From: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
To: Alistair Francis <alistair.francis@xilinx.com>,
"Edgar E . Iglesias" <edgar.iglesias@xilinx.com>,
Peter Maydell <peter.maydell@linaro.org>,
Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>,
qemu-devel@nongnu.org,
"Peter Crosthwaite" <crosthwaite.peter@gmail.com>
Subject: [Qemu-devel] [PATCH v3 18/42] sdhci: add a spec_version property
Date: Fri, 29 Dec 2017 14:49:09 -0300 [thread overview]
Message-ID: <20171229174933.1781-19-f4bug@amsat.org> (raw)
In-Reply-To: <20171229174933.1781-1-f4bug@amsat.org>
default to Spec v2.00
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/sd/sdhci-internal.h | 4 ++--
include/hw/sd/sdhci.h | 3 +++
hw/sd/sdhci.c | 19 +++++++++++++++++--
3 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/hw/sd/sdhci-internal.h b/hw/sd/sdhci-internal.h
index b7475a1b7b..cf4a055159 100644
--- a/hw/sd/sdhci-internal.h
+++ b/hw/sd/sdhci-internal.h
@@ -212,9 +212,9 @@ FIELD(SDHC_PRNSTS, WRITE_PROTECT, 19, 1);
/* Slot interrupt status */
#define SDHC_SLOT_INT_STATUS 0xFC
-/* HWInit Host Controller Version Register 0x0401 */
+/* HWInit Host Controller Version Register */
#define SDHC_HCVER 0xFE
-#define SD_HOST_SPECv2_VERS 0x2401
+#define SDHC_HCVER_VENDOR 0x24
#define SDHC_REGISTERS_MAP_SIZE 0x100
#define SDHC_INSERTION_DELAY (NANOSECONDS_PER_SECOND)
diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
index 2aea20f1d8..ddd5040410 100644
--- a/include/hw/sd/sdhci.h
+++ b/include/hw/sd/sdhci.h
@@ -91,6 +91,8 @@ typedef struct SDHCIState {
uint64_t capareg; /* Capabilities Register */
/* 0x48 */
uint64_t maxcurr; /* Maximum Current Capabilities Register */
+ /* 0xfe */
+ uint16_t version; /* Host Controller Version Register */
uint8_t *fifo_buffer; /* SD host i/o FIFO buffer */
uint32_t buf_maxsz;
@@ -99,6 +101,7 @@ typedef struct SDHCIState {
bool pending_insert_state;
/* Configurable properties */
bool pending_insert_quirk; /* Quirk for Raspberry Pi card insert int */
+ uint8_t spec_version;
} SDHCIState;
#define TYPE_PCI_SDHCI "sdhci-pci"
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 73b21d0690..bd13f2a0b6 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -169,7 +169,8 @@ static void sdhci_reset(SDHCIState *s)
timer_del(s->insert_timer);
timer_del(s->transfer_timer);
- /* Set all registers to 0. Capabilities registers are not cleared
+
+ /* Set all registers to 0. Capabilities/Version registers are not cleared
* and assumed to always preserve their value, given to them during
* initialization */
memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - (uintptr_t)&s->sdmasysad);
@@ -923,7 +924,7 @@ static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size)
ret = (uint32_t)(s->admasysaddr >> 32);
break;
case SDHC_SLOT_INT_STATUS:
- ret = (SD_HOST_SPECv2_VERS << 16) | sdhci_slotint(s);
+ ret = (s->version << 16) | sdhci_slotint(s);
break;
default:
qemu_log_mask(LOG_UNIMP, "SDHC rd_%ub @0x%02" HWADDR_PRIx " "
@@ -1178,6 +1179,15 @@ static inline unsigned int sdhci_get_fifolen(SDHCIState *s)
}
}
+static void sdhci_init_readonly_registers(SDHCIState *s, Error **errp)
+{
+ if (s->spec_version < 1) {
+ error_setg(errp, "spec version invalid");
+ return;
+ }
+ s->version = (SDHC_HCVER_VENDOR << 8) | (s->spec_version - 1);
+}
+
static void sdhci_initfn(SDHCIState *s)
{
qbus_create_inplace(&s->sdbus, sizeof(s->sdbus),
@@ -1190,6 +1200,10 @@ static void sdhci_initfn(SDHCIState *s)
static void sdhci_realizefn(SDHCIState *s, Error **errp)
{
+ sdhci_init_readonly_registers(s, errp);
+ if (errp && *errp) {
+ return;
+ }
s->buf_maxsz = sdhci_get_fifolen(s);
s->fifo_buffer = g_malloc0(s->buf_maxsz);
@@ -1284,6 +1298,7 @@ const VMStateDescription sdhci_vmstate = {
/* Capabilities registers provide information on supported features of this
* specific host controller implementation */
static Property sdhci_properties[] = {
+ DEFINE_PROP_UINT8("sd-spec-version", SDHCIState, spec_version, 1),
DEFINE_PROP_UINT64("capareg", SDHCIState, capareg,
SDHC_CAPAB_REG_DEFAULT),
DEFINE_PROP_UINT64("maxcurr", SDHCIState, maxcurr, 0),
--
2.15.1
next prev parent reply other threads:[~2017-12-29 17:50 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-29 17:48 [Qemu-devel] [PATCH v3 00/42] SDHCI: housekeeping, add a qtest and fix few issues Philippe Mathieu-Daudé
2017-12-29 17:48 ` [Qemu-devel] [PATCH v3 01/42] sdhci: clean up includes Philippe Mathieu-Daudé
2017-12-29 17:48 ` [Qemu-devel] [PATCH v3 02/42] sdhci: sort registers comments Philippe Mathieu-Daudé
2018-01-03 0:05 ` Alistair Francis
2017-12-29 17:48 ` [Qemu-devel] [PATCH v3 03/42] sdhci: remove dead code Philippe Mathieu-Daudé
2018-01-03 0:06 ` Alistair Francis
2017-12-29 17:48 ` [Qemu-devel] [PATCH v3 04/42] sdhci: refactor same sysbus/pci properties into a common one Philippe Mathieu-Daudé
2018-01-03 7:46 ` Fam Zheng
2017-12-29 17:48 ` [Qemu-devel] [PATCH v3 05/42] sdhci: refactor common sysbus/pci class_init() into sdhci_class_init() Philippe Mathieu-Daudé
2018-01-03 7:49 ` Fam Zheng
2017-12-29 17:48 ` [Qemu-devel] [PATCH v3 06/42] sdhci: refactor common sysbus/pci realize() into sdhci_realizefn() Philippe Mathieu-Daudé
2018-01-03 7:52 ` Fam Zheng
2018-01-03 10:08 ` Philippe Mathieu-Daudé
2017-12-29 17:48 ` [Qemu-devel] [PATCH v3 07/42] sdhci: refactor common sysbus/pci unrealize() into sdhci_unrealizefn() Philippe Mathieu-Daudé
2018-01-03 7:56 ` Fam Zheng
2018-01-03 10:10 ` Philippe Mathieu-Daudé
2018-01-03 10:41 ` Philippe Mathieu-Daudé
2017-12-29 17:48 ` [Qemu-devel] [PATCH v3 08/42] sdhci: use qemu_log_mask(UNIMP) instead of fprintf() Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 09/42] sdhci: convert the DPRINT() calls into trace events Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 10/42] sdhci: add a GPIO for the 'access control' LED Philippe Mathieu-Daudé
2018-01-03 0:10 ` Alistair Francis
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 11/42] sdhci: move MASK_TRNMOD with other SDHC_TRN* defines in "sd-internal.h" Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 12/42] sdhci: use FIELD_DP32() macro for the WRITE_PROTECT flag Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 13/42] sdhci: rename the SDHC_CAPAB register Philippe Mathieu-Daudé
2018-01-03 0:12 ` Alistair Francis
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 14/42] sdhci: fix CAPAB/MAXCURR registers, both are 64bit and read-only Philippe Mathieu-Daudé
2018-01-03 0:12 ` Alistair Francis
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 15/42] sdhci: Implement write method of ACMD12ERRSTS register Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 16/42] sdhci: use deposit64() on admasysaddr Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 17/42] sdhci: add a "dma-memory" property Philippe Mathieu-Daudé
2017-12-29 17:49 ` Philippe Mathieu-Daudé [this message]
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 19/42] sdhci: add basic Spec v1 capabilities Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 20/42] sdhci: add max-block-length capability (Spec v1) Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 22/42] sdhci: add DMA and 64-bit capabilities (Spec v2) Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 23/42] sdhci: default to Spec v2 Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 24/42] sdhci: add a 'dma' shortcut property Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 26/42] sdhci: Fix 64-bit ADMA2 Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 27/42] hw/arm/exynos4210: implement SDHCI Spec v2 Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 28/42] hw/arm/xilinx_zynq: " Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 29/42] sdhci: add qtest to check the SD Spec version Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 30/42] sdhci: check Spec v2 capabilities qtest Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 32/42] sdhci: rename the hostctl1 register Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 33/42] hw/arm/bcm2835_peripherals: implement SDHCI Spec v3 Philippe Mathieu-Daudé
2018-01-09 0:24 ` Andrew Baumann
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 34/42] hw/arm/fsl-imx6: " Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 35/42] hw/arm/xilinx_zynqmp: " Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 36/42] sdhci: check Spec v3 capabilities qtest Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 37/42] sdhci: remove the deprecated 'capareg' property Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 38/42] sdhci: add check_capab_readonly() qtest Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 39/42] sdhci: add a check_capab_baseclock() qtest Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 40/42] sdhci: add a check_capab_sdma() qtest Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 41/42] sdhci: add a check_capab_v3() qtest Philippe Mathieu-Daudé
2017-12-29 17:49 ` [Qemu-devel] [PATCH v3 42/42] sdhci: add Spec v4.2 register definitions Philippe Mathieu-Daudé
2018-01-03 0:15 ` [Qemu-devel] [PATCH v3 00/42] SDHCI: housekeeping, add a qtest and fix few issues Alistair Francis
2018-01-03 1:08 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171229174933.1781-19-f4bug@amsat.org \
--to=f4bug@amsat.org \
--cc=alistair.francis@xilinx.com \
--cc=andrew.smirnov@gmail.com \
--cc=crosthwaite.peter@gmail.com \
--cc=edgar.iglesias@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).