[Qemu-devel] [PATCH v3 00/11] i.MX FEC changes

[Andrey Smirnov <andrew.smirnov@gmail.com>]

Hi everyone,

This patchset is v3 of a spin-off from original i.MX7 support submission
found here [1], containing all of the patchest that are more or less
agreed upon and are ready (hopefully!) for inclusion.

Changes since [v2]:

	- All SD related patches are dropped from this series (to be
          re-submitted once Philippe's work lands upstream). Note that
          "Implement write method of ACMD12ERRSTS register" has been
          incorporated into Philippe's submission

	- Collected Reviewed-by for patch 2 from Philippe

Changes since [v1]:

	- Collected Reviewed-by tags from Peter

	- Implemented forgotten feedback from Peter for
	  "sdhci: Add i.MX specific subtype of SDHCI"

	- "imx_fec: Move Tx frame buffer away from the stack" sent out
          properly (fingers crossed)

	- Added trivial patch to swith i.MX6 over to TYPE_IMX_USDHC

	- Added "sd: Check for READ_MULTIPLE_BLOCK size limit
          violation first" to address a small problem I was seeing
          when tesiting SD against latest vanilla kernel

Changes since [1]:

	- Rx buffer in FEC was moved from stack to heap to allow
          worry-free expansion to 16K limit.

 	- Added more comments explaining rather convoluted bit-moving
          in eSHDC emuation code

	- Triple Tx ring DMA "VMState" code was changed to follow
          Peter's recommendations (avoiding the need to incrememnt the
          version_id)

	- FSL_IMX25_FEC_SIZE is used as a size of FEC's register file

	- Removed leftover code from "imx_fec: Change queue flushing
          heuristics"

[v2] https://lists.gnu.org/archive/html/qemu-arm/2017-12/msg00175.html
[v1] https://lists.gnu.org/archive/html/qemu-arm/2017-12/msg00085.html
[1]  https://lists.gnu.org/archive/html/qemu-arm/2017-11/msg00045.html


Andrey Smirnov (11):
  imx_fec: Do not link to netdev
  imx_fec: Refactor imx_eth_enable_rx()
  imx_fec: Change queue flushing heuristics
  imx_fec: Move Tx frame buffer away from the stack
  imx_fec: Use ENET_FTRL to determine truncation length
  imx_fec: Use MIN instead of explicit ternary operator
  imx_fec: Emulate SHIFT16 in ENETx_RACC
  imx_fec: Add support for multiple Tx DMA rings
  imx_fec: Use correct length for packet size
  imx_fec: Fix a typo in imx_enet_receive()
  imx_fec: Reserve full FSL_IMX25_FEC_SIZE page for the register file

 hw/arm/fsl-imx6.c          |   1 +
 hw/net/imx_fec.c           | 210 +++++++++++++++++++++++++++++++++++----------
 include/hw/arm/fsl-imx25.h |   1 -
 include/hw/net/imx_fec.h   |  27 +++++-
 4 files changed, 188 insertions(+), 51 deletions(-)

-- 
2.14.3