From: John Snow <jsnow@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, jcody@redhat.com, qemu-devel@nongnu.org,
stefanha@redhat.com, mreitz@redhat.com,
John Snow <jsnow@redhat.com>
Subject: [Qemu-devel] [PATCH v2 11/13] block/mirror: remove block_job_sleep_ns calls
Date: Fri, 19 Jan 2018 15:58:45 -0500 [thread overview]
Message-ID: <20180119205847.7141-12-jsnow@redhat.com> (raw)
In-Reply-To: <20180119205847.7141-1-jsnow@redhat.com>
We're attempting to slacken the mirror loop in three different places,
but we can combine these three attempts. Combine the early loop call to
block_job_pause_point with the two late-loop calls to block_job_sleep_ns.
When delay_ns is 0 and it has not been SLICE_TIME since the last yield,
block_job_relax is merely a call to block_job_pause_point, so this should
be equivalent with the exception that if we have managed to not yield at
all in the last SLICE_TIME ns, we will now do so.
I am not sure that condition was possible,
so this loop should be equivalent.
Signed-off-by: John Snow <jsnow@redhat.com>
---
block/mirror.c | 22 +++++++++++-----------
block/trace-events | 2 +-
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/block/mirror.c b/block/mirror.c
index a0e0044de2..192e03694f 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -761,7 +761,7 @@ static void coroutine_fn mirror_run(void *opaque)
assert(!s->dbi);
s->dbi = bdrv_dirty_iter_new(s->dirty_bitmap);
for (;;) {
- uint64_t delay_ns = 0;
+ static uint64_t delay_ns = 0;
int64_t cnt, delta;
bool should_complete;
@@ -770,9 +770,16 @@ static void coroutine_fn mirror_run(void *opaque)
goto immediate_exit;
}
- block_job_pause_point(&s->common);
-
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
+
+ trace_mirror_before_relax(s, cnt, s->synced, delay_ns);
+ if (block_job_relax(&s->common, delay_ns)) {
+ if (!s->synced) {
+ goto immediate_exit;
+ }
+ }
+ delay_ns = 0;
+
/* s->common.offset contains the number of bytes already processed so
* far, cnt is the number of dirty bytes remaining and
* s->bytes_in_flight is the number of bytes currently being
@@ -849,15 +856,8 @@ static void coroutine_fn mirror_run(void *opaque)
}
ret = 0;
- trace_mirror_before_sleep(s, cnt, s->synced, delay_ns);
- if (!s->synced) {
- block_job_sleep_ns(&s->common, delay_ns);
- if (block_job_is_cancelled(&s->common)) {
- break;
- }
- } else if (!should_complete) {
+ if (s->synced && !should_complete) {
delay_ns = (s->in_flight == 0 && cnt == 0 ? SLICE_TIME : 0);
- block_job_sleep_ns(&s->common, delay_ns);
}
}
diff --git a/block/trace-events b/block/trace-events
index 11c8d5f590..60f36f929a 100644
--- a/block/trace-events
+++ b/block/trace-events
@@ -27,7 +27,7 @@ mirror_start(void *bs, void *s, void *opaque) "bs %p s %p opaque %p"
mirror_restart_iter(void *s, int64_t cnt) "s %p dirty count %"PRId64
mirror_before_flush(void *s) "s %p"
mirror_before_drain(void *s, int64_t cnt) "s %p dirty count %"PRId64
-mirror_before_sleep(void *s, int64_t cnt, int synced, uint64_t delay_ns) "s %p dirty count %"PRId64" synced %d delay %"PRIu64"ns"
+mirror_before_relax(void *s, int64_t cnt, int synced, uint64_t delay_ns) "s %p dirty count %"PRId64" synced %d delay %"PRIu64"ns"
mirror_one_iteration(void *s, int64_t offset, uint64_t bytes) "s %p offset %" PRId64 " bytes %" PRIu64
mirror_iteration_done(void *s, int64_t offset, uint64_t bytes, int ret) "s %p offset %" PRId64 " bytes %" PRIu64 " ret %d"
mirror_yield(void *s, int64_t cnt, int buf_free_count, int in_flight) "s %p dirty count %"PRId64" free buffers %d in_flight %d"
--
2.14.3
next prev parent reply other threads:[~2018-01-19 20:59 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-19 20:58 [Qemu-devel] [PATCH v2 00/13] blockjob: refactor mirror_throttle John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 01/13] blockjob: record time of last entrance John Snow
2018-02-07 22:05 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 02/13] blockjob: consolidate SLICE_TIME definition John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 03/13] blockjob: create block_job_relax John Snow
2018-02-07 22:12 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 04/13] blockjob: allow block_job_throttle to take delay_ns John Snow
2018-02-07 22:17 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 05/13] block/commit: use block_job_relax John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 06/13] block/stream: " John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 07/13] block/backup: " John Snow
2018-02-07 22:19 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 08/13] allow block_job_relax to return -ECANCELED John Snow
2018-02-07 22:27 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 09/13] block/backup: remove yield_and_check John Snow
2018-02-07 22:33 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 10/13] block/mirror: condense cancellation and relax calls John Snow
2018-02-07 22:36 ` Max Reitz
2018-01-19 20:58 ` John Snow [this message]
2018-02-07 22:46 ` [Qemu-devel] [PATCH v2 11/13] block/mirror: remove block_job_sleep_ns calls Max Reitz
2018-02-07 22:56 ` Max Reitz
2018-02-09 23:13 ` John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 12/13] blockjob: privatize block_job_sleep_ns John Snow
2018-02-07 22:47 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 13/13] blockjob: remove block_job_pause_point from interface John Snow
2018-02-07 22:50 ` Max Reitz
2018-01-19 21:14 ` [Qemu-devel] [PATCH v2 00/13] blockjob: refactor mirror_throttle no-reply
2018-01-30 20:25 ` John Snow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180119205847.7141-12-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=jcody@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).