[Qemu-devel] [PATCH v8 10/13] xilinx_spips: Add support for 4 byte addresses in the LQSPI

[Francisco Iglesias <frasse.iglesias@gmail.com>]

Add support for 4 byte addresses in the LQSPI and correct LQSPI_CFG_SEP_BUS.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
---
 hw/ssi/xilinx_spips.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
index 878b17e..ab54da8 100644
--- a/hw/ssi/xilinx_spips.c
+++ b/hw/ssi/xilinx_spips.c
@@ -92,8 +92,9 @@
 #define R_LQSPI_CFG_RESET       0x03A002EB
 #define LQSPI_CFG_LQ_MODE       (1U << 31)
 #define LQSPI_CFG_TWO_MEM       (1 << 30)
-#define LQSPI_CFG_SEP_BUS       (1 << 30)
+#define LQSPI_CFG_SEP_BUS       (1 << 29)
 #define LQSPI_CFG_U_PAGE        (1 << 28)
+#define LQSPI_CFG_ADDR4         (1 << 27)
 #define LQSPI_CFG_MODE_EN       (1 << 25)
 #define LQSPI_CFG_MODE_WIDTH    8
 #define LQSPI_CFG_MODE_SHIFT    16
@@ -702,6 +703,9 @@ static void lqspi_load_cache(void *opaque, hwaddr addr)
         fifo8_push(&s->tx_fifo, s->regs[R_LQSPI_CFG] & LQSPI_CFG_INST_CODE);
         /* read address */
         DB_PRINT_L(0, "pushing read address %06x\n", flash_addr);
+        if (s->regs[R_LQSPI_CFG] & LQSPI_CFG_ADDR4) {
+            fifo8_push(&s->tx_fifo, (uint8_t)(flash_addr >> 24));
+        }
         fifo8_push(&s->tx_fifo, (uint8_t)(flash_addr >> 16));
         fifo8_push(&s->tx_fifo, (uint8_t)(flash_addr >> 8));
         fifo8_push(&s->tx_fifo, (uint8_t)flash_addr);
-- 
2.9.3