[Qemu-devel] [PATCH v2 08/25] sdcard: use the registerfields API to access the OCR register

["Philippe Mathieu-Daudé" <f4bug@amsat.org>]

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/sd/sd.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 7d43ab072b..1f209b8199 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -32,6 +32,7 @@
 #include "qemu/osdep.h"
 #include "hw/qdev.h"
 #include "hw/hw.h"
+#include "hw/registerfields.h"
 #include "sysemu/block-backend.h"
 #include "hw/sd/sd.h"
 #include "hw/sd/sdcard_legacy.h"
@@ -53,8 +54,6 @@ do { fprintf(stderr, "SD: " fmt , ## __VA_ARGS__); } while (0)
 #endif
 
 #define ACMD41_ENQUIRY_MASK     0x00ffffff
-#define OCR_POWER_UP            0x80000000
-#define OCR_POWER_DELAY_NS      500000 /* 0.5ms */
 
 #define SDCARD_CMD_MAX 64
 
@@ -293,6 +292,10 @@ static uint16_t sd_crc16(void *message, size_t width)
     return shift_reg;
 }
 
+FIELD(OCR, CARD_POWER_UP,              31, 1);
+
+#define OCR_POWER_DELAY_NS      500000 /* 0.5ms */
+
 static void sd_reset_ocr(SDState *sd)
 {
     /* All voltages OK, Standard Capacity SD Memory Card, not yet powered up */
@@ -303,9 +306,10 @@ static void sd_ocr_powerup(void *opaque)
 {
     SDState *sd = opaque;
 
-    /* Set powered up bit in OCR */
-    assert(!(sd->ocr & OCR_POWER_UP));
-    sd->ocr |= OCR_POWER_UP;
+    assert(!FIELD_EX32(sd->ocr, OCR, CARD_POWER_UP));
+
+    /* card power-up OK */
+    sd->ocr = FIELD_DP32(sd->ocr, OCR, CARD_POWER_UP, 1);
 }
 
 static void sd_reset_scr(SDState *sd)
@@ -594,7 +598,7 @@ static bool sd_ocr_vmstate_needed(void *opaque)
     SDState *sd = opaque;
 
     /* Include the OCR state (and timer) if it is not yet powered up */
-    return !(sd->ocr & OCR_POWER_UP);
+    return !FIELD_EX32(sd->ocr, OCR, CARD_POWER_UP);
 }
 
 static const VMStateDescription sd_ocr_vmstate = {
@@ -1494,7 +1498,7 @@ static sd_rsp_type_t sd_app_command(SDState *sd,
              * UEFI, which sends an initial enquiry ACMD41, but
              * assumes that the card is in ready state as soon as it
              * sees the power up bit set. */
-            if (!(sd->ocr & OCR_POWER_UP)) {
+            if (!FIELD_EX32(sd->ocr, OCR, CARD_POWER_UP)) {
                 if ((req.arg & ACMD41_ENQUIRY_MASK) != 0) {
                     timer_del(sd->ocr_power_timer);
                     sd_ocr_powerup(sd);
-- 
2.15.1