From: John Snow <jsnow@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, jcody@redhat.com, qemu-devel@nongnu.org,
stefanha@redhat.com, mreitz@redhat.com,
John Snow <jsnow@redhat.com>
Subject: [Qemu-devel] [PATCH v2 01/13] blockjob: record time of last entrance
Date: Fri, 19 Jan 2018 15:58:35 -0500 [thread overview]
Message-ID: <20180119205847.7141-2-jsnow@redhat.com> (raw)
In-Reply-To: <20180119205847.7141-1-jsnow@redhat.com>
The mirror job makes a semi-inaccurate record of the last time we yielded
by recording the last time we left a "pause", but this doesn't always
correlate to the time we actually last successfully ceded control.
Record the time we last *exited* a yield centrally. In other words, record
the time we began execution of this job to know how long we have been
selfish for.
Signed-off-by: John Snow <jsnow@redhat.com>
---
block/mirror.c | 8 ++------
blockjob.c | 2 ++
include/block/blockjob.h | 5 +++++
3 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/block/mirror.c b/block/mirror.c
index c9badc1203..88f4e8964d 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -63,7 +63,6 @@ typedef struct MirrorBlockJob {
QSIMPLEQ_HEAD(, MirrorBuffer) buf_free;
int buf_free_count;
- uint64_t last_pause_ns;
unsigned long *in_flight_bitmap;
int in_flight;
int64_t bytes_in_flight;
@@ -596,8 +595,7 @@ static void mirror_throttle(MirrorBlockJob *s)
{
int64_t now = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
- if (now - s->last_pause_ns > SLICE_TIME) {
- s->last_pause_ns = now;
+ if (now - s->common.last_enter_ns > SLICE_TIME) {
block_job_sleep_ns(&s->common, 0);
} else {
block_job_pause_point(&s->common);
@@ -769,7 +767,6 @@ static void coroutine_fn mirror_run(void *opaque)
mirror_free_init(s);
- s->last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
if (!s->is_none_mode) {
ret = mirror_dirty_init(s);
if (ret < 0 || block_job_is_cancelled(&s->common)) {
@@ -803,7 +800,7 @@ static void coroutine_fn mirror_run(void *opaque)
* We do so every SLICE_TIME nanoseconds, or when there is an error,
* or when the source is clean, whichever comes first.
*/
- delta = qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - s->last_pause_ns;
+ delta = qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - s->common.last_enter_ns;
if (delta < SLICE_TIME &&
s->common.iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
if (s->in_flight >= MAX_IN_FLIGHT || s->buf_free_count == 0 ||
@@ -878,7 +875,6 @@ static void coroutine_fn mirror_run(void *opaque)
delay_ns = (s->in_flight == 0 && cnt == 0 ? SLICE_TIME : 0);
block_job_sleep_ns(&s->common, delay_ns);
}
- s->last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
}
immediate_exit:
diff --git a/blockjob.c b/blockjob.c
index f5cea84e73..2a9ff66b95 100644
--- a/blockjob.c
+++ b/blockjob.c
@@ -321,6 +321,7 @@ void block_job_start(BlockJob *job)
job->pause_count--;
job->busy = true;
job->paused = false;
+ job->last_enter_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
bdrv_coroutine_enter(blk_bs(job->blk), job->co);
}
@@ -786,6 +787,7 @@ static void block_job_do_yield(BlockJob *job, uint64_t ns)
job->busy = false;
block_job_unlock();
qemu_coroutine_yield();
+ job->last_enter_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
/* Set by block_job_enter before re-entering the coroutine. */
assert(job->busy);
diff --git a/include/block/blockjob.h b/include/block/blockjob.h
index 00403d9482..e965845c94 100644
--- a/include/block/blockjob.h
+++ b/include/block/blockjob.h
@@ -141,6 +141,11 @@ typedef struct BlockJob {
*/
QEMUTimer sleep_timer;
+ /**
+ * Timestamp of the last yield
+ */
+ uint64_t last_enter_ns;
+
/** Non-NULL if this job is part of a transaction */
BlockJobTxn *txn;
QLIST_ENTRY(BlockJob) txn_list;
--
2.14.3
next prev parent reply other threads:[~2018-01-19 20:59 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-19 20:58 [Qemu-devel] [PATCH v2 00/13] blockjob: refactor mirror_throttle John Snow
2018-01-19 20:58 ` John Snow [this message]
2018-02-07 22:05 ` [Qemu-devel] [PATCH v2 01/13] blockjob: record time of last entrance Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 02/13] blockjob: consolidate SLICE_TIME definition John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 03/13] blockjob: create block_job_relax John Snow
2018-02-07 22:12 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 04/13] blockjob: allow block_job_throttle to take delay_ns John Snow
2018-02-07 22:17 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 05/13] block/commit: use block_job_relax John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 06/13] block/stream: " John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 07/13] block/backup: " John Snow
2018-02-07 22:19 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 08/13] allow block_job_relax to return -ECANCELED John Snow
2018-02-07 22:27 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 09/13] block/backup: remove yield_and_check John Snow
2018-02-07 22:33 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 10/13] block/mirror: condense cancellation and relax calls John Snow
2018-02-07 22:36 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 11/13] block/mirror: remove block_job_sleep_ns calls John Snow
2018-02-07 22:46 ` Max Reitz
2018-02-07 22:56 ` Max Reitz
2018-02-09 23:13 ` John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 12/13] blockjob: privatize block_job_sleep_ns John Snow
2018-02-07 22:47 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 13/13] blockjob: remove block_job_pause_point from interface John Snow
2018-02-07 22:50 ` Max Reitz
2018-01-19 21:14 ` [Qemu-devel] [PATCH v2 00/13] blockjob: refactor mirror_throttle no-reply
2018-01-30 20:25 ` John Snow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180119205847.7141-2-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=jcody@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).