From: "Daniel P. Berrange" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Alex Bennée" <alex.bennee@linaro.org>,
"Fam Zheng" <famz@redhat.com>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Eric Blake" <eblake@redhat.com>,
"Markus Armbruster" <armbru@redhat.com>,
"Eduardo Habkost" <ehabkost@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Daniel P. Berrange" <berrange@redhat.com>
Subject: [Qemu-devel] [PATCH v4 07/13] qapi: force a UTF-8 locale for running Python
Date: Mon, 15 Jan 2018 17:02:37 +0000 [thread overview]
Message-ID: <20180115170243.24578-8-berrange@redhat.com> (raw)
In-Reply-To: <20180115170243.24578-1-berrange@redhat.com>
Python2 did not validate locale correctness when reading input data, so
would happily read UTF-8 data in non-UTF-8 locales. Python3 is strict so
if you try to read UTF-8 data in the C locale, it will raise an error
for any UTF-8 bytes that aren't representable in 7-bit ascii encoding.
e.g.
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 54: ordinal not in range(128)
Traceback (most recent call last):
File "/tmp/qemu-test/src/scripts/qapi-commands.py", line 317, in <module>
schema = QAPISchema(input_file)
File "/tmp/qemu-test/src/scripts/qapi.py", line 1468, in __init__
parser = QAPISchemaParser(open(fname, 'r'))
File "/tmp/qemu-test/src/scripts/qapi.py", line 301, in __init__
previously_included)
File "/tmp/qemu-test/src/scripts/qapi.py", line 348, in _include
exprs_include = QAPISchemaParser(fobj, previously_included, info)
File "/tmp/qemu-test/src/scripts/qapi.py", line 271, in __init__
self.src = fp.read()
File "/usr/lib64/python3.5/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
Many distros support a new C.UTF-8 locale that is like the C locale,
but with UTF-8 instead of 7-bit ASCII. That is not entirely portable
though, so this patch instead forces the en_US.UTF-8 locale, which
is pretty similar but more widely available.
We set LANG, rather than only LC_CTYPE, since generated source ought
to be independant of all of the user's locale settings.
This patch only forces UTF-8 for QAPI scripts, since that is the one
showing the immediate error under Python3 with C locale, but potentially
we ought to force this for all python scripts used in the build process.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
Makefile | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/Makefile b/Makefile
index d86ecd2dd4..fde91cc42d 100644
--- a/Makefile
+++ b/Makefile
@@ -17,6 +17,8 @@ ifneq ($(wildcard config-host.mak),)
all:
include config-host.mak
+PYTHON_UTF8 = LANG=en_US.UTF-8 $(PYTHON)
+
git-submodule-update:
.PHONY: git-submodule-update
@@ -471,17 +473,17 @@ qapi-py = $(SRC_PATH)/scripts/qapi.py $(SRC_PATH)/scripts/ordereddict.py
qga/qapi-generated/qga-qapi-types.c qga/qapi-generated/qga-qapi-types.h :\
$(SRC_PATH)/qga/qapi-schema.json $(SRC_PATH)/scripts/qapi-types.py $(qapi-py)
- $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-types.py \
+ $(call quiet-command,$(PYTHON_UTF8) $(SRC_PATH)/scripts/qapi-types.py \
$(gen-out-type) -o qga/qapi-generated -p "qga-" $<, \
"GEN","$@")
qga/qapi-generated/qga-qapi-visit.c qga/qapi-generated/qga-qapi-visit.h :\
$(SRC_PATH)/qga/qapi-schema.json $(SRC_PATH)/scripts/qapi-visit.py $(qapi-py)
- $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-visit.py \
+ $(call quiet-command,$(PYTHON_UTF8) $(SRC_PATH)/scripts/qapi-visit.py \
$(gen-out-type) -o qga/qapi-generated -p "qga-" $<, \
"GEN","$@")
qga/qapi-generated/qga-qmp-commands.h qga/qapi-generated/qga-qmp-marshal.c :\
$(SRC_PATH)/qga/qapi-schema.json $(SRC_PATH)/scripts/qapi-commands.py $(qapi-py)
- $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-commands.py \
+ $(call quiet-command,$(PYTHON_UTF8) $(SRC_PATH)/scripts/qapi-commands.py \
$(gen-out-type) -o qga/qapi-generated -p "qga-" $<, \
"GEN","$@")
@@ -502,27 +504,27 @@ qapi-modules = $(SRC_PATH)/qapi-schema.json $(SRC_PATH)/qapi/common.json \
qapi-types.c qapi-types.h :\
$(qapi-modules) $(SRC_PATH)/scripts/qapi-types.py $(qapi-py)
- $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-types.py \
+ $(call quiet-command,$(PYTHON_UTF8) $(SRC_PATH)/scripts/qapi-types.py \
$(gen-out-type) -o "." -b $<, \
"GEN","$@")
qapi-visit.c qapi-visit.h :\
$(qapi-modules) $(SRC_PATH)/scripts/qapi-visit.py $(qapi-py)
- $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-visit.py \
+ $(call quiet-command,$(PYTHON_UTF8) $(SRC_PATH)/scripts/qapi-visit.py \
$(gen-out-type) -o "." -b $<, \
"GEN","$@")
qapi-event.c qapi-event.h :\
$(qapi-modules) $(SRC_PATH)/scripts/qapi-event.py $(qapi-py)
- $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-event.py \
+ $(call quiet-command,$(PYTHON_UTF8) $(SRC_PATH)/scripts/qapi-event.py \
$(gen-out-type) -o "." $<, \
"GEN","$@")
qmp-commands.h qmp-marshal.c :\
$(qapi-modules) $(SRC_PATH)/scripts/qapi-commands.py $(qapi-py)
- $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-commands.py \
+ $(call quiet-command,$(PYTHON_UTF8) $(SRC_PATH)/scripts/qapi-commands.py \
$(gen-out-type) -o "." $<, \
"GEN","$@")
qmp-introspect.h qmp-introspect.c :\
$(qapi-modules) $(SRC_PATH)/scripts/qapi-introspect.py $(qapi-py)
- $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-introspect.py \
+ $(call quiet-command,$(PYTHON_UTF8) $(SRC_PATH)/scripts/qapi-introspect.py \
$(gen-out-type) -o "." $<, \
"GEN","$@")
@@ -792,10 +794,10 @@ qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/scripts/hxtool
docs/interop/qemu-qmp-qapi.texi docs/interop/qemu-ga-qapi.texi: $(SRC_PATH)/scripts/qapi2texi.py $(qapi-py)
docs/interop/qemu-qmp-qapi.texi: $(qapi-modules)
- $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi2texi.py $< > $@,"GEN","$@")
+ $(call quiet-command,$(PYTHON_UTF8) $(SRC_PATH)/scripts/qapi2texi.py $< > $@,"GEN","$@")
docs/interop/qemu-ga-qapi.texi: $(SRC_PATH)/qga/qapi-schema.json
- $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi2texi.py $< > $@,"GEN","$@")
+ $(call quiet-command,$(PYTHON_UTF8) $(SRC_PATH)/scripts/qapi2texi.py $< > $@,"GEN","$@")
qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi qemu-monitor-info.texi
qemu.1: qemu-option-trace.texi
--
2.14.3
next prev parent reply other threads:[~2018-01-15 17:03 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-15 17:02 [Qemu-devel] [PATCH v4 00/13] Support building with py2 or py3 Daniel P. Berrange
2018-01-15 17:02 ` [Qemu-devel] [PATCH v4 01/13] qapi: use items()/values() intead of iteritems()/itervalues() Daniel P. Berrange
2018-01-15 17:02 ` [Qemu-devel] [PATCH v4 02/13] qapi: Use OrderedDict from standard library if available Daniel P. Berrange
2018-01-15 17:02 ` [Qemu-devel] [PATCH v4 03/13] qapi: adapt to moved location of StringIO module in py3 Daniel P. Berrange
2018-01-15 17:02 ` [Qemu-devel] [PATCH v4 04/13] qapi: Adapt to moved location of 'maketrans' function " Daniel P. Berrange
2018-01-15 17:18 ` Eric Blake
2018-01-15 17:02 ` [Qemu-devel] [PATCH v4 05/13] qapi: remove '-q' arg to diff when comparing QAPI output Daniel P. Berrange
2018-01-15 17:08 ` Eric Blake
2018-01-15 17:02 ` [Qemu-devel] [PATCH v4 06/13] qapi: ensure stable sort ordering when checking QAPI entities Daniel P. Berrange
2018-01-15 17:02 ` Daniel P. Berrange [this message]
2018-01-15 17:15 ` [Qemu-devel] [PATCH v4 07/13] qapi: force a UTF-8 locale for running Python Eric Blake
2018-01-15 17:28 ` Daniel P. Berrange
2018-01-15 17:02 ` [Qemu-devel] [PATCH v4 08/13] scripts: ensure signrom treats data as bytes Daniel P. Berrange
2018-01-15 17:02 ` [Qemu-devel] [PATCH v4 09/13] configure: allow use of python 3 Daniel P. Berrange
2018-01-15 17:02 ` [Qemu-devel] [PATCH v4 10/13] input: add missing JIS keys to virtio input Daniel P. Berrange
2018-01-15 17:17 ` Eric Blake
2018-01-15 17:30 ` Daniel P. Berrange
2018-01-15 17:02 ` [Qemu-devel] [PATCH v4 11/13] ui: update keycodemapdb to get py3 fixes Daniel P. Berrange
2018-01-15 17:02 ` [Qemu-devel] [PATCH v4 12/13] travis: improve python version test coverage Daniel P. Berrange
2018-01-15 17:02 ` [Qemu-devel] [PATCH v4 13/13] docker: change Fedora images to run with python3 Daniel P. Berrange
2018-01-17 2:28 ` Fam Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180115170243.24578-8-berrange@redhat.com \
--to=berrange@redhat.com \
--cc=alex.bennee@linaro.org \
--cc=armbru@redhat.com \
--cc=eblake@redhat.com \
--cc=ehabkost@redhat.com \
--cc=f4bug@amsat.org \
--cc=famz@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).