From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, famz@redhat.com, qemu-block@nongnu.org,
vsementsov@virtuozzo.com, Stefan Hajnoczi <stefanha@redhat.com>,
Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v6 12/20] qed: Switch to .bdrv_co_block_status()
Date: Thu, 7 Dec 2017 14:30:28 -0600 [thread overview]
Message-ID: <20171207203036.14993-13-eblake@redhat.com> (raw)
In-Reply-To: <20171207203036.14993-1-eblake@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the qed driver accordingly, taking the opportunity
to inline qed_is_allocated_cb() into its lone caller (the callback
used to be important, until we switched qed to coroutines). There is
no intent to optimize based on the want_zero flag for this format.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
v5: initialize len before qed_find_cluster() [Vladimir]
v4: rebase to interface change, inline pointless callback
v3: no change
v2: rebase to mapping flag, fix mask in qed_is_allocated_cb
---
block/qed.c | 84 +++++++++++++++++++++----------------------------------------
1 file changed, 28 insertions(+), 56 deletions(-)
diff --git a/block/qed.c b/block/qed.c
index 821dcaa055..13fbc3e2f1 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -688,74 +688,46 @@ finish:
return ret;
}
-typedef struct {
- BlockDriverState *bs;
- Coroutine *co;
- uint64_t pos;
- int64_t status;
- int *pnum;
- BlockDriverState **file;
-} QEDIsAllocatedCB;
-
-/* Called with table_lock held. */
-static void qed_is_allocated_cb(void *opaque, int ret, uint64_t offset, size_t len)
-{
- QEDIsAllocatedCB *cb = opaque;
- BDRVQEDState *s = cb->bs->opaque;
- *cb->pnum = len / BDRV_SECTOR_SIZE;
- switch (ret) {
- case QED_CLUSTER_FOUND:
- offset |= qed_offset_into_cluster(s, cb->pos);
- cb->status = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | offset;
- *cb->file = cb->bs->file->bs;
- break;
- case QED_CLUSTER_ZERO:
- cb->status = BDRV_BLOCK_ZERO;
- break;
- case QED_CLUSTER_L2:
- case QED_CLUSTER_L1:
- cb->status = 0;
- break;
- default:
- assert(ret < 0);
- cb->status = ret;
- break;
- }
-
- if (cb->co) {
- aio_co_wake(cb->co);
- }
-}
-
-static int64_t coroutine_fn bdrv_qed_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors, int *pnum,
+static int coroutine_fn bdrv_qed_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t pos, int64_t bytes,
+ int64_t *pnum, int64_t *map,
BlockDriverState **file)
{
BDRVQEDState *s = bs->opaque;
- size_t len = (size_t)nb_sectors * BDRV_SECTOR_SIZE;
- QEDIsAllocatedCB cb = {
- .bs = bs,
- .pos = (uint64_t)sector_num * BDRV_SECTOR_SIZE,
- .status = BDRV_BLOCK_OFFSET_MASK,
- .pnum = pnum,
- .file = file,
- };
+ size_t len = MIN(bytes, SIZE_MAX);
+ int status;
QEDRequest request = { .l2_table = NULL };
uint64_t offset;
int ret;
qemu_co_mutex_lock(&s->table_lock);
- ret = qed_find_cluster(s, &request, cb.pos, &len, &offset);
- qed_is_allocated_cb(&cb, ret, offset, len);
+ ret = qed_find_cluster(s, &request, pos, &len, &offset);
- /* The callback was invoked immediately */
- assert(cb.status != BDRV_BLOCK_OFFSET_MASK);
+ *pnum = len;
+ switch (ret) {
+ case QED_CLUSTER_FOUND:
+ *map = offset | qed_offset_into_cluster(s, pos);
+ status = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
+ *file = bs->file->bs;
+ break;
+ case QED_CLUSTER_ZERO:
+ status = BDRV_BLOCK_ZERO;
+ break;
+ case QED_CLUSTER_L2:
+ case QED_CLUSTER_L1:
+ status = 0;
+ break;
+ default:
+ assert(ret < 0);
+ status = ret;
+ break;
+ }
qed_unref_l2_cache_entry(request.l2_table);
qemu_co_mutex_unlock(&s->table_lock);
- return cb.status;
+ return status;
}
static BDRVQEDState *acb_to_s(QEDAIOCB *acb)
@@ -1595,7 +1567,7 @@ static BlockDriver bdrv_qed = {
.bdrv_child_perm = bdrv_format_default_perms,
.bdrv_create = bdrv_qed_create,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
- .bdrv_co_get_block_status = bdrv_qed_co_get_block_status,
+ .bdrv_co_block_status = bdrv_qed_co_block_status,
.bdrv_co_readv = bdrv_qed_co_readv,
.bdrv_co_writev = bdrv_qed_co_writev,
.bdrv_co_pwrite_zeroes = bdrv_qed_co_pwrite_zeroes,
--
2.14.3
next prev parent reply other threads:[~2017-12-07 20:32 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-07 20:30 [Qemu-devel] [PATCH v6 00/20] add byte-based block_status driver callbacks Eric Blake
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 01/20] block: Add .bdrv_co_block_status() callback Eric Blake
2017-12-09 10:15 ` Vladimir Sementsov-Ogievskiy
2017-12-09 13:26 ` Vladimir Sementsov-Ogievskiy
2017-12-29 2:35 ` Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 02/20] block: Switch passthrough drivers to .bdrv_co_block_status() Eric Blake
2017-12-29 2:37 ` Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 03/20] file-posix: Switch " Eric Blake
2017-12-09 11:52 ` Vladimir Sementsov-Ogievskiy
2017-12-29 2:41 ` Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 04/20] gluster: " Eric Blake
2017-12-09 11:55 ` Vladimir Sementsov-Ogievskiy
2017-12-29 2:42 ` Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 05/20] iscsi: Switch cluster_sectors to byte-based Eric Blake
2017-12-29 2:49 ` Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 06/20] iscsi: Switch iscsi_allocmap_update() " Eric Blake
2017-12-29 3:25 ` Fam Zheng
2018-01-02 21:43 ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-01-02 22:36 ` Eric Blake
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 07/20] iscsi: Switch to .bdrv_co_block_status() Eric Blake
2017-12-29 3:20 ` Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 08/20] null: " Eric Blake
2017-12-29 2:56 ` Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 09/20] parallels: " Eric Blake
2017-12-09 12:31 ` Vladimir Sementsov-Ogievskiy
2017-12-09 16:39 ` Eric Blake
2017-12-11 9:14 ` Vladimir Sementsov-Ogievskiy
2017-12-11 15:24 ` Vladimir Sementsov-Ogievskiy
2017-12-12 16:32 ` Eric Blake
2017-12-12 16:49 ` Vladimir Sementsov-Ogievskiy
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 10/20] qcow: " Eric Blake
2017-12-29 3:00 ` Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 11/20] qcow2: " Eric Blake
2017-12-29 3:01 ` Fam Zheng
2017-12-07 20:30 ` Eric Blake [this message]
2017-12-29 3:06 ` [Qemu-devel] [PATCH v6 12/20] qed: " Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 13/20] raw: " Eric Blake
2017-12-29 3:07 ` Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 14/20] sheepdog: " Eric Blake
2017-12-29 3:08 ` Fam Zheng
2018-01-02 21:52 ` Jeff Cody
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 15/20] vdi: Avoid bitrot of debugging code Eric Blake
2017-12-29 3:09 ` Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 16/20] vdi: Switch to .bdrv_co_block_status() Eric Blake
2017-12-29 3:10 ` Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 17/20] vmdk: " Eric Blake
2017-12-09 12:36 ` Vladimir Sementsov-Ogievskiy
2017-12-29 3:16 ` Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 18/20] vpc: " Eric Blake
2017-12-09 13:42 ` Vladimir Sementsov-Ogievskiy
2017-12-29 2:55 ` Fam Zheng
2018-01-02 20:30 ` Eric Blake
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 19/20] vvfat: " Eric Blake
2017-12-29 3:26 ` Fam Zheng
2017-12-07 20:30 ` [Qemu-devel] [PATCH v6 20/20] block: Drop unused .bdrv_co_get_block_status() Eric Blake
2017-12-09 13:23 ` Vladimir Sementsov-Ogievskiy
2017-12-29 3:27 ` Fam Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171207203036.14993-13-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=famz@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
--cc=vsementsov@virtuozzo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).