From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, mreitz@redhat.com, peter.maydell@linaro.org,
qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 07/10] blockjob: remove clock argument from block_job_sleep_ns
Date: Wed, 29 Nov 2017 16:26:25 +0100 [thread overview]
Message-ID: <20171129152628.14906-8-kwolf@redhat.com> (raw)
In-Reply-To: <20171129152628.14906-1-kwolf@redhat.com>
From: Paolo Bonzini <pbonzini@redhat.com>
All callers are using QEMU_CLOCK_REALTIME, and it will not be possible to
support more than one clock when block_job_sleep_ns switches to a single
timer stored in the BlockJob struct.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Tested-By: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/block/blockjob_int.h | 7 +++----
block/backup.c | 4 ++--
block/commit.c | 2 +-
block/mirror.c | 6 +++---
block/stream.c | 2 +-
blockjob.c | 5 +++--
tests/test-blockjob-txn.c | 2 +-
7 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/include/block/blockjob_int.h b/include/block/blockjob_int.h
index 43f3be2965..f7ab183a39 100644
--- a/include/block/blockjob_int.h
+++ b/include/block/blockjob_int.h
@@ -139,14 +139,13 @@ void *block_job_create(const char *job_id, const BlockJobDriver *driver,
/**
* block_job_sleep_ns:
* @job: The job that calls the function.
- * @clock: The clock to sleep on.
* @ns: How many nanoseconds to stop for.
*
* Put the job to sleep (assuming that it wasn't canceled) for @ns
- * nanoseconds. Canceling the job will not interrupt the wait, so the
- * cancel will not process until the coroutine wakes up.
+ * %QEMU_CLOCK_REALTIME nanoseconds. Canceling the job will not interrupt
+ * the wait, so the cancel will not process until the coroutine wakes up.
*/
-void block_job_sleep_ns(BlockJob *job, QEMUClockType type, int64_t ns);
+void block_job_sleep_ns(BlockJob *job, int64_t ns);
/**
* block_job_yield:
diff --git a/block/backup.c b/block/backup.c
index 06ddbfd03d..99e6bcc748 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -346,9 +346,9 @@ static bool coroutine_fn yield_and_check(BackupBlockJob *job)
uint64_t delay_ns = ratelimit_calculate_delay(&job->limit,
job->bytes_read);
job->bytes_read = 0;
- block_job_sleep_ns(&job->common, QEMU_CLOCK_REALTIME, delay_ns);
+ block_job_sleep_ns(&job->common, delay_ns);
} else {
- block_job_sleep_ns(&job->common, QEMU_CLOCK_REALTIME, 0);
+ block_job_sleep_ns(&job->common, 0);
}
if (block_job_is_cancelled(&job->common)) {
diff --git a/block/commit.c b/block/commit.c
index 5036eec434..c5327551ce 100644
--- a/block/commit.c
+++ b/block/commit.c
@@ -174,7 +174,7 @@ static void coroutine_fn commit_run(void *opaque)
/* Note that even when no rate limit is applied we need to yield
* with no pending I/O here so that bdrv_drain_all() returns.
*/
- block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, delay_ns);
+ block_job_sleep_ns(&s->common, delay_ns);
if (block_job_is_cancelled(&s->common)) {
break;
}
diff --git a/block/mirror.c b/block/mirror.c
index 307b6391a8..c9badc1203 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -598,7 +598,7 @@ static void mirror_throttle(MirrorBlockJob *s)
if (now - s->last_pause_ns > SLICE_TIME) {
s->last_pause_ns = now;
- block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, 0);
+ block_job_sleep_ns(&s->common, 0);
} else {
block_job_pause_point(&s->common);
}
@@ -870,13 +870,13 @@ static void coroutine_fn mirror_run(void *opaque)
ret = 0;
trace_mirror_before_sleep(s, cnt, s->synced, delay_ns);
if (!s->synced) {
- block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, delay_ns);
+ block_job_sleep_ns(&s->common, delay_ns);
if (block_job_is_cancelled(&s->common)) {
break;
}
} else if (!should_complete) {
delay_ns = (s->in_flight == 0 && cnt == 0 ? SLICE_TIME : 0);
- block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, delay_ns);
+ block_job_sleep_ns(&s->common, delay_ns);
}
s->last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
}
diff --git a/block/stream.c b/block/stream.c
index e6f72346e5..499cdacdb0 100644
--- a/block/stream.c
+++ b/block/stream.c
@@ -141,7 +141,7 @@ static void coroutine_fn stream_run(void *opaque)
/* Note that even when no rate limit is applied we need to yield
* with no pending I/O here so that bdrv_drain_all() returns.
*/
- block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, delay_ns);
+ block_job_sleep_ns(&s->common, delay_ns);
if (block_job_is_cancelled(&s->common)) {
break;
}
diff --git a/blockjob.c b/blockjob.c
index 2f0cc1528b..db9e4fc89a 100644
--- a/blockjob.c
+++ b/blockjob.c
@@ -788,7 +788,7 @@ bool block_job_is_cancelled(BlockJob *job)
return job->cancelled;
}
-void block_job_sleep_ns(BlockJob *job, QEMUClockType type, int64_t ns)
+void block_job_sleep_ns(BlockJob *job, int64_t ns)
{
assert(job->busy);
@@ -803,7 +803,8 @@ void block_job_sleep_ns(BlockJob *job, QEMUClockType type, int64_t ns)
* it wakes and runs, otherwise we risk double-entry or entry after
* completion. */
if (!block_job_should_pause(job)) {
- co_aio_sleep_ns(blk_get_aio_context(job->blk), type, ns);
+ co_aio_sleep_ns(blk_get_aio_context(job->blk),
+ QEMU_CLOCK_REALTIME, ns);
}
block_job_pause_point(job);
diff --git a/tests/test-blockjob-txn.c b/tests/test-blockjob-txn.c
index c77343fc04..3591c9617f 100644
--- a/tests/test-blockjob-txn.c
+++ b/tests/test-blockjob-txn.c
@@ -44,7 +44,7 @@ static void coroutine_fn test_block_job_run(void *opaque)
while (s->iterations--) {
if (s->use_timer) {
- block_job_sleep_ns(job, QEMU_CLOCK_REALTIME, 0);
+ block_job_sleep_ns(job, 0);
} else {
block_job_yield(job);
}
--
2.13.6
next prev parent reply other threads:[~2017-11-29 15:26 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-29 15:26 [Qemu-devel] [PULL 00/10] Block layer fixes for 2.11.0-rc3 Kevin Wolf
2017-11-29 15:26 ` [Qemu-devel] [PULL 01/10] iotests: fix 075 and 078 Kevin Wolf
2017-11-29 15:26 ` [Qemu-devel] [PULL 02/10] docs: Add image locking subsection Kevin Wolf
2017-11-29 15:26 ` [Qemu-devel] [PULL 03/10] qemu-options: Mention locking option of file driver Kevin Wolf
2017-11-29 15:26 ` [Qemu-devel] [PULL 04/10] QAPI & interop: Clarify events emitted by 'block-job-cancel' Kevin Wolf
2017-11-29 15:26 ` [Qemu-devel] [PULL 05/10] blockjob: Remove the job from the list earlier in block_job_unref() Kevin Wolf
2017-11-29 15:26 ` [Qemu-devel] [PULL 06/10] block: Expect graph changes in bdrv_parent_drained_begin/end Kevin Wolf
2017-11-29 15:26 ` Kevin Wolf [this message]
2017-11-29 15:26 ` [Qemu-devel] [PULL 08/10] blockjob: introduce block_job_do_yield Kevin Wolf
2017-11-29 15:26 ` [Qemu-devel] [PULL 09/10] blockjob: reimplement block_job_sleep_ns to allow cancellation Kevin Wolf
2017-11-29 15:26 ` [Qemu-devel] [PULL 10/10] block/nfs: fix nfs_client_open for filesize greater than 1TB Kevin Wolf
2017-11-29 17:59 ` [Qemu-devel] [PULL 00/10] Block layer fixes for 2.11.0-rc3 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171129152628.14906-8-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).