* [Qemu-devel] [PATCH v7 01/20] block: Add .bdrv_co_block_status() callback
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 02/20] block: Switch passthrough drivers to .bdrv_co_block_status() Eric Blake
` (20 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, famz, jcody, qemu-block, vsementsov, Stefan Hajnoczi,
Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Now that the block layer exposes byte-based allocation,
it's time to tackle the drivers. Add a new callback that operates
on as small as byte boundaries. Subsequent patches will then update
individual drivers, then finally remove .bdrv_co_get_block_status().
The new code also passes through the 'want_zero' hint, which will
allow subsequent patches to further optimize callers that only care
about how much of the image is allocated (want_zero is false),
rather than full details about runs of zeroes and which offsets the
allocation actually maps to (want_zero is true). As part of this
effort, fix another part of the documentation: the claim in commit
4c41cb4 that BDRV_BLOCK_ALLOCATED is short for 'DATA || ZERO' is a
lie at the block layer (see commit e88ae2264), even though it is
how the bit is computed from the driver layer. After all, there
are intentionally cases where we return ZERO but not ALLOCATED at
the block layer, when we know that a read sees zero because the
backing file is too short. Note that the driver interface is thus
slightly different than the public interface with regards to which
bits will be set, and what guarantees are provided on input.
We also add an assertion that any driver using the new callback will
make progress (the only time pnum will be 0 is if the block layer
already handled an out-of-bounds request, or if there is an error);
the old driver interface did not provide this guarantee, which
could lead to some inf-loops in drastic corner-case failures.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v7: add R-b
v6: drop now-useless rounding of mid-sector end-of-file hole [Kevin],
better documentation of 'want_zero' [Kevin]
v5: rebase to master, typo fix, document more block layer guarantees
v4: rebase to master
v3: no change
v2: improve alignment handling, ensure all iotests still pass
---
include/block/block.h | 14 +++++++-------
include/block/block_int.h | 20 +++++++++++++++-----
block/io.c | 28 +++++++++++++++++++---------
3 files changed, 41 insertions(+), 21 deletions(-)
diff --git a/include/block/block.h b/include/block/block.h
index 9b12774ddf..179901c9f4 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -128,19 +128,19 @@ typedef struct HDGeometry {
* BDRV_BLOCK_ZERO: offset reads as zero
* BDRV_BLOCK_OFFSET_VALID: an associated offset exists for accessing raw data
* BDRV_BLOCK_ALLOCATED: the content of the block is determined by this
- * layer (short for DATA || ZERO), set by block layer
- * BDRV_BLOCK_EOF: the returned pnum covers through end of file for this layer
+ * layer rather than any backing, set by block layer
+ * BDRV_BLOCK_EOF: the returned pnum covers through end of file for this
+ * layer, set by block layer
*
* Internal flag:
* BDRV_BLOCK_RAW: for use by passthrough drivers, such as raw, to request
* that the block layer recompute the answer from the returned
* BDS; must be accompanied by just BDRV_BLOCK_OFFSET_VALID.
*
- * If BDRV_BLOCK_OFFSET_VALID is set, bits 9-62 (BDRV_BLOCK_OFFSET_MASK) of
- * the return value (old interface) or the entire map parameter (new
- * interface) represent the offset in the returned BDS that is allocated for
- * the corresponding raw data. However, whether that offset actually
- * contains data also depends on BDRV_BLOCK_DATA, as follows:
+ * If BDRV_BLOCK_OFFSET_VALID is set, the map parameter represents the
+ * host offset within the returned BDS that is allocated for the
+ * corresponding raw guest data. However, whether that offset
+ * actually contains data also depends on BDRV_BLOCK_DATA, as follows:
*
* DATA ZERO OFFSET_VALID
* t t t sectors read as zero, returned file is zero at offset
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 29cafa4236..4c9777b55d 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -204,15 +204,25 @@ struct BlockDriver {
/*
* Building block for bdrv_block_status[_above] and
* bdrv_is_allocated[_above]. The driver should answer only
- * according to the current layer, and should not set
- * BDRV_BLOCK_ALLOCATED, but may set BDRV_BLOCK_RAW. See block.h
- * for the meaning of _DATA, _ZERO, and _OFFSET_VALID. The block
- * layer guarantees input aligned to request_alignment, as well as
- * non-NULL pnum and file.
+ * according to the current layer, and should only need to set
+ * BDRV_BLOCK_DATA, BDRV_BLOCK_ZERO, BDRV_BLOCK_OFFSET_VALID,
+ * and/or BDRV_BLOCK_RAW; if the current layer defers to a backing
+ * layer, the result should be 0 (and not BDRV_BLOCK_ZERO). See
+ * block.h for the overall meaning of the bits. As a hint, the
+ * flag want_zero is true if the caller cares more about precise
+ * mappings (favor accurate _OFFSET_VALID/_ZERO) or false for
+ * overall allocation (favor larger *pnum, perhaps by reporting
+ * _DATA instead of _ZERO). The block layer guarantees input
+ * clamped to bdrv_getlength() and aligned to request_alignment,
+ * as well as non-NULL pnum, map, and file; in turn, the driver
+ * must return an error or set pnum to an aligned non-zero value.
*/
int64_t coroutine_fn (*bdrv_co_get_block_status)(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, int *pnum,
BlockDriverState **file);
+ int coroutine_fn (*bdrv_co_block_status)(BlockDriverState *bs,
+ bool want_zero, int64_t offset, int64_t bytes, int64_t *pnum,
+ int64_t *map, BlockDriverState **file);
/*
* Invalidate any cached meta-data.
diff --git a/block/io.c b/block/io.c
index 7ea402352e..9a697f3b20 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1899,10 +1899,10 @@ int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs,
* Drivers not implementing the functionality are assumed to not support
* backing files, hence all their sectors are reported as allocated.
*
- * If 'want_zero' is true, the caller is querying for mapping purposes,
- * and the result should include BDRV_BLOCK_OFFSET_VALID and
- * BDRV_BLOCK_ZERO where possible; otherwise, the result may omit those
- * bits particularly if it allows for a larger value in 'pnum'.
+ * If 'want_zero' is true, the caller is querying for mapping
+ * purposes, with a focus on valid BDRV_BLOCK_OFFSET_VALID, _DATA, and
+ * _ZERO where possible; otherwise, the result favors larger 'pnum',
+ * with a focus on accurate BDRV_BLOCK_ALLOCATED.
*
* If 'offset' is beyond the end of the disk image the return value is
* BDRV_BLOCK_EOF and 'pnum' is set to 0.
@@ -1959,7 +1959,7 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
/* Must be non-NULL or bdrv_getlength() would have failed */
assert(bs->drv);
- if (!bs->drv->bdrv_co_get_block_status) {
+ if (!bs->drv->bdrv_co_get_block_status && !bs->drv->bdrv_co_block_status) {
*pnum = bytes;
ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
if (offset + bytes == total_size) {
@@ -1976,13 +1976,14 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
bdrv_inc_in_flight(bs);
/* Round out to request_alignment boundaries */
- /* TODO: until we have a byte-based driver callback, we also have to
- * round out to sectors, even if that is bigger than request_alignment */
- align = MAX(bs->bl.request_alignment, BDRV_SECTOR_SIZE);
+ align = bs->bl.request_alignment;
+ if (bs->drv->bdrv_co_get_block_status && align < BDRV_SECTOR_SIZE) {
+ align = BDRV_SECTOR_SIZE;
+ }
aligned_offset = QEMU_ALIGN_DOWN(offset, align);
aligned_bytes = ROUND_UP(offset + bytes, align) - aligned_offset;
- {
+ if (bs->drv->bdrv_co_get_block_status) {
int count; /* sectors */
int64_t longret;
@@ -2007,6 +2008,15 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
}
ret = longret & ~BDRV_BLOCK_OFFSET_MASK;
*pnum = count * BDRV_SECTOR_SIZE;
+ } else {
+ ret = bs->drv->bdrv_co_block_status(bs, want_zero, aligned_offset,
+ aligned_bytes, pnum, &local_map,
+ &local_file);
+ if (ret < 0) {
+ *pnum = 0;
+ goto out;
+ }
+ assert(*pnum); /* The block driver must make progress */
}
/*
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 02/20] block: Switch passthrough drivers to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 01/20] block: Add .bdrv_co_block_status() callback Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 03/20] file-posix: Switch " Eric Blake
` (19 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, famz, jcody, qemu-block, vsementsov, Max Reitz,
Stefan Hajnoczi
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the generic helpers, and all passthrough clients
(blkdebug, commit, mirror, throttle) accordingly.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v6-v7: no change
v5: rebase to master
v4: rebase to interface tweak
v3: rebase to addition of throttle driver
v2: rebase to master, retitle while merging blkdebug, commit, and mirror
---
include/block/block_int.h | 28 ++++++++++++++++------------
block/io.c | 36 ++++++++++++++++++++----------------
block/blkdebug.c | 20 +++++++++++---------
block/commit.c | 2 +-
block/mirror.c | 2 +-
block/throttle.c | 2 +-
6 files changed, 50 insertions(+), 40 deletions(-)
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 4c9777b55d..d4509a2711 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -1034,23 +1034,27 @@ void bdrv_format_default_perms(BlockDriverState *bs, BdrvChild *c,
uint64_t *nperm, uint64_t *nshared);
/*
- * Default implementation for drivers to pass bdrv_co_get_block_status() to
+ * Default implementation for drivers to pass bdrv_co_block_status() to
* their file.
*/
-int64_t coroutine_fn bdrv_co_get_block_status_from_file(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors,
- int *pnum,
- BlockDriverState **file);
+int coroutine_fn bdrv_co_block_status_from_file(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset,
+ int64_t bytes,
+ int64_t *pnum,
+ int64_t *map,
+ BlockDriverState **file);
/*
- * Default implementation for drivers to pass bdrv_co_get_block_status() to
+ * Default implementation for drivers to pass bdrv_co_block_status() to
* their backing file.
*/
-int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors,
- int *pnum,
- BlockDriverState **file);
+int coroutine_fn bdrv_co_block_status_from_backing(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset,
+ int64_t bytes,
+ int64_t *pnum,
+ int64_t *map,
+ BlockDriverState **file);
const char *bdrv_get_parent_name(const BlockDriverState *bs);
void blk_dev_change_media_cb(BlockBackend *blk, bool load, Error **errp);
bool blk_dev_has_removable_media(BlockBackend *blk);
diff --git a/block/io.c b/block/io.c
index 9a697f3b20..087cb89b86 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1868,30 +1868,34 @@ typedef struct BdrvCoBlockStatusData {
bool done;
} BdrvCoBlockStatusData;
-int64_t coroutine_fn bdrv_co_get_block_status_from_file(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors,
- int *pnum,
- BlockDriverState **file)
+int coroutine_fn bdrv_co_block_status_from_file(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset,
+ int64_t bytes,
+ int64_t *pnum,
+ int64_t *map,
+ BlockDriverState **file)
{
assert(bs->file && bs->file->bs);
- *pnum = nb_sectors;
+ *pnum = bytes;
+ *map = offset;
*file = bs->file->bs;
- return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID |
- (sector_num << BDRV_SECTOR_BITS);
+ return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID;
}
-int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors,
- int *pnum,
- BlockDriverState **file)
+int coroutine_fn bdrv_co_block_status_from_backing(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset,
+ int64_t bytes,
+ int64_t *pnum,
+ int64_t *map,
+ BlockDriverState **file)
{
assert(bs->backing && bs->backing->bs);
- *pnum = nb_sectors;
+ *pnum = bytes;
+ *map = offset;
*file = bs->backing->bs;
- return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID |
- (sector_num << BDRV_SECTOR_BITS);
+ return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID;
}
/*
diff --git a/block/blkdebug.c b/block/blkdebug.c
index e21669979d..82c30357f8 100644
--- a/block/blkdebug.c
+++ b/block/blkdebug.c
@@ -627,15 +627,17 @@ static int coroutine_fn blkdebug_co_pdiscard(BlockDriverState *bs,
return bdrv_co_pdiscard(bs->file->bs, offset, bytes);
}
-static int64_t coroutine_fn blkdebug_co_get_block_status(
- BlockDriverState *bs, int64_t sector_num, int nb_sectors, int *pnum,
- BlockDriverState **file)
+static int coroutine_fn blkdebug_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset,
+ int64_t bytes,
+ int64_t *pnum,
+ int64_t *map,
+ BlockDriverState **file)
{
- assert(QEMU_IS_ALIGNED(sector_num | nb_sectors,
- DIV_ROUND_UP(bs->bl.request_alignment,
- BDRV_SECTOR_SIZE)));
- return bdrv_co_get_block_status_from_file(bs, sector_num, nb_sectors,
- pnum, file);
+ assert(QEMU_IS_ALIGNED(offset | bytes, bs->bl.request_alignment));
+ return bdrv_co_block_status_from_file(bs, want_zero, offset, bytes,
+ pnum, map, file);
}
static void blkdebug_close(BlockDriverState *bs)
@@ -907,7 +909,7 @@ static BlockDriver bdrv_blkdebug = {
.bdrv_co_flush_to_disk = blkdebug_co_flush,
.bdrv_co_pwrite_zeroes = blkdebug_co_pwrite_zeroes,
.bdrv_co_pdiscard = blkdebug_co_pdiscard,
- .bdrv_co_get_block_status = blkdebug_co_get_block_status,
+ .bdrv_co_block_status = blkdebug_co_block_status,
.bdrv_debug_event = blkdebug_debug_event,
.bdrv_debug_breakpoint = blkdebug_debug_breakpoint,
diff --git a/block/commit.c b/block/commit.c
index bb6c904704..1943c9c3e1 100644
--- a/block/commit.c
+++ b/block/commit.c
@@ -265,7 +265,7 @@ static void bdrv_commit_top_child_perm(BlockDriverState *bs, BdrvChild *c,
static BlockDriver bdrv_commit_top = {
.format_name = "commit_top",
.bdrv_co_preadv = bdrv_commit_top_preadv,
- .bdrv_co_get_block_status = bdrv_co_get_block_status_from_backing,
+ .bdrv_co_block_status = bdrv_co_block_status_from_backing,
.bdrv_refresh_filename = bdrv_commit_top_refresh_filename,
.bdrv_close = bdrv_commit_top_close,
.bdrv_child_perm = bdrv_commit_top_child_perm,
diff --git a/block/mirror.c b/block/mirror.c
index c9badc1203..f5bf620942 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -1094,7 +1094,7 @@ static BlockDriver bdrv_mirror_top = {
.bdrv_co_pwrite_zeroes = bdrv_mirror_top_pwrite_zeroes,
.bdrv_co_pdiscard = bdrv_mirror_top_pdiscard,
.bdrv_co_flush = bdrv_mirror_top_flush,
- .bdrv_co_get_block_status = bdrv_co_get_block_status_from_backing,
+ .bdrv_co_block_status = bdrv_co_block_status_from_backing,
.bdrv_refresh_filename = bdrv_mirror_top_refresh_filename,
.bdrv_close = bdrv_mirror_top_close,
.bdrv_child_perm = bdrv_mirror_top_child_perm,
diff --git a/block/throttle.c b/block/throttle.c
index 833175ac77..d1324e7a9f 100644
--- a/block/throttle.c
+++ b/block/throttle.c
@@ -239,7 +239,7 @@ static BlockDriver bdrv_throttle = {
.bdrv_reopen_prepare = throttle_reopen_prepare,
.bdrv_reopen_commit = throttle_reopen_commit,
.bdrv_reopen_abort = throttle_reopen_abort,
- .bdrv_co_get_block_status = bdrv_co_get_block_status_from_file,
+ .bdrv_co_block_status = bdrv_co_block_status_from_file,
.bdrv_co_drain_begin = throttle_co_drain_begin,
.bdrv_co_drain_end = throttle_co_drain_end,
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 03/20] file-posix: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 01/20] block: Add .bdrv_co_block_status() callback Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 02/20] block: Switch passthrough drivers to .bdrv_co_block_status() Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 04/20] gluster: " Eric Blake
` (18 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, famz, jcody, qemu-block, vsementsov, Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the file protocol driver accordingly.
In want_zero mode, we continue to report fine-grained hole
information (the caller wants as much mapping detail as possible);
but when not in that mode, the caller prefers larger *pnum and
merely cares about what offsets are allocated at this layer, rather
than where the holes live. Since holes still read as zeroes at
this layer (rather than deferring to a backing layer), we can take
the shortcut of skipping lseek(), and merely state that all bytes
are allocated.
We can also drop redundant bounds checks that are already
guaranteed by the block layer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v6-v7: no change
v5: drop redundant code
v4: tweak commit message [Fam], rebase to interface tweak
v3: no change
v2: tweak comment, add mapping support
---
block/file-posix.c | 62 +++++++++++++++++++++++++-----------------------------
1 file changed, 29 insertions(+), 33 deletions(-)
diff --git a/block/file-posix.c b/block/file-posix.c
index 36ee89e940..e847c7cdd9 100644
--- a/block/file-posix.c
+++ b/block/file-posix.c
@@ -2128,25 +2128,24 @@ static int find_allocation(BlockDriverState *bs, off_t start,
}
/*
- * Returns the allocation status of the specified sectors.
+ * Returns the allocation status of the specified offset.
*
- * If 'sector_num' is beyond the end of the disk image the return value is 0
- * and 'pnum' is set to 0.
+ * The block layer guarantees 'offset' and 'bytes' are within bounds.
*
- * 'pnum' is set to the number of sectors (including and immediately following
- * the specified sector) that are known to be in the same
+ * 'pnum' is set to the number of bytes (including and immediately following
+ * the specified offset) that are known to be in the same
* allocated/unallocated state.
*
- * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
- * beyond the end of the disk image it will be clamped.
+ * 'bytes' is the max value 'pnum' should be set to.
*/
-static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors, int *pnum,
- BlockDriverState **file)
+static int coroutine_fn raw_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset,
+ int64_t bytes, int64_t *pnum,
+ int64_t *map,
+ BlockDriverState **file)
{
- off_t start, data = 0, hole = 0;
- int64_t total_size;
+ off_t data = 0, hole = 0;
int ret;
ret = fd_open(bs);
@@ -2154,39 +2153,36 @@ static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
return ret;
}
- start = sector_num * BDRV_SECTOR_SIZE;
- total_size = bdrv_getlength(bs);
- if (total_size < 0) {
- return total_size;
- } else if (start >= total_size) {
- *pnum = 0;
- return 0;
- } else if (start + nb_sectors * BDRV_SECTOR_SIZE > total_size) {
- nb_sectors = DIV_ROUND_UP(total_size - start, BDRV_SECTOR_SIZE);
+ if (!want_zero) {
+ *pnum = bytes;
+ *map = offset;
+ *file = bs;
+ return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
}
- ret = find_allocation(bs, start, &data, &hole);
+ ret = find_allocation(bs, offset, &data, &hole);
if (ret == -ENXIO) {
/* Trailing hole */
- *pnum = nb_sectors;
+ *pnum = bytes;
ret = BDRV_BLOCK_ZERO;
} else if (ret < 0) {
/* No info available, so pretend there are no holes */
- *pnum = nb_sectors;
+ *pnum = bytes;
ret = BDRV_BLOCK_DATA;
- } else if (data == start) {
- /* On a data extent, compute sectors to the end of the extent,
+ } else if (data == offset) {
+ /* On a data extent, compute bytes to the end of the extent,
* possibly including a partial sector at EOF. */
- *pnum = MIN(nb_sectors, DIV_ROUND_UP(hole - start, BDRV_SECTOR_SIZE));
+ *pnum = MIN(bytes, hole - offset);
ret = BDRV_BLOCK_DATA;
} else {
- /* On a hole, compute sectors to the beginning of the next extent. */
- assert(hole == start);
- *pnum = MIN(nb_sectors, (data - start) / BDRV_SECTOR_SIZE);
+ /* On a hole, compute bytes to the beginning of the next extent. */
+ assert(hole == offset);
+ *pnum = MIN(bytes, data - offset);
ret = BDRV_BLOCK_ZERO;
}
+ *map = offset;
*file = bs;
- return ret | BDRV_BLOCK_OFFSET_VALID | start;
+ return ret | BDRV_BLOCK_OFFSET_VALID;
}
static coroutine_fn BlockAIOCB *raw_aio_pdiscard(BlockDriverState *bs,
@@ -2280,7 +2276,7 @@ BlockDriver bdrv_file = {
.bdrv_close = raw_close,
.bdrv_create = raw_create,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
- .bdrv_co_get_block_status = raw_co_get_block_status,
+ .bdrv_co_block_status = raw_co_block_status,
.bdrv_co_pwrite_zeroes = raw_co_pwrite_zeroes,
.bdrv_co_preadv = raw_co_preadv,
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 04/20] gluster: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (2 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 03/20] file-posix: Switch " Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 05/20] iscsi: Switch cluster_sectors to byte-based Eric Blake
` (17 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, famz, jcody, qemu-block, vsementsov, Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the gluster driver accordingly.
In want_zero mode, we continue to report fine-grained hole
information (the caller wants as much mapping detail as possible);
but when not in that mode, the caller prefers larger *pnum and
merely cares about what offsets are allocated at this layer, rather
than where the holes live. Since holes still read as zeroes at
this layer (rather than deferring to a backing layer), we can take
the shortcut of skipping find_allocation(), and merely state that
all bytes are allocated.
We can also drop redundant bounds checks that are already
guaranteed by the block layer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v6-v7: no change
v5: drop redundant code
v4: tweak commit message [Fam], rebase to interface tweak
v3: no change
v2: tweak comments [Prasanna], add mapping, drop R-b
---
block/gluster.c | 70 ++++++++++++++++++++++++++++-----------------------------
1 file changed, 34 insertions(+), 36 deletions(-)
diff --git a/block/gluster.c b/block/gluster.c
index 0f4265a3a4..6388ced82e 100644
--- a/block/gluster.c
+++ b/block/gluster.c
@@ -1349,68 +1349,66 @@ exit:
}
/*
- * Returns the allocation status of the specified sectors.
+ * Returns the allocation status of the specified offset.
*
- * If 'sector_num' is beyond the end of the disk image the return value is 0
- * and 'pnum' is set to 0.
+ * The block layer guarantees 'offset' and 'bytes' are within bounds.
*
- * 'pnum' is set to the number of sectors (including and immediately following
- * the specified sector) that are known to be in the same
+ * 'pnum' is set to the number of bytes (including and immediately following
+ * the specified offset) that are known to be in the same
* allocated/unallocated state.
*
- * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
- * beyond the end of the disk image it will be clamped.
+ * 'bytes' is the max value 'pnum' should be set to.
*
- * (Based on raw_co_get_block_status() from file-posix.c.)
+ * (Based on raw_co_block_status() from file-posix.c.)
*/
-static int64_t coroutine_fn qemu_gluster_co_get_block_status(
- BlockDriverState *bs, int64_t sector_num, int nb_sectors, int *pnum,
- BlockDriverState **file)
+static int coroutine_fn qemu_gluster_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset,
+ int64_t bytes,
+ int64_t *pnum,
+ int64_t *map,
+ BlockDriverState **file)
{
BDRVGlusterState *s = bs->opaque;
- off_t start, data = 0, hole = 0;
- int64_t total_size;
+ off_t data = 0, hole = 0;
int ret = -EINVAL;
if (!s->fd) {
return ret;
}
- start = sector_num * BDRV_SECTOR_SIZE;
- total_size = bdrv_getlength(bs);
- if (total_size < 0) {
- return total_size;
- } else if (start >= total_size) {
- *pnum = 0;
- return 0;
- } else if (start + nb_sectors * BDRV_SECTOR_SIZE > total_size) {
- nb_sectors = DIV_ROUND_UP(total_size - start, BDRV_SECTOR_SIZE);
+ if (!want_zero) {
+ *pnum = bytes;
+ *map = offset;
+ *file = bs;
+ return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
}
- ret = find_allocation(bs, start, &data, &hole);
+ ret = find_allocation(bs, offset, &data, &hole);
if (ret == -ENXIO) {
/* Trailing hole */
- *pnum = nb_sectors;
+ *pnum = bytes;
ret = BDRV_BLOCK_ZERO;
} else if (ret < 0) {
/* No info available, so pretend there are no holes */
- *pnum = nb_sectors;
+ *pnum = bytes;
ret = BDRV_BLOCK_DATA;
- } else if (data == start) {
- /* On a data extent, compute sectors to the end of the extent,
+ } else if (data == offset) {
+ /* On a data extent, compute bytes to the end of the extent,
* possibly including a partial sector at EOF. */
- *pnum = MIN(nb_sectors, DIV_ROUND_UP(hole - start, BDRV_SECTOR_SIZE));
+ *pnum = MIN(bytes, hole - offset);
ret = BDRV_BLOCK_DATA;
} else {
- /* On a hole, compute sectors to the beginning of the next extent. */
- assert(hole == start);
- *pnum = MIN(nb_sectors, (data - start) / BDRV_SECTOR_SIZE);
+ /* On a hole, compute bytes to the beginning of the next extent. */
+ assert(hole == offset);
+ *pnum = MIN(bytes, data - offset);
ret = BDRV_BLOCK_ZERO;
}
+ *map = offset;
*file = bs;
- return ret | BDRV_BLOCK_OFFSET_VALID | start;
+ return ret | BDRV_BLOCK_OFFSET_VALID;
}
@@ -1438,7 +1436,7 @@ static BlockDriver bdrv_gluster = {
#ifdef CONFIG_GLUSTERFS_ZEROFILL
.bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes,
#endif
- .bdrv_co_get_block_status = qemu_gluster_co_get_block_status,
+ .bdrv_co_block_status = qemu_gluster_co_block_status,
.create_opts = &qemu_gluster_create_opts,
};
@@ -1466,7 +1464,7 @@ static BlockDriver bdrv_gluster_tcp = {
#ifdef CONFIG_GLUSTERFS_ZEROFILL
.bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes,
#endif
- .bdrv_co_get_block_status = qemu_gluster_co_get_block_status,
+ .bdrv_co_block_status = qemu_gluster_co_block_status,
.create_opts = &qemu_gluster_create_opts,
};
@@ -1494,7 +1492,7 @@ static BlockDriver bdrv_gluster_unix = {
#ifdef CONFIG_GLUSTERFS_ZEROFILL
.bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes,
#endif
- .bdrv_co_get_block_status = qemu_gluster_co_get_block_status,
+ .bdrv_co_block_status = qemu_gluster_co_block_status,
.create_opts = &qemu_gluster_create_opts,
};
@@ -1528,7 +1526,7 @@ static BlockDriver bdrv_gluster_rdma = {
#ifdef CONFIG_GLUSTERFS_ZEROFILL
.bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes,
#endif
- .bdrv_co_get_block_status = qemu_gluster_co_get_block_status,
+ .bdrv_co_block_status = qemu_gluster_co_block_status,
.create_opts = &qemu_gluster_create_opts,
};
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 05/20] iscsi: Switch cluster_sectors to byte-based
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (3 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 04/20] gluster: " Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 06/20] iscsi: Switch iscsi_allocmap_update() " Eric Blake
` (16 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, famz, jcody, qemu-block, vsementsov, Ronnie Sahlberg,
Paolo Bonzini, Peter Lieven, Max Reitz
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert all uses of
the cluster size in sectors, along with adding assertions that we
are not dividing by zero.
Improve some comment grammar while in the area.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v2-v7: no change
---
block/iscsi.c | 56 +++++++++++++++++++++++++++++++++++---------------------
1 file changed, 35 insertions(+), 21 deletions(-)
diff --git a/block/iscsi.c b/block/iscsi.c
index 5c0a9e55b6..7b03da54ee 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -84,7 +84,7 @@ typedef struct IscsiLun {
unsigned long *allocmap;
unsigned long *allocmap_valid;
long allocmap_size;
- int cluster_sectors;
+ int cluster_size;
bool use_16_for_rw;
bool write_protected;
bool lbpme;
@@ -428,9 +428,10 @@ static int iscsi_allocmap_init(IscsiLun *iscsilun, int open_flags)
{
iscsi_allocmap_free(iscsilun);
+ assert(iscsilun->cluster_size);
iscsilun->allocmap_size =
- DIV_ROUND_UP(sector_lun2qemu(iscsilun->num_blocks, iscsilun),
- iscsilun->cluster_sectors);
+ DIV_ROUND_UP(iscsilun->num_blocks * iscsilun->block_size,
+ iscsilun->cluster_size);
iscsilun->allocmap = bitmap_try_new(iscsilun->allocmap_size);
if (!iscsilun->allocmap) {
@@ -438,7 +439,7 @@ static int iscsi_allocmap_init(IscsiLun *iscsilun, int open_flags)
}
if (open_flags & BDRV_O_NOCACHE) {
- /* in case that cache.direct = on all allocmap entries are
+ /* when cache.direct = on all allocmap entries are
* treated as invalid to force a relookup of the block
* status on every read request */
return 0;
@@ -459,17 +460,19 @@ iscsi_allocmap_update(IscsiLun *iscsilun, int64_t sector_num,
int nb_sectors, bool allocated, bool valid)
{
int64_t cl_num_expanded, nb_cls_expanded, cl_num_shrunk, nb_cls_shrunk;
+ int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
if (iscsilun->allocmap == NULL) {
return;
}
/* expand to entirely contain all affected clusters */
- cl_num_expanded = sector_num / iscsilun->cluster_sectors;
+ assert(cluster_sectors);
+ cl_num_expanded = sector_num / cluster_sectors;
nb_cls_expanded = DIV_ROUND_UP(sector_num + nb_sectors,
- iscsilun->cluster_sectors) - cl_num_expanded;
+ cluster_sectors) - cl_num_expanded;
/* shrink to touch only completely contained clusters */
- cl_num_shrunk = DIV_ROUND_UP(sector_num, iscsilun->cluster_sectors);
- nb_cls_shrunk = (sector_num + nb_sectors) / iscsilun->cluster_sectors
+ cl_num_shrunk = DIV_ROUND_UP(sector_num, cluster_sectors);
+ nb_cls_shrunk = (sector_num + nb_sectors) / cluster_sectors
- cl_num_shrunk;
if (allocated) {
bitmap_set(iscsilun->allocmap, cl_num_expanded, nb_cls_expanded);
@@ -533,9 +536,12 @@ iscsi_allocmap_is_allocated(IscsiLun *iscsilun, int64_t sector_num,
if (iscsilun->allocmap == NULL) {
return true;
}
- size = DIV_ROUND_UP(sector_num + nb_sectors, iscsilun->cluster_sectors);
+ assert(iscsilun->cluster_size);
+ size = DIV_ROUND_UP(sector_num + nb_sectors,
+ iscsilun->cluster_size >> BDRV_SECTOR_BITS);
return !(find_next_bit(iscsilun->allocmap, size,
- sector_num / iscsilun->cluster_sectors) == size);
+ sector_num * BDRV_SECTOR_SIZE /
+ iscsilun->cluster_size) == size);
}
static inline bool iscsi_allocmap_is_valid(IscsiLun *iscsilun,
@@ -545,9 +551,12 @@ static inline bool iscsi_allocmap_is_valid(IscsiLun *iscsilun,
if (iscsilun->allocmap_valid == NULL) {
return false;
}
- size = DIV_ROUND_UP(sector_num + nb_sectors, iscsilun->cluster_sectors);
+ assert(iscsilun->cluster_size);
+ size = DIV_ROUND_UP(sector_num + nb_sectors,
+ iscsilun->cluster_size >> BDRV_SECTOR_BITS);
return (find_next_zero_bit(iscsilun->allocmap_valid, size,
- sector_num / iscsilun->cluster_sectors) == size);
+ sector_num * BDRV_SECTOR_SIZE /
+ iscsilun->cluster_size) == size);
}
static int coroutine_fn
@@ -790,16 +799,21 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
BlockDriverState *file;
/* check the block status from the beginning of the cluster
* containing the start sector */
- int64_t ret = iscsi_co_get_block_status(bs,
- sector_num - sector_num % iscsilun->cluster_sectors,
- BDRV_REQUEST_MAX_SECTORS, &pnum, &file);
+ int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
+ int head;
+ int64_t ret;
+
+ assert(cluster_sectors);
+ head = sector_num % cluster_sectors;
+ ret = iscsi_co_get_block_status(bs, sector_num - head,
+ BDRV_REQUEST_MAX_SECTORS, &pnum,
+ &file);
if (ret < 0) {
return ret;
}
/* if the whole request falls into an unallocated area we can avoid
- * to read and directly return zeroes instead */
- if (ret & BDRV_BLOCK_ZERO &&
- pnum >= nb_sectors + sector_num % iscsilun->cluster_sectors) {
+ * reading and directly return zeroes instead */
+ if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors + head) {
qemu_iovec_memset(iov, 0, 0x00, iov->size);
return 0;
}
@@ -1951,8 +1965,8 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
* reasonable size */
if (iscsilun->bl.opt_unmap_gran * iscsilun->block_size >= 4 * 1024 &&
iscsilun->bl.opt_unmap_gran * iscsilun->block_size <= 16 * 1024 * 1024) {
- iscsilun->cluster_sectors = (iscsilun->bl.opt_unmap_gran *
- iscsilun->block_size) >> BDRV_SECTOR_BITS;
+ iscsilun->cluster_size = iscsilun->bl.opt_unmap_gran *
+ iscsilun->block_size;
if (iscsilun->lbprz) {
ret = iscsi_allocmap_init(iscsilun, bs->open_flags);
}
@@ -2158,7 +2172,7 @@ static int iscsi_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
IscsiLun *iscsilun = bs->opaque;
bdi->unallocated_blocks_are_zero = iscsilun->lbprz;
bdi->can_write_zeroes_with_unmap = iscsilun->lbprz && iscsilun->lbp.lbpws;
- bdi->cluster_size = iscsilun->cluster_sectors * BDRV_SECTOR_SIZE;
+ bdi->cluster_size = iscsilun->cluster_size;
return 0;
}
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 06/20] iscsi: Switch iscsi_allocmap_update() to byte-based
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (4 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 05/20] iscsi: Switch cluster_sectors to byte-based Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-08 8:08 ` Fam Zheng
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 07/20] iscsi: Switch to .bdrv_co_block_status() Eric Blake
` (15 subsequent siblings)
21 siblings, 1 reply; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, famz, jcody, qemu-block, vsementsov, Ronnie Sahlberg,
Paolo Bonzini, Peter Lieven, Max Reitz
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert all uses of
the allocmap (no semantic change). Callers that already had bytes
available are simpler, and callers that now scale to bytes will be
easier to switch to byte-based in the future.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
---
v7: rebase to master, simple enough to keep ack
v3-v6: no change
v2: rebase to count/bytes rename
---
block/iscsi.c | 90 +++++++++++++++++++++++++++++------------------------------
1 file changed, 44 insertions(+), 46 deletions(-)
diff --git a/block/iscsi.c b/block/iscsi.c
index 7b03da54ee..a823cdcb0b 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -456,24 +456,22 @@ static int iscsi_allocmap_init(IscsiLun *iscsilun, int open_flags)
}
static void
-iscsi_allocmap_update(IscsiLun *iscsilun, int64_t sector_num,
- int nb_sectors, bool allocated, bool valid)
+iscsi_allocmap_update(IscsiLun *iscsilun, int64_t offset,
+ int64_t bytes, bool allocated, bool valid)
{
int64_t cl_num_expanded, nb_cls_expanded, cl_num_shrunk, nb_cls_shrunk;
- int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
if (iscsilun->allocmap == NULL) {
return;
}
/* expand to entirely contain all affected clusters */
- assert(cluster_sectors);
- cl_num_expanded = sector_num / cluster_sectors;
- nb_cls_expanded = DIV_ROUND_UP(sector_num + nb_sectors,
- cluster_sectors) - cl_num_expanded;
+ assert(iscsilun->cluster_size);
+ cl_num_expanded = offset / iscsilun->cluster_size;
+ nb_cls_expanded = DIV_ROUND_UP(offset + bytes,
+ iscsilun->cluster_size) - cl_num_expanded;
/* shrink to touch only completely contained clusters */
- cl_num_shrunk = DIV_ROUND_UP(sector_num, cluster_sectors);
- nb_cls_shrunk = (sector_num + nb_sectors) / cluster_sectors
- - cl_num_shrunk;
+ cl_num_shrunk = DIV_ROUND_UP(offset, iscsilun->cluster_size);
+ nb_cls_shrunk = (offset + bytes) / iscsilun->cluster_size - cl_num_shrunk;
if (allocated) {
bitmap_set(iscsilun->allocmap, cl_num_expanded, nb_cls_expanded);
} else {
@@ -496,26 +494,26 @@ iscsi_allocmap_update(IscsiLun *iscsilun, int64_t sector_num,
}
static void
-iscsi_allocmap_set_allocated(IscsiLun *iscsilun, int64_t sector_num,
- int nb_sectors)
+iscsi_allocmap_set_allocated(IscsiLun *iscsilun, int64_t offset,
+ int64_t bytes)
{
- iscsi_allocmap_update(iscsilun, sector_num, nb_sectors, true, true);
+ iscsi_allocmap_update(iscsilun, offset, bytes, true, true);
}
static void
-iscsi_allocmap_set_unallocated(IscsiLun *iscsilun, int64_t sector_num,
- int nb_sectors)
+iscsi_allocmap_set_unallocated(IscsiLun *iscsilun, int64_t offset,
+ int64_t bytes)
{
/* Note: if cache.direct=on the fifth argument to iscsi_allocmap_update
* is ignored, so this will in effect be an iscsi_allocmap_set_invalid.
*/
- iscsi_allocmap_update(iscsilun, sector_num, nb_sectors, false, true);
+ iscsi_allocmap_update(iscsilun, offset, bytes, false, true);
}
-static void iscsi_allocmap_set_invalid(IscsiLun *iscsilun, int64_t sector_num,
- int nb_sectors)
+static void iscsi_allocmap_set_invalid(IscsiLun *iscsilun, int64_t offset,
+ int64_t bytes)
{
- iscsi_allocmap_update(iscsilun, sector_num, nb_sectors, false, false);
+ iscsi_allocmap_update(iscsilun, offset, bytes, false, false);
}
static void iscsi_allocmap_invalidate(IscsiLun *iscsilun)
@@ -529,34 +527,30 @@ static void iscsi_allocmap_invalidate(IscsiLun *iscsilun)
}
static inline bool
-iscsi_allocmap_is_allocated(IscsiLun *iscsilun, int64_t sector_num,
- int nb_sectors)
+iscsi_allocmap_is_allocated(IscsiLun *iscsilun, int64_t offset,
+ int64_t bytes)
{
unsigned long size;
if (iscsilun->allocmap == NULL) {
return true;
}
assert(iscsilun->cluster_size);
- size = DIV_ROUND_UP(sector_num + nb_sectors,
- iscsilun->cluster_size >> BDRV_SECTOR_BITS);
+ size = DIV_ROUND_UP(offset + bytes, iscsilun->cluster_size);
return !(find_next_bit(iscsilun->allocmap, size,
- sector_num * BDRV_SECTOR_SIZE /
- iscsilun->cluster_size) == size);
+ offset / iscsilun->cluster_size) == size);
}
static inline bool iscsi_allocmap_is_valid(IscsiLun *iscsilun,
- int64_t sector_num, int nb_sectors)
+ int64_t offset, int64_t bytes)
{
unsigned long size;
if (iscsilun->allocmap_valid == NULL) {
return false;
}
assert(iscsilun->cluster_size);
- size = DIV_ROUND_UP(sector_num + nb_sectors,
- iscsilun->cluster_size >> BDRV_SECTOR_BITS);
+ size = DIV_ROUND_UP(offset + bytes, iscsilun->cluster_size);
return (find_next_zero_bit(iscsilun->allocmap_valid, size,
- sector_num * BDRV_SECTOR_SIZE /
- iscsilun->cluster_size) == size);
+ offset / iscsilun->cluster_size) == size);
}
static int coroutine_fn
@@ -638,14 +632,16 @@ retry:
}
if (iTask.status != SCSI_STATUS_GOOD) {
- iscsi_allocmap_set_invalid(iscsilun, sector_num, nb_sectors);
+ iscsi_allocmap_set_invalid(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+ nb_sectors * BDRV_SECTOR_SIZE);
error_report("iSCSI WRITE10/16 failed at lba %" PRIu64 ": %s", lba,
iTask.err_str);
r = iTask.err_code;
goto out_unlock;
}
- iscsi_allocmap_set_allocated(iscsilun, sector_num, nb_sectors);
+ iscsi_allocmap_set_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+ nb_sectors * BDRV_SECTOR_SIZE);
out_unlock:
qemu_mutex_unlock(&iscsilun->mutex);
@@ -744,9 +740,11 @@ retry:
}
if (ret & BDRV_BLOCK_ZERO) {
- iscsi_allocmap_set_unallocated(iscsilun, sector_num, *pnum);
+ iscsi_allocmap_set_unallocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+ *pnum * BDRV_SECTOR_SIZE);
} else {
- iscsi_allocmap_set_allocated(iscsilun, sector_num, *pnum);
+ iscsi_allocmap_set_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+ *pnum * BDRV_SECTOR_SIZE);
}
if (*pnum > nb_sectors) {
@@ -786,15 +784,19 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
/* if cache.direct is off and we have a valid entry in our allocation map
* we can skip checking the block status and directly return zeroes if
* the request falls within an unallocated area */
- if (iscsi_allocmap_is_valid(iscsilun, sector_num, nb_sectors) &&
- !iscsi_allocmap_is_allocated(iscsilun, sector_num, nb_sectors)) {
+ if (iscsi_allocmap_is_valid(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+ nb_sectors * BDRV_SECTOR_SIZE) &&
+ !iscsi_allocmap_is_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+ nb_sectors * BDRV_SECTOR_SIZE)) {
qemu_iovec_memset(iov, 0, 0x00, iov->size);
return 0;
}
if (nb_sectors >= ISCSI_CHECKALLOC_THRES &&
- !iscsi_allocmap_is_valid(iscsilun, sector_num, nb_sectors) &&
- !iscsi_allocmap_is_allocated(iscsilun, sector_num, nb_sectors)) {
+ !iscsi_allocmap_is_valid(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+ nb_sectors * BDRV_SECTOR_SIZE) &&
+ !iscsi_allocmap_is_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+ nb_sectors * BDRV_SECTOR_SIZE)) {
int pnum;
BlockDriverState *file;
/* check the block status from the beginning of the cluster
@@ -1157,8 +1159,7 @@ retry:
goto retry;
}
- iscsi_allocmap_set_invalid(iscsilun, offset >> BDRV_SECTOR_BITS,
- bytes >> BDRV_SECTOR_BITS);
+ iscsi_allocmap_set_invalid(iscsilun, offset, bytes);
if (iTask.status == SCSI_STATUS_CHECK_CONDITION) {
/* the target might fail with a check condition if it
@@ -1271,8 +1272,7 @@ retry:
}
if (iTask.status != SCSI_STATUS_GOOD) {
- iscsi_allocmap_set_invalid(iscsilun, offset >> BDRV_SECTOR_BITS,
- bytes >> BDRV_SECTOR_BITS);
+ iscsi_allocmap_set_invalid(iscsilun, offset, bytes);
error_report("iSCSI WRITESAME10/16 failed at lba %" PRIu64 ": %s",
lba, iTask.err_str);
r = iTask.err_code;
@@ -1280,11 +1280,9 @@ retry:
}
if (flags & BDRV_REQ_MAY_UNMAP) {
- iscsi_allocmap_set_invalid(iscsilun, offset >> BDRV_SECTOR_BITS,
- bytes >> BDRV_SECTOR_BITS);
+ iscsi_allocmap_set_invalid(iscsilun, offset, bytes);
} else {
- iscsi_allocmap_set_allocated(iscsilun, offset >> BDRV_SECTOR_BITS,
- bytes >> BDRV_SECTOR_BITS);
+ iscsi_allocmap_set_allocated(iscsilun, offset, bytes);
}
out_unlock:
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* Re: [Qemu-devel] [PATCH v7 06/20] iscsi: Switch iscsi_allocmap_update() to byte-based
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 06/20] iscsi: Switch iscsi_allocmap_update() " Eric Blake
@ 2018-01-08 8:08 ` Fam Zheng
0 siblings, 0 replies; 29+ messages in thread
From: Fam Zheng @ 2018-01-08 8:08 UTC (permalink / raw)
To: Eric Blake
Cc: qemu-devel, kwolf, vsementsov, qemu-block, jcody, Peter Lieven,
Max Reitz, Ronnie Sahlberg, Paolo Bonzini
On Fri, 01/05 16:57, Eric Blake wrote:
> We are gradually converting to byte-based interfaces, as they are
> easier to reason about than sector-based. Convert all uses of
> the allocmap (no semantic change). Callers that already had bytes
> available are simpler, and callers that now scale to bytes will be
> easier to switch to byte-based in the future.
>
> Signed-off-by: Eric Blake <eblake@redhat.com>
> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
>
Reviewed-by: Fam Zheng <famz@redhat.com>
^ permalink raw reply [flat|nested] 29+ messages in thread
* [Qemu-devel] [PATCH v7 07/20] iscsi: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (5 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 06/20] iscsi: Switch iscsi_allocmap_update() " Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-08 8:14 ` Fam Zheng
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 08/20] null: " Eric Blake
` (14 subsequent siblings)
21 siblings, 1 reply; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, famz, jcody, qemu-block, vsementsov, Ronnie Sahlberg,
Paolo Bonzini, Peter Lieven, Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the iscsi driver accordingly. In this case,
it is handy to teach iscsi_co_block_status() to handle a NULL map
and file parameter, even though the block layer passes non-NULL
values, because we also call the function directly. For now, there
are no optimizations done based on the want_zero flag.
We can also make the simplification of asserting that the block
layer passed in aligned values.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
v7: rebase to master
v6: no change
v5: assert rather than check for alignment
v4: rebase to interface tweaks
v3: no change
v2: rebase to mapping parameter
---
block/iscsi.c | 67 ++++++++++++++++++++++++++++-------------------------------
1 file changed, 32 insertions(+), 35 deletions(-)
diff --git a/block/iscsi.c b/block/iscsi.c
index a823cdcb0b..ea4cc08b0c 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -651,34 +651,34 @@ out_unlock:
-static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors, int *pnum,
- BlockDriverState **file)
+static int coroutine_fn iscsi_co_block_status(BlockDriverState *bs,
+ bool want_zero, int64_t offset,
+ int64_t bytes, int64_t *pnum,
+ int64_t *map,
+ BlockDriverState **file)
{
IscsiLun *iscsilun = bs->opaque;
struct scsi_get_lba_status *lbas = NULL;
struct scsi_lba_status_descriptor *lbasd = NULL;
struct IscsiTask iTask;
uint64_t lba;
- int64_t ret;
+ int ret;
- if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
- ret = -EINVAL;
- goto out;
- }
+ assert(QEMU_IS_ALIGNED(offset | bytes, iscsilun->block_size));
/* default to all sectors allocated */
- ret = BDRV_BLOCK_DATA;
- ret |= (sector_num << BDRV_SECTOR_BITS) | BDRV_BLOCK_OFFSET_VALID;
- *pnum = nb_sectors;
+ ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
+ if (map) {
+ *map = offset;
+ }
+ *pnum = bytes;
/* LUN does not support logical block provisioning */
if (!iscsilun->lbpme) {
goto out;
}
- lba = sector_qemu2lun(sector_num, iscsilun);
+ lba = offset / iscsilun->block_size;
iscsi_co_init_iscsitask(iscsilun, &iTask);
qemu_mutex_lock(&iscsilun->mutex);
@@ -724,12 +724,12 @@ retry:
lbasd = &lbas->descriptors[0];
- if (sector_qemu2lun(sector_num, iscsilun) != lbasd->lba) {
+ if (lba != lbasd->lba) {
ret = -EIO;
goto out_unlock;
}
- *pnum = sector_lun2qemu(lbasd->num_blocks, iscsilun);
+ *pnum = lbasd->num_blocks * iscsilun->block_size;
if (lbasd->provisioning == SCSI_PROVISIONING_TYPE_DEALLOCATED ||
lbasd->provisioning == SCSI_PROVISIONING_TYPE_ANCHORED) {
@@ -740,15 +740,13 @@ retry:
}
if (ret & BDRV_BLOCK_ZERO) {
- iscsi_allocmap_set_unallocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
- *pnum * BDRV_SECTOR_SIZE);
+ iscsi_allocmap_set_unallocated(iscsilun, offset, *pnum);
} else {
- iscsi_allocmap_set_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
- *pnum * BDRV_SECTOR_SIZE);
+ iscsi_allocmap_set_allocated(iscsilun, offset, *pnum);
}
- if (*pnum > nb_sectors) {
- *pnum = nb_sectors;
+ if (*pnum > bytes) {
+ *pnum = bytes;
}
out_unlock:
qemu_mutex_unlock(&iscsilun->mutex);
@@ -757,7 +755,7 @@ out:
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
}
- if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID) {
+ if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID && file) {
*file = bs;
}
return ret;
@@ -797,25 +795,24 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
nb_sectors * BDRV_SECTOR_SIZE) &&
!iscsi_allocmap_is_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
nb_sectors * BDRV_SECTOR_SIZE)) {
- int pnum;
- BlockDriverState *file;
+ int64_t pnum;
/* check the block status from the beginning of the cluster
* containing the start sector */
- int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
- int head;
- int64_t ret;
+ int64_t head;
+ int ret;
- assert(cluster_sectors);
- head = sector_num % cluster_sectors;
- ret = iscsi_co_get_block_status(bs, sector_num - head,
- BDRV_REQUEST_MAX_SECTORS, &pnum,
- &file);
+ assert(iscsilun->cluster_size);
+ head = (sector_num * BDRV_SECTOR_SIZE) % iscsilun->cluster_size;
+ ret = iscsi_co_block_status(bs, false,
+ sector_num * BDRV_SECTOR_SIZE - head,
+ BDRV_REQUEST_MAX_BYTES, &pnum, NULL, NULL);
if (ret < 0) {
return ret;
}
/* if the whole request falls into an unallocated area we can avoid
* reading and directly return zeroes instead */
- if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors + head) {
+ if (ret & BDRV_BLOCK_ZERO &&
+ pnum >= nb_sectors * BDRV_SECTOR_SIZE + head) {
qemu_iovec_memset(iov, 0, 0x00, iov->size);
return 0;
}
@@ -2213,7 +2210,7 @@ static BlockDriver bdrv_iscsi = {
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
- .bdrv_co_get_block_status = iscsi_co_get_block_status,
+ .bdrv_co_block_status = iscsi_co_block_status,
.bdrv_co_pdiscard = iscsi_co_pdiscard,
.bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
@@ -2248,7 +2245,7 @@ static BlockDriver bdrv_iser = {
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
- .bdrv_co_get_block_status = iscsi_co_get_block_status,
+ .bdrv_co_block_status = iscsi_co_block_status,
.bdrv_co_pdiscard = iscsi_co_pdiscard,
.bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* Re: [Qemu-devel] [PATCH v7 07/20] iscsi: Switch to .bdrv_co_block_status()
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 07/20] iscsi: Switch to .bdrv_co_block_status() Eric Blake
@ 2018-01-08 8:14 ` Fam Zheng
0 siblings, 0 replies; 29+ messages in thread
From: Fam Zheng @ 2018-01-08 8:14 UTC (permalink / raw)
To: Eric Blake
Cc: qemu-devel, kwolf, vsementsov, qemu-block, jcody, Peter Lieven,
Max Reitz, Ronnie Sahlberg, Paolo Bonzini
On Fri, 01/05 16:57, Eric Blake wrote:
> We are gradually moving away from sector-based interfaces, towards
> byte-based. Update the iscsi driver accordingly. In this case,
> it is handy to teach iscsi_co_block_status() to handle a NULL map
> and file parameter, even though the block layer passes non-NULL
> values, because we also call the function directly. For now, there
> are no optimizations done based on the want_zero flag.
>
> We can also make the simplification of asserting that the block
> layer passed in aligned values.
>
> Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
^ permalink raw reply [flat|nested] 29+ messages in thread
* [Qemu-devel] [PATCH v7 08/20] null: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (6 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 07/20] iscsi: Switch to .bdrv_co_block_status() Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 09/20] parallels: " Eric Blake
` (13 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, famz, jcody, qemu-block, vsementsov, Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the null driver accordingly.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v6-v7: no change
v5: minor fix to type of 'ret'
v4: rebase to interface tweak
v3: no change
v2: rebase to mapping parameter
---
block/null.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/block/null.c b/block/null.c
index 0cdabaa440..2c16935f3c 100644
--- a/block/null.c
+++ b/block/null.c
@@ -222,22 +222,23 @@ static int null_reopen_prepare(BDRVReopenState *reopen_state,
return 0;
}
-static int64_t coroutine_fn null_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors, int *pnum,
- BlockDriverState **file)
+static int coroutine_fn null_co_block_status(BlockDriverState *bs,
+ bool want_zero, int64_t offset,
+ int64_t bytes, int64_t *pnum,
+ int64_t *map,
+ BlockDriverState **file)
{
BDRVNullState *s = bs->opaque;
- off_t start = sector_num * BDRV_SECTOR_SIZE;
+ int ret = BDRV_BLOCK_OFFSET_VALID;
- *pnum = nb_sectors;
+ *pnum = bytes;
+ *map = offset;
*file = bs;
if (s->read_zeroes) {
- return BDRV_BLOCK_OFFSET_VALID | start | BDRV_BLOCK_ZERO;
- } else {
- return BDRV_BLOCK_OFFSET_VALID | start;
+ ret |= BDRV_BLOCK_ZERO;
}
+ return ret;
}
static void null_refresh_filename(BlockDriverState *bs, QDict *opts)
@@ -269,7 +270,7 @@ static BlockDriver bdrv_null_co = {
.bdrv_co_flush_to_disk = null_co_flush,
.bdrv_reopen_prepare = null_reopen_prepare,
- .bdrv_co_get_block_status = null_co_get_block_status,
+ .bdrv_co_block_status = null_co_block_status,
.bdrv_refresh_filename = null_refresh_filename,
};
@@ -289,7 +290,7 @@ static BlockDriver bdrv_null_aio = {
.bdrv_aio_flush = null_aio_flush,
.bdrv_reopen_prepare = null_reopen_prepare,
- .bdrv_co_get_block_status = null_co_get_block_status,
+ .bdrv_co_block_status = null_co_block_status,
.bdrv_refresh_filename = null_refresh_filename,
};
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 09/20] parallels: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (7 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 08/20] null: " Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-08 8:05 ` Fam Zheng
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 10/20] qcow: " Eric Blake
` (12 subsequent siblings)
21 siblings, 1 reply; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, famz, jcody, qemu-block, vsementsov, Stefan Hajnoczi,
Denis V. Lunev, Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the parallels driver accordingly. Note that
the internal function block_status() is still sector-based, because
it is still in use by other sector-based functions; but that's okay
because request_alignment is 512 as a result of those functions.
For now, no optimizations are added based on the mapping hint.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
v7: fix bug in *map [Vladimir]
v6: no change
v5: fix pnum when return is 0
v4: rebase to interface tweak, R-b dropped
v3: no change
v2: rebase to mapping parameter; it is ignored, so R-b kept
---
block/parallels.c | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
diff --git a/block/parallels.c b/block/parallels.c
index 9545761f49..64e80874a4 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -280,23 +280,31 @@ static coroutine_fn int parallels_co_flush_to_os(BlockDriverState *bs)
}
-static int64_t coroutine_fn parallels_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn parallels_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset,
+ int64_t bytes,
+ int64_t *pnum,
+ int64_t *map,
+ BlockDriverState **file)
{
BDRVParallelsState *s = bs->opaque;
- int64_t offset;
+ int count;
+ assert(QEMU_IS_ALIGNED(offset | bytes, BDRV_SECTOR_SIZE));
qemu_co_mutex_lock(&s->lock);
- offset = block_status(s, sector_num, nb_sectors, pnum);
+ offset = block_status(s, offset >> BDRV_SECTOR_BITS,
+ bytes >> BDRV_SECTOR_BITS, &count);
qemu_co_mutex_unlock(&s->lock);
+ *pnum = count * BDRV_SECTOR_SIZE;
if (offset < 0) {
return 0;
}
+ *map = offset * BDRV_SECTOR_SIZE;
*file = bs->file->bs;
- return (offset << BDRV_SECTOR_BITS) |
- BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
+ return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
}
static coroutine_fn int parallels_co_writev(BlockDriverState *bs,
@@ -793,7 +801,7 @@ static BlockDriver bdrv_parallels = {
.bdrv_open = parallels_open,
.bdrv_close = parallels_close,
.bdrv_child_perm = bdrv_format_default_perms,
- .bdrv_co_get_block_status = parallels_co_get_block_status,
+ .bdrv_co_block_status = parallels_co_block_status,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
.bdrv_co_flush_to_os = parallels_co_flush_to_os,
.bdrv_co_readv = parallels_co_readv,
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* Re: [Qemu-devel] [PATCH v7 09/20] parallels: Switch to .bdrv_co_block_status()
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 09/20] parallels: " Eric Blake
@ 2018-01-08 8:05 ` Fam Zheng
0 siblings, 0 replies; 29+ messages in thread
From: Fam Zheng @ 2018-01-08 8:05 UTC (permalink / raw)
To: Eric Blake
Cc: qemu-devel, kwolf, vsementsov, qemu-block, jcody, Max Reitz,
Stefan Hajnoczi, Denis V. Lunev
On Fri, 01/05 16:57, Eric Blake wrote:
> We are gradually moving away from sector-based interfaces, towards
> byte-based. Update the parallels driver accordingly. Note that
> the internal function block_status() is still sector-based, because
> it is still in use by other sector-based functions; but that's okay
> because request_alignment is 512 as a result of those functions.
> For now, no optimizations are added based on the mapping hint.
>
> Signed-off-by: Eric Blake <eblake@redhat.com>
> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
>
Reviewed-by: Fam Zheng <famz@redhat.com>
^ permalink raw reply [flat|nested] 29+ messages in thread
* [Qemu-devel] [PATCH v7 10/20] qcow: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (8 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 09/20] parallels: " Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 11/20] qcow2: " Eric Blake
` (11 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, famz, jcody, qemu-block, vsementsov, Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the qcow driver accordingly. There is no
intent to optimize based on the want_zero flag for this format.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v5-v7: no change
v4: rebase to interface tweak
v3: rebase to master
v2: rebase to mapping flag
---
block/qcow.c | 27 ++++++++++++++++-----------
1 file changed, 16 insertions(+), 11 deletions(-)
diff --git a/block/qcow.c b/block/qcow.c
index 9569deeaf0..f09661dc0c 100644
--- a/block/qcow.c
+++ b/block/qcow.c
@@ -513,23 +513,28 @@ static int get_cluster_offset(BlockDriverState *bs,
return 1;
}
-static int64_t coroutine_fn qcow_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn qcow_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset, int64_t bytes,
+ int64_t *pnum, int64_t *map,
+ BlockDriverState **file)
{
BDRVQcowState *s = bs->opaque;
- int index_in_cluster, n, ret;
+ int index_in_cluster, ret;
+ int64_t n;
uint64_t cluster_offset;
qemu_co_mutex_lock(&s->lock);
- ret = get_cluster_offset(bs, sector_num << 9, 0, 0, 0, 0, &cluster_offset);
+ ret = get_cluster_offset(bs, offset, 0, 0, 0, 0, &cluster_offset);
qemu_co_mutex_unlock(&s->lock);
if (ret < 0) {
return ret;
}
- index_in_cluster = sector_num & (s->cluster_sectors - 1);
- n = s->cluster_sectors - index_in_cluster;
- if (n > nb_sectors)
- n = nb_sectors;
+ index_in_cluster = offset & (s->cluster_size - 1);
+ n = s->cluster_size - index_in_cluster;
+ if (n > bytes) {
+ n = bytes;
+ }
*pnum = n;
if (!cluster_offset) {
return 0;
@@ -537,9 +542,9 @@ static int64_t coroutine_fn qcow_co_get_block_status(BlockDriverState *bs,
if ((cluster_offset & QCOW_OFLAG_COMPRESSED) || s->crypto) {
return BDRV_BLOCK_DATA;
}
- cluster_offset |= (index_in_cluster << BDRV_SECTOR_BITS);
+ *map = cluster_offset | index_in_cluster;
*file = bs->file->bs;
- return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | cluster_offset;
+ return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
}
static int decompress_buffer(uint8_t *out_buf, int out_buf_size,
@@ -1111,7 +1116,7 @@ static BlockDriver bdrv_qcow = {
.bdrv_co_readv = qcow_co_readv,
.bdrv_co_writev = qcow_co_writev,
- .bdrv_co_get_block_status = qcow_co_get_block_status,
+ .bdrv_co_block_status = qcow_co_block_status,
.bdrv_make_empty = qcow_make_empty,
.bdrv_co_pwritev_compressed = qcow_co_pwritev_compressed,
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 11/20] qcow2: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (9 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 10/20] qcow: " Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 12/20] qed: " Eric Blake
` (10 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, famz, jcody, qemu-block, vsementsov, Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the qcow2 driver accordingly.
For now, we are ignoring the 'want_zero' hint. However, it should
be relatively straightforward to honor the hint as a way to return
larger *pnum values when we have consecutive clusters with the same
data/zero status but which differ only in having non-consecutive
mappings.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v5-v7: no change
v4: update to interface tweak
v3: no change
v2: rebase to mapping flag
---
block/qcow2.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/block/qcow2.c b/block/qcow2.c
index 4348b2c0c5..d0b4c38110 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -1637,32 +1637,34 @@ static void qcow2_join_options(QDict *options, QDict *old_options)
}
}
-static int64_t coroutine_fn qcow2_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn qcow2_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset, int64_t count,
+ int64_t *pnum, int64_t *map,
+ BlockDriverState **file)
{
BDRVQcow2State *s = bs->opaque;
uint64_t cluster_offset;
int index_in_cluster, ret;
unsigned int bytes;
- int64_t status = 0;
+ int status = 0;
- bytes = MIN(INT_MAX, nb_sectors * BDRV_SECTOR_SIZE);
+ bytes = MIN(INT_MAX, count);
qemu_co_mutex_lock(&s->lock);
- ret = qcow2_get_cluster_offset(bs, sector_num << BDRV_SECTOR_BITS, &bytes,
- &cluster_offset);
+ ret = qcow2_get_cluster_offset(bs, offset, &bytes, &cluster_offset);
qemu_co_mutex_unlock(&s->lock);
if (ret < 0) {
return ret;
}
- *pnum = bytes >> BDRV_SECTOR_BITS;
+ *pnum = bytes;
if (cluster_offset != 0 && ret != QCOW2_CLUSTER_COMPRESSED &&
!s->crypto) {
- index_in_cluster = sector_num & (s->cluster_sectors - 1);
- cluster_offset |= (index_in_cluster << BDRV_SECTOR_BITS);
+ index_in_cluster = offset & (s->cluster_size - 1);
+ *map = cluster_offset | index_in_cluster;
*file = bs->file->bs;
- status |= BDRV_BLOCK_OFFSET_VALID | cluster_offset;
+ status |= BDRV_BLOCK_OFFSET_VALID;
}
if (ret == QCOW2_CLUSTER_ZERO_PLAIN || ret == QCOW2_CLUSTER_ZERO_ALLOC) {
status |= BDRV_BLOCK_ZERO;
@@ -4320,7 +4322,7 @@ BlockDriver bdrv_qcow2 = {
.bdrv_child_perm = bdrv_format_default_perms,
.bdrv_create = qcow2_create,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
- .bdrv_co_get_block_status = qcow2_co_get_block_status,
+ .bdrv_co_block_status = qcow2_co_block_status,
.bdrv_co_preadv = qcow2_co_preadv,
.bdrv_co_pwritev = qcow2_co_pwritev,
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 12/20] qed: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (10 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 11/20] qcow2: " Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 13/20] raw: " Eric Blake
` (9 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, famz, jcody, qemu-block, vsementsov, Stefan Hajnoczi,
Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the qed driver accordingly, taking the opportunity
to inline qed_is_allocated_cb() into its lone caller (the callback
used to be important, until we switched qed to coroutines). There is
no intent to optimize based on the want_zero flag for this format.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v6-v7: no change
v5: initialize len before qed_find_cluster() [Vladimir]
v4: rebase to interface change, inline pointless callback
v3: no change
v2: rebase to mapping flag, fix mask in qed_is_allocated_cb
---
block/qed.c | 84 +++++++++++++++++++++----------------------------------------
1 file changed, 28 insertions(+), 56 deletions(-)
diff --git a/block/qed.c b/block/qed.c
index 821dcaa055..13fbc3e2f1 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -688,74 +688,46 @@ finish:
return ret;
}
-typedef struct {
- BlockDriverState *bs;
- Coroutine *co;
- uint64_t pos;
- int64_t status;
- int *pnum;
- BlockDriverState **file;
-} QEDIsAllocatedCB;
-
-/* Called with table_lock held. */
-static void qed_is_allocated_cb(void *opaque, int ret, uint64_t offset, size_t len)
-{
- QEDIsAllocatedCB *cb = opaque;
- BDRVQEDState *s = cb->bs->opaque;
- *cb->pnum = len / BDRV_SECTOR_SIZE;
- switch (ret) {
- case QED_CLUSTER_FOUND:
- offset |= qed_offset_into_cluster(s, cb->pos);
- cb->status = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | offset;
- *cb->file = cb->bs->file->bs;
- break;
- case QED_CLUSTER_ZERO:
- cb->status = BDRV_BLOCK_ZERO;
- break;
- case QED_CLUSTER_L2:
- case QED_CLUSTER_L1:
- cb->status = 0;
- break;
- default:
- assert(ret < 0);
- cb->status = ret;
- break;
- }
-
- if (cb->co) {
- aio_co_wake(cb->co);
- }
-}
-
-static int64_t coroutine_fn bdrv_qed_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors, int *pnum,
+static int coroutine_fn bdrv_qed_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t pos, int64_t bytes,
+ int64_t *pnum, int64_t *map,
BlockDriverState **file)
{
BDRVQEDState *s = bs->opaque;
- size_t len = (size_t)nb_sectors * BDRV_SECTOR_SIZE;
- QEDIsAllocatedCB cb = {
- .bs = bs,
- .pos = (uint64_t)sector_num * BDRV_SECTOR_SIZE,
- .status = BDRV_BLOCK_OFFSET_MASK,
- .pnum = pnum,
- .file = file,
- };
+ size_t len = MIN(bytes, SIZE_MAX);
+ int status;
QEDRequest request = { .l2_table = NULL };
uint64_t offset;
int ret;
qemu_co_mutex_lock(&s->table_lock);
- ret = qed_find_cluster(s, &request, cb.pos, &len, &offset);
- qed_is_allocated_cb(&cb, ret, offset, len);
+ ret = qed_find_cluster(s, &request, pos, &len, &offset);
- /* The callback was invoked immediately */
- assert(cb.status != BDRV_BLOCK_OFFSET_MASK);
+ *pnum = len;
+ switch (ret) {
+ case QED_CLUSTER_FOUND:
+ *map = offset | qed_offset_into_cluster(s, pos);
+ status = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
+ *file = bs->file->bs;
+ break;
+ case QED_CLUSTER_ZERO:
+ status = BDRV_BLOCK_ZERO;
+ break;
+ case QED_CLUSTER_L2:
+ case QED_CLUSTER_L1:
+ status = 0;
+ break;
+ default:
+ assert(ret < 0);
+ status = ret;
+ break;
+ }
qed_unref_l2_cache_entry(request.l2_table);
qemu_co_mutex_unlock(&s->table_lock);
- return cb.status;
+ return status;
}
static BDRVQEDState *acb_to_s(QEDAIOCB *acb)
@@ -1595,7 +1567,7 @@ static BlockDriver bdrv_qed = {
.bdrv_child_perm = bdrv_format_default_perms,
.bdrv_create = bdrv_qed_create,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
- .bdrv_co_get_block_status = bdrv_qed_co_get_block_status,
+ .bdrv_co_block_status = bdrv_qed_co_block_status,
.bdrv_co_readv = bdrv_qed_co_readv,
.bdrv_co_writev = bdrv_qed_co_writev,
.bdrv_co_pwrite_zeroes = bdrv_qed_co_pwrite_zeroes,
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 13/20] raw: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (11 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 12/20] qed: " Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 14/20] sheepdog: " Eric Blake
` (8 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, famz, jcody, qemu-block, vsementsov, Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the raw driver accordingly.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v5-v7: no change
v4: rebase to interface tweak
v3: no change
v2: rebase to mapping
---
block/raw-format.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/block/raw-format.c b/block/raw-format.c
index ab552c0954..830243a8e4 100644
--- a/block/raw-format.c
+++ b/block/raw-format.c
@@ -250,17 +250,17 @@ fail:
return ret;
}
-static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors, int *pnum,
+static int coroutine_fn raw_co_block_status(BlockDriverState *bs,
+ bool want_zero, int64_t offset,
+ int64_t bytes, int64_t *pnum,
+ int64_t *map,
BlockDriverState **file)
{
BDRVRawState *s = bs->opaque;
- *pnum = nb_sectors;
+ *pnum = bytes;
*file = bs->file->bs;
- sector_num += s->offset / BDRV_SECTOR_SIZE;
- return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID |
- (sector_num << BDRV_SECTOR_BITS);
+ *map = offset + s->offset;
+ return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID;
}
static int coroutine_fn raw_co_pwrite_zeroes(BlockDriverState *bs,
@@ -496,7 +496,7 @@ BlockDriver bdrv_raw = {
.bdrv_co_pwritev = &raw_co_pwritev,
.bdrv_co_pwrite_zeroes = &raw_co_pwrite_zeroes,
.bdrv_co_pdiscard = &raw_co_pdiscard,
- .bdrv_co_get_block_status = &raw_co_get_block_status,
+ .bdrv_co_block_status = &raw_co_block_status,
.bdrv_truncate = &raw_truncate,
.bdrv_getlength = &raw_getlength,
.has_variable_length = true,
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 14/20] sheepdog: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (12 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 13/20] raw: " Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 15/20] vdi: Avoid bitrot of debugging code Eric Blake
` (7 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, famz, jcody, qemu-block, vsementsov, Hitoshi Mitake,
Liu Yuan, Max Reitz, open list:Sheepdog
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the sheepdog driver accordingly.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
---
v7: rebase to minor spacing changes in master
v5-v6: no change
v4: update to interface tweak
v3: no change
v2: rebase to mapping flag
---
block/sheepdog.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/block/sheepdog.c b/block/sheepdog.c
index f684477328..8a7b688ece 100644
--- a/block/sheepdog.c
+++ b/block/sheepdog.c
@@ -2987,19 +2987,19 @@ static coroutine_fn int sd_co_pdiscard(BlockDriverState *bs, int64_t offset,
return acb.ret;
}
-static coroutine_fn int64_t
-sd_co_get_block_status(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
- int *pnum, BlockDriverState **file)
+static coroutine_fn int
+sd_co_block_status(BlockDriverState *bs, bool want_zero, int64_t offset,
+ int64_t bytes, int64_t *pnum, int64_t *map,
+ BlockDriverState **file)
{
BDRVSheepdogState *s = bs->opaque;
SheepdogInode *inode = &s->inode;
uint32_t object_size = (UINT32_C(1) << inode->block_size_shift);
- uint64_t offset = sector_num * BDRV_SECTOR_SIZE;
unsigned long start = offset / object_size,
- end = DIV_ROUND_UP((sector_num + nb_sectors) *
- BDRV_SECTOR_SIZE, object_size);
+ end = DIV_ROUND_UP(offset + bytes, object_size);
unsigned long idx;
- int64_t ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | offset;
+ *map = offset;
+ int ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
for (idx = start; idx < end; idx++) {
if (inode->data_vdi_id[idx] == 0) {
@@ -3016,9 +3016,9 @@ sd_co_get_block_status(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
}
}
- *pnum = (idx - start) * object_size / BDRV_SECTOR_SIZE;
- if (*pnum > nb_sectors) {
- *pnum = nb_sectors;
+ *pnum = (idx - start) * object_size;
+ if (*pnum > bytes) {
+ *pnum = bytes;
}
if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID) {
*file = bs;
@@ -3096,7 +3096,7 @@ static BlockDriver bdrv_sheepdog = {
.bdrv_co_writev = sd_co_writev,
.bdrv_co_flush_to_disk = sd_co_flush_to_disk,
.bdrv_co_pdiscard = sd_co_pdiscard,
- .bdrv_co_get_block_status = sd_co_get_block_status,
+ .bdrv_co_block_status = sd_co_block_status,
.bdrv_snapshot_create = sd_snapshot_create,
.bdrv_snapshot_goto = sd_snapshot_goto,
@@ -3132,7 +3132,7 @@ static BlockDriver bdrv_sheepdog_tcp = {
.bdrv_co_writev = sd_co_writev,
.bdrv_co_flush_to_disk = sd_co_flush_to_disk,
.bdrv_co_pdiscard = sd_co_pdiscard,
- .bdrv_co_get_block_status = sd_co_get_block_status,
+ .bdrv_co_block_status = sd_co_block_status,
.bdrv_snapshot_create = sd_snapshot_create,
.bdrv_snapshot_goto = sd_snapshot_goto,
@@ -3168,7 +3168,7 @@ static BlockDriver bdrv_sheepdog_unix = {
.bdrv_co_writev = sd_co_writev,
.bdrv_co_flush_to_disk = sd_co_flush_to_disk,
.bdrv_co_pdiscard = sd_co_pdiscard,
- .bdrv_co_get_block_status = sd_co_get_block_status,
+ .bdrv_co_block_status = sd_co_block_status,
.bdrv_snapshot_create = sd_snapshot_create,
.bdrv_snapshot_goto = sd_snapshot_goto,
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 15/20] vdi: Avoid bitrot of debugging code
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (13 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 14/20] sheepdog: " Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 16/20] vdi: Switch to .bdrv_co_block_status() Eric Blake
` (6 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, famz, jcody, qemu-block, vsementsov, Stefan Weil,
Max Reitz
Rework the debug define so that we always get -Wformat checking,
even when debugging is disabled.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v2-v7: no change
---
block/vdi.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/block/vdi.c b/block/vdi.c
index 8da5dfc897..6f83221ddc 100644
--- a/block/vdi.c
+++ b/block/vdi.c
@@ -86,12 +86,18 @@
#define DEFAULT_CLUSTER_SIZE (1 * MiB)
#if defined(CONFIG_VDI_DEBUG)
-#define logout(fmt, ...) \
- fprintf(stderr, "vdi\t%-24s" fmt, __func__, ##__VA_ARGS__)
+#define VDI_DEBUG 1
#else
-#define logout(fmt, ...) ((void)0)
+#define VDI_DEBUG 0
#endif
+#define logout(fmt, ...) \
+ do { \
+ if (VDI_DEBUG) { \
+ fprintf(stderr, "vdi\t%-24s" fmt, __func__, ##__VA_ARGS__); \
+ } \
+ } while (0)
+
/* Image signature. */
#define VDI_SIGNATURE 0xbeda107f
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 16/20] vdi: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (14 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 15/20] vdi: Avoid bitrot of debugging code Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 17/20] vmdk: " Eric Blake
` (5 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, famz, jcody, qemu-block, vsementsov, Stefan Weil,
Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the vdi driver accordingly. Note that the
TODO is already covered (the block layer guarantees bounds of its
requests), and that we can remove the now-unused s->block_sectors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v6-v7: no change
v5: fix pnum when offset rounded down to block_size [Vladimir]
v4: rebase to interface tweak
v3: no change
v2: rebase to mapping flag
---
block/vdi.c | 33 +++++++++++++--------------------
1 file changed, 13 insertions(+), 20 deletions(-)
diff --git a/block/vdi.c b/block/vdi.c
index 6f83221ddc..f309562d36 100644
--- a/block/vdi.c
+++ b/block/vdi.c
@@ -171,8 +171,6 @@ typedef struct {
uint32_t *bmap;
/* Size of block (bytes). */
uint32_t block_size;
- /* Size of block (sectors). */
- uint32_t block_sectors;
/* First sector of block map. */
uint32_t bmap_sector;
/* VDI header (converted to host endianness). */
@@ -462,7 +460,6 @@ static int vdi_open(BlockDriverState *bs, QDict *options, int flags,
bs->total_sectors = header.disk_size / SECTOR_SIZE;
s->block_size = header.block_size;
- s->block_sectors = header.block_size / SECTOR_SIZE;
s->bmap_sector = header.offset_bmap / SECTOR_SIZE;
s->header = header;
@@ -508,33 +505,29 @@ static int vdi_reopen_prepare(BDRVReopenState *state,
return 0;
}
-static int64_t coroutine_fn vdi_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn vdi_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset, int64_t bytes,
+ int64_t *pnum, int64_t *map,
+ BlockDriverState **file)
{
- /* TODO: Check for too large sector_num (in bdrv_is_allocated or here). */
BDRVVdiState *s = (BDRVVdiState *)bs->opaque;
- size_t bmap_index = sector_num / s->block_sectors;
- size_t sector_in_block = sector_num % s->block_sectors;
- int n_sectors = s->block_sectors - sector_in_block;
+ size_t bmap_index = offset / s->block_size;
+ size_t index_in_block = offset % s->block_size;
uint32_t bmap_entry = le32_to_cpu(s->bmap[bmap_index]);
- uint64_t offset;
int result;
- logout("%p, %" PRId64 ", %d, %p\n", bs, sector_num, nb_sectors, pnum);
- if (n_sectors > nb_sectors) {
- n_sectors = nb_sectors;
- }
- *pnum = n_sectors;
+ logout("%p, %" PRId64 ", %" PRId64 ", %p\n", bs, offset, bytes, pnum);
+ *pnum = MIN(s->block_size - index_in_block, bytes);
result = VDI_IS_ALLOCATED(bmap_entry);
if (!result) {
return 0;
}
- offset = s->header.offset_data +
- (uint64_t)bmap_entry * s->block_size +
- sector_in_block * SECTOR_SIZE;
+ *map = s->header.offset_data + (uint64_t)bmap_entry * s->block_size +
+ index_in_block;
*file = bs->file->bs;
- return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | offset;
+ return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
}
static int coroutine_fn
@@ -902,7 +895,7 @@ static BlockDriver bdrv_vdi = {
.bdrv_child_perm = bdrv_format_default_perms,
.bdrv_create = vdi_create,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
- .bdrv_co_get_block_status = vdi_co_get_block_status,
+ .bdrv_co_block_status = vdi_co_block_status,
.bdrv_make_empty = vdi_make_empty,
.bdrv_co_preadv = vdi_co_preadv,
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 17/20] vmdk: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (15 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 16/20] vdi: Switch to .bdrv_co_block_status() Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 18/20] vpc: " Eric Blake
` (4 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, famz, jcody, qemu-block, vsementsov, Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the vmdk driver accordingly. Drop the
now-unused vmdk_find_index_in_cluster().
Also, fix a pre-existing bug: if find_extent() fails (unlikely,
since the block layer did a bounds check), then we must return a
failure, rather than 0.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v6-v7: no change
v5: drop dead code [Vladimir], return error on find_extent() failure
v4: rebase to interface tweak
v3: no change
v2: rebase to mapping flag
---
block/vmdk.c | 38 ++++++++++++++------------------------
1 file changed, 14 insertions(+), 24 deletions(-)
diff --git a/block/vmdk.c b/block/vmdk.c
index c665bcc977..8ae36e7a45 100644
--- a/block/vmdk.c
+++ b/block/vmdk.c
@@ -1295,33 +1295,27 @@ static inline uint64_t vmdk_find_offset_in_cluster(VmdkExtent *extent,
return extent_relative_offset % cluster_size;
}
-static inline uint64_t vmdk_find_index_in_cluster(VmdkExtent *extent,
- int64_t sector_num)
-{
- uint64_t offset;
- offset = vmdk_find_offset_in_cluster(extent, sector_num * BDRV_SECTOR_SIZE);
- return offset / BDRV_SECTOR_SIZE;
-}
-
-static int64_t coroutine_fn vmdk_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn vmdk_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset, int64_t bytes,
+ int64_t *pnum, int64_t *map,
+ BlockDriverState **file)
{
BDRVVmdkState *s = bs->opaque;
int64_t index_in_cluster, n, ret;
- uint64_t offset;
+ uint64_t cluster_offset;
VmdkExtent *extent;
- extent = find_extent(s, sector_num, NULL);
+ extent = find_extent(s, offset >> BDRV_SECTOR_BITS, NULL);
if (!extent) {
- return 0;
+ return -EIO;
}
qemu_co_mutex_lock(&s->lock);
- ret = get_cluster_offset(bs, extent, NULL,
- sector_num * 512, false, &offset,
+ ret = get_cluster_offset(bs, extent, NULL, offset, false, &cluster_offset,
0, 0);
qemu_co_mutex_unlock(&s->lock);
- index_in_cluster = vmdk_find_index_in_cluster(extent, sector_num);
+ index_in_cluster = vmdk_find_offset_in_cluster(extent, offset);
switch (ret) {
case VMDK_ERROR:
ret = -EIO;
@@ -1336,18 +1330,14 @@ static int64_t coroutine_fn vmdk_co_get_block_status(BlockDriverState *bs,
ret = BDRV_BLOCK_DATA;
if (!extent->compressed) {
ret |= BDRV_BLOCK_OFFSET_VALID;
- ret |= (offset + (index_in_cluster << BDRV_SECTOR_BITS))
- & BDRV_BLOCK_OFFSET_MASK;
+ *map = cluster_offset + index_in_cluster;
}
*file = extent->file->bs;
break;
}
- n = extent->cluster_sectors - index_in_cluster;
- if (n > nb_sectors) {
- n = nb_sectors;
- }
- *pnum = n;
+ n = extent->cluster_sectors * BDRV_SECTOR_SIZE - index_in_cluster;
+ *pnum = MIN(n, bytes);
return ret;
}
@@ -2393,7 +2383,7 @@ static BlockDriver bdrv_vmdk = {
.bdrv_close = vmdk_close,
.bdrv_create = vmdk_create,
.bdrv_co_flush_to_disk = vmdk_co_flush,
- .bdrv_co_get_block_status = vmdk_co_get_block_status,
+ .bdrv_co_block_status = vmdk_co_block_status,
.bdrv_get_allocated_file_size = vmdk_get_allocated_file_size,
.bdrv_has_zero_init = vmdk_has_zero_init,
.bdrv_get_specific_info = vmdk_get_specific_info,
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 18/20] vpc: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (16 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 17/20] vmdk: " Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-08 8:14 ` Fam Zheng
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 19/20] vvfat: " Eric Blake
` (3 subsequent siblings)
21 siblings, 1 reply; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, famz, jcody, qemu-block, vsementsov, Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the vpc driver accordingly.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
v7: tweak commit message and type of 'n' [Fam]
v6: no change
v5: fix incorrect rounding in 'map' and bad loop condition [Vladimir]
v4: rebase to interface tweak
v3: rebase to master
v2: drop get_sector_offset() [Kevin], rebase to mapping flag
---
block/vpc.c | 45 +++++++++++++++++++++++----------------------
1 file changed, 23 insertions(+), 22 deletions(-)
diff --git a/block/vpc.c b/block/vpc.c
index 1576d7b595..97011febd3 100644
--- a/block/vpc.c
+++ b/block/vpc.c
@@ -705,53 +705,54 @@ fail:
return ret;
}
-static int64_t coroutine_fn vpc_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn vpc_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset, int64_t bytes,
+ int64_t *pnum, int64_t *map,
+ BlockDriverState **file)
{
BDRVVPCState *s = bs->opaque;
VHDFooter *footer = (VHDFooter*) s->footer_buf;
- int64_t start, offset;
+ int64_t image_offset;
bool allocated;
- int64_t ret;
- int n;
+ int ret;
+ int64_t n;
if (be32_to_cpu(footer->type) == VHD_FIXED) {
- *pnum = nb_sectors;
+ *pnum = bytes;
+ *map = offset;
*file = bs->file->bs;
- return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID |
- (sector_num << BDRV_SECTOR_BITS);
+ return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID;
}
qemu_co_mutex_lock(&s->lock);
- offset = get_image_offset(bs, sector_num << BDRV_SECTOR_BITS, false, NULL);
- start = offset;
- allocated = (offset != -1);
+ image_offset = get_image_offset(bs, offset, false, NULL);
+ allocated = (image_offset != -1);
*pnum = 0;
ret = 0;
do {
/* All sectors in a block are contiguous (without using the bitmap) */
- n = ROUND_UP(sector_num + 1, s->block_size / BDRV_SECTOR_SIZE)
- - sector_num;
- n = MIN(n, nb_sectors);
+ n = ROUND_UP(offset + 1, s->block_size) - offset;
+ n = MIN(n, bytes);
*pnum += n;
- sector_num += n;
- nb_sectors -= n;
+ offset += n;
+ bytes -= n;
/* *pnum can't be greater than one block for allocated
* sectors since there is always a bitmap in between. */
if (allocated) {
*file = bs->file->bs;
- ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | start;
+ *map = image_offset;
+ ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
break;
}
- if (nb_sectors == 0) {
+ if (bytes == 0) {
break;
}
- offset = get_image_offset(bs, sector_num << BDRV_SECTOR_BITS, false,
- NULL);
- } while (offset == -1);
+ image_offset = get_image_offset(bs, offset, false, NULL);
+ } while (image_offset == -1);
qemu_co_mutex_unlock(&s->lock);
return ret;
@@ -1097,7 +1098,7 @@ static BlockDriver bdrv_vpc = {
.bdrv_co_preadv = vpc_co_preadv,
.bdrv_co_pwritev = vpc_co_pwritev,
- .bdrv_co_get_block_status = vpc_co_get_block_status,
+ .bdrv_co_block_status = vpc_co_block_status,
.bdrv_get_info = vpc_get_info,
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 19/20] vvfat: Switch to .bdrv_co_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (17 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 18/20] vpc: " Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 20/20] block: Drop unused .bdrv_co_get_block_status() Eric Blake
` (2 subsequent siblings)
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, famz, jcody, qemu-block, vsementsov, Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the vvfat driver accordingly. Note that we
can rely on the block driver having already clamped limits to our
block size, and simplify accordingly.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v5-v7: no change
v4: rebase to interface tweak
v3: no change
v2: rebase to earlier changes, simplify
---
block/vvfat.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/block/vvfat.c b/block/vvfat.c
index a690595f2c..37d85a389f 100644
--- a/block/vvfat.c
+++ b/block/vvfat.c
@@ -3086,15 +3086,13 @@ vvfat_co_pwritev(BlockDriverState *bs, uint64_t offset, uint64_t bytes,
return ret;
}
-static int64_t coroutine_fn vvfat_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, int *n, BlockDriverState **file)
+static int coroutine_fn vvfat_co_block_status(BlockDriverState *bs,
+ bool want_zero, int64_t offset,
+ int64_t bytes, int64_t *n,
+ int64_t *map,
+ BlockDriverState **file)
{
- *n = bs->total_sectors - sector_num;
- if (*n > nb_sectors) {
- *n = nb_sectors;
- } else if (*n < 0) {
- return 0;
- }
+ *n = bytes;
return BDRV_BLOCK_DATA;
}
@@ -3255,7 +3253,7 @@ static BlockDriver bdrv_vvfat = {
.bdrv_co_preadv = vvfat_co_preadv,
.bdrv_co_pwritev = vvfat_co_pwritev,
- .bdrv_co_get_block_status = vvfat_co_get_block_status,
+ .bdrv_co_block_status = vvfat_co_block_status,
};
static void bdrv_vvfat_init(void)
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH v7 20/20] block: Drop unused .bdrv_co_get_block_status()
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (18 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 19/20] vvfat: " Eric Blake
@ 2018-01-05 22:57 ` Eric Blake
2018-01-07 6:03 ` [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks no-reply
2018-01-29 20:11 ` Eric Blake
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-05 22:57 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, famz, jcody, qemu-block, vsementsov, Stefan Hajnoczi,
Max Reitz
We are gradually moving away from sector-based interfaces, towards
byte-based. Now that all drivers have been updated to provide the
byte-based .bdrv_co_block_status(), we can delete the sector-based
interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v7: no change
v6: rebase to changes in patch 1, drop R-b
v5: rebase to master
v4: rebase to interface tweak
v3: no change
v2: rebase to earlier changes
---
include/block/block_int.h | 3 ---
block/io.c | 50 ++++++++++-------------------------------------
2 files changed, 10 insertions(+), 43 deletions(-)
diff --git a/include/block/block_int.h b/include/block/block_int.h
index d4509a2711..f019af7dbc 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -217,9 +217,6 @@ struct BlockDriver {
* as well as non-NULL pnum, map, and file; in turn, the driver
* must return an error or set pnum to an aligned non-zero value.
*/
- int64_t coroutine_fn (*bdrv_co_get_block_status)(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, int *pnum,
- BlockDriverState **file);
int coroutine_fn (*bdrv_co_block_status)(BlockDriverState *bs,
bool want_zero, int64_t offset, int64_t bytes, int64_t *pnum,
int64_t *map, BlockDriverState **file);
diff --git a/block/io.c b/block/io.c
index 087cb89b86..23af7eff20 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1963,7 +1963,7 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
/* Must be non-NULL or bdrv_getlength() would have failed */
assert(bs->drv);
- if (!bs->drv->bdrv_co_get_block_status && !bs->drv->bdrv_co_block_status) {
+ if (!bs->drv->bdrv_co_block_status) {
*pnum = bytes;
ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
if (offset + bytes == total_size) {
@@ -1981,53 +1981,23 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
/* Round out to request_alignment boundaries */
align = bs->bl.request_alignment;
- if (bs->drv->bdrv_co_get_block_status && align < BDRV_SECTOR_SIZE) {
- align = BDRV_SECTOR_SIZE;
- }
aligned_offset = QEMU_ALIGN_DOWN(offset, align);
aligned_bytes = ROUND_UP(offset + bytes, align) - aligned_offset;
- if (bs->drv->bdrv_co_get_block_status) {
- int count; /* sectors */
- int64_t longret;
-
- assert(QEMU_IS_ALIGNED(aligned_offset | aligned_bytes,
- BDRV_SECTOR_SIZE));
- /*
- * The contract allows us to return pnum smaller than bytes, even
- * if the next query would see the same status; we truncate the
- * request to avoid overflowing the driver's 32-bit interface.
- */
- longret = bs->drv->bdrv_co_get_block_status(
- bs, aligned_offset >> BDRV_SECTOR_BITS,
- MIN(INT_MAX, aligned_bytes) >> BDRV_SECTOR_BITS, &count,
- &local_file);
- if (longret < 0) {
- assert(INT_MIN <= longret);
- ret = longret;
- goto out;
- }
- if (longret & BDRV_BLOCK_OFFSET_VALID) {
- local_map = longret & BDRV_BLOCK_OFFSET_MASK;
- }
- ret = longret & ~BDRV_BLOCK_OFFSET_MASK;
- *pnum = count * BDRV_SECTOR_SIZE;
- } else {
- ret = bs->drv->bdrv_co_block_status(bs, want_zero, aligned_offset,
- aligned_bytes, pnum, &local_map,
- &local_file);
- if (ret < 0) {
- *pnum = 0;
- goto out;
- }
- assert(*pnum); /* The block driver must make progress */
+ ret = bs->drv->bdrv_co_block_status(bs, want_zero, aligned_offset,
+ aligned_bytes, pnum, &local_map,
+ &local_file);
+ if (ret < 0) {
+ *pnum = 0;
+ goto out;
}
/*
- * The driver's result must be a multiple of request_alignment.
+ * The driver's result must be a non-zero multiple of request_alignment.
* Clamp pnum and adjust map to original request.
*/
- assert(QEMU_IS_ALIGNED(*pnum, align) && align > offset - aligned_offset);
+ assert(*pnum && QEMU_IS_ALIGNED(*pnum, align) &&
+ align > offset - aligned_offset);
*pnum -= offset - aligned_offset;
if (*pnum > bytes) {
*pnum = bytes;
--
2.14.3
^ permalink raw reply related [flat|nested] 29+ messages in thread* Re: [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (19 preceding siblings ...)
2018-01-05 22:57 ` [Qemu-devel] [PATCH v7 20/20] block: Drop unused .bdrv_co_get_block_status() Eric Blake
@ 2018-01-07 6:03 ` no-reply
2018-01-08 2:56 ` Fam Zheng
2018-01-29 20:11 ` Eric Blake
21 siblings, 1 reply; 29+ messages in thread
From: no-reply @ 2018-01-07 6:03 UTC (permalink / raw)
To: eblake; +Cc: famz, qemu-devel, kwolf, jcody, vsementsov
Hi,
This series failed build test on s390x host. Please find the details below.
Type: series
Message-id: 20180105225753.30509-1-eblake@redhat.com
Subject: [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks
=== TEST SCRIPT BEGIN ===
#!/bin/bash
# Testing script will be invoked under the git checkout with
# HEAD pointing to a commit that has the patches applied on top of "base"
# branch
set -e
echo "=== ENV ==="
env
echo "=== PACKAGES ==="
rpm -qa
echo "=== TEST BEGIN ==="
CC=$HOME/bin/cc
INSTALL=$PWD/install
BUILD=$PWD/build
echo -n "Using CC: "
realpath $CC
mkdir -p $BUILD $INSTALL
SRC=$PWD
cd $BUILD
$SRC/configure --cc=$CC --prefix=$INSTALL
make -j4
# XXX: we need reliable clean up
# make check -j4 V=1
make install
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
585e5b35cc block: Drop unused .bdrv_co_get_block_status()
c5ccc86da3 vvfat: Switch to .bdrv_co_block_status()
e3c98d2e60 vpc: Switch to .bdrv_co_block_status()
3eefdb6d61 vmdk: Switch to .bdrv_co_block_status()
cd52e7a4f3 vdi: Switch to .bdrv_co_block_status()
a17638db38 vdi: Avoid bitrot of debugging code
23f83984c5 sheepdog: Switch to .bdrv_co_block_status()
4411fddff1 raw: Switch to .bdrv_co_block_status()
0223444c76 qed: Switch to .bdrv_co_block_status()
39d8ceef87 qcow2: Switch to .bdrv_co_block_status()
58872d167c qcow: Switch to .bdrv_co_block_status()
cbfa34d79a parallels: Switch to .bdrv_co_block_status()
a334cc5164 null: Switch to .bdrv_co_block_status()
20cc681f63 iscsi: Switch to .bdrv_co_block_status()
2ec228ec62 iscsi: Switch iscsi_allocmap_update() to byte-based
536ee7f45a iscsi: Switch cluster_sectors to byte-based
6cc4d83f3c gluster: Switch to .bdrv_co_block_status()
98fbcc7fd8 file-posix: Switch to .bdrv_co_block_status()
5b4a250849 block: Switch passthrough drivers to .bdrv_co_block_status()
b928d30bef block: Add .bdrv_co_block_status() callback
=== OUTPUT BEGIN ===
=== ENV ===
LANG=en_US.UTF-8
XDG_SESSION_ID=7
USER=fam
PWD=/var/tmp/patchew-tester-tmp-zu_flv2_/src
HOME=/home/fam
SHELL=/bin/sh
SHLVL=2
PATCHEW=/home/fam/patchew/patchew-cli -s http://patchew.org --nodebug
LOGNAME=fam
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1012/bus
XDG_RUNTIME_DIR=/run/user/1012
PATH=/usr/bin:/bin
_=/usr/bin/env
=== PACKAGES ===
gpg-pubkey-873529b8-54e386ff
glibc-debuginfo-common-2.24-10.fc25.s390x
fedora-release-26-1.noarch
dejavu-sans-mono-fonts-2.35-4.fc26.noarch
xemacs-filesystem-21.5.34-22.20170124hgf412e9f093d4.fc26.noarch
bash-4.4.12-7.fc26.s390x
freetype-2.7.1-9.fc26.s390x
libSM-1.2.2-5.fc26.s390x
libmpc-1.0.2-6.fc26.s390x
libaio-0.3.110-7.fc26.s390x
libverto-0.2.6-7.fc26.s390x
perl-Scalar-List-Utils-1.48-1.fc26.s390x
iptables-libs-1.6.1-2.fc26.s390x
perl-threads-shared-1.57-1.fc26.s390x
p11-kit-trust-0.23.9-2.fc26.s390x
tcl-8.6.6-2.fc26.s390x
libxshmfence-1.2-4.fc26.s390x
expect-5.45-23.fc26.s390x
perl-Thread-Queue-3.12-1.fc26.noarch
perl-encoding-2.19-6.fc26.s390x
keyutils-1.5.10-1.fc26.s390x
gmp-devel-6.1.2-4.fc26.s390x
enchant-1.6.0-16.fc26.s390x
net-snmp-libs-5.7.3-17.fc26.s390x
python-gobject-base-3.24.1-1.fc26.s390x
python3-distro-1.0.3-1.fc26.noarch
python3-enchant-1.6.10-1.fc26.noarch
python-lockfile-0.11.0-6.fc26.noarch
python2-pyparsing-2.1.10-3.fc26.noarch
python2-lxml-4.1.1-1.fc26.s390x
librados2-10.2.7-2.fc26.s390x
trousers-lib-0.3.13-7.fc26.s390x
libpaper-1.1.24-14.fc26.s390x
libdatrie-0.2.9-4.fc26.s390x
libsoup-2.58.2-1.fc26.s390x
passwd-0.79-9.fc26.s390x
bind99-libs-9.9.10-3.P3.fc26.s390x
python3-rpm-4.13.0.2-1.fc26.s390x
mock-core-configs-27.4-1.fc26.noarch
systemd-233-7.fc26.s390x
virglrenderer-0.6.0-1.20170210git76b3da97b.fc26.s390x
s390utils-ziomon-1.36.1-3.fc26.s390x
s390utils-osasnmpd-1.36.1-3.fc26.s390x
libXrandr-1.5.1-2.fc26.s390x
libglvnd-glx-1.0.0-1.fc26.s390x
texlive-ifxetex-svn19685.0.5-33.fc26.2.noarch
texlive-psnfss-svn33946.9.2a-33.fc26.2.noarch
texlive-dvipdfmx-def-svn40328-33.fc26.2.noarch
texlive-natbib-svn20668.8.31b-33.fc26.2.noarch
texlive-xdvi-bin-svn40750-33.20160520.fc26.2.s390x
texlive-cm-svn32865.0-33.fc26.2.noarch
texlive-beton-svn15878.0-33.fc26.2.noarch
texlive-fpl-svn15878.1.002-33.fc26.2.noarch
texlive-mflogo-svn38628-33.fc26.2.noarch
texlive-texlive-docindex-svn41430-33.fc26.2.noarch
texlive-luaotfload-bin-svn34647.0-33.20160520.fc26.2.noarch
texlive-koma-script-svn41508-33.fc26.2.noarch
texlive-pst-tree-svn24142.1.12-33.fc26.2.noarch
texlive-breqn-svn38099.0.98d-33.fc26.2.noarch
texlive-xetex-svn41438-33.fc26.2.noarch
gstreamer1-plugins-bad-free-1.12.3-1.fc26.s390x
xorg-x11-font-utils-7.5-33.fc26.s390x
ghostscript-fonts-5.50-36.fc26.noarch
libXext-devel-1.3.3-5.fc26.s390x
libusbx-devel-1.0.21-2.fc26.s390x
libglvnd-devel-1.0.0-1.fc26.s390x
emacs-25.3-3.fc26.s390x
alsa-lib-devel-1.1.4.1-1.fc26.s390x
kbd-2.0.4-2.fc26.s390x
dconf-0.26.0-2.fc26.s390x
ccache-3.3.4-1.fc26.s390x
glibc-static-2.25-12.fc26.s390x
mc-4.8.19-5.fc26.s390x
doxygen-1.8.13-9.fc26.s390x
dpkg-1.18.24-1.fc26.s390x
libtdb-1.3.13-1.fc26.s390x
python2-pynacl-1.1.1-1.fc26.s390x
nss-sysinit-3.34.0-1.0.fc26.s390x
kernel-4.13.16-202.fc26.s390x
perl-Filter-1.58-1.fc26.s390x
python2-pip-9.0.1-11.fc26.noarch
dnf-2.7.5-2.fc26.noarch
pcre2-utf16-10.23-11.fc26.s390x
glusterfs-devel-3.10.8-1.fc26.s390x
sssd-common-1.16.0-4.fc26.s390x
python2-sssdconfig-1.16.0-4.fc26.noarch
acpica-tools-20171110-1.fc26.s390x
glibc-debuginfo-2.24-10.fc25.s390x
fedora-repos-26-1.noarch
dejavu-fonts-common-2.35-4.fc26.noarch
bind99-license-9.9.10-3.P3.fc26.noarch
ncurses-libs-6.0-8.20170212.fc26.s390x
libpng-1.6.28-2.fc26.s390x
libICE-1.0.9-9.fc26.s390x
kmod-24-1.fc26.s390x
libseccomp-2.3.2-1.fc26.s390x
perl-Text-ParseWords-3.30-366.fc26.noarch
libtool-ltdl-2.4.6-17.fc26.s390x
perl-threads-2.16-1.fc26.s390x
libselinux-utils-2.6-7.fc26.s390x
userspace-rcu-0.9.3-2.fc26.s390x
libXfont-1.5.2-5.fc26.s390x
perl-Class-Inspector-1.31-3.fc26.noarch
perl-open-1.10-395.fc26.noarch
keyutils-libs-devel-1.5.10-1.fc26.s390x
isl-0.16.1-1.fc26.s390x
libsecret-0.18.5-3.fc26.s390x
compat-openssl10-1.0.2m-1.fc26.s390x
python3-iniparse-0.4-24.fc26.noarch
python3-dateutil-2.6.0-3.fc26.noarch
python3-firewall-0.4.4.5-1.fc26.noarch
python-enum34-1.1.6-1.fc26.noarch
python2-pygments-2.2.0-7.fc26.noarch
python2-dockerfile-parse-0.0.7-1.fc26.noarch
perl-Net-SSLeay-1.81-1.fc26.s390x
hostname-3.18-2.fc26.s390x
libtirpc-1.0.2-0.fc26.s390x
rpm-build-libs-4.13.0.2-1.fc26.s390x
libutempter-1.1.6-9.fc26.s390x
systemd-pam-233-7.fc26.s390x
pcre-utf16-8.41-3.fc26.s390x
libXinerama-1.1.3-7.fc26.s390x
mesa-libGL-17.2.4-2.fc26.s390x
texlive-amsfonts-svn29208.3.04-33.fc26.2.noarch
texlive-caption-svn41409-33.fc26.2.noarch
texlive-enumitem-svn24146.3.5.2-33.fc26.2.noarch
texlive-pdftex-def-svn22653.0.06d-33.fc26.2.noarch
texlive-xdvi-svn40768-33.fc26.2.noarch
texlive-courier-svn35058.0-33.fc26.2.noarch
texlive-charter-svn15878.0-33.fc26.2.noarch
texlive-graphics-def-svn41879-33.fc26.2.noarch
texlive-mfnfss-svn19410.0-33.fc26.2.noarch
texlive-texlive-en-svn41185-33.fc26.2.noarch
texlive-ifplatform-svn21156.0.4-33.fc26.2.noarch
texlive-ms-svn29849.0-33.fc26.2.noarch
texlive-pst-tools-svn34067.0.05-33.fc26.2.noarch
texlive-powerdot-svn38984-33.fc26.2.noarch
texlive-xetexconfig-svn41133-33.fc26.2.noarch
libvdpau-1.1.1-4.fc26.s390x
zlib-devel-1.2.11-2.fc26.s390x
gdk-pixbuf2-devel-2.36.9-1.fc26.s390x
libX11-devel-1.6.5-2.fc26.s390x
libtasn1-devel-4.12-1.fc26.s390x
libglvnd-core-devel-1.0.0-1.fc26.s390x
SDL2-devel-2.0.7-2.fc26.s390x
webkitgtk3-2.4.11-5.fc26.s390x
grubby-8.40-4.fc26.s390x
uboot-tools-2017.05-4.fc26.s390x
cracklib-dicts-2.9.6-5.fc26.s390x
texinfo-6.3-3.fc26.s390x
time-1.7-52.fc26.s390x
python2-deltarpm-3.6-19.fc26.s390x
nss-3.34.0-1.0.fc26.s390x
webkitgtk4-2.18.3-1.fc26.s390x
net-tools-2.0-0.43.20160912git.fc26.s390x
python2-setuptools-37.0.0-1.fc26.noarch
python2-dnf-2.7.5-2.fc26.noarch
pcre2-10.23-11.fc26.s390x
groff-base-1.22.3-10.fc26.s390x
python2-devel-2.7.14-4.fc26.s390x
python2-GitPython-2.1.7-2.fc26.noarch
boost-iostreams-1.63.0-10.fc26.s390x
gpg-pubkey-efe550f5-5220ba41
gpg-pubkey-81b46521-55b3ca9a
filesystem-3.2-40.fc26.s390x
basesystem-11-3.fc26.noarch
js-jquery-3.2.1-1.fc26.noarch
pcre-8.41-3.fc26.s390x
elfutils-libelf-0.169-1.fc26.s390x
libidn-1.33-2.fc26.s390x
libogg-1.3.2-6.fc26.s390x
slang-2.3.1a-2.fc26.s390x
apr-1.6.3-1.fc26.s390x
libxkbcommon-0.7.1-3.fc26.s390x
perl-IO-1.36-395.fc26.s390x
libvorbis-1.3.5-2.fc26.s390x
less-487-3.fc26.s390x
lttng-ust-2.9.0-2.fc26.s390x
OpenEXR-libs-2.2.0-6.fc26.s390x
ipset-libs-6.29-3.fc26.s390x
perl-XML-XPath-1.42-1.fc26.noarch
lua-filesystem-1.6.3-3.fc24.s390x
sqlite-3.20.1-1.fc26.s390x
gstreamer1-1.12.3-1.fc26.s390x
libpwquality-1.3.0-8.fc26.s390x
gettext-libs-0.19.8.1-9.fc26.s390x
python3-chardet-2.3.0-3.fc26.noarch
python3-slip-dbus-0.6.4-6.fc26.noarch
python-chardet-2.3.0-3.fc26.noarch
python2-pyasn1-0.2.3-1.fc26.noarch
python-slip-dbus-0.6.4-6.fc26.noarch
libarchive-3.2.2-4.fc26.s390x
libbabeltrace-1.5.2-2.fc26.s390x
cdparanoia-libs-10.2-22.fc26.s390x
krb5-workstation-1.15.2-4.fc26.s390x
python3-requests-kerberos-0.10.0-4.fc26.noarch
gpgme-1.8.0-12.fc26.s390x
python2-gpg-1.8.0-12.fc26.s390x
shadow-utils-4.3.1-3.fc26.s390x
cryptsetup-libs-1.7.5-1.fc26.s390x
kpartx-0.4.9-88.fc26.s390x
net-snmp-agent-libs-5.7.3-17.fc26.s390x
libXi-1.7.9-2.fc26.s390x
texlive-tetex-svn41059-33.fc26.2.noarch
texlive-tools-svn40934-33.fc26.2.noarch
texlive-bibtex-bin-svn40473-33.20160520.fc26.2.s390x
texlive-mfware-bin-svn40473-33.20160520.fc26.2.s390x
texlive-underscore-svn18261.0-33.fc26.2.noarch
texlive-avantgar-svn31835.0-33.fc26.2.noarch
texlive-anysize-svn15878.0-33.fc26.2.noarch
texlive-lineno-svn21442.4.41-33.fc26.2.noarch
texlive-mathpazo-svn15878.1.003-33.fc26.2.noarch
texlive-soul-svn15878.2.4-33.fc26.2.noarch
texlive-luatexbase-svn38550-33.fc26.2.noarch
texlive-listings-svn37534.1.6-33.fc26.2.noarch
texlive-pstricks-svn41321-33.fc26.2.noarch
texlive-metalogo-svn18611.0.12-33.fc26.2.noarch
texlive-dvipdfmx-svn41149-33.fc26.2.noarch
kbd-legacy-2.0.4-2.fc26.noarch
nspr-devel-4.17.0-1.fc26.s390x
ghostscript-x11-9.20-10.fc26.s390x
libXrender-devel-0.9.10-2.fc26.s390x
libxkbcommon-devel-0.7.1-3.fc26.s390x
mesa-libGL-devel-17.2.4-2.fc26.s390x
sqlite-devel-3.20.1-1.fc26.s390x
usbredir-devel-0.7.1-3.fc26.s390x
libcap-devel-2.25-5.fc26.s390x
brlapi-devel-0.6.6-5.fc26.s390x
fedora-upgrade-27.1-1.fc26.noarch
python3-pygpgme-0.3-22.fc26.s390x
pinentry-0.9.7-3.fc26.s390x
perl-Test-Harness-3.39-1.fc26.noarch
qemu-sanity-check-nodeps-1.1.5-6.fc26.s390x
libldb-1.1.29-5.fc26.s390x
python-libxml2-2.9.4-2.fc26.s390x
nss-util-devel-3.34.0-1.0.fc26.s390x
vim-filesystem-8.0.1360-1.fc26.s390x
webkitgtk4-plugin-process-gtk2-2.18.3-1.fc26.s390x
python2-2.7.14-4.fc26.s390x
libwayland-cursor-1.13.0-3.fc26.s390x
mariadb-config-10.1.29-1.fc26.s390x
gdb-headless-8.0.1-33.fc26.s390x
pulseaudio-libs-devel-11.1-7.fc26.s390x
curl-7.53.1-13.fc26.s390x
json-c-0.12.1-5.fc26.s390x
gpg-pubkey-34ec9cba-54e38751
gpg-pubkey-030d5aed-55b577f0
setup-2.10.5-2.fc26.noarch
lato-fonts-2.015-3.fc26.noarch
web-assets-filesystem-5-5.fc26.noarch
libsepol-2.6-2.fc26.s390x
libcap-2.25-5.fc26.s390x
tcp_wrappers-libs-7.6-85.fc26.s390x
libnl3-3.3.0-1.fc26.s390x
pixman-0.34.0-3.fc26.s390x
lzo-2.08-9.fc26.s390x
perl-5.24.3-395.fc26.s390x
libnl3-cli-3.3.0-1.fc26.s390x
gpm-libs-1.20.7-10.fc26.s390x
libgo-7.2.1-2.fc26.s390x
iso-codes-3.74-2.fc26.noarch
ipset-6.29-3.fc26.s390x
lua-term-0.07-1.fc25.s390x
libdb-utils-5.3.28-24.fc26.s390x
system-python-libs-3.6.3-2.fc26.s390x
dbus-glib-0.108-2.fc26.s390x
pam-1.3.0-2.fc26.s390x
avahi-glib-0.6.32-7.fc26.s390x
python2-dateutil-2.6.0-3.fc26.noarch
python3-asn1crypto-0.23.0-1.fc26.noarch
python3-slip-0.6.4-6.fc26.noarch
python-backports-ssl_match_hostname-3.5.0.1-4.fc26.noarch
python2-pyOpenSSL-16.2.0-6.fc26.noarch
python-slip-0.6.4-6.fc26.noarch
nss-pem-1.0.3-3.fc26.s390x
fipscheck-1.5.0-1.fc26.s390x
elfutils-0.169-1.fc26.s390x
cyrus-sasl-lib-2.1.26-32.fc26.s390x
libkadm5-1.15.2-4.fc26.s390x
python3-kerberos-1.2.5-3.fc26.s390x
rpmconf-1.0.19-1.fc26.noarch
libsemanage-2.6-4.fc26.s390x
device-mapper-libs-1.02.137-6.fc26.s390x
yum-3.4.3-512.fc26.noarch
device-mapper-multipath-0.4.9-88.fc26.s390x
net-snmp-5.7.3-17.fc26.s390x
libXtst-1.2.3-2.fc26.s390x
libXxf86vm-1.1.4-4.fc26.s390x
texlive-amsmath-svn41561-33.fc26.2.noarch
texlive-xkeyval-svn35741.2.7a-33.fc26.2.noarch
texlive-bibtex-svn40768-33.fc26.2.noarch
texlive-mfware-svn40768-33.fc26.2.noarch
texlive-wasy-svn35831.0-33.fc26.2.noarch
texlive-bookman-svn31835.0-33.fc26.2.noarch
texlive-babel-english-svn30264.3.3p-33.fc26.2.noarch
texlive-fix2col-svn38770-33.fc26.2.noarch
texlive-mdwtools-svn15878.1.05.4-33.fc26.2.noarch
texlive-tex-gyre-math-svn41264-33.fc26.2.noarch
texlive-luaotfload-svn40902-33.fc26.2.noarch
texlive-showexpl-svn32737.v0.3l-33.fc26.2.noarch
texlive-pstricks-add-svn40744-33.fc26.2.noarch
texlive-l3experimental-svn41163-33.fc26.2.noarch
texlive-xetex-bin-svn41091-33.20160520.fc26.2.s390x
kbd-misc-2.0.4-2.fc26.noarch
libpng-devel-1.6.28-2.fc26.s390x
ghostscript-core-9.20-10.fc26.s390x
libXfixes-devel-5.0.3-2.fc26.s390x
libverto-devel-0.2.6-7.fc26.s390x
mesa-libEGL-devel-17.2.4-2.fc26.s390x
popt-devel-1.16-12.fc26.s390x
readline-devel-7.0-5.fc26.s390x
cyrus-sasl-devel-2.1.26-32.fc26.s390x
sendmail-8.15.2-19.fc26.s390x
systemd-bootchart-231-3.fc26.s390x
perl-IO-Socket-SSL-2.049-1.fc26.noarch
python2-enchant-1.6.10-1.fc26.noarch
perl-generators-1.10-2.fc26.noarch
createrepo-0.10.3-11.fc26.noarch
webkitgtk4-jsc-2.18.3-1.fc26.s390x
vim-common-8.0.1360-1.fc26.s390x
nss-tools-3.34.0-1.0.fc26.s390x
glusterfs-api-3.10.8-1.fc26.s390x
pulseaudio-libs-glib2-11.1-7.fc26.s390x
mariadb-common-10.1.29-1.fc26.s390x
dhcp-libs-4.3.5-10.fc26.s390x
pcre2-devel-10.23-11.fc26.s390x
libtiff-4.0.9-1.fc26.s390x
kernel-headers-4.14.8-200.fc26.s390x
fontpackages-filesystem-1.44-18.fc26.noarch
vte-profile-0.48.4-1.fc26.s390x
texlive-kpathsea-doc-svn41139-33.fc26.2.noarch
zlib-1.2.11-2.fc26.s390x
readline-7.0-5.fc26.s390x
libattr-2.4.47-18.fc26.s390x
libgomp-7.2.1-2.fc26.s390x
libglvnd-1.0.0-1.fc26.s390x
lz4-libs-1.8.0-1.fc26.s390x
libcrypt-nss-2.25-12.fc26.s390x
jansson-2.10-2.fc26.s390x
perl-File-Path-2.12-367.fc26.noarch
perl-Unicode-EastAsianWidth-1.33-9.fc26.noarch
hunspell-1.5.4-2.fc26.s390x
libasyncns-0.8-11.fc26.s390x
libnetfilter_conntrack-1.0.6-2.fc26.s390x
perl-Storable-2.56-368.fc26.s390x
autoconf-2.69-24.fc26.noarch
device-mapper-persistent-data-0.6.3-5.fc26.s390x
quota-4.03-9.fc26.s390x
crypto-policies-20170606-1.git7c32281.fc26.noarch
glib2-2.52.3-2.fc26.s390x
python2-idna-2.5-1.fc26.noarch
python2-libcomps-0.1.8-3.fc26.s390x
gsettings-desktop-schemas-3.24.1-1.fc26.s390x
javapackages-tools-4.7.0-17.fc26.noarch
libselinux-python3-2.6-7.fc26.s390x
python-backports-1.0-9.fc26.s390x
python2-cryptography-2.0.2-2.fc26.s390x
libselinux-python-2.6-7.fc26.s390x
Lmod-7.5.3-1.fc26.s390x
fipscheck-lib-1.5.0-1.fc26.s390x
elfutils-libs-0.169-1.fc26.s390x
krb5-libs-1.15.2-4.fc26.s390x
libuser-0.62-6.fc26.s390x
python2-requests-kerberos-0.10.0-4.fc26.noarch
npth-1.5-1.fc26.s390x
packagedb-cli-2.14.1-2.fc26.noarch
ustr-1.0.4-22.fc26.s390x
device-mapper-1.02.137-6.fc26.s390x
polkit-pkla-compat-0.1-8.fc26.s390x
fakeroot-1.22-1.fc26.s390x
libXmu-1.1.2-5.fc26.s390x
cairo-gobject-1.14.10-1.fc26.s390x
texlive-booktabs-svn40846-33.fc26.2.noarch
texlive-dvips-bin-svn40987-33.20160520.fc26.2.s390x
texlive-float-svn15878.1.3d-33.fc26.2.noarch
texlive-tex-svn40793-33.fc26.2.noarch
texlive-fancyref-svn15878.0.9c-33.fc26.2.noarch
texlive-manfnt-font-svn35799.0-33.fc26.2.noarch
texlive-cmap-svn41168-33.fc26.2.noarch
texlive-hyph-utf8-svn41189-33.fc26.2.noarch
texlive-paralist-svn39247-33.fc26.2.noarch
texlive-trimspaces-svn15878.1.1-33.fc26.2.noarch
texlive-tipa-svn29349.1.3-33.fc26.2.noarch
texlive-l3packages-svn41246-33.fc26.2.noarch
texlive-pst-pdf-svn31660.1.1v-33.fc26.2.noarch
texlive-tex-gyre-svn18651.2.004-33.fc26.2.noarch
texlive-beamer-svn36461.3.36-33.fc26.2.noarch
gd-2.2.5-1.fc26.s390x
elfutils-libelf-devel-0.169-1.fc26.s390x
gc-devel-7.6.0-2.fc26.s390x
libXft-devel-2.3.2-5.fc26.s390x
krb5-devel-1.15.2-4.fc26.s390x
rpm-devel-4.13.0.2-1.fc26.s390x
pcre-static-8.41-3.fc26.s390x
bluez-libs-devel-5.46-6.fc26.s390x
systemtap-3.2-2.fc26.s390x
trousers-0.3.13-7.fc26.s390x
iproute-tc-4.11.0-1.fc26.s390x
python2-sphinx-1.5.5-1.fc26.noarch
libgnome-keyring-3.12.0-8.fc26.s390x
perl-File-ShareDir-1.102-8.fc26.noarch
python2-paramiko-2.2.1-1.fc26.noarch
python2-openidc-client-0.4.0-1.20171113git54dee6e.fc26.noarch
openssh-server-7.5p1-4.fc26.s390x
pulseaudio-libs-11.1-7.fc26.s390x
python2-bodhi-2.12.2-3.fc26.noarch
lua-libs-5.3.4-7.fc26.s390x
dhcp-common-4.3.5-10.fc26.noarch
python3-pip-9.0.1-11.fc26.noarch
python3-sssdconfig-1.16.0-4.fc26.noarch
gpg-pubkey-95a43f54-5284415a
gpg-pubkey-fdb19c98-56fd6333
gpg-pubkey-64dab85d-57d33e22
tzdata-2017c-1.fc26.noarch
firewalld-filesystem-0.4.4.5-1.fc26.noarch
xkeyboard-config-2.21-3.fc26.noarch
texlive-texlive-common-doc-svn40682-33.fc26.2.noarch
ncurses-base-6.0-8.20170212.fc26.noarch
libselinux-2.6-7.fc26.s390x
bzip2-libs-1.0.6-22.fc26.s390x
libdb-5.3.28-24.fc26.s390x
mpfr-3.1.5-3.fc26.s390x
file-libs-5.30-11.fc26.s390x
libunistring-0.9.7-1.fc26.s390x
libxslt-1.1.29-1.fc26.s390x
libtasn1-4.12-1.fc26.s390x
gdbm-1.13-1.fc26.s390x
libepoxy-1.4.3-1.fc26.s390x
libpsl-0.18.0-1.fc26.s390x
perl-Carp-1.40-366.fc26.noarch
e2fsprogs-libs-1.43.4-2.fc26.s390x
libmnl-1.0.4-2.fc26.s390x
openjpeg2-2.2.0-3.fc26.s390x
perl-PathTools-3.63-367.fc26.s390x
perl-File-Temp-0.230.400-2.fc26.noarch
perl-XML-Parser-2.44-6.fc26.s390x
libss-1.43.4-2.fc26.s390x
ilmbase-2.2.0-8.fc26.s390x
fuse-libs-2.9.7-2.fc26.s390x
libdaemon-0.14-11.fc26.s390x
libbasicobjects-0.1.1-34.fc26.s390x
iptables-1.6.1-2.fc26.s390x
perl-TermReadKey-2.37-2.fc26.s390x
perl-Term-ANSIColor-4.06-2.fc26.noarch
perl-libintl-perl-1.26-2.fc26.s390x
usbredir-0.7.1-3.fc26.s390x
fftw-libs-double-3.3.5-4.fc26.s390x
rsync-3.1.2-5.fc26.s390x
libiscsi-1.15.0-3.fc26.s390x
ttmkfdir-3.0.9-49.fc26.s390x
texlive-base-2016-33.20160520.fc26.1.noarch
python2-six-1.10.0-9.fc26.noarch
atk-2.24.0-1.fc26.s390x
python2-kitchen-1.2.4-6.fc26.noarch
guile-2.0.14-1.fc26.s390x
desktop-file-utils-0.23-3.fc26.s390x
pyxattr-0.5.3-10.fc26.s390x
shared-mime-info-1.8-2.fc26.s390x
libyaml-0.1.7-2.fc26.s390x
python3-PyYAML-3.12-3.fc26.s390x
openssh-7.5p1-4.fc26.s390x
kernel-core-4.13.16-202.fc26.s390x
perl-Git-2.13.6-2.fc26.noarch
python3-dnf-plugins-extras-common-2.0.4-1.fc26.noarch
openssl-1.1.0g-1.fc26.s390x
gawk-4.1.4-6.fc26.s390x
gnutls-3.5.16-4.fc26.s390x
openldap-2.4.45-2.fc26.s390x
bind-license-9.11.1-4.P3.fc26.noarch
python2-gluster-3.10.8-1.fc26.s390x
selinux-policy-3.13.1-260.17.fc26.noarch
linux-firmware-20171215-81.git2451bb22.fc26.noarch
libpkgconf-1.3.12-1.fc26.s390x
NetworkManager-libnm-1.8.2-4.fc26.s390x
gnutls-devel-3.5.16-4.fc26.s390x
mariadb-libs-10.1.29-1.fc26.s390x
python2-urllib3-1.20-2.fc26.noarch
sssd-nfs-idmap-1.16.0-4.fc26.s390x
libsss_sudo-1.16.0-4.fc26.s390x
libgudev-232-1.fc26.s390x
python3-libs-3.6.3-2.fc26.s390x
python3-javapackages-4.7.0-17.fc26.noarch
python3-ply-3.9-3.fc26.noarch
python3-systemd-234-1.fc26.s390x
python3-requests-2.13.0-1.fc26.noarch
blktrace-1.1.0-4.fc26.s390x
python2-asn1crypto-0.23.0-1.fc26.noarch
python2-cffi-1.9.1-2.fc26.s390x
python2-sphinx_rtd_theme-0.2.4-1.fc26.noarch
lua-json-1.3.2-7.fc26.noarch
libcephfs1-10.2.7-2.fc26.s390x
glib-networking-2.50.0-2.fc26.s390x
elfutils-default-yama-scope-0.169-1.fc26.noarch
GeoIP-GeoLite-data-2017.10-1.fc26.noarch
libedit-3.1-17.20160618cvs.fc26.s390x
libverto-libev-0.2.6-7.fc26.s390x
libserf-1.3.9-3.fc26.s390x
createrepo_c-0.10.0-9.fc26.s390x
python2-kerberos-1.2.5-3.fc26.s390x
libsrtp-1.5.4-4.fc26.s390x
lzo-minilzo-2.08-9.fc26.s390x
librepo-1.8.0-1.fc26.s390x
koji-1.14.0-1.fc26.noarch
sg3_utils-1.42-1.fc26.s390x
libobjc-7.2.1-2.fc26.s390x
policycoreutils-2.6-6.fc26.s390x
libdrm-2.4.88-1.fc26.s390x
kernel-core-4.13.13-200.fc26.s390x
systemtap-client-3.2-2.fc26.s390x
lvm2-2.02.168-6.fc26.s390x
device-mapper-multipath-libs-0.4.9-88.fc26.s390x
libfdt-1.4.5-1.fc26.s390x
s390utils-cmsfs-1.36.1-3.fc26.s390x
libXdamage-1.1.4-9.fc26.s390x
libXaw-1.0.13-5.fc26.s390x
brltty-5.5-5.fc26.s390x
librsvg2-2.40.18-1.fc26.s390x
texlive-tetex-bin-svn36770.0-33.20160520.fc26.2.noarch
texlive-etex-pkg-svn39355-33.fc26.2.noarch
texlive-graphics-svn41015-33.fc26.2.noarch
texlive-dvips-svn41149-33.fc26.2.noarch
texlive-zapfding-svn31835.0-33.fc26.2.noarch
texlive-footmisc-svn23330.5.5b-33.fc26.2.noarch
texlive-makeindex-svn40768-33.fc26.2.noarch
texlive-pst-ovl-svn40873-33.fc26.2.noarch
texlive-texlive-scripts-svn41433-33.fc26.2.noarch
texlive-ltabptch-svn17533.1.74d-33.fc26.2.noarch
texlive-euro-svn22191.1.1-33.fc26.2.noarch
texlive-mflogo-font-svn36898.1.002-33.fc26.2.noarch
texlive-zapfchan-svn31835.0-33.fc26.2.noarch
texlive-cmextra-svn32831.0-33.fc26.2.noarch
texlive-finstrut-svn21719.0.5-33.fc26.2.noarch
texlive-hyphen-base-svn41138-33.fc26.2.noarch
texlive-marginnote-svn41382-33.fc26.2.noarch
texlive-parallel-svn15878.0-33.fc26.2.noarch
texlive-sepnum-svn20186.2.0-33.fc26.2.noarch
texlive-environ-svn33821.0.3-33.fc26.2.noarch
texlive-type1cm-svn21820.0-33.fc26.2.noarch
texlive-xunicode-svn30466.0.981-33.fc26.2.noarch
texlive-attachfile-svn38830-33.fc26.2.noarch
texlive-fontspec-svn41262-33.fc26.2.noarch
texlive-fancyvrb-svn18492.2.8-33.fc26.2.noarch
texlive-pst-pdf-bin-svn7838.0-33.20160520.fc26.2.noarch
texlive-xcolor-svn41044-33.fc26.2.noarch
texlive-pdfpages-svn40638-33.fc26.2.noarch
texlive-sansmathaccent-svn30187.0-33.fc26.2.noarch
texlive-ucs-svn35853.2.2-33.fc26.2.noarch
texlive-dvipdfmx-bin-svn40273-33.20160520.fc26.2.s390x
libotf-0.9.13-8.fc26.s390x
go-srpm-macros-2-8.fc26.noarch
pcre-devel-8.41-3.fc26.s390x
mesa-libwayland-egl-devel-17.2.4-2.fc26.s390x
ghostscript-9.20-10.fc26.s390x
libcephfs_jni-devel-10.2.7-2.fc26.s390x
libXdamage-devel-1.1.4-9.fc26.s390x
freetype-devel-2.7.1-9.fc26.s390x
ncurses-devel-6.0-8.20170212.fc26.s390x
fontconfig-devel-2.12.6-4.fc26.s390x
cairo-devel-1.14.10-1.fc26.s390x
libselinux-devel-2.6-7.fc26.s390x
guile-devel-2.0.14-1.fc26.s390x
libcap-ng-devel-0.7.8-3.fc26.s390x
bash-completion-2.6-1.fc26.noarch
libXevie-1.0.3-12.fc26.s390x
kernel-4.13.13-200.fc26.s390x
audit-2.8.1-1.fc26.s390x
gcc-objc-7.2.1-2.fc26.s390x
gcc-go-7.2.1-2.fc26.s390x
python-firewall-0.4.4.5-1.fc26.noarch
python3-html5lib-0.999-13.fc26.noarch
python2-simplejson-3.10.0-3.fc26.s390x
flex-2.6.1-3.fc26.s390x
telnet-0.17-69.fc26.s390x
gpg-pubkey-8e1431d5-53bcbac7
emacs-filesystem-25.3-3.fc26.noarch
fontawesome-fonts-4.7.0-2.fc26.noarch
fontawesome-fonts-web-4.7.0-2.fc26.noarch
tzdata-java-2017c-1.fc26.noarch
rpmconf-base-1.0.19-1.fc26.noarch
glibc-2.25-12.fc26.s390x
info-6.3-3.fc26.s390x
sqlite-libs-3.20.1-1.fc26.s390x
texlive-lib-2016-33.20160520.fc26.1.s390x
sed-4.4-1.fc26.s390x
libicu-57.1-7.fc26.s390x
libcap-ng-0.7.8-3.fc26.s390x
nettle-3.3-2.fc26.s390x
libidn2-2.0.4-1.fc26.s390x
lcms2-2.8-3.fc26.s390x
dbus-libs-1.11.18-1.fc26.s390x
perl-Exporter-5.72-367.fc26.noarch
unzip-6.0-34.fc26.s390x
iproute-4.11.0-1.fc26.s390x
zip-3.0-18.fc26.s390x
perl-constant-1.33-368.fc26.noarch
perl-MIME-Base64-3.15-366.fc26.s390x
lua-posix-33.3.1-4.fc26.s390x
bzip2-1.0.6-22.fc26.s390x
libstdc++-devel-7.2.1-2.fc26.s390x
hyphen-2.8.8-6.fc26.s390x
libdvdread-5.0.3-4.fc26.s390x
libcollection-0.7.0-34.fc26.s390x
libdvdnav-5.0.3-5.fc26.s390x
perl-version-0.99.18-1.fc26.s390x
perl-Encode-2.88-6.fc26.s390x
automake-1.15-9.fc26.noarch
plymouth-core-libs-0.9.3-0.7.20160620git0e65b86c.fc26.s390x
hesiod-3.2.1-7.fc26.s390x
jasper-libs-2.0.14-1.fc26.s390x
mozjs17-17.0.0-18.fc26.s390x
fontconfig-2.12.6-4.fc26.s390x
harfbuzz-1.4.4-1.fc26.s390x
alsa-lib-1.1.4.1-1.fc26.s390x
make-4.2.1-2.fc26.s390x
gobject-introspection-1.52.1-1.fc26.s390x
hicolor-icon-theme-0.15-5.fc26.noarch
gdk-pixbuf2-2.36.9-1.fc26.s390x
libgusb-0.2.11-1.fc26.s390x
libtalloc-2.1.10-2.fc26.s390x
libdhash-0.5.0-34.fc26.s390x
python2-bcrypt-3.1.4-2.fc26.s390x
PyYAML-3.12-3.fc26.s390x
nss-softokn-freebl-3.34.0-1.0.fc26.s390x
kernel-modules-4.13.16-202.fc26.s390x
git-2.13.6-2.fc26.s390x
gnupg2-smime-2.2.3-1.fc26.s390x
openssl-devel-1.1.0g-1.fc26.s390x
python2-dnf-plugins-extras-common-2.0.4-1.fc26.noarch
copy-jdk-configs-3.3-2.fc26.noarch
glusterfs-client-xlators-3.10.8-1.fc26.s390x
libcurl-7.53.1-13.fc26.s390x
bind-libs-lite-9.11.1-4.P3.fc26.s390x
glusterfs-extra-xlators-3.10.8-1.fc26.s390x
python3-setuptools-37.0.0-1.fc26.noarch
kernel-core-4.14.8-200.fc26.s390x
pkgconf-1.3.12-1.fc26.s390x
NetworkManager-1.8.2-4.fc26.s390x
libjpeg-turbo-devel-1.5.3-1.fc26.s390x
lua-5.3.4-7.fc26.s390x
boost-thread-1.63.0-10.fc26.s390x
wget-1.19.2-2.fc26.s390x
libwebp-0.6.1-1.fc26.s390x
kernel-devel-4.14.8-200.fc26.s390x
python3-lxml-4.1.1-1.fc26.s390x
python3-ordered-set-2.0.0-6.fc26.noarch
python3-rpmconf-1.0.19-1.fc26.noarch
python-offtrac-0.1.0-9.fc26.noarch
python2-pycparser-2.14-10.fc26.noarch
python2-sphinx-theme-alabaster-0.7.9-3.fc26.noarch
python2-pysocks-1.6.7-1.fc26.noarch
lua-lpeg-1.0.1-2.fc26.s390x
poppler-0.52.0-10.fc26.s390x
libproxy-0.4.15-2.fc26.s390x
crontabs-1.11-14.20150630git.fc26.noarch
java-1.8.0-openjdk-headless-1.8.0.151-1.b12.fc26.s390x
libev-4.24-2.fc26.s390x
libsigsegv-2.11-1.fc26.s390x
fedora-cert-0.6.0.1-2.fc26.noarch
drpm-0.3.0-6.fc26.s390x
createrepo_c-libs-0.10.0-9.fc26.s390x
python2-cccolutils-1.5-3.fc26.s390x
m17n-lib-1.7.0-6.fc26.s390x
lsscsi-0.28-4.fc26.s390x
python2-koji-1.14.0-1.fc26.noarch
python3-koji-1.14.0-1.fc26.noarch
python3-gpg-1.8.0-12.fc26.s390x
sg3_utils-libs-1.42-1.fc26.s390x
SDL2-2.0.7-2.fc26.s390x
util-linux-2.30.2-1.fc26.s390x
rpcbind-0.2.4-8.rc2.fc26.s390x
s390utils-mon_statd-1.36.1-3.fc26.s390x
GConf2-3.2.6-17.fc26.s390x
systemd-container-233-7.fc26.s390x
usermode-1.111-9.fc26.s390x
pcre-utf32-8.41-3.fc26.s390x
libXt-1.1.5-4.fc26.s390x
libXpm-3.5.12-2.fc26.s390x
at-spi2-core-2.24.1-1.fc26.s390x
cairo-1.14.10-1.fc26.s390x
texlive-kpathsea-bin-svn40473-33.20160520.fc26.2.s390x
texlive-ifluatex-svn41346-33.fc26.2.noarch
texlive-babel-svn40706-33.fc26.2.noarch
texlive-colortbl-svn29803.v1.0a-33.fc26.2.noarch
texlive-marvosym-svn29349.2.2a-33.fc26.2.noarch
texlive-euler-svn17261.2.5-33.fc26.2.noarch
texlive-latexconfig-svn40274-33.fc26.2.noarch
texlive-plain-svn40274-33.fc26.2.noarch
texlive-texconfig-bin-svn29741.0-33.20160520.fc26.2.noarch
giflib-4.1.6-16.fc26.s390x
texlive-microtype-svn41127-33.fc26.2.noarch
texlive-eurosym-svn17265.1.4_subrfix-33.fc26.2.noarch
texlive-symbol-svn31835.0-33.fc26.2.noarch
texlive-chngcntr-svn17157.1.0a-33.fc26.2.noarch
texlive-euenc-svn19795.0.1h-33.fc26.2.noarch
texlive-luatex-svn40963-33.fc26.2.noarch
texlive-knuth-local-svn38627-33.fc26.2.noarch
texlive-mparhack-svn15878.1.4-33.fc26.2.noarch
texlive-rcs-svn15878.0-33.fc26.2.noarch
texlive-texlive-msg-translations-svn41431-33.fc26.2.noarch
texlive-updmap-map-svn41159-33.fc26.2.noarch
texlive-geometry-svn19716.5.6-33.fc26.2.noarch
texlive-memoir-svn41203-33.fc26.2.noarch
texlive-l3kernel-svn41246-33.fc26.2.noarch
texlive-pst-eps-svn15878.1.0-33.fc26.2.noarch
texlive-pst-text-svn15878.1.00-33.fc26.2.noarch
texlive-amscls-svn36804.0-33.fc26.2.noarch
texlive-pst-slpe-svn24391.1.31-33.fc26.2.noarch
texlive-extsizes-svn17263.1.4a-33.fc26.2.noarch
texlive-xetex-def-svn40327-33.fc26.2.noarch
texlive-collection-latex-svn41011-33.20160520.fc26.2.noarch
gstreamer1-plugins-base-1.12.3-1.fc26.s390x
fpc-srpm-macros-1.1-2.fc26.noarch
xorg-x11-proto-devel-7.7-22.fc26.noarch
urw-fonts-2.4-23.fc26.noarch
atk-devel-2.24.0-1.fc26.s390x
ImageMagick-libs-6.9.9.22-1.fc26.s390x
libxcb-devel-1.12-3.fc26.s390x
libXrandr-devel-1.5.1-2.fc26.s390x
libcom_err-devel-1.43.4-2.fc26.s390x
dbus-devel-1.11.18-1.fc26.s390x
libepoxy-devel-1.4.3-1.fc26.s390x
libicu-devel-57.1-7.fc26.s390x
p11-kit-devel-0.23.9-2.fc26.s390x
rpm-build-4.13.0.2-1.fc26.s390x
libssh2-devel-1.8.0-5.fc26.s390x
graphviz-2.40.1-4.fc26.s390x
zlib-static-1.2.11-2.fc26.s390x
mesa-libgbm-devel-17.2.4-2.fc26.s390x
dracut-config-rescue-046-3.1.fc26.s390x
screen-4.6.2-1.fc26.s390x
python-osbs-client-0.39.1-1.fc26.noarch
gcc-gdb-plugin-7.2.1-2.fc26.s390x
pyparsing-2.1.10-3.fc26.noarch
python3-pyasn1-0.2.3-1.fc26.noarch
python2-html5lib-0.999-13.fc26.noarch
teamd-1.27-1.fc26.s390x
hardlink-1.3-1.fc26.s390x
chrpath-0.16-4.fc26.s390x
libgcc-7.2.1-2.fc26.s390x
python-rpm-macros-3-20.fc26.noarch
texlive-pdftex-doc-svn41149-33.fc26.2.noarch
glibc-common-2.25-12.fc26.s390x
libstdc++-7.2.1-2.fc26.s390x
nspr-4.17.0-1.fc26.s390x
grep-3.1-1.fc26.s390x
libgcrypt-1.7.9-1.fc26.s390x
libacl-2.2.52-15.fc26.s390x
cpio-2.12-4.fc26.s390x
libatomic_ops-7.4.4-2.fc26.s390x
p11-kit-0.23.9-2.fc26.s390x
gc-7.6.0-2.fc26.s390x
psmisc-22.21-9.fc26.s390x
systemd-libs-233-7.fc26.s390x
xz-5.2.3-2.fc26.s390x
perl-libs-5.24.3-395.fc26.s390x
kmod-libs-24-1.fc26.s390x
libpcap-1.8.1-3.fc26.s390x
perl-macros-5.24.3-395.fc26.s390x
perl-parent-0.236-2.fc26.noarch
perl-Text-Unidecode-1.30-2.fc26.noarch
newt-0.52.20-1.fc26.s390x
libcomps-0.1.8-3.fc26.s390x
libfontenc-1.1.3-4.fc26.s390x
ipcalc-0.2.0-1.fc26.s390x
libnfnetlink-1.0.1-9.fc26.s390x
libref_array-0.1.5-34.fc26.s390x
perl-Term-Cap-1.17-366.fc26.noarch
perl-Digest-1.17-367.fc26.noarch
perl-SelfLoader-1.23-395.fc26.noarch
perl-Pod-Simple-3.35-2.fc26.noarch
perl-URI-1.71-6.fc26.noarch
cpp-7.2.1-2.fc26.s390x
attr-2.4.47-18.fc26.s390x
gmp-c++-6.1.2-4.fc26.s390x
xapian-core-libs-1.4.4-1.fc26.s390x
system-python-3.6.3-2.fc26.s390x
harfbuzz-icu-1.4.4-1.fc26.s390x
libtevent-0.9.34-1.fc26.s390x
http-parser-2.7.1-5.fc26.s390x
libsodium-1.0.14-1.fc26.s390x
python-gssapi-1.2.0-5.fc26.s390x
nss-softokn-3.34.0-1.0.fc26.s390x
gnupg2-2.2.3-1.fc26.s390x
nss-devel-3.34.0-1.0.fc26.s390x
vim-minimal-8.0.1360-1.fc26.s390x
perl-libnet-3.11-1.fc26.noarch
kernel-devel-4.13.16-202.fc26.s390x
python2-libs-2.7.14-4.fc26.s390x
libwayland-client-1.13.0-3.fc26.s390x
python3-dnf-2.7.5-2.fc26.noarch
glusterfs-fuse-3.10.8-1.fc26.s390x
pcre2-utf32-10.23-11.fc26.s390x
kernel-modules-4.14.8-200.fc26.s390x
pkgconf-pkg-config-1.3.12-1.fc26.s390x
NetworkManager-ppp-1.8.2-4.fc26.s390x
wayland-devel-1.13.0-3.fc26.s390x
kernel-4.14.8-200.fc26.s390x
boost-random-1.63.0-10.fc26.s390x
libmicrohttpd-0.9.58-1.fc26.s390x
mailx-12.5-24.fc26.s390x
NetworkManager-glib-1.8.2-4.fc26.s390x
libcroco-0.6.12-1.fc26.s390x
libssh2-1.8.0-5.fc26.s390x
json-glib-1.2.6-1.fc26.s390x
libevent-2.0.22-3.fc26.s390x
gdk-pixbuf2-modules-2.36.9-1.fc26.s390x
colord-libs-1.3.5-1.fc26.s390x
python3-magic-5.30-11.fc26.noarch
python3-gobject-base-3.24.1-1.fc26.s390x
python3-pyroute2-0.4.13-1.fc26.noarch
python3-pysocks-1.6.7-1.fc26.noarch
python2-click-6.7-3.fc26.noarch
python-munch-2.1.0-2.fc26.noarch
python2-ply-3.9-3.fc26.noarch
python2-snowballstemmer-1.2.1-3.fc26.noarch
python-magic-5.30-11.fc26.noarch
python-beautifulsoup4-4.6.0-1.fc26.noarch
python2-gitdb-2.0.3-1.fc26.noarch
librados-devel-10.2.7-2.fc26.s390x
libcacard-2.5.3-1.fc26.s390x
libmodman-2.0.1-13.fc26.s390x
zziplib-0.13.62-8.fc26.s390x
lksctp-tools-1.0.16-6.fc26.s390x
procmail-3.22-44.fc26.s390x
libthai-0.1.25-2.fc26.s390x
libpipeline-1.4.1-3.fc26.s390x
python2-pycurl-7.43.0-8.fc26.s390x
deltarpm-3.6-19.fc26.s390x
subversion-libs-1.9.7-1.fc26.s390x
python-krbV-1.0.90-13.fc26.s390x
m17n-db-1.7.0-8.fc26.noarch
linux-atm-libs-2.5.1-17.fc26.s390x
python2-rpm-4.13.0.2-1.fc26.s390x
python2-librepo-1.8.0-1.fc26.s390x
python2-dnf-plugins-core-2.1.5-1.fc26.noarch
qrencode-libs-3.4.4-1.fc26.s390x
s390utils-iucvterm-1.36.1-3.fc26.s390x
libsmartcols-2.30.2-1.fc26.s390x
dbus-1.11.18-1.fc26.s390x
systemd-udev-233-7.fc26.s390x
device-mapper-event-1.02.137-6.fc26.s390x
polkit-0.113-8.fc26.s390x
mock-1.4.7-2.fc26.noarch
libwmf-lite-0.2.8.4-53.fc26.s390x
libXcomposite-0.4.4-9.fc26.s390x
libXcursor-1.1.14-8.fc26.s390x
at-spi2-atk-2.24.1-1.fc26.s390x
pango-1.40.12-1.fc26.s390x
texlive-metafont-bin-svn40987-33.20160520.fc26.2.s390x
texlive-url-svn32528.3.4-33.fc26.2.noarch
texlive-fp-svn15878.0-33.fc26.2.noarch
texlive-latex-fonts-svn28888.0-33.fc26.2.noarch
texlive-mptopdf-bin-svn18674.0-33.20160520.fc26.2.noarch
texlive-fancybox-svn18304.1.4-33.fc26.2.noarch
texlive-lua-alt-getopt-svn29349.0.7.0-33.fc26.2.noarch
texlive-tex-bin-svn40987-33.20160520.fc26.2.s390x
texlive-texconfig-svn40768-33.fc26.2.noarch
texlive-wasy2-ps-svn35830.0-33.fc26.2.noarch
texlive-psfrag-svn15878.3.04-33.fc26.2.noarch
texlive-helvetic-svn31835.0-33.fc26.2.noarch
texlive-times-svn35058.0-33.fc26.2.noarch
texlive-cite-svn36428.5.5-33.fc26.2.noarch
texlive-fancyhdr-svn15878.3.1-33.fc26.2.noarch
texlive-luatex-bin-svn41091-33.20160520.fc26.2.s390x
texlive-lm-math-svn36915.1.959-33.fc26.2.noarch
texlive-ntgclass-svn15878.2.1a-33.fc26.2.noarch
texlive-sansmath-svn17997.1.1-33.fc26.2.noarch
texlive-textcase-svn15878.0-33.fc26.2.noarch
texlive-unicode-data-svn39808-33.fc26.2.noarch
texlive-breakurl-svn29901.1.40-33.fc26.2.noarch
texlive-latex-svn40218-33.fc26.2.noarch
texlive-lualatex-math-svn40621-33.fc26.2.noarch
texlive-pst-coil-svn37377.1.07-33.fc26.2.noarch
texlive-pst-plot-svn41242-33.fc26.2.noarch
texlive-unicode-math-svn38462-33.fc26.2.noarch
texlive-pst-blur-svn15878.2.0-33.fc26.2.noarch
texlive-cm-super-svn15878.0-33.fc26.2.noarch
texlive-wasysym-svn15878.2.0-33.fc26.2.noarch
texlive-collection-fontsrecommended-svn35830.0-33.20160520.fc26.2.noarch
libXv-1.0.11-2.fc26.s390x
ghc-srpm-macros-1.4.2-5.fc26.noarch
latex2html-2017.2-2.fc26.noarch
libXau-devel-1.0.8-7.fc26.s390x
libXcursor-devel-1.1.14-8.fc26.s390x
graphite2-devel-1.3.10-1.fc26.s390x
pixman-devel-0.34.0-3.fc26.s390x
wayland-protocols-devel-1.9-1.fc26.noarch
mesa-libGLES-devel-17.2.4-2.fc26.s390x
redhat-rpm-config-63-1.fc26.noarch
vte291-devel-0.48.4-1.fc26.s390x
ceph-devel-compat-10.2.7-2.fc26.s390x
lzo-devel-2.08-9.fc26.s390x
libiscsi-devel-1.15.0-3.fc26.s390x
libfdt-devel-1.4.5-1.fc26.s390x
dnsmasq-2.76-5.fc26.s390x
avahi-autoipd-0.6.32-7.fc26.s390x
rpm-plugin-systemd-inhibit-4.13.0.2-1.fc26.s390x
gcc-c++-7.2.1-2.fc26.s390x
python2-ndg_httpsclient-0.4.0-7.fc26.noarch
gettext-0.19.8.1-9.fc26.s390x
btrfs-progs-4.9.1-2.fc26.s390x
fedora-logos-26.0.1-1.fc26.s390x
dejagnu-1.6-2.fc26.noarch
libaio-devel-0.3.110-7.fc26.s390x
dos2unix-7.3.4-2.fc26.s390x
distribution-gpg-keys-1.15-1.fc26.noarch
python-sphinx-locale-1.5.5-1.fc26.noarch
python2-rpm-macros-3-20.fc26.noarch
libxml2-2.9.4-2.fc26.s390x
popt-1.16-12.fc26.s390x
tar-1.29-5.fc26.s390x
avahi-libs-0.6.32-7.fc26.s390x
m4-1.4.18-3.fc26.s390x
perl-Socket-2.024-2.fc26.s390x
perl-Time-Local-1.250-2.fc26.noarch
libmetalink-0.1.3-2.fc26.s390x
jbigkit-libs-2.1-6.fc26.s390x
netpbm-10.80.00-2.fc26.s390x
perl-Digest-MD5-2.55-3.fc26.s390x
perl-Getopt-Long-2.49.1-2.fc26.noarch
libglvnd-opengl-1.0.0-1.fc26.s390x
libattr-devel-2.4.47-18.fc26.s390x
teckit-2.5.1-16.fc26.s390x
python3-six-1.10.0-9.fc26.noarch
python3-libcomps-0.1.8-3.fc26.s390x
gtk-update-icon-cache-3.22.21-2.fc26.s390x
python3-3.6.3-2.fc26.s390x
python3-pyparsing-2.1.10-3.fc26.noarch
python2-markupsafe-0.23-13.fc26.s390x
python2-mock-2.0.0-4.fc26.noarch
python2-yubico-1.3.2-7.fc26.noarch
python2-smmap-2.0.3-1.fc26.noarch
librbd-devel-10.2.7-2.fc26.s390x
pigz-2.3.4-2.fc26.s390x
gcc-7.2.1-2.fc26.s390x
libnghttp2-1.21.1-1.fc26.s390x
cups-libs-2.2.2-7.fc26.s390x
libnfsidmap-0.27-1.fc26.s390x
ykpers-1.18.0-2.fc26.s390x
python3-librepo-1.8.0-1.fc26.s390x
systemtap-runtime-3.2-2.fc26.s390x
geoclue2-2.4.5-4.fc26.s390x
initscripts-9.72-1.fc26.s390x
plymouth-0.9.3-0.7.20160620git0e65b86c.fc26.s390x
ebtables-2.0.10-22.fc26.s390x
gssproxy-0.7.0-9.fc26.s390x
libXext-1.3.3-5.fc26.s390x
mesa-libEGL-17.2.4-2.fc26.s390x
texlive-texlive.infra-bin-svn40312-33.20160520.fc26.2.s390x
texlive-thumbpdf-svn34621.3.16-33.fc26.2.noarch
texlive-carlisle-svn18258.0-33.fc26.2.noarch
texlive-gsftopk-svn40768-33.fc26.2.noarch
texlive-pdftex-svn41149-33.fc26.2.noarch
texlive-crop-svn15878.1.5-33.fc26.2.noarch
texlive-pxfonts-svn15878.0-33.fc26.2.noarch
texlive-enctex-svn34957.0-33.fc26.2.noarch
texlive-kastrup-svn15878.0-33.fc26.2.noarch
texlive-pspicture-svn15878.0-33.fc26.2.noarch
texlive-varwidth-svn24104.0.92-33.fc26.2.noarch
texlive-currfile-svn40725-33.fc26.2.noarch
texlive-pst-grad-svn15878.1.06-33.fc26.2.noarch
texlive-latex-bin-svn41438-33.fc26.2.noarch
texlive-ltxmisc-svn21927.0-33.fc26.2.noarch
lasi-1.1.2-7.fc26.s390x
adwaita-icon-theme-3.24.0-2.fc26.noarch
xz-devel-5.2.3-2.fc26.s390x
xorg-x11-fonts-Type1-7.5-17.fc26.noarch
libXi-devel-1.7.9-2.fc26.s390x
at-spi2-atk-devel-2.24.1-1.fc26.s390x
pango-devel-1.40.12-1.fc26.s390x
libcacard-devel-2.5.3-1.fc26.s390x
libseccomp-devel-2.3.2-1.fc26.s390x
subversion-1.9.7-1.fc26.s390x
sudo-1.8.21p2-1.fc26.s390x
pykickstart-2.35-2.fc26.noarch
e2fsprogs-1.43.4-2.fc26.s390x
libstdc++-static-7.2.1-2.fc26.s390x
libbsd-0.8.3-3.fc26.s390x
c-ares-1.13.0-1.fc26.s390x
python2-pyxdg-0.25-12.fc26.noarch
nss-softokn-freebl-devel-3.34.0-1.0.fc26.s390x
python2-rpkg-1.51-2.fc26.noarch
strace-4.20-1.fc26.s390x
valgrind-3.13.0-12.fc26.s390x
libsss_idmap-1.16.0-4.fc26.s390x
gnutls-c++-3.5.16-4.fc26.s390x
libwayland-server-1.13.0-3.fc26.s390x
dhcp-client-4.3.5-10.fc26.s390x
bind-libs-9.11.1-4.P3.fc26.s390x
man-pages-4.09-4.fc26.noarch
gpg-pubkey-a29cb19c-53bcbba6
quota-nls-4.03-9.fc26.noarch
qt5-srpm-macros-5.8.0-2.fc26.noarch
xz-libs-5.2.3-2.fc26.s390x
gmp-6.1.2-4.fc26.s390x
audit-libs-2.8.1-1.fc26.s390x
file-5.30-11.fc26.s390x
libusbx-1.0.21-2.fc26.s390x
binutils-2.27-28.fc26.s390x
perl-Errno-1.25-395.fc26.s390x
perl-HTTP-Tiny-0.070-2.fc26.noarch
xml-common-0.6.3-45.fc26.noarch
opus-1.2.1-1.fc26.s390x
kernel-devel-4.13.13-200.fc26.s390x
perl-podlators-4.09-2.fc26.noarch
flac-libs-1.3.2-2.fc26.s390x
libacl-devel-2.2.52-15.fc26.s390x
coreutils-common-8.27-7.fc26.s390x
cracklib-2.9.6-5.fc26.s390x
pyliblzma-0.5.3-17.fc26.s390x
libnotify-0.7.7-2.fc26.s390x
python3-idna-2.5-1.fc26.noarch
python3-pyOpenSSL-16.2.0-6.fc26.noarch
python2-pbr-1.10.0-4.fc26.noarch
pyusb-1.0.0-4.fc26.noarch
python2-fedora-0.9.0-6.fc26.noarch
librbd1-10.2.7-2.fc26.s390x
pcre-cpp-8.41-3.fc26.s390x
glibc-devel-2.25-12.fc26.s390x
libnfs-1.9.8-3.fc26.s390x
libsolv-0.6.30-2.fc26.s390x
python3-pycurl-7.43.0-8.fc26.s390x
libyubikey-1.13-3.fc26.s390x
rpmlint-1.10-5.fc26.noarch
python2-pygpgme-0.3-22.fc26.s390x
s390utils-base-1.36.1-3.fc26.s390x
ppp-2.4.7-11.fc26.s390x
s390utils-cpuplugd-1.36.1-3.fc26.s390x
nfs-utils-2.1.1-6.rc6.fc26.s390x
libXrender-0.9.10-2.fc26.s390x
libglvnd-gles-1.0.0-1.fc26.s390x
texlive-texlive.infra-svn41280-33.fc26.2.noarch
texlive-lm-svn28119.2.004-33.fc26.2.noarch
texlive-babelbib-svn25245.1.31-33.fc26.2.noarch
texlive-index-svn24099.4.1beta-33.fc26.2.noarch
texlive-pdftex-bin-svn40987-33.20160520.fc26.2.s390x
texlive-csquotes-svn39538-33.fc26.2.noarch
texlive-rsfs-svn15878.0-33.fc26.2.noarch
texlive-etex-svn37057.0-33.fc26.2.noarch
texlive-knuth-lib-svn35820.0-33.fc26.2.noarch
texlive-pst-math-svn34786.0.63-33.fc26.2.noarch
texlive-utopia-svn15878.0-33.fc26.2.noarch
texlive-eso-pic-svn37925.2.0g-33.fc26.2.noarch
texlive-pst-fill-svn15878.1.01-33.fc26.2.noarch
texlive-latex-bin-bin-svn14050.0-33.20160520.fc26.2.noarch
texlive-jknapltx-svn19440.0-33.fc26.2.noarch
texlive-collection-latexrecommended-svn35765.0-33.20160520.fc26.2.noarch
adwaita-cursor-theme-3.24.0-2.fc26.noarch
xorg-x11-fonts-ISO8859-1-100dpi-7.5-17.fc26.noarch
libXcomposite-devel-0.4.4-9.fc26.s390x
at-spi2-core-devel-2.24.1-1.fc26.s390x
harfbuzz-devel-1.4.4-1.fc26.s390x
rpmdevtools-8.10-2.fc26.noarch
texi2html-5.0-5.fc26.noarch
libnfs-devel-1.9.8-3.fc26.s390x
firewalld-0.4.4.5-1.fc26.noarch
wpa_supplicant-2.6-12.fc26.s390x
systemtap-sdt-devel-3.2-2.fc26.s390x
newt-python-0.52.20-1.fc26.s390x
perl-Mozilla-CA-20160104-4.fc26.noarch
pth-2.0.7-28.fc26.s390x
python3-pyxdg-0.25-12.fc26.noarch
nss-softokn-devel-3.34.0-1.0.fc26.s390x
fedpkg-1.30-4.fc26.noarch
timedatex-0.4-3.fc26.s390x
libjpeg-turbo-1.5.3-1.fc26.s390x
glusterfs-cli-3.10.8-1.fc26.s390x
libsss_nss_idmap-1.16.0-4.fc26.s390x
gdb-8.0.1-33.fc26.s390x
dnf-yum-2.7.5-2.fc26.noarch
perl-Data-Dumper-2.161-3.fc26.s390x
python-async-0.6.1-9.fc22.s390x
poppler-data-0.4.7-7.fc26.noarch
ocaml-srpm-macros-4-2.fc26.noarch
libuuid-2.30.2-1.fc26.s390x
libgpg-error-1.25-2.fc26.s390x
libassuan-2.4.3-2.fc26.s390x
graphite2-1.3.10-1.fc26.s390x
perl-Text-Tabs+Wrap-2013.0523-366.fc26.noarch
perl-Error-0.17024-8.fc26.noarch
which-2.21-2.fc26.s390x
libXau-1.0.8-7.fc26.s390x
orc-0.4.27-1.fc26.s390x
perl-Pod-Perldoc-3.28-1.fc26.noarch
libsndfile-1.0.28-6.fc26.s390x
patch-2.7.5-4.fc26.s390x
gzip-1.8-2.fc26.s390x
python-ipaddress-1.0.16-4.fc26.noarch
yum-metadata-parser-1.1.4-18.fc26.s390x
python3-dbus-1.2.4-6.fc26.s390x
python3-cryptography-2.0.2-2.fc26.s390x
python3-kickstart-2.35-2.fc26.noarch
python2-imagesize-0.7.1-5.fc26.noarch
python2-jinja2-2.9.6-1.fc26.noarch
libradosstriper-devel-10.2.7-2.fc26.s390x
soundtouch-1.9.2-4.fc26.s390x
glibc-headers-2.25-12.fc26.s390x
libndp-1.6-2.fc26.s390x
rpm-4.13.0.2-1.fc26.s390x
rest-0.8.0-2.fc26.s390x
libvisual-0.4.0-21.fc26.s390x
python2-hawkey-0.11.1-1.fc26.s390x
dnf-plugins-core-2.1.5-1.fc26.noarch
fakeroot-libs-1.22-1.fc26.s390x
device-mapper-event-libs-1.02.137-6.fc26.s390x
cyrus-sasl-2.1.26-32.fc26.s390x
kernel-modules-4.13.13-200.fc26.s390x
cronie-anacron-1.5.1-5.fc26.s390x
libpath_utils-0.2.1-34.fc26.s390x
libX11-common-1.6.5-2.fc26.noarch
libXft-2.3.2-5.fc26.s390x
gtk2-2.24.31-4.fc26.s390x
texlive-etoolbox-svn38031.2.2a-33.fc26.2.noarch
texlive-multido-svn18302.1.42-33.fc26.2.noarch
texlive-glyphlist-svn28576.0-33.fc26.2.noarch
texlive-setspace-svn24881.6.7a-33.fc26.2.noarch
texlive-mathtools-svn38833-33.fc26.2.noarch
texlive-ncntrsbk-svn31835.0-33.fc26.2.noarch
texlive-dvisvgm-def-svn41011-33.fc26.2.noarch
texlive-ifetex-svn24853.1.2-33.fc26.2.noarch
texlive-parskip-svn19963.2.0-33.fc26.2.noarch
texlive-bera-svn20031.0-33.fc26.2.noarch
texlive-pgf-svn40966-33.fc26.2.noarch
texlive-auto-pst-pdf-svn23723.0.6-33.fc26.2.noarch
texlive-ctable-svn38672-33.fc26.2.noarch
texlive-typehtml-svn17134.0-33.fc26.2.noarch
mesa-libGLES-17.2.4-2.fc26.s390x
vte291-0.48.4-1.fc26.s390x
libdrm-devel-2.4.88-1.fc26.s390x
libcephfs_jni1-10.2.7-2.fc26.s390x
bzip2-devel-1.0.6-22.fc26.s390x
expat-devel-2.2.4-1.fc26.s390x
libsepol-devel-2.6-2.fc26.s390x
glib2-static-2.52.3-2.fc26.s390x
virglrenderer-devel-0.6.0-1.20170210git76b3da97b.fc26.s390x
yum-utils-1.1.31-512.fc26.noarch
parted-3.2-24.fc26.s390x
python3-beautifulsoup4-4.6.0-1.fc26.noarch
python-bunch-1.0.1-10.fc26.noarch
perl-Time-HiRes-1.9746-1.fc26.s390x
lz4-1.8.0-1.fc26.s390x
nss-util-3.34.0-1.0.fc26.s390x
openssh-clients-7.5p1-4.fc26.s390x
chrony-3.2-1.fc26.s390x
dnf-conf-2.7.5-2.fc26.noarch
glusterfs-server-3.10.8-1.fc26.s390x
sssd-client-1.16.0-4.fc26.s390x
man-db-2.7.6.1-8.fc26.s390x
bodhi-client-2.12.2-3.fc26.noarch
perl-Module-CoreList-5.20171120-1.fc26.noarch
hawkey-0.6.4-3.fc25.s390x
python-srpm-macros-3-20.fc26.noarch
perl-srpm-macros-1-21.fc26.noarch
expat-2.2.4-1.fc26.s390x
chkconfig-1.10-1.fc26.s390x
findutils-4.6.0-12.fc26.s390x
mesa-libwayland-egl-17.2.4-2.fc26.s390x
procps-ng-3.3.10-13.fc26.s390x
mesa-libglapi-17.2.4-2.fc26.s390x
perl-Unicode-Normalize-1.25-366.fc26.s390x
perl-IO-Socket-IP-0.39-1.fc26.noarch
hunspell-en-US-0.20140811.1-6.fc26.noarch
libxcb-1.12-3.fc26.s390x
libgo-devel-7.2.1-2.fc26.s390x
perl-Pod-Escapes-1.07-366.fc26.noarch
perl-Pod-Usage-1.69-2.fc26.noarch
libtheora-1.1.1-15.fc26.s390x
tcp_wrappers-7.6-85.fc26.s390x
coreutils-8.27-7.fc26.s390x
libmount-2.30.2-1.fc26.s390x
python2-iniparse-0.4-24.fc26.noarch
python2-decorator-4.0.11-2.fc26.noarch
ModemManager-glib-1.6.10-1.fc26.s390x
python3-decorator-4.0.11-2.fc26.noarch
python3-cffi-1.9.1-2.fc26.s390x
python-bugzilla-cli-2.1.0-1.fc26.noarch
python2-funcsigs-1.0.2-5.fc26.noarch
python2-babel-2.3.4-5.fc26.noarch
python-bugzilla-2.1.0-1.fc26.noarch
libradosstriper1-10.2.7-2.fc26.s390x
snappy-1.1.4-3.fc26.s390x
dtc-1.4.5-1.fc26.s390x
libmpcdec-1.2.6-17.fc26.s390x
rpm-libs-4.13.0.2-1.fc26.s390x
python-urlgrabber-3.10.1-11.fc26.noarch
sysfsutils-2.1.0-20.fc26.s390x
python3-hawkey-0.11.1-1.fc26.s390x
python3-dnf-plugins-core-2.1.5-1.fc26.noarch
ethtool-4.13-1.fc26.s390x
iputils-20161105-5.fc26.s390x
plymouth-scripts-0.9.3-0.7.20160620git0e65b86c.fc26.s390x
cronie-1.5.1-5.fc26.s390x
libini_config-1.3.1-34.fc26.s390x
libX11-1.6.5-2.fc26.s390x
libglvnd-egl-1.0.0-1.fc26.s390x
texlive-kpathsea-svn41139-33.fc26.2.noarch
texlive-thumbpdf-bin-svn6898.0-33.20160520.fc26.2.noarch
texlive-subfig-svn15878.1.3-33.fc26.2.noarch
texlive-gsftopk-bin-svn40473-33.20160520.fc26.2.s390x
texlive-tex-ini-files-svn40533-33.fc26.2.noarch
texlive-qstest-svn15878.0-33.fc26.2.noarch
texlive-palatino-svn31835.0-33.fc26.2.noarch
texlive-ec-svn25033.1.0-33.fc26.2.noarch
texlive-iftex-svn29654.0.2-33.fc26.2.noarch
texlive-pslatex-svn16416.0-33.fc26.2.noarch
texlive-algorithms-svn38085.0.1-33.fc26.2.noarch
texlive-filehook-svn24280.0.5d-33.fc26.2.noarch
texlive-pst-node-svn40743-33.fc26.2.noarch
texlive-rotating-svn16832.2.16b-33.fc26.2.noarch
texlive-seminar-svn34011.1.62-33.fc26.2.noarch
gtk3-3.22.21-2.fc26.s390x
libuuid-devel-2.30.2-1.fc26.s390x
java-1.8.0-openjdk-1.8.0.151-1.b12.fc26.s390x
libXinerama-devel-1.1.3-7.fc26.s390x
emacs-common-25.3-3.fc26.s390x
gtk3-devel-3.22.21-2.fc26.s390x
fedora-packager-0.6.0.1-2.fc26.noarch
libxml2-devel-2.9.4-2.fc26.s390x
snappy-devel-1.1.4-3.fc26.s390x
python2-dnf-plugin-migrate-2.1.5-1.fc26.noarch
authconfig-7.0.1-2.fc26.s390x
newt-python3-0.52.20-1.fc26.s390x
python-decoratortools-1.8-13.fc26.noarch
python-systemd-doc-234-1.fc26.s390x
openssl-libs-1.1.0g-1.fc26.s390x
git-core-2.13.6-2.fc26.s390x
python3-dnf-plugin-system-upgrade-2.0.4-1.fc26.noarch
glusterfs-libs-3.10.8-1.fc26.s390x
ca-certificates-2017.2.20-1.0.fc26.noarch
unbound-libs-1.6.7-1.fc26.s390x
libsss_certmap-1.16.0-4.fc26.s390x
glusterfs-api-devel-3.10.8-1.fc26.s390x
selinux-policy-targeted-3.13.1-260.17.fc26.noarch
publicsuffix-list-dafsa-20171028-1.fc26.noarch
gpg-pubkey-a0a7badb-52844296
gpg-pubkey-e372e838-56fd7943
gpg-pubkey-3b921d09-57a87096
google-roboto-slab-fonts-1.100263-0.5.20150923git.fc26.noarch
libreport-filesystem-2.9.1-3.fc26.s390x
glibc-all-langpacks-2.25-12.fc26.s390x
libcom_err-1.43.4-2.fc26.s390x
libffi-3.1-12.fc26.s390x
keyutils-libs-1.5.10-1.fc26.s390x
diffutils-3.5-3.fc26.s390x
apr-util-1.5.4-6.fc26.s390x
bluez-libs-5.46-6.fc26.s390x
libksba-1.3.5-3.fc26.s390x
ncurses-6.0-8.20170212.fc26.s390x
gsm-1.0.17-1.fc26.s390x
libteam-1.27-1.fc26.s390x
perl-Fedora-VSP-0.001-5.fc26.noarch
libusb-0.1.5-8.fc26.s390x
acl-2.2.52-15.fc26.s390x
dwz-0.12-3.fc26.s390x
libblkid-2.30.2-1.fc26.s390x
polkit-libs-0.113-8.fc26.s390x
dbus-python-1.2.4-6.fc26.s390x
gts-0.7.6-30.20121130.fc26.s390x
libfdisk-2.30.2-1.fc26.s390x
python3-pycparser-2.14-10.fc26.noarch
python3-bugzilla-2.1.0-1.fc26.noarch
python2-docutils-0.13.1-4.fc26.noarch
pytz-2016.10-4.fc26.noarch
python2-requests-2.13.0-1.fc26.noarch
libcephfs-devel-10.2.7-2.fc26.s390x
ncurses-c++-libs-6.0-8.20170212.fc26.s390x
GeoIP-1.6.11-1.fc26.s390x
liblockfile-1.09-5.fc26.s390x
rpm-plugin-selinux-4.13.0.2-1.fc26.s390x
systemtap-devel-3.2-2.fc26.s390x
libsysfs-2.1.0-20.fc26.s390x
libdnf-0.11.1-1.fc26.s390x
libgfortran-7.2.1-2.fc26.s390x
mesa-libgbm-17.2.4-2.fc26.s390x
dracut-046-3.1.fc26.s390x
lvm2-libs-2.02.168-6.fc26.s390x
libXfixes-5.0.3-2.fc26.s390x
brlapi-0.6.6-5.fc26.s390x
texlive-metafont-svn40793-33.fc26.2.noarch
texlive-graphics-cfg-svn40269-33.fc26.2.noarch
texlive-mptopdf-svn41282-33.fc26.2.noarch
texlive-makeindex-bin-svn40473-33.20160520.fc26.2.s390x
texlive-texlive-scripts-bin-svn29741.0-33.20160520.fc26.2.noarch
texlive-sauerj-svn15878.0-33.fc26.2.noarch
texlive-txfonts-svn15878.0-33.fc26.2.noarch
texlive-filecontents-svn24250.1.3-33.fc26.2.noarch
texlive-lualibs-svn40370-33.fc26.2.noarch
texlive-section-svn20180.0-33.fc26.2.noarch
texlive-ucharcat-svn38907-33.fc26.2.noarch
texlive-hyperref-svn41396-33.fc26.2.noarch
texlive-pst-3d-svn17257.1.10-33.fc26.2.noarch
texlive-oberdiek-svn41346-33.fc26.2.noarch
texlive-ae-svn15878.1.4-33.fc26.2.noarch
texlive-collection-basic-svn41149-33.20160520.fc26.2.noarch
gnat-srpm-macros-4-2.fc26.noarch
glib2-devel-2.52.3-2.fc26.s390x
netpbm-progs-10.80.00-2.fc26.s390x
libXxf86vm-devel-1.1.4-4.fc26.s390x
nettle-devel-3.3-2.fc26.s390x
cairo-gobject-devel-1.14.10-1.fc26.s390x
fedora-rpm-macros-26-2.fc26.noarch
elfutils-devel-0.169-1.fc26.s390x
libidn-devel-1.33-2.fc26.s390x
s390utils-1.36.1-3.fc26.s390x
gcc-gfortran-7.2.1-2.fc26.s390x
libtool-2.4.6-17.fc26.s390x
python3-cssselect-0.9.2-4.fc26.noarch
python2-cssselect-0.9.2-4.fc26.noarch
bison-3.0.4-6.fc26.s390x
rootfiles-8.1-20.fc26.noarch
git-core-doc-2.13.6-2.fc26.s390x
vim-enhanced-8.0.1360-1.fc26.s390x
glusterfs-3.10.8-1.fc26.s390x
boost-system-1.63.0-10.fc26.s390x
gnutls-dane-3.5.16-4.fc26.s390x
pkgconf-m4-1.3.12-1.fc26.noarch
libcurl-devel-7.53.1-13.fc26.s390x
python3-urllib3-1.20-2.fc26.noarch
libsss_autofs-1.16.0-4.fc26.s390x
=== TEST BEGIN ===
Using CC: /home/fam/bin/cc
Install prefix /var/tmp/patchew-tester-tmp-zu_flv2_/src/install
BIOS directory /var/tmp/patchew-tester-tmp-zu_flv2_/src/install/share/qemu
firmware path /var/tmp/patchew-tester-tmp-zu_flv2_/src/install/share/qemu-firmware
binary directory /var/tmp/patchew-tester-tmp-zu_flv2_/src/install/bin
library directory /var/tmp/patchew-tester-tmp-zu_flv2_/src/install/lib
module directory /var/tmp/patchew-tester-tmp-zu_flv2_/src/install/lib/qemu
libexec directory /var/tmp/patchew-tester-tmp-zu_flv2_/src/install/libexec
include directory /var/tmp/patchew-tester-tmp-zu_flv2_/src/install/include
config directory /var/tmp/patchew-tester-tmp-zu_flv2_/src/install/etc
local state directory /var/tmp/patchew-tester-tmp-zu_flv2_/src/install/var
Manual directory /var/tmp/patchew-tester-tmp-zu_flv2_/src/install/share/man
ELF interp prefix /usr/gnemul/qemu-%M
Source path /var/tmp/patchew-tester-tmp-zu_flv2_/src
GIT binary git
GIT submodules ui/keycodemapdb capstone
C compiler /home/fam/bin/cc
Host C compiler cc
C++ compiler c++
Objective-C compiler /home/fam/bin/cc
ARFLAGS rv
CFLAGS -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -g
QEMU_CFLAGS -I/usr/include/pixman-1 -Werror -DHAS_LIBSSH2_SFTP_FSYNC -pthread -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -DNCURSES_WIDECHAR -D_GNU_SOURCE -D_DEFAULT_SOURCE -m64 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wexpansion-to-defined -Wendif-labels -Wno-shift-negative-value -Wno-missing-include-dirs -Wempty-body -Wnested-externs -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wold-style-declaration -Wold-style-definition -Wtype-limits -fstack-protector-strong -I/usr/include/p11-kit-1 -I/usr/include/libpng16 -I/usr/include/libdrm -I$(SRC_PATH)/capstone/include
LDFLAGS -Wl,--warn-common -m64 -g
make make
install install
python python -B
smbd /usr/sbin/smbd
module support no
host CPU s390x
host big endian yes
target list aarch64-softmmu alpha-softmmu arm-softmmu cris-softmmu i386-softmmu lm32-softmmu m68k-softmmu microblazeel-softmmu microblaze-softmmu mips64el-softmmu mips64-softmmu mipsel-softmmu mips-softmmu moxie-softmmu nios2-softmmu or1k-softmmu ppc64-softmmu ppcemb-softmmu ppc-softmmu s390x-softmmu sh4eb-softmmu sh4-softmmu sparc64-softmmu sparc-softmmu tricore-softmmu unicore32-softmmu x86_64-softmmu xtensaeb-softmmu xtensa-softmmu aarch64-linux-user alpha-linux-user armeb-linux-user arm-linux-user cris-linux-user hppa-linux-user i386-linux-user m68k-linux-user microblazeel-linux-user microblaze-linux-user mips64el-linux-user mips64-linux-user mipsel-linux-user mips-linux-user mipsn32el-linux-user mipsn32-linux-user nios2-linux-user or1k-linux-user ppc64abi32-linux-user ppc64le-linux-user ppc64-linux-user ppc-linux-user s390x-linux-user sh4eb-linux-user sh4-linux-user sparc32plus-linux-user sparc64-linux-user sparc-linux-user tilegx-linux-user x86_64-linux-user
gprof enabled no
sparse enabled no
strip binaries yes
profiler no
static build no
SDL support yes (2.0.7)
GTK support yes (3.22.21)
GTK GL support yes
VTE support yes (0.48.4)
TLS priority NORMAL
GNUTLS support yes
GNUTLS rnd yes
libgcrypt no
libgcrypt kdf no
nettle yes (3.3)
nettle kdf yes
libtasn1 yes
curses support yes
virgl support yes
curl support yes
mingw32 support no
Audio drivers oss
Block whitelist (rw)
Block whitelist (ro)
VirtFS support yes
Multipath support no
VNC support yes
VNC SASL support yes
VNC JPEG support yes
VNC PNG support yes
xen support no
brlapi support yes
bluez support yes
Documentation yes
PIE no
vde support no
netmap support no
Linux AIO support yes
ATTR/XATTR support yes
Install blobs yes
KVM support yes
HAX support no
TCG support yes
TCG debug enabled no
TCG interpreter no
malloc trim support yes
RDMA support no
fdt support yes
preadv support yes
fdatasync yes
madvise yes
posix_madvise yes
libcap-ng support yes
vhost-net support yes
vhost-scsi support yes
vhost-vsock support yes
vhost-user support yes
Trace backends log
spice support no
rbd support yes
xfsctl support no
smartcard support yes
libusb yes
usb net redir yes
OpenGL support yes
OpenGL dmabufs yes
libiscsi support yes
libnfs support yes
build guest agent yes
QGA VSS support no
QGA w32 disk info no
QGA MSI support no
seccomp support yes
coroutine backend ucontext
coroutine pool yes
debug stack usage no
crypto afalg no
GlusterFS support yes
gcov gcov
gcov enabled no
TPM support yes
libssh2 support yes
TPM passthrough no
TPM emulator yes
QOM debugging yes
Live block migration yes
lzo support yes
snappy support yes
bzip2 support yes
NUMA host support no
tcmalloc support no
jemalloc support no
avx2 optimization no
replication support yes
VxHS block device no
capstone git
GEN aarch64-softmmu/config-devices.mak.tmp
GEN alpha-softmmu/config-devices.mak.tmp
GEN arm-softmmu/config-devices.mak.tmp
GEN cris-softmmu/config-devices.mak.tmp
GEN cris-softmmu/config-devices.mak
GEN i386-softmmu/config-devices.mak.tmp
GEN alpha-softmmu/config-devices.mak
GEN arm-softmmu/config-devices.mak
GEN aarch64-softmmu/config-devices.mak
GEN lm32-softmmu/config-devices.mak.tmp
GEN m68k-softmmu/config-devices.mak.tmp
GEN microblazeel-softmmu/config-devices.mak.tmp
GEN m68k-softmmu/config-devices.mak
GEN microblaze-softmmu/config-devices.mak.tmp
GEN lm32-softmmu/config-devices.mak
GEN i386-softmmu/config-devices.mak
GEN mips64el-softmmu/config-devices.mak.tmp
GEN mips64-softmmu/config-devices.mak.tmp
GEN microblaze-softmmu/config-devices.mak
GEN microblazeel-softmmu/config-devices.mak
GEN mipsel-softmmu/config-devices.mak.tmp
GEN mips-softmmu/config-devices.mak.tmp
GEN mips64el-softmmu/config-devices.mak
GEN moxie-softmmu/config-devices.mak.tmp
GEN moxie-softmmu/config-devices.mak
GEN nios2-softmmu/config-devices.mak.tmp
GEN nios2-softmmu/config-devices.mak
GEN or1k-softmmu/config-devices.mak.tmp
GEN or1k-softmmu/config-devices.mak
GEN ppc64-softmmu/config-devices.mak.tmp
GEN mipsel-softmmu/config-devices.mak
GEN mips64-softmmu/config-devices.mak
GEN mips-softmmu/config-devices.mak
GEN ppc64-softmmu/config-devices.mak
GEN ppc-softmmu/config-devices.mak.tmp
GEN ppcemb-softmmu/config-devices.mak.tmp
GEN s390x-softmmu/config-devices.mak.tmp
GEN sh4eb-softmmu/config-devices.mak.tmp
GEN s390x-softmmu/config-devices.mak
GEN sh4-softmmu/config-devices.mak.tmp
GEN sh4eb-softmmu/config-devices.mak
GEN ppcemb-softmmu/config-devices.mak
GEN ppc-softmmu/config-devices.mak
GEN sparc64-softmmu/config-devices.mak.tmp
GEN sparc-softmmu/config-devices.mak.tmp
GEN tricore-softmmu/config-devices.mak.tmp
GEN sh4-softmmu/config-devices.mak
GEN sparc-softmmu/config-devices.mak
GEN unicore32-softmmu/config-devices.mak.tmp
GEN tricore-softmmu/config-devices.mak
GEN x86_64-softmmu/config-devices.mak.tmp
GEN xtensaeb-softmmu/config-devices.mak.tmp
GEN sparc64-softmmu/config-devices.mak
GEN unicore32-softmmu/config-devices.mak
GEN xtensa-softmmu/config-devices.mak.tmp
GEN aarch64-linux-user/config-devices.mak.tmp
GEN xtensaeb-softmmu/config-devices.mak
GEN alpha-linux-user/config-devices.mak.tmp
GEN x86_64-softmmu/config-devices.mak
GEN aarch64-linux-user/config-devices.mak
GEN xtensa-softmmu/config-devices.mak
GEN armeb-linux-user/config-devices.mak.tmp
GEN arm-linux-user/config-devices.mak.tmp
GEN alpha-linux-user/config-devices.mak
GEN cris-linux-user/config-devices.mak.tmp
GEN hppa-linux-user/config-devices.mak.tmp
GEN arm-linux-user/config-devices.mak
GEN i386-linux-user/config-devices.mak.tmp
GEN armeb-linux-user/config-devices.mak
GEN cris-linux-user/config-devices.mak
GEN hppa-linux-user/config-devices.mak
GEN m68k-linux-user/config-devices.mak.tmp
GEN microblazeel-linux-user/config-devices.mak.tmp
GEN i386-linux-user/config-devices.mak
GEN m68k-linux-user/config-devices.mak
GEN microblaze-linux-user/config-devices.mak.tmp
GEN microblazeel-linux-user/config-devices.mak
GEN mips64el-linux-user/config-devices.mak.tmp
GEN mips64-linux-user/config-devices.mak.tmp
GEN mipsel-linux-user/config-devices.mak.tmp
GEN mips64el-linux-user/config-devices.mak
GEN mips64-linux-user/config-devices.mak
GEN microblaze-linux-user/config-devices.mak
GEN mips-linux-user/config-devices.mak.tmp
GEN mipsel-linux-user/config-devices.mak
GEN mipsn32el-linux-user/config-devices.mak.tmp
GEN mipsn32-linux-user/config-devices.mak.tmp
GEN nios2-linux-user/config-devices.mak.tmp
GEN mips-linux-user/config-devices.mak
GEN mipsn32el-linux-user/config-devices.mak
GEN or1k-linux-user/config-devices.mak.tmp
GEN ppc64abi32-linux-user/config-devices.mak.tmp
GEN nios2-linux-user/config-devices.mak
GEN mipsn32-linux-user/config-devices.mak
GEN ppc64le-linux-user/config-devices.mak.tmp
GEN ppc64-linux-user/config-devices.mak.tmp
GEN ppc64abi32-linux-user/config-devices.mak
GEN or1k-linux-user/config-devices.mak
GEN ppc-linux-user/config-devices.mak.tmp
GEN ppc64-linux-user/config-devices.mak
GEN ppc64le-linux-user/config-devices.mak
GEN s390x-linux-user/config-devices.mak.tmp
GEN sh4eb-linux-user/config-devices.mak.tmp
GEN sh4-linux-user/config-devices.mak.tmp
GEN ppc-linux-user/config-devices.mak
GEN sh4eb-linux-user/config-devices.mak
GEN sparc32plus-linux-user/config-devices.mak.tmp
GEN s390x-linux-user/config-devices.mak
GEN sh4-linux-user/config-devices.mak
GEN sparc64-linux-user/config-devices.mak.tmp
GEN sparc-linux-user/config-devices.mak.tmp
GEN tilegx-linux-user/config-devices.mak.tmp
GEN sparc-linux-user/config-devices.mak
GEN sparc64-linux-user/config-devices.mak
GEN sparc32plus-linux-user/config-devices.mak
GEN x86_64-linux-user/config-devices.mak.tmp
GEN config-host.h
GEN x86_64-linux-user/config-devices.mak
GIT ui/keycodemapdb capstone
GEN tilegx-linux-user/config-devices.mak
GEN qemu-options.def
GEN qmp-commands.h
GEN qapi-types.h
GEN qapi-visit.h
GEN qapi-event.h
GEN qmp-marshal.c
GEN qapi-types.c
GEN qapi-visit.c
GEN qapi-event.c
GEN qmp-introspect.h
GEN qmp-introspect.c
GEN trace/generated-tcg-tracers.h
GEN trace/generated-helpers-wrappers.h
GEN trace/generated-helpers.h
GEN trace/generated-helpers.c
GEN module_block.h
GEN tests/test-qapi-types.h
GEN tests/test-qapi-visit.h
GEN tests/test-qmp-commands.h
GEN tests/test-qapi-event.h
GEN tests/test-qmp-introspect.h
GEN trace-root.h
GEN util/trace.h
Submodule 'capstone' (git://git.qemu.org/capstone.git) registered for path 'capstone'
Submodule 'ui/keycodemapdb' (git://git.qemu.org/keycodemapdb.git) registered for path 'ui/keycodemapdb'
GEN crypto/trace.h
GEN io/trace.h
Cloning into '/var/tmp/patchew-tester-tmp-zu_flv2_/src/capstone'...
GEN migration/trace.h
GEN block/trace.h
GEN chardev/trace.h
GEN hw/block/trace.h
GEN hw/block/dataplane/trace.h
GEN hw/char/trace.h
GEN hw/intc/trace.h
GEN hw/net/trace.h
GEN hw/virtio/trace.h
GEN hw/audio/trace.h
GEN hw/misc/trace.h
GEN hw/usb/trace.h
GEN hw/scsi/trace.h
GEN hw/nvram/trace.h
GEN hw/display/trace.h
GEN hw/input/trace.h
GEN hw/timer/trace.h
GEN hw/dma/trace.h
GEN hw/sparc/trace.h
GEN hw/sd/trace.h
GEN hw/isa/trace.h
GEN hw/mem/trace.h
GEN hw/i386/trace.h
GEN hw/i386/xen/trace.h
GEN hw/9pfs/trace.h
GEN hw/ppc/trace.h
GEN hw/pci/trace.h
GEN hw/s390x/trace.h
GEN hw/vfio/trace.h
GEN hw/acpi/trace.h
GEN hw/arm/trace.h
GEN hw/alpha/trace.h
GEN hw/xen/trace.h
GEN hw/ide/trace.h
GEN ui/trace.h
GEN audio/trace.h
GEN net/trace.h
GEN target/arm/trace.h
GEN target/i386/trace.h
GEN target/mips/trace.h
GEN target/sparc/trace.h
GEN target/s390x/trace.h
GEN target/ppc/trace.h
GEN qom/trace.h
GEN linux-user/trace.h
GEN qapi/trace.h
GEN accel/tcg/trace.h
GEN accel/kvm/trace.h
GEN nbd/trace.h
GEN scsi/trace.h
GEN trace-root.c
GEN util/trace.c
GEN crypto/trace.c
GEN io/trace.c
GEN migration/trace.c
GEN block/trace.c
GEN chardev/trace.c
GEN hw/block/trace.c
GEN hw/block/dataplane/trace.c
GEN hw/char/trace.c
GEN hw/intc/trace.c
GEN hw/net/trace.c
GEN hw/virtio/trace.c
GEN hw/audio/trace.c
GEN hw/misc/trace.c
GEN hw/usb/trace.c
GEN hw/scsi/trace.c
GEN hw/nvram/trace.c
GEN hw/display/trace.c
GEN hw/input/trace.c
GEN hw/timer/trace.c
GEN hw/dma/trace.c
GEN hw/sparc/trace.c
GEN hw/sd/trace.c
GEN hw/isa/trace.c
GEN hw/mem/trace.c
GEN hw/i386/trace.c
GEN hw/i386/xen/trace.c
GEN hw/9pfs/trace.c
GEN hw/ppc/trace.c
GEN hw/pci/trace.c
GEN hw/s390x/trace.c
GEN hw/vfio/trace.c
GEN hw/acpi/trace.c
GEN hw/arm/trace.c
GEN hw/alpha/trace.c
GEN hw/xen/trace.c
GEN hw/ide/trace.c
GEN ui/trace.c
GEN audio/trace.c
GEN net/trace.c
GEN target/arm/trace.c
GEN target/i386/trace.c
GEN target/mips/trace.c
GEN target/sparc/trace.c
GEN target/s390x/trace.c
GEN target/ppc/trace.c
GEN qom/trace.c
GEN linux-user/trace.c
GEN qapi/trace.c
GEN accel/tcg/trace.c
GEN accel/kvm/trace.c
GEN nbd/trace.c
GEN scsi/trace.c
GEN config-all-devices.mak
Cloning into '/var/tmp/patchew-tester-tmp-zu_flv2_/src/ui/keycodemapdb'...
GEN ui/input-keymap-linux-to-qcode.c
GEN ui/input-keymap-qcode-to-qnum.c
GEN ui/input-keymap-qnum-to-qcode.c
CC cs.o
GEN ui/input-keymap-qcode-to-linux.c
CC SStream.o
CC utils.o
CC MCInstrDesc.o
CC MCRegisterInfo.o
CC arch/ARM/ARMDisassembler.o
CC arch/ARM/ARMInstPrinter.o
CC arch/ARM/ARMMapping.o
CC arch/ARM/ARMModule.o
CC arch/AArch64/AArch64BaseInfo.o
CC arch/AArch64/AArch64Disassembler.o
CC arch/AArch64/AArch64InstPrinter.o
CC arch/AArch64/AArch64Mapping.o
CC arch/AArch64/AArch64Module.o
CC arch/Mips/MipsDisassembler.o
CC arch/Mips/MipsInstPrinter.o
CC arch/Mips/MipsMapping.o
CC arch/Mips/MipsModule.o
CC arch/PowerPC/PPCDisassembler.o
CC arch/PowerPC/PPCInstPrinter.o
CC arch/PowerPC/PPCMapping.o
CC arch/PowerPC/PPCModule.o
CC arch/Sparc/SparcDisassembler.o
CC arch/Sparc/SparcInstPrinter.o
CC arch/Sparc/SparcMapping.o
CC arch/Sparc/SparcModule.o
CC arch/SystemZ/SystemZDisassembler.o
CC arch/SystemZ/SystemZInstPrinter.o
CC arch/SystemZ/SystemZMapping.o
CC arch/SystemZ/SystemZModule.o
CC arch/SystemZ/SystemZMCTargetDesc.o
CC arch/X86/X86DisassemblerDecoder.o
CC arch/X86/X86Disassembler.o
CC arch/X86/X86IntelInstPrinter.o
CC arch/X86/X86ATTInstPrinter.o
CC arch/X86/X86Mapping.o
CC arch/X86/X86Module.o
CC arch/XCore/XCoreDisassembler.o
CC arch/XCore/XCoreInstPrinter.o
CC arch/XCore/XCoreMapping.o
CC arch/XCore/XCoreModule.o
CC MCInst.o
AR libcapstone.a
ar: creating /var/tmp/patchew-tester-tmp-zu_flv2_/src/build/capstone/libcapstone.a
make[1]: '/var/tmp/patchew-tester-tmp-zu_flv2_/src/build/capstone/libcapstone.a' is up to date.
CC tests/qemu-iotests/socket_scm_helper.o
GEN docs/version.texi
GEN qemu-monitor.texi
GEN qemu-options.texi
GEN qemu-img-cmds.texi
GEN qemu-monitor-info.texi
GEN qemu-img.1
GEN qemu-nbd.8
GEN qemu-ga.8
GEN docs/interop/qemu-qmp-qapi.texi
GEN docs/interop/qemu-ga-qapi.texi
GEN docs/qemu-block-drivers.7
GEN fsdev/virtfs-proxy-helper.1
GEN qga/qapi-generated/qga-qapi-types.h
GEN qga/qapi-generated/qga-qapi-visit.h
GEN qga/qapi-generated/qga-qmp-commands.h
GEN qga/qapi-generated/qga-qapi-types.c
GEN qga/qapi-generated/qga-qapi-visit.c
GEN qga/qapi-generated/qga-qmp-marshal.c
CC qmp-introspect.o
CC qapi-types.o
CC qapi-visit.o
CC qapi-event.o
CC qapi/qapi-visit-core.o
CC qapi/qapi-dealloc-visitor.o
CC qapi/qobject-input-visitor.o
CC qapi/qobject-output-visitor.o
CC qapi/qmp-registry.o
CC qapi/qmp-dispatch.o
CC qapi/string-input-visitor.o
CC qapi/string-output-visitor.o
CC qapi/opts-visitor.o
CC qapi/qapi-clone-visitor.o
CC qapi/qmp-event.o
CC qapi/qapi-util.o
CC qobject/qnull.o
CC qobject/qnum.o
CC qobject/qstring.o
CC qobject/qdict.o
CC qobject/qlist.o
CC qobject/qbool.o
CC qobject/qlit.o
CC qobject/qjson.o
CC qobject/qobject.o
CC qobject/json-lexer.o
CC qobject/json-streamer.o
CC qobject/json-parser.o
CC trace/control.o
CC trace/qmp.o
CC util/osdep.o
CC util/cutils.o
CC util/unicode.o
CC util/qemu-timer-common.o
CC util/bufferiszero.o
CC util/lockcnt.o
CC util/aiocb.o
CC util/async.o
CC util/thread-pool.o
CC util/qemu-timer.o
CC util/main-loop.o
CC util/iohandler.o
CC util/aio-posix.o
CC util/compatfd.o
CC util/event_notifier-posix.o
CC util/mmap-alloc.o
CC util/oslib-posix.o
CC util/qemu-openpty.o
CC util/qemu-thread-posix.o
CC util/memfd.o
CC util/envlist.o
CC util/path.o
CC util/module.o
CC util/host-utils.o
CC util/bitmap.o
CC util/bitops.o
CC util/hbitmap.o
CC util/fifo8.o
CC util/acl.o
CC util/cacheinfo.o
CC util/error.o
CC util/qemu-error.o
CC util/id.o
CC util/iov.o
CC util/qemu-config.o
CC util/qemu-sockets.o
CC util/uri.o
CC util/notify.o
CC util/qemu-option.o
CC util/qemu-progress.o
CC util/keyval.o
CC util/hexdump.o
CC util/crc32c.o
CC util/uuid.o
CC util/throttle.o
CC util/getauxval.o
CC util/readline.o
CC util/rcu.o
CC util/qemu-coroutine.o
CC util/qemu-coroutine-lock.o
CC util/qemu-coroutine-io.o
CC util/qemu-coroutine-sleep.o
CC util/coroutine-ucontext.o
CC util/buffer.o
CC util/timed-average.o
CC util/base64.o
CC util/log.o
CC util/pagesize.o
CC util/qdist.o
CC util/qht.o
CC util/range.o
CC util/stats64.o
CC util/systemd.o
CC trace-root.o
CC util/trace.o
CC crypto/trace.o
CC io/trace.o
CC migration/trace.o
CC block/trace.o
CC chardev/trace.o
CC hw/block/trace.o
CC hw/block/dataplane/trace.o
CC hw/char/trace.o
CC hw/intc/trace.o
CC hw/net/trace.o
CC hw/virtio/trace.o
CC hw/audio/trace.o
CC hw/misc/trace.o
CC hw/usb/trace.o
CC hw/scsi/trace.o
CC hw/nvram/trace.o
CC hw/display/trace.o
CC hw/input/trace.o
CC hw/timer/trace.o
CC hw/dma/trace.o
CC hw/sparc/trace.o
CC hw/sd/trace.o
CC hw/isa/trace.o
CC hw/mem/trace.o
CC hw/i386/trace.o
CC hw/i386/xen/trace.o
CC hw/9pfs/trace.o
CC hw/ppc/trace.o
CC hw/pci/trace.o
CC hw/s390x/trace.o
CC hw/vfio/trace.o
CC hw/acpi/trace.o
CC hw/arm/trace.o
CC hw/alpha/trace.o
CC hw/xen/trace.o
CC hw/ide/trace.o
CC ui/trace.o
CC audio/trace.o
CC net/trace.o
CC target/arm/trace.o
CC target/i386/trace.o
CC target/mips/trace.o
CC target/sparc/trace.o
CC target/s390x/trace.o
CC target/ppc/trace.o
CC qom/trace.o
CC linux-user/trace.o
CC qapi/trace.o
CC accel/tcg/trace.o
CC accel/kvm/trace.o
CC nbd/trace.o
CC scsi/trace.o
CC crypto/pbkdf-stub.o
CC stubs/arch-query-cpu-def.o
CC stubs/arch-query-cpu-model-expansion.o
CC stubs/arch-query-cpu-model-comparison.o
CC stubs/arch-query-cpu-model-baseline.o
CC stubs/bdrv-next-monitor-owned.o
CC stubs/blk-commit-all.o
CC stubs/blockdev-close-all-bdrv-states.o
CC stubs/clock-warp.o
CC stubs/cpu-get-clock.o
CC stubs/cpu-get-icount.o
CC stubs/dump.o
CC stubs/error-printf.o
CC stubs/fdset.o
CC stubs/gdbstub.o
CC stubs/get-vm-name.o
CC stubs/iothread.o
CC stubs/iothread-lock.o
CC stubs/is-daemonized.o
CC stubs/linux-aio.o
CC stubs/machine-init-done.o
CC stubs/migr-blocker.o
CC stubs/change-state-handler.o
CC stubs/monitor.o
CC stubs/notify-event.o
CC stubs/qtest.o
CC stubs/replay.o
CC stubs/runstate-check.o
CC stubs/set-fd-handler.o
CC stubs/slirp.o
CC stubs/sysbus.o
CC stubs/tpm.o
CC stubs/trace-control.o
CC stubs/uuid.o
CC stubs/vm-stop.o
CC stubs/vmstate.o
CC stubs/qmp_pc_dimm.o
CC stubs/target-monitor-defs.o
CC stubs/target-get-monitor-def.o
CC stubs/pc_madt_cpu_entry.o
CC stubs/vmgenid.o
CC stubs/xen-common.o
CC stubs/xen-hvm.o
CC stubs/pci-host-piix.o
CC qemu-keymap.o
CC ui/input-keymap.o
CC contrib/ivshmem-client/ivshmem-client.o
CC contrib/ivshmem-client/main.o
CC contrib/ivshmem-server/ivshmem-server.o
CC contrib/ivshmem-server/main.o
CC qemu-nbd.o
CC block.o
CC blockjob.o
CC qemu-io-cmds.o
CC replication.o
CC block/raw-format.o
CC block/qcow.o
CC block/vdi.o
CC block/vmdk.o
CC block/cloop.o
CC block/bochs.o
CC block/vpc.o
CC block/vvfat.o
CC block/dmg.o
CC block/qcow2.o
CC block/qcow2-refcount.o
CC block/qcow2-cluster.o
CC block/qcow2-snapshot.o
CC block/qcow2-cache.o
CC block/qcow2-bitmap.o
CC block/qed.o
CC block/qed-l2-cache.o
CC block/qed-table.o
CC block/qed-cluster.o
CC block/qed-check.o
CC block/vhdx.o
CC block/vhdx-endian.o
CC block/vhdx-log.o
CC block/quorum.o
CC block/parallels.o
CC block/blkdebug.o
CC block/blkverify.o
CC block/blkreplay.o
CC block/block-backend.o
CC block/snapshot.o
CC block/qapi.o
CC block/file-posix.o
CC block/linux-aio.o
CC block/null.o
CC block/mirror.o
CC block/commit.o
CC block/io.o
CC block/throttle-groups.o
CC block/nbd.o
CC block/nbd-client.o
CC block/sheepdog.o
CC block/iscsi-opts.o
CC block/accounting.o
CC block/dirty-bitmap.o
CC block/write-threshold.o
CC block/backup.o
CC block/replication.o
CC block/throttle.o
CC block/crypto.o
CC nbd/server.o
CC nbd/client.o
CC nbd/common.o
CC scsi/utils.o
CC scsi/pr-manager.o
CC scsi/pr-manager-helper.o
CC block/iscsi.o
CC block/nfs.o
CC block/curl.o
CC block/rbd.o
CC block/gluster.o
CC block/ssh.o
/var/tmp/patchew-tester-tmp-zu_flv2_/src/block/iscsi.c: In function ‘iscsi_co_block_status’:
/var/tmp/patchew-tester-tmp-zu_flv2_/src/block/iscsi.c:755:14: error: ‘iTask.task’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (iTask.task != NULL) {
~~~~~^~~~~
cc1: all warnings being treated as errors
make: *** [/var/tmp/patchew-tester-tmp-zu_flv2_/src/rules.mak:66: block/iscsi.o] Error 1
make: *** Waiting for unfinished jobs....
=== OUTPUT END ===
Test command exited with code: 2
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@freelists.org
^ permalink raw reply [flat|nested] 29+ messages in thread* Re: [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks
2018-01-07 6:03 ` [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks no-reply
@ 2018-01-08 2:56 ` Fam Zheng
2018-01-08 3:21 ` Fam Zheng
0 siblings, 1 reply; 29+ messages in thread
From: Fam Zheng @ 2018-01-08 2:56 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, kwolf, vsementsov, qemu-block, jcody, pl
On Sat, 01/06 22:03, no-reply@patchew.org wrote:
> /var/tmp/patchew-tester-tmp-zu_flv2_/src/block/iscsi.c: In function ‘iscsi_co_block_status’:
> /var/tmp/patchew-tester-tmp-zu_flv2_/src/block/iscsi.c:755:14: error: ‘iTask.task’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
> if (iTask.task != NULL) {
> ~~~~~^~~~~
> cc1: all warnings being treated as errors
> make: *** [/var/tmp/patchew-tester-tmp-zu_flv2_/src/rules.mak:66: block/iscsi.o] Error 1
> make: *** Waiting for unfinished jobs....
> === OUTPUT END ===
>
> Test command exited with code: 2
Seems introduced by e38bc23454ef763deb4405ebdee6a1081aa00bc8. I think the easy
fix is to initialize iTask.task to NULL.
Fam
^ permalink raw reply [flat|nested] 29+ messages in thread* Re: [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks
2018-01-08 2:56 ` Fam Zheng
@ 2018-01-08 3:21 ` Fam Zheng
0 siblings, 0 replies; 29+ messages in thread
From: Fam Zheng @ 2018-01-08 3:21 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, kwolf, vsementsov, qemu-block, jcody, pl
On Mon, 01/08 10:56, Fam Zheng wrote:
> On Sat, 01/06 22:03, no-reply@patchew.org wrote:
> > /var/tmp/patchew-tester-tmp-zu_flv2_/src/block/iscsi.c: In function ‘iscsi_co_block_status’:
> > /var/tmp/patchew-tester-tmp-zu_flv2_/src/block/iscsi.c:755:14: error: ‘iTask.task’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
> > if (iTask.task != NULL) {
> > ~~~~~^~~~~
> > cc1: all warnings being treated as errors
> > make: *** [/var/tmp/patchew-tester-tmp-zu_flv2_/src/rules.mak:66: block/iscsi.o] Error 1
> > make: *** Waiting for unfinished jobs....
> > === OUTPUT END ===
> >
> > Test command exited with code: 2
>
> Seems introduced by e38bc23454ef763deb4405ebdee6a1081aa00bc8. I think the easy
> fix is to initialize iTask.task to NULL.
I've posted a fix for this:
https://lists.gnu.org/archive/html/qemu-devel/2018-01/msg01132.html
Fam
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks
2018-01-05 22:57 [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks Eric Blake
` (20 preceding siblings ...)
2018-01-07 6:03 ` [Qemu-devel] [PATCH v7 00/20] add byte-based block_status driver callbacks no-reply
@ 2018-01-29 20:11 ` Eric Blake
21 siblings, 0 replies; 29+ messages in thread
From: Eric Blake @ 2018-01-29 20:11 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, jcody, vsementsov, famz, qemu-block
[-- Attachment #1: Type: text/plain, Size: 4851 bytes --]
ping
On 01/05/2018 04:57 PM, Eric Blake wrote:
> There are patches floating around to add NBD_CMD_BLOCK_STATUS,
> but NBD wants to report status on byte granularity (even if the
> reporting will probably be naturally aligned to sectors or even
> much higher levels). I've therefore started the task of
> converting our block status code to report at a byte granularity
> rather than sectors.
>
> These patches have been around for a while, but it's time to
> finish it now that 2.12 is open for patches.
>
> Based-on: <20171222151846.28110-1-kwolf@redhat.com>
> (Kevin's [PULL v3 00/35] Block layer patches)
>
> The overall conversion currently looks like:
> part 1: bdrv_is_allocated (merged, commit 51b0a488, 2.10)
> part 2: dirty-bitmap (merged, commit ca759622, 2.11)
> part 3: bdrv_get_block_status (merged, commit f0a9c18f, 2.11)
> part 4: .bdrv_co_block_status (this series, v5 was here [1])
>
> [1] https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg01246.html
>
> Available as a tag at:
> git fetch git://repo.or.cz/qemu/ericb.git nbd-byte-callback-v7
>
> Since v6:
> - add R-bs
> - improve some commit messages, comments, and variable types [Fam]
> - fix conversion bugs [Vladimir]
> - rebase to master (well, Kevin's pull request) [Jeff]
>
> 001/20:[----] [--] 'block: Add .bdrv_co_block_status() callback'
> 002/20:[----] [--] 'block: Switch passthrough drivers to .bdrv_co_block_status()'
> 003/20:[----] [--] 'file-posix: Switch to .bdrv_co_block_status()'
> 004/20:[----] [--] 'gluster: Switch to .bdrv_co_block_status()'
> 005/20:[----] [--] 'iscsi: Switch cluster_sectors to byte-based'
> 006/20:[0004] [FC] 'iscsi: Switch iscsi_allocmap_update() to byte-based'
> 007/20:[0006] [FC] 'iscsi: Switch to .bdrv_co_block_status()'
> 008/20:[----] [--] 'null: Switch to .bdrv_co_block_status()'
> 009/20:[0002] [FC] 'parallels: Switch to .bdrv_co_block_status()'
> 010/20:[----] [--] 'qcow: Switch to .bdrv_co_block_status()'
> 011/20:[----] [--] 'qcow2: Switch to .bdrv_co_block_status()'
> 012/20:[----] [--] 'qed: Switch to .bdrv_co_block_status()'
> 013/20:[----] [--] 'raw: Switch to .bdrv_co_block_status()'
> 014/20:[0012] [FC] 'sheepdog: Switch to .bdrv_co_block_status()'
> 015/20:[----] [--] 'vdi: Avoid bitrot of debugging code'
> 016/20:[----] [--] 'vdi: Switch to .bdrv_co_block_status()'
> 017/20:[----] [--] 'vmdk: Switch to .bdrv_co_block_status()'
> 018/20:[0002] [FC] 'vpc: Switch to .bdrv_co_block_status()'
> 019/20:[----] [--] 'vvfat: Switch to .bdrv_co_block_status()'
> 020/20:[----] [--] 'block: Drop unused .bdrv_co_get_block_status()'
>
> Eric Blake (20):
> block: Add .bdrv_co_block_status() callback
> block: Switch passthrough drivers to .bdrv_co_block_status()
> file-posix: Switch to .bdrv_co_block_status()
> gluster: Switch to .bdrv_co_block_status()
> iscsi: Switch cluster_sectors to byte-based
> iscsi: Switch iscsi_allocmap_update() to byte-based
> iscsi: Switch to .bdrv_co_block_status()
> null: Switch to .bdrv_co_block_status()
> parallels: Switch to .bdrv_co_block_status()
> qcow: Switch to .bdrv_co_block_status()
> qcow2: Switch to .bdrv_co_block_status()
> qed: Switch to .bdrv_co_block_status()
> raw: Switch to .bdrv_co_block_status()
> sheepdog: Switch to .bdrv_co_block_status()
> vdi: Avoid bitrot of debugging code
> vdi: Switch to .bdrv_co_block_status()
> vmdk: Switch to .bdrv_co_block_status()
> vpc: Switch to .bdrv_co_block_status()
> vvfat: Switch to .bdrv_co_block_status()
> block: Drop unused .bdrv_co_get_block_status()
>
> include/block/block.h | 14 ++---
> include/block/block_int.h | 51 +++++++++------
> block/io.c | 86 +++++++++++--------------
> block/blkdebug.c | 20 +++---
> block/commit.c | 2 +-
> block/file-posix.c | 62 +++++++++---------
> block/gluster.c | 70 ++++++++++-----------
> block/iscsi.c | 157 ++++++++++++++++++++++++----------------------
> block/mirror.c | 2 +-
> block/null.c | 23 +++----
> block/parallels.c | 22 ++++---
> block/qcow.c | 27 ++++----
> block/qcow2.c | 24 +++----
> block/qed.c | 84 +++++++++----------------
> block/raw-format.c | 16 ++---
> block/sheepdog.c | 26 ++++----
> block/throttle.c | 2 +-
> block/vdi.c | 45 +++++++------
> block/vmdk.c | 38 +++++------
> block/vpc.c | 45 ++++++-------
> block/vvfat.c | 16 +++--
> 21 files changed, 404 insertions(+), 428 deletions(-)
>
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 619 bytes --]
^ permalink raw reply [flat|nested] 29+ messages in thread