From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Peter Xu <peterx@redhat.com>
Cc: qemu-devel@nongnu.org, Andrea Arcangeli <aarcange@redhat.com>,
"Daniel P . Berrange" <berrange@redhat.com>,
Juan Quintela <quintela@redhat.com>,
Alexey Perevalov <a.perevalov@samsung.com>
Subject: Re: [Qemu-devel] [PATCH v5 01/28] migration: better error handling with QEMUFile
Date: Tue, 5 Dec 2017 11:40:50 +0000 [thread overview]
Message-ID: <20171205114049.GA2405@work-vm> (raw)
In-Reply-To: <20171205065307.21853-2-peterx@redhat.com>
* Peter Xu (peterx@redhat.com) wrote:
> If the postcopy down due to some reason, we can always see this on dst:
>
> qemu-system-x86_64: RP: Received invalid message 0x0000 length 0x0000
>
> However in most cases that's not the real issue. The problem is that
> qemu_get_be16() has no way to show whether the returned data is valid or
> not, and we are _always_ assuming it is valid. That's possibly not wise.
>
> The best approach to solve this would be: refactoring QEMUFile interface
> to allow the APIs to return error if there is. However it needs quite a
> bit of work and testing. For now, let's explicitly check the validity
> first before using the data in all places for qemu_get_*().
>
> This patch tries to fix most of the cases I can see. Only if we are with
> this, can we make sure we are processing the valid data, and also can we
> make sure we can capture the channel down events correctly.
>
> Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
> migration/migration.c | 5 +++++
> migration/ram.c | 21 +++++++++++++++++----
> migration/savevm.c | 40 ++++++++++++++++++++++++++++++++++++++--
> 3 files changed, 60 insertions(+), 6 deletions(-)
>
> diff --git a/migration/migration.c b/migration/migration.c
> index c0206023d7..eae34d0524 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -1708,6 +1708,11 @@ static void *source_return_path_thread(void *opaque)
> header_type = qemu_get_be16(rp);
> header_len = qemu_get_be16(rp);
>
> + if (qemu_file_get_error(rp)) {
> + mark_source_rp_bad(ms);
> + goto out;
> + }
> +
> if (header_type >= MIG_RP_MSG_MAX ||
> header_type == MIG_RP_MSG_INVALID) {
> error_report("RP: Received invalid message 0x%04x length 0x%04x",
> diff --git a/migration/ram.c b/migration/ram.c
> index 021d583b9b..f159c16f6a 100644
> --- a/migration/ram.c
> +++ b/migration/ram.c
> @@ -2696,6 +2696,16 @@ static int ram_load_postcopy(QEMUFile *f)
> uint8_t ch;
>
> addr = qemu_get_be64(f);
> +
> + /*
> + * If qemu file error, we should stop here, and then "addr"
> + * may be invalid
> + */
> + ret = qemu_file_get_error(f);
> + if (ret) {
> + break;
> + }
> +
> flags = addr & ~TARGET_PAGE_MASK;
> addr &= TARGET_PAGE_MASK;
>
> @@ -2776,9 +2786,15 @@ static int ram_load_postcopy(QEMUFile *f)
> error_report("Unknown combination of migration flags: %#x"
> " (postcopy mode)", flags);
> ret = -EINVAL;
> + break;
> + }
> +
> + /* Detect for any possible file errors */
> + if (!ret && qemu_file_get_error(f)) {
> + ret = qemu_file_get_error(f);
> }
>
> - if (place_needed) {
> + if (!ret && place_needed) {
> /* This gets called at the last target page in the host page */
> void *place_dest = host + TARGET_PAGE_SIZE - block->page_size;
>
> @@ -2790,9 +2806,6 @@ static int ram_load_postcopy(QEMUFile *f)
> place_source, block);
> }
> }
> - if (!ret) {
> - ret = qemu_file_get_error(f);
> - }
> }
>
> return ret;
> diff --git a/migration/savevm.c b/migration/savevm.c
> index b7908f62be..8814793255 100644
> --- a/migration/savevm.c
> +++ b/migration/savevm.c
> @@ -1765,6 +1765,11 @@ static int loadvm_process_command(QEMUFile *f)
> cmd = qemu_get_be16(f);
> len = qemu_get_be16(f);
>
> + /* Check validity before continue processing of cmds */
> + if (qemu_file_get_error(f)) {
> + return qemu_file_get_error(f);
> + }
> +
> trace_loadvm_process_command(cmd, len);
> if (cmd >= MIG_CMD_MAX || cmd == MIG_CMD_INVALID) {
> error_report("MIG_CMD 0x%x unknown (len 0x%x)", cmd, len);
> @@ -1830,6 +1835,7 @@ static int loadvm_process_command(QEMUFile *f)
> */
> static bool check_section_footer(QEMUFile *f, SaveStateEntry *se)
> {
> + int ret;
> uint8_t read_mark;
> uint32_t read_section_id;
>
> @@ -1840,6 +1846,13 @@ static bool check_section_footer(QEMUFile *f, SaveStateEntry *se)
>
> read_mark = qemu_get_byte(f);
>
> + ret = qemu_file_get_error(f);
> + if (ret) {
> + error_report("%s: Read section footer failed: %d",
> + __func__, ret);
> + return false;
> + }
> +
> if (read_mark != QEMU_VM_SECTION_FOOTER) {
> error_report("Missing section footer for %s", se->idstr);
> return false;
> @@ -1875,6 +1888,13 @@ qemu_loadvm_section_start_full(QEMUFile *f, MigrationIncomingState *mis)
> instance_id = qemu_get_be32(f);
> version_id = qemu_get_be32(f);
>
> + ret = qemu_file_get_error(f);
> + if (ret) {
> + error_report("%s: Failed to read instance/version ID: %d",
> + __func__, ret);
> + return ret;
> + }
> +
> trace_qemu_loadvm_state_section_startfull(section_id, idstr,
> instance_id, version_id);
> /* Find savevm section */
> @@ -1922,6 +1942,13 @@ qemu_loadvm_section_part_end(QEMUFile *f, MigrationIncomingState *mis)
>
> section_id = qemu_get_be32(f);
>
> + ret = qemu_file_get_error(f);
> + if (ret) {
> + error_report("%s: Failed to read section ID: %d",
> + __func__, ret);
> + return ret;
> + }
> +
> trace_qemu_loadvm_state_section_partend(section_id);
> QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
> if (se->load_section_id == section_id) {
> @@ -1989,8 +2016,14 @@ static int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis)
> uint8_t section_type;
> int ret = 0;
>
> - while ((section_type = qemu_get_byte(f)) != QEMU_VM_EOF) {
> - ret = 0;
> + while (true) {
> + section_type = qemu_get_byte(f);
> +
> + if (qemu_file_get_error(f)) {
> + ret = qemu_file_get_error(f);
> + break;
> + }
> +
> trace_qemu_loadvm_state_section(section_type);
> switch (section_type) {
> case QEMU_VM_SECTION_START:
> @@ -2014,6 +2047,9 @@ static int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis)
> goto out;
> }
> break;
> + case QEMU_VM_EOF:
> + /* This is the end of migration */
> + goto out;
> default:
> error_report("Unknown savevm section type %d", section_type);
> ret = -EINVAL;
> --
> 2.14.3
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
next prev parent reply other threads:[~2017-12-05 11:41 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-05 6:52 [Qemu-devel] [PATCH v5 00/28] Migration: postcopy failure recovery Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 01/28] migration: better error handling with QEMUFile Peter Xu
2017-12-05 11:40 ` Dr. David Alan Gilbert [this message]
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 02/28] migration: reuse mis->userfault_quit_fd Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 03/28] migration: provide postcopy_fault_thread_notify() Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 04/28] migration: new postcopy-pause state Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 05/28] migration: implement "postcopy-pause" src logic Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 06/28] migration: allow dst vm pause on postcopy Peter Xu
2017-12-14 13:10 ` Dr. David Alan Gilbert
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 07/28] migration: allow src return path to pause Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 08/28] migration: allow send_rq to fail Peter Xu
2017-12-14 13:21 ` Dr. David Alan Gilbert
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 09/28] migration: allow fault thread to pause Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 10/28] qmp: hmp: add migrate "resume" option Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 11/28] migration: pass MigrationState to migrate_init() Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 12/28] migration: rebuild channel on source Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 13/28] migration: new state "postcopy-recover" Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 14/28] migration: wakeup dst ram-load-thread for recover Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 15/28] migration: new cmd MIG_CMD_RECV_BITMAP Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 16/28] migration: new message MIG_RP_MSG_RECV_BITMAP Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 17/28] migration: new cmd MIG_CMD_POSTCOPY_RESUME Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 18/28] migration: new message MIG_RP_MSG_RESUME_ACK Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 19/28] migration: introduce SaveVMHandlers.resume_prepare Peter Xu
2017-12-05 6:52 ` [Qemu-devel] [PATCH v5 20/28] migration: synchronize dirty bitmap for resume Peter Xu
2017-12-05 6:53 ` [Qemu-devel] [PATCH v5 21/28] migration: setup ramstate " Peter Xu
2017-12-05 6:53 ` [Qemu-devel] [PATCH v5 22/28] migration: final handshake for the resume Peter Xu
2017-12-05 6:53 ` [Qemu-devel] [PATCH v5 23/28] migration: free SocketAddress where allocated Peter Xu
2017-12-05 6:53 ` [Qemu-devel] [PATCH v5 24/28] migration: init dst in migration_object_init too Peter Xu
2017-12-05 6:53 ` [Qemu-devel] [PATCH v5 25/28] io: let watcher of the channel run in same ctx Peter Xu
2017-12-05 6:53 ` [Qemu-devel] [PATCH v5 26/28] migration: allow migrate_cancel to pause postcopy Peter Xu
2017-12-19 10:58 ` Dr. David Alan Gilbert
2018-01-24 8:28 ` Peter Xu
2018-01-24 9:06 ` Dr. David Alan Gilbert
2017-12-05 6:53 ` [Qemu-devel] [PATCH v5 27/28] qmp/migration: new command migrate-recover Peter Xu
2017-12-05 6:53 ` [Qemu-devel] [PATCH v5 28/28] hmp/migration: add migrate_recover command Peter Xu
2017-12-05 6:55 ` [Qemu-devel] [PATCH v5 00/28] Migration: postcopy failure recovery Peter Xu
2017-12-05 18:43 ` Dr. David Alan Gilbert
2017-12-06 2:39 ` Peter Xu
2018-01-11 16:59 ` Dr. David Alan Gilbert
2018-01-12 9:27 ` Peter Xu
2018-01-12 12:27 ` Dr. David Alan Gilbert
2018-01-24 6:19 ` Peter Xu
2018-01-24 9:05 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171205114049.GA2405@work-vm \
--to=dgilbert@redhat.com \
--cc=a.perevalov@samsung.com \
--cc=aarcange@redhat.com \
--cc=berrange@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).