From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 12/14] qcow2: get rid of qcow2_backing_read1 routine
Date: Wed, 20 Dec 2017 14:19:37 +0100 [thread overview]
Message-ID: <20171220131939.27543-13-kwolf@redhat.com> (raw)
In-Reply-To: <20171220131939.27543-1-kwolf@redhat.com>
From: Edgar Kaziakhmedov <edgar.kaziakhmedov@virtuozzo.com>
Since bdrv_co_preadv does all neccessary checks including
reading after the end of the backing file, avoid duplication
of verification before bdrv_co_preadv call.
Signed-off-by: Edgar Kaziakhmedov <edgar.kaziakhmedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/qcow2.h | 3 ---
block/qcow2.c | 51 ++++++++-------------------------------------------
2 files changed, 8 insertions(+), 46 deletions(-)
diff --git a/block/qcow2.h b/block/qcow2.h
index 6f0ff15dd0..46c8cf44ec 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -528,9 +528,6 @@ uint32_t offset_to_reftable_index(BDRVQcow2State *s, uint64_t offset)
}
/* qcow2.c functions */
-int qcow2_backing_read1(BlockDriverState *bs, QEMUIOVector *qiov,
- int64_t sector_num, int nb_sectors);
-
int64_t qcow2_refcount_metadata_size(int64_t clusters, size_t cluster_size,
int refcount_order, bool generous_increase,
uint64_t *refblock_count);
diff --git a/block/qcow2.c b/block/qcow2.c
index 1914a940e5..4348b2c0c5 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -1672,34 +1672,12 @@ static int64_t coroutine_fn qcow2_co_get_block_status(BlockDriverState *bs,
return status;
}
-/* handle reading after the end of the backing file */
-int qcow2_backing_read1(BlockDriverState *bs, QEMUIOVector *qiov,
- int64_t offset, int bytes)
-{
- uint64_t bs_size = bs->total_sectors * BDRV_SECTOR_SIZE;
- int n1;
-
- if ((offset + bytes) <= bs_size) {
- return bytes;
- }
-
- if (offset >= bs_size) {
- n1 = 0;
- } else {
- n1 = bs_size - offset;
- }
-
- qemu_iovec_memset(qiov, n1, 0, bytes - n1);
-
- return n1;
-}
-
static coroutine_fn int qcow2_co_preadv(BlockDriverState *bs, uint64_t offset,
uint64_t bytes, QEMUIOVector *qiov,
int flags)
{
BDRVQcow2State *s = bs->opaque;
- int offset_in_cluster, n1;
+ int offset_in_cluster;
int ret;
unsigned int cur_bytes; /* number of bytes in current iteration */
uint64_t cluster_offset = 0;
@@ -1734,26 +1712,13 @@ static coroutine_fn int qcow2_co_preadv(BlockDriverState *bs, uint64_t offset,
case QCOW2_CLUSTER_UNALLOCATED:
if (bs->backing) {
- /* read from the base image */
- n1 = qcow2_backing_read1(bs->backing->bs, &hd_qiov,
- offset, cur_bytes);
- if (n1 > 0) {
- QEMUIOVector local_qiov;
-
- qemu_iovec_init(&local_qiov, hd_qiov.niov);
- qemu_iovec_concat(&local_qiov, &hd_qiov, 0, n1);
-
- BLKDBG_EVENT(bs->file, BLKDBG_READ_BACKING_AIO);
- qemu_co_mutex_unlock(&s->lock);
- ret = bdrv_co_preadv(bs->backing, offset, n1,
- &local_qiov, 0);
- qemu_co_mutex_lock(&s->lock);
-
- qemu_iovec_destroy(&local_qiov);
-
- if (ret < 0) {
- goto fail;
- }
+ BLKDBG_EVENT(bs->file, BLKDBG_READ_BACKING_AIO);
+ qemu_co_mutex_unlock(&s->lock);
+ ret = bdrv_co_preadv(bs->backing, offset, cur_bytes,
+ &hd_qiov, 0);
+ qemu_co_mutex_lock(&s->lock);
+ if (ret < 0) {
+ goto fail;
}
} else {
/* Note: in this case, no need to wait */
--
2.13.6
next prev parent reply other threads:[~2017-12-20 13:20 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-20 13:19 [Qemu-devel] [PULL 00/14] Block layer patches Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 01/14] hw/block/nvme: Convert to realize Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 02/14] block: Formats don't need CONSISTENT_READ with NO_IO Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 03/14] iotests: fix 197 for vpc Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 04/14] block: Make bdrv_drain_invoke() recursive Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 05/14] block: Call .drain_begin only once in bdrv_drain_all_begin() Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 06/14] test-bdrv-drain: Test BlockDriver callbacks for drain Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 07/14] block: bdrv_drain_recurse(): Remove unused begin parameter Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 08/14] block: Don't wait for requests in bdrv_drain*_end() Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 09/14] block: Unify order in drain functions Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 10/14] qemu-img: Document --force-share / -U Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 11/14] block: Don't acquire AioContext in hmp_qemu_io() Kevin Wolf
2017-12-20 13:19 ` Kevin Wolf [this message]
2017-12-20 13:19 ` [Qemu-devel] [PULL 13/14] block: Document that x-blockdev-change breaks quorum children list Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 14/14] nvme: Add tracing Kevin Wolf
2017-12-20 15:30 ` [Qemu-devel] [PULL 00/14] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171220131939.27543-13-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).