIx8" size 0x%"PRIx8" val 0x%"PRIx32
+ioapic_mem_read(uint8_t addr, uint8_t regsel, uint8_t size, uint32_t val) "ioapic mem read addr 0x%"PRIx8" regsel: 0x%"PRIx8" size 0x%"PRIx8" retval 0x%"PRIx32
+ioapic_mem_write(uint8_t addr, uint8_t regsel, uint8_t size, uint32_t val) "ioapic mem write addr 0x%"PRIx8" regsel: 0x%"PRIx8" size 0x%"PRIx8" val 0x%"PRIx32
+ioapic_set_irq(int vector, int level) "vector: %d level: %d"
# hw/intc/slavio_intctl.c
slavio_intctl_mem_readl(uint32_t cpu, uint64_t addr, uint32_t ret) "read cpu %d reg 0x%"PRIx64" = 0x%x"
--
2.14.3
next reply other threads:[~2017-11-02 18:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-02 18:03 Dr. David Alan Gilbert (git) [this message]
2017-11-03 6:41 ` [Qemu-devel] [PATCH] ioapic/tracing: Remove last DPRINTFs Peter Xu
2017-11-03 9:41 ` Stefan Hajnoczi
2017-11-08 13:56 ` Paolo Bonzini
2017-11-28 18:58 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171102180310.24760-1-dgilbert@redhat.com \
--to=dgilbert@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).