* [Qemu-devel] [PULL 01/29] osdep: Retry SETLK upon EINTR
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 02/29] hw/block: Fix pin-based interrupt behaviour of NVMe Kevin Wolf
` (28 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Fam Zheng <famz@redhat.com>
We could hit lock failure if there is a signal that makes fcntl return
-1 and errno set to EINTR. In this case we should retry.
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
util/osdep.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/util/osdep.c b/util/osdep.c
index 1231f9f876..a73de0e1ba 100644
--- a/util/osdep.c
+++ b/util/osdep.c
@@ -244,7 +244,9 @@ static int qemu_lock_fcntl(int fd, int64_t start, int64_t len, int fl_type)
.l_type = fl_type,
};
qemu_probe_lock_ops();
- ret = fcntl(fd, fcntl_op_setlk, &fl);
+ do {
+ ret = fcntl(fd, fcntl_op_setlk, &fl);
+ } while (ret == -1 && errno == EINTR);
return ret == -1 ? -errno : 0;
}
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 02/29] hw/block: Fix pin-based interrupt behaviour of NVMe
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 01/29] osdep: Retry SETLK upon EINTR Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 03/29] tests/.gitignore: Add test-bdrv-drain Kevin Wolf
` (27 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Hikaru Nishida <hikarupsp@gmail.com>
Pin-based interrupt of NVMe controller did not work properly
because using an obsolated function pci_irq_pulse().
To fix this, change to use pci_irq_assert() / pci_irq_deassert()
instead of pci_irq_pulse().
Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.h | 1 +
hw/block/nvme.c | 39 ++++++++++++++++++++++++++++++++++-----
2 files changed, 35 insertions(+), 5 deletions(-)
diff --git a/hw/block/nvme.h b/hw/block/nvme.h
index 6aab338ff5..7b62dad072 100644
--- a/hw/block/nvme.h
+++ b/hw/block/nvme.h
@@ -775,6 +775,7 @@ typedef struct NvmeCtrl {
uint32_t cmbsz;
uint32_t cmbloc;
uint8_t *cmbuf;
+ uint64_t irq_status;
char *serial;
NvmeNamespace *namespaces;
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 1ac356d3a5..51a58fefba 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -91,7 +91,19 @@ static uint8_t nvme_sq_empty(NvmeSQueue *sq)
return sq->head == sq->tail;
}
-static void nvme_isr_notify(NvmeCtrl *n, NvmeCQueue *cq)
+static void nvme_irq_check(NvmeCtrl *n)
+{
+ if (msix_enabled(&(n->parent_obj))) {
+ return;
+ }
+ if (~n->bar.intms & n->irq_status) {
+ pci_irq_assert(&n->parent_obj);
+ } else {
+ pci_irq_deassert(&n->parent_obj);
+ }
+}
+
+static void nvme_irq_assert(NvmeCtrl *n, NvmeCQueue *cq)
{
if (cq->irq_enabled) {
if (msix_enabled(&(n->parent_obj))) {
@@ -99,13 +111,28 @@ static void nvme_isr_notify(NvmeCtrl *n, NvmeCQueue *cq)
msix_notify(&(n->parent_obj), cq->vector);
} else {
trace_nvme_irq_pin();
- pci_irq_pulse(&n->parent_obj);
+ assert(cq->cqid < 64);
+ n->irq_status |= 1 << cq->cqid;
+ nvme_irq_check(n);
}
} else {
trace_nvme_irq_masked();
}
}
+static void nvme_irq_deassert(NvmeCtrl *n, NvmeCQueue *cq)
+{
+ if (cq->irq_enabled) {
+ if (msix_enabled(&(n->parent_obj))) {
+ return;
+ } else {
+ assert(cq->cqid < 64);
+ n->irq_status &= ~(1 << cq->cqid);
+ nvme_irq_check(n);
+ }
+ }
+}
+
static uint16_t nvme_map_prp(QEMUSGList *qsg, QEMUIOVector *iov, uint64_t prp1,
uint64_t prp2, uint32_t len, NvmeCtrl *n)
{
@@ -242,7 +269,7 @@ static void nvme_post_cqes(void *opaque)
sizeof(req->cqe));
QTAILQ_INSERT_TAIL(&sq->req_list, req, entry);
}
- nvme_isr_notify(n, cq);
+ nvme_irq_assert(n, cq);
}
static void nvme_enqueue_req_completion(NvmeCQueue *cq, NvmeRequest *req)
@@ -905,6 +932,7 @@ static void nvme_write_bar(NvmeCtrl *n, hwaddr offset, uint64_t data,
n->bar.intmc = n->bar.intms;
trace_nvme_mmio_intm_set(data & 0xffffffff,
n->bar.intmc);
+ nvme_irq_check(n);
break;
case 0x10: /* INTMC */
if (unlikely(msix_enabled(&(n->parent_obj)))) {
@@ -917,6 +945,7 @@ static void nvme_write_bar(NvmeCtrl *n, hwaddr offset, uint64_t data,
n->bar.intmc = n->bar.intms;
trace_nvme_mmio_intm_clr(data & 0xffffffff,
n->bar.intmc);
+ nvme_irq_check(n);
break;
case 0x14: /* CC */
trace_nvme_mmio_cfg(data & 0xffffffff);
@@ -1085,8 +1114,8 @@ static void nvme_process_db(NvmeCtrl *n, hwaddr addr, int val)
timer_mod(cq->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 500);
}
- if (cq->tail != cq->head) {
- nvme_isr_notify(n, cq);
+ if (cq->tail == cq->head) {
+ nvme_irq_deassert(n, cq);
}
} else {
/* Submission queue doorbell write */
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 03/29] tests/.gitignore: Add test-bdrv-drain
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 01/29] osdep: Retry SETLK upon EINTR Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 02/29] hw/block: Fix pin-based interrupt behaviour of NVMe Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 04/29] tests/qemu-iotests: adding savevm/loadvm with postcopy flag test Kevin Wolf
` (26 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
Commit 881cfd17 added a new test binary, include it in .gitignore.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
tests/.gitignore | 1 +
1 file changed, 1 insertion(+)
diff --git a/tests/.gitignore b/tests/.gitignore
index 74e55d7264..e5c744b7ed 100644
--- a/tests/.gitignore
+++ b/tests/.gitignore
@@ -18,6 +18,7 @@ test-aio
test-aio-multithread
test-arm-mptimer
test-base64
+test-bdrv-drain
test-bitops
test-bitcnt
test-blockjob
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 04/29] tests/qemu-iotests: adding savevm/loadvm with postcopy flag test
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (2 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 03/29] tests/.gitignore: Add test-bdrv-drain Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 05/29] qcow2: Repair unaligned preallocated zero clusters Kevin Wolf
` (25 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
This patch implements a test case for the scenario that was failing
prior to the patch "migration/ram.c: do not set 'postcopy_running' in
POSTCOPY_INCOMING_END", commit acab30b85d.
This new test file 201 was derived from the test file 181 authored
by Kevin Wolf.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/201 | 120 +++++++++++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/201.out | 23 +++++++++
tests/qemu-iotests/group | 1 +
3 files changed, 144 insertions(+)
create mode 100755 tests/qemu-iotests/201
create mode 100644 tests/qemu-iotests/201.out
diff --git a/tests/qemu-iotests/201 b/tests/qemu-iotests/201
new file mode 100755
index 0000000000..11f640f5df
--- /dev/null
+++ b/tests/qemu-iotests/201
@@ -0,0 +1,120 @@
+#!/bin/bash
+#
+# Test savevm and loadvm after live migration with postcopy flag
+#
+# Copyright (C) 2017, IBM Corporation.
+#
+# This file is derived from tests/qemu-iotests/181 by Kevin Wolf
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+
+MIG_SOCKET="${TEST_DIR}/migrate"
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+. ./common.qemu
+
+_cleanup()
+{
+ rm -f "${MIG_SOCKET}"
+ _cleanup_test_img
+ _cleanup_qemu
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_supported_fmt qcow2
+_supported_proto generic
+_supported_os Linux
+
+# Internal snapshots are (currently) impossible with refcount_bits=1
+# This was taken from test 080
+_unsupported_imgopts 'refcount_bits=1[^0-9]'
+
+size=64M
+_make_test_img $size
+
+echo
+echo === Starting VMs ===
+echo
+
+qemu_comm_method="monitor"
+
+if [ "$IMGOPTSSYNTAX" = "true" ]; then
+ _launch_qemu \
+ -drive "${TEST_IMG}",cache=${CACHEMODE},id=disk
+else
+ _launch_qemu \
+ -drive file="${TEST_IMG}",cache=${CACHEMODE},driver=$IMGFMT,id=disk
+fi
+src=$QEMU_HANDLE
+
+if [ "$IMGOPTSSYNTAX" = "true" ]; then
+ _launch_qemu \
+ -drive "${TEST_IMG}",cache=${CACHEMODE},id=disk \
+ -incoming "unix:${MIG_SOCKET}"
+else
+ _launch_qemu \
+ -drive file="${TEST_IMG}",cache=${CACHEMODE},driver=$IMGFMT,id=disk \
+ -incoming "unix:${MIG_SOCKET}"
+fi
+dest=$QEMU_HANDLE
+
+echo
+echo === Set \'migrate_set_capability postcopy-ram on\' and migrate ===
+echo
+
+silent=yes
+_send_qemu_cmd $dest 'migrate_set_capability postcopy-ram on' "(qemu)"
+_send_qemu_cmd $src 'migrate_set_capability postcopy-ram on' "(qemu)"
+_send_qemu_cmd $src "migrate -d unix:${MIG_SOCKET}" "(qemu)"
+
+QEMU_COMM_TIMEOUT=1 qemu_cmd_repeat=10 silent=yes \
+ _send_qemu_cmd $src "info migrate" "completed\|failed"
+silent=yes _send_qemu_cmd $src "" "(qemu)"
+
+echo
+echo === Check if migration was successful ===
+echo
+
+QEMU_COMM_TIMEOUT=1 silent=yes \
+ _send_qemu_cmd $src "info migrate" "completed"
+silent=yes _send_qemu_cmd $src "" "(qemu)"
+
+echo
+echo === On destination, execute savevm and loadvm ===
+echo
+
+silent=
+_send_qemu_cmd $dest 'savevm state1' "(qemu)"
+_send_qemu_cmd $dest 'loadvm state1' "(qemu)"
+
+echo
+echo === Shut down and check image ===
+echo
+
+_send_qemu_cmd $src 'quit' ""
+_send_qemu_cmd $dest 'quit' ""
+wait=1 _cleanup_qemu
+
+_check_test_img
+
+# success, all done
+echo "*** done"
+status=0
diff --git a/tests/qemu-iotests/201.out b/tests/qemu-iotests/201.out
new file mode 100644
index 0000000000..9faf06f996
--- /dev/null
+++ b/tests/qemu-iotests/201.out
@@ -0,0 +1,23 @@
+QA output created by 201
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+
+=== Starting VMs ===
+
+
+=== Set 'migrate_set_capability postcopy-ram on' and migrate ===
+
+
+=== Check if migration was successful ===
+
+
+=== On destination, execute savevm and loadvm ===
+
+(qemu) savevm state1
+(qemu) loadvm state1
+
+=== Shut down and check image ===
+
+(qemu) quit
+(qemu) quit
+No errors were found on the image.
+*** done
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index 93d96fb22f..c4703cd782 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -197,5 +197,6 @@
197 rw auto quick
198 rw auto
200 rw auto
+201 rw auto migration
202 rw auto quick
203 rw auto
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 05/29] qcow2: Repair unaligned preallocated zero clusters
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (3 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 04/29] tests/qemu-iotests: adding savevm/loadvm with postcopy flag test Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 06/29] iotests: Make BD-{remove, insert}-medium use @id Kevin Wolf
` (24 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
We can easily repair unaligned preallocated zero clusters by discarding
them, so why not do it?
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110203759.14018-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block/qcow2-refcount.c | 70 ++++++++++++++++++++++++++++++++++++++--------
tests/qemu-iotests/060 | 3 +-
tests/qemu-iotests/060.out | 9 ++++++
3 files changed, 69 insertions(+), 13 deletions(-)
diff --git a/block/qcow2-refcount.c b/block/qcow2-refcount.c
index 3de1ab51ba..92701ab7af 100644
--- a/block/qcow2-refcount.c
+++ b/block/qcow2-refcount.c
@@ -1508,7 +1508,7 @@ enum {
static int check_refcounts_l2(BlockDriverState *bs, BdrvCheckResult *res,
void **refcount_table,
int64_t *refcount_table_size, int64_t l2_offset,
- int flags)
+ int flags, BdrvCheckMode fix)
{
BDRVQcow2State *s = bs->opaque;
uint64_t *l2_table, l2_entry;
@@ -1579,6 +1579,57 @@ static int check_refcounts_l2(BlockDriverState *bs, BdrvCheckResult *res,
next_contiguous_offset = offset + s->cluster_size;
}
+ /* Correct offsets are cluster aligned */
+ if (offset_into_cluster(s, offset)) {
+ if (qcow2_get_cluster_type(l2_entry) ==
+ QCOW2_CLUSTER_ZERO_ALLOC)
+ {
+ fprintf(stderr, "%s offset=%" PRIx64 ": Preallocated zero "
+ "cluster is not properly aligned; L2 entry "
+ "corrupted.\n",
+ fix & BDRV_FIX_ERRORS ? "Repairing" : "ERROR",
+ offset);
+ if (fix & BDRV_FIX_ERRORS) {
+ uint64_t l2e_offset =
+ l2_offset + (uint64_t)i * sizeof(uint64_t);
+
+ l2_entry = QCOW_OFLAG_ZERO;
+ l2_table[i] = cpu_to_be64(l2_entry);
+ ret = qcow2_pre_write_overlap_check(bs,
+ QCOW2_OL_ACTIVE_L2 | QCOW2_OL_INACTIVE_L2,
+ l2e_offset, sizeof(uint64_t));
+ if (ret < 0) {
+ fprintf(stderr, "ERROR: Overlap check failed\n");
+ res->check_errors++;
+ /* Something is seriously wrong, so abort checking
+ * this L2 table */
+ goto fail;
+ }
+
+ ret = bdrv_pwrite_sync(bs->file, l2e_offset,
+ &l2_table[i], sizeof(uint64_t));
+ if (ret < 0) {
+ fprintf(stderr, "ERROR: Failed to overwrite L2 "
+ "table entry: %s\n", strerror(-ret));
+ res->check_errors++;
+ /* Do not abort, continue checking the rest of this
+ * L2 table's entries */
+ } else {
+ res->corruptions_fixed++;
+ /* Skip marking the cluster as used
+ * (it is unused now) */
+ continue;
+ }
+ } else {
+ res->corruptions++;
+ }
+ } else {
+ fprintf(stderr, "ERROR offset=%" PRIx64 ": Data cluster is "
+ "not properly aligned; L2 entry corrupted.\n", offset);
+ res->corruptions++;
+ }
+ }
+
/* Mark cluster as used */
ret = qcow2_inc_refcounts_imrt(bs, res,
refcount_table, refcount_table_size,
@@ -1586,13 +1637,6 @@ static int check_refcounts_l2(BlockDriverState *bs, BdrvCheckResult *res,
if (ret < 0) {
goto fail;
}
-
- /* Correct offsets are cluster aligned */
- if (offset_into_cluster(s, offset)) {
- fprintf(stderr, "ERROR offset=%" PRIx64 ": Cluster is not "
- "properly aligned; L2 entry corrupted.\n", offset);
- res->corruptions++;
- }
break;
}
@@ -1626,7 +1670,7 @@ static int check_refcounts_l1(BlockDriverState *bs,
void **refcount_table,
int64_t *refcount_table_size,
int64_t l1_table_offset, int l1_size,
- int flags)
+ int flags, BdrvCheckMode fix)
{
BDRVQcow2State *s = bs->opaque;
uint64_t *l1_table = NULL, l2_offset, l1_size2;
@@ -1681,7 +1725,8 @@ static int check_refcounts_l1(BlockDriverState *bs,
/* Process and check L2 entries */
ret = check_refcounts_l2(bs, res, refcount_table,
- refcount_table_size, l2_offset, flags);
+ refcount_table_size, l2_offset, flags,
+ fix);
if (ret < 0) {
goto fail;
}
@@ -1957,7 +2002,8 @@ static int calculate_refcounts(BlockDriverState *bs, BdrvCheckResult *res,
/* current L1 table */
ret = check_refcounts_l1(bs, res, refcount_table, nb_clusters,
- s->l1_table_offset, s->l1_size, CHECK_FRAG_INFO);
+ s->l1_table_offset, s->l1_size, CHECK_FRAG_INFO,
+ fix);
if (ret < 0) {
return ret;
}
@@ -1966,7 +2012,7 @@ static int calculate_refcounts(BlockDriverState *bs, BdrvCheckResult *res,
for (i = 0; i < s->nb_snapshots; i++) {
sn = s->snapshots + i;
ret = check_refcounts_l1(bs, res, refcount_table, nb_clusters,
- sn->l1_table_offset, sn->l1_size, 0);
+ sn->l1_table_offset, sn->l1_size, 0, fix);
if (ret < 0) {
return ret;
}
diff --git a/tests/qemu-iotests/060 b/tests/qemu-iotests/060
index 14797dd3b0..6c7407f499 100755
--- a/tests/qemu-iotests/060
+++ b/tests/qemu-iotests/060
@@ -335,7 +335,8 @@ poke_file "$TEST_IMG" "$l2_offset" "\x80\x00\x00\x00\x00\x00\x2a\x01"
# Let's write to it!
$QEMU_IO -c "write 0 64k" "$TEST_IMG" | _filter_qemu_io
-# Can't repair this yet (TODO: We can just deallocate the cluster)
+echo '--- Repairing ---'
+_check_test_img -r all
echo
echo '=== Discarding with an unaligned refblock ==='
diff --git a/tests/qemu-iotests/060.out b/tests/qemu-iotests/060.out
index c4cb7c665e..25d5c3938b 100644
--- a/tests/qemu-iotests/060.out
+++ b/tests/qemu-iotests/060.out
@@ -317,6 +317,15 @@ discard 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qcow2: Marking image as corrupt: Preallocated zero cluster offset 0x2a00 unaligned (guest offset: 0); further corruption events will be suppressed
write failed: Input/output error
+--- Repairing ---
+Repairing offset=2a00: Preallocated zero cluster is not properly aligned; L2 entry corrupted.
+The following inconsistencies were found and repaired:
+
+ 0 leaked clusters
+ 1 corruptions
+
+Double checking the fixed image now...
+No errors were found on the image.
=== Discarding with an unaligned refblock ===
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 06/29] iotests: Make BD-{remove, insert}-medium use @id
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (4 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 05/29] qcow2: Repair unaligned preallocated zero clusters Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-02-12 11:16 ` Christian Borntraeger
2018-01-23 14:01 ` [Qemu-devel] [PULL 07/29] tests/ahci: Switch tray and medium commands to @id Kevin Wolf
` (23 subsequent siblings)
29 siblings, 1 reply; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
In some cases, these commands still use the deprecated @device
parameter. Fix that so we can later drop that parameter from their
interface.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-2-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/118 | 184 +++++++++++++++++++++++--------------------------
tests/qemu-iotests/155 | 60 ++++++++--------
2 files changed, 113 insertions(+), 131 deletions(-)
diff --git a/tests/qemu-iotests/118 b/tests/qemu-iotests/118
index 8a9e838c90..ca6965d23c 100755
--- a/tests/qemu-iotests/118
+++ b/tests/qemu-iotests/118
@@ -28,6 +28,14 @@ from iotests import qemu_img
old_img = os.path.join(iotests.test_dir, 'test0.img')
new_img = os.path.join(iotests.test_dir, 'test1.img')
+def interface_to_device_name(interface):
+ if interface == 'ide':
+ return 'ide-cd'
+ elif interface == 'floppy':
+ return 'floppy'
+ else:
+ return None
+
class ChangeBaseClass(iotests.QMPTestCase):
has_opened = False
has_closed = False
@@ -63,7 +71,7 @@ class ChangeBaseClass(iotests.QMPTestCase):
class GeneralChangeTestsBaseClass(ChangeBaseClass):
- device_name = None
+ device_name = 'qdev0'
def test_change(self):
result = self.vm.qmp('change', device='drive0', target=new_img,
@@ -79,14 +87,9 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
def test_blockdev_change_medium(self):
- if self.device_name is not None:
- result = self.vm.qmp('blockdev-change-medium',
- id=self.device_name, filename=new_img,
- format=iotests.imgfmt)
- else:
- result = self.vm.qmp('blockdev-change-medium',
- device='drive0', filename=new_img,
- format=iotests.imgfmt)
+ result = self.vm.qmp('blockdev-change-medium',
+ id=self.device_name, filename=new_img,
+ format=iotests.imgfmt)
self.assert_qmp(result, 'return', {})
@@ -99,10 +102,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
def test_eject(self):
- if self.device_name is not None:
- result = self.vm.qmp('eject', id=self.device_name, force=True)
- else:
- result = self.vm.qmp('eject', device='drive0', force=True)
+ result = self.vm.qmp('eject', id=self.device_name, force=True)
self.assert_qmp(result, 'return', {})
self.wait_for_open()
@@ -113,10 +113,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
self.assert_qmp_absent(result, 'return[0]/inserted')
def test_tray_eject_change(self):
- if self.device_name is not None:
- result = self.vm.qmp('eject', id=self.device_name, force=True)
- else:
- result = self.vm.qmp('eject', device='drive0', force=True)
+ result = self.vm.qmp('eject', id=self.device_name, force=True)
self.assert_qmp(result, 'return', {})
self.wait_for_open()
@@ -126,12 +123,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/tray_open', True)
self.assert_qmp_absent(result, 'return[0]/inserted')
- if self.device_name is not None:
- result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
- filename=new_img, format=iotests.imgfmt)
- else:
- result = self.vm.qmp('blockdev-change-medium', device='drive0',
- filename=new_img, format=iotests.imgfmt)
+ result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
+ filename=new_img, format=iotests.imgfmt)
self.assert_qmp(result, 'return', {})
self.wait_for_close()
@@ -142,12 +135,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
def test_tray_open_close(self):
- if self.device_name is not None:
- result = self.vm.qmp('blockdev-open-tray',
- id=self.device_name, force=True)
- else:
- result = self.vm.qmp('blockdev-open-tray',
- device='drive0', force=True)
+ result = self.vm.qmp('blockdev-open-tray',
+ id=self.device_name, force=True)
self.assert_qmp(result, 'return', {})
self.wait_for_open()
@@ -160,10 +149,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
else:
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
- if self.device_name is not None:
- result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
- else:
- result = self.vm.qmp('blockdev-close-tray', device='drive0')
+ result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
self.assert_qmp(result, 'return', {})
if self.has_real_tray or not self.was_empty:
@@ -178,7 +164,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
def test_tray_eject_close(self):
- result = self.vm.qmp('eject', device='drive0', force=True)
+ result = self.vm.qmp('eject', id=self.device_name, force=True)
self.assert_qmp(result, 'return', {})
self.wait_for_open()
@@ -188,10 +174,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/tray_open', True)
self.assert_qmp_absent(result, 'return[0]/inserted')
- if self.device_name is not None:
- result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
- else:
- result = self.vm.qmp('blockdev-close-tray', device='drive0')
+ result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
self.assert_qmp(result, 'return', {})
self.wait_for_close()
@@ -202,7 +185,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
self.assert_qmp_absent(result, 'return[0]/inserted')
def test_tray_open_change(self):
- result = self.vm.qmp('blockdev-open-tray', device='drive0', force=True)
+ result = self.vm.qmp('blockdev-open-tray', id=self.device_name,
+ force=True)
self.assert_qmp(result, 'return', {})
self.wait_for_open()
@@ -215,7 +199,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
else:
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
- result = self.vm.qmp('blockdev-change-medium', device='drive0',
+ result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
filename=new_img,
format=iotests.imgfmt)
self.assert_qmp(result, 'return', {})
@@ -235,12 +219,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
'driver': 'file'})
self.assert_qmp(result, 'return', {})
- if self.device_name is not None:
- result = self.vm.qmp('blockdev-open-tray',
- id=self.device_name, force=True)
- else:
- result = self.vm.qmp('blockdev-open-tray',
- device='drive0', force=True)
+ result = self.vm.qmp('blockdev-open-tray',
+ id=self.device_name, force=True)
self.assert_qmp(result, 'return', {})
self.wait_for_open()
@@ -253,11 +233,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
else:
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
- if self.device_name is not None:
- result = self.vm.qmp('x-blockdev-remove-medium',
- id=self.device_name)
- else:
- result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
+ result = self.vm.qmp('x-blockdev-remove-medium',
+ id=self.device_name)
self.assert_qmp(result, 'return', {})
result = self.vm.qmp('query-block')
@@ -265,12 +242,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/tray_open', True)
self.assert_qmp_absent(result, 'return[0]/inserted')
- if self.device_name is not None:
- result = self.vm.qmp('x-blockdev-insert-medium',
- id=self.device_name, node_name='new')
- else:
- result = self.vm.qmp('x-blockdev-insert-medium',
- device='drive0', node_name='new')
+ result = self.vm.qmp('x-blockdev-insert-medium',
+ id=self.device_name, node_name='new')
self.assert_qmp(result, 'return', {})
result = self.vm.qmp('query-block')
@@ -278,10 +251,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/tray_open', True)
self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
- if self.device_name is not None:
- result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
- else:
- result = self.vm.qmp('blockdev-close-tray', device='drive0')
+ result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
self.assert_qmp(result, 'return', {})
self.wait_for_close()
@@ -292,7 +262,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
def test_close_on_closed(self):
- result = self.vm.qmp('blockdev-close-tray', device='drive0')
+ result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
# Should be a no-op
self.assert_qmp(result, 'return', {})
self.assertEquals(self.vm.get_qmp_events(wait=False), [])
@@ -301,7 +271,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
if not self.has_real_tray:
return
- result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
+ result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
self.assert_qmp(result, 'error/class', 'GenericError')
def test_insert_on_closed(self):
@@ -315,7 +285,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
'driver': 'file'})
self.assert_qmp(result, 'return', {})
- result = self.vm.qmp('x-blockdev-insert-medium', device='drive0',
+ result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
node_name='new')
self.assert_qmp(result, 'error/class', 'GenericError')
@@ -326,12 +296,10 @@ class TestInitiallyFilled(GeneralChangeTestsBaseClass):
qemu_img('create', '-f', iotests.imgfmt, old_img, '1440k')
qemu_img('create', '-f', iotests.imgfmt, new_img, '1440k')
self.vm = iotests.VM()
- if interface == 'ide':
- self.device_name = 'qdev0'
- self.vm.add_drive(old_img, 'media=%s' % media, 'none')
- self.vm.add_device('ide-cd,drive=drive0,id=%s' % self.device_name)
- else:
- self.vm.add_drive(old_img, 'media=%s' % media, interface)
+ self.vm.add_drive(old_img, 'media=%s' % media, 'none')
+ self.vm.add_device('%s,drive=drive0,id=%s' %
+ (interface_to_device_name(interface),
+ self.device_name))
self.vm.launch()
def tearDown(self):
@@ -347,12 +315,12 @@ class TestInitiallyFilled(GeneralChangeTestsBaseClass):
'driver': 'file'})
self.assert_qmp(result, 'return', {})
- result = self.vm.qmp('blockdev-open-tray', device='drive0')
+ result = self.vm.qmp('blockdev-open-tray', id=self.device_name)
self.assert_qmp(result, 'return', {})
self.wait_for_open()
- result = self.vm.qmp('x-blockdev-insert-medium', device='drive0',
+ result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
node_name='new')
self.assert_qmp(result, 'error/class', 'GenericError')
@@ -361,7 +329,10 @@ class TestInitiallyEmpty(GeneralChangeTestsBaseClass):
def setUp(self, media, interface):
qemu_img('create', '-f', iotests.imgfmt, new_img, '1440k')
- self.vm = iotests.VM().add_drive(None, 'media=%s' % media, interface)
+ self.vm = iotests.VM().add_drive(None, 'media=%s' % media, 'none')
+ self.vm.add_device('%s,drive=drive0,id=%s' %
+ (interface_to_device_name(interface),
+ self.device_name))
self.vm.launch()
def tearDown(self):
@@ -369,12 +340,12 @@ class TestInitiallyEmpty(GeneralChangeTestsBaseClass):
os.remove(new_img)
def test_remove_on_empty(self):
- result = self.vm.qmp('blockdev-open-tray', device='drive0')
+ result = self.vm.qmp('blockdev-open-tray', id=self.device_name)
self.assert_qmp(result, 'return', {})
self.wait_for_open()
- result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
+ result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
# Should be a no-op
self.assert_qmp(result, 'return', {})
@@ -410,6 +381,8 @@ class TestFloppyInitiallyEmpty(TestInitiallyEmpty):
self.has_opened = True
class TestChangeReadOnly(ChangeBaseClass):
+ device_name = 'qdev0'
+
def setUp(self):
qemu_img('create', '-f', iotests.imgfmt, old_img, '1440k')
qemu_img('create', '-f', iotests.imgfmt, new_img, '1440k')
@@ -425,14 +398,15 @@ class TestChangeReadOnly(ChangeBaseClass):
def test_ro_ro_retain(self):
os.chmod(old_img, 0444)
os.chmod(new_img, 0444)
- self.vm.add_drive(old_img, 'media=disk,read-only=on', 'floppy')
+ self.vm.add_drive(old_img, 'media=disk,read-only=on', 'none')
+ self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
self.vm.launch()
result = self.vm.qmp('query-block')
self.assert_qmp(result, 'return[0]/inserted/ro', True)
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
- result = self.vm.qmp('blockdev-change-medium', device='drive0',
+ result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
filename=new_img,
format=iotests.imgfmt,
read_only_mode='retain')
@@ -444,14 +418,15 @@ class TestChangeReadOnly(ChangeBaseClass):
def test_ro_rw_retain(self):
os.chmod(old_img, 0444)
- self.vm.add_drive(old_img, 'media=disk,read-only=on', 'floppy')
+ self.vm.add_drive(old_img, 'media=disk,read-only=on', 'none')
+ self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
self.vm.launch()
result = self.vm.qmp('query-block')
self.assert_qmp(result, 'return[0]/inserted/ro', True)
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
- result = self.vm.qmp('blockdev-change-medium', device='drive0',
+ result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
filename=new_img,
format=iotests.imgfmt,
read_only_mode='retain')
@@ -463,14 +438,15 @@ class TestChangeReadOnly(ChangeBaseClass):
def test_rw_ro_retain(self):
os.chmod(new_img, 0444)
- self.vm.add_drive(old_img, 'media=disk', 'floppy')
+ self.vm.add_drive(old_img, 'media=disk', 'none')
+ self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
self.vm.launch()
result = self.vm.qmp('query-block')
self.assert_qmp(result, 'return[0]/inserted/ro', False)
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
- result = self.vm.qmp('blockdev-change-medium', device='drive0',
+ result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
filename=new_img,
format=iotests.imgfmt,
read_only_mode='retain')
@@ -484,7 +460,8 @@ class TestChangeReadOnly(ChangeBaseClass):
def test_ro_rw(self):
os.chmod(old_img, 0444)
- self.vm.add_drive(old_img, 'media=disk,read-only=on', 'floppy')
+ self.vm.add_drive(old_img, 'media=disk,read-only=on', 'none')
+ self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
self.vm.launch()
result = self.vm.qmp('query-block')
@@ -492,7 +469,7 @@ class TestChangeReadOnly(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
result = self.vm.qmp('blockdev-change-medium',
- device='drive0',
+ id=self.device_name,
filename=new_img,
format=iotests.imgfmt,
read_only_mode='read-write')
@@ -504,7 +481,8 @@ class TestChangeReadOnly(ChangeBaseClass):
def test_rw_ro(self):
os.chmod(new_img, 0444)
- self.vm.add_drive(old_img, 'media=disk', 'floppy')
+ self.vm.add_drive(old_img, 'media=disk', 'none')
+ self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
self.vm.launch()
result = self.vm.qmp('query-block')
@@ -512,7 +490,7 @@ class TestChangeReadOnly(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
result = self.vm.qmp('blockdev-change-medium',
- device='drive0',
+ id=self.device_name,
filename=new_img,
format=iotests.imgfmt,
read_only_mode='read-only')
@@ -523,7 +501,8 @@ class TestChangeReadOnly(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
def test_make_rw_ro(self):
- self.vm.add_drive(old_img, 'media=disk', 'floppy')
+ self.vm.add_drive(old_img, 'media=disk', 'none')
+ self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
self.vm.launch()
result = self.vm.qmp('query-block')
@@ -531,7 +510,7 @@ class TestChangeReadOnly(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
result = self.vm.qmp('blockdev-change-medium',
- device='drive0',
+ id=self.device_name,
filename=new_img,
format=iotests.imgfmt,
read_only_mode='read-only')
@@ -543,7 +522,8 @@ class TestChangeReadOnly(ChangeBaseClass):
def test_make_ro_rw(self):
os.chmod(new_img, 0444)
- self.vm.add_drive(old_img, 'media=disk', 'floppy')
+ self.vm.add_drive(old_img, 'media=disk', 'none')
+ self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
self.vm.launch()
result = self.vm.qmp('query-block')
@@ -551,7 +531,7 @@ class TestChangeReadOnly(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
result = self.vm.qmp('blockdev-change-medium',
- device='drive0',
+ id=self.device_name,
filename=new_img,
format=iotests.imgfmt,
read_only_mode='read-write')
@@ -563,14 +543,15 @@ class TestChangeReadOnly(ChangeBaseClass):
def test_make_rw_ro_by_retain(self):
os.chmod(old_img, 0444)
- self.vm.add_drive(old_img, 'media=disk,read-only=on', 'floppy')
+ self.vm.add_drive(old_img, 'media=disk,read-only=on', 'none')
+ self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
self.vm.launch()
result = self.vm.qmp('query-block')
self.assert_qmp(result, 'return[0]/inserted/ro', True)
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
- result = self.vm.qmp('blockdev-change-medium', device='drive0',
+ result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
filename=new_img,
format=iotests.imgfmt,
read_only_mode='retain')
@@ -582,14 +563,15 @@ class TestChangeReadOnly(ChangeBaseClass):
def test_make_ro_rw_by_retain(self):
os.chmod(new_img, 0444)
- self.vm.add_drive(old_img, 'media=disk', 'floppy')
+ self.vm.add_drive(old_img, 'media=disk', 'none')
+ self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
self.vm.launch()
result = self.vm.qmp('query-block')
self.assert_qmp(result, 'return[0]/inserted/ro', False)
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
- result = self.vm.qmp('blockdev-change-medium', device='drive0',
+ result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
filename=new_img,
format=iotests.imgfmt,
read_only_mode='retain')
@@ -601,7 +583,8 @@ class TestChangeReadOnly(ChangeBaseClass):
def test_rw_ro_cycle(self):
os.chmod(new_img, 0444)
- self.vm.add_drive(old_img, 'media=disk', 'floppy')
+ self.vm.add_drive(old_img, 'media=disk', 'none')
+ self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
self.vm.launch()
result = self.vm.qmp('query-block')
@@ -620,13 +603,13 @@ class TestChangeReadOnly(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/inserted/ro', False)
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
- result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
+ result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
self.assert_qmp(result, 'return', {})
result = self.vm.qmp('query-block')
self.assert_qmp_absent(result, 'return[0]/inserted')
- result = self.vm.qmp('x-blockdev-insert-medium', device='drive0',
+ result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
node_name='new')
self.assert_qmp(result, 'return', {})
@@ -644,11 +627,14 @@ TestInitiallyEmpty = None
class TestBlockJobsAfterCycle(ChangeBaseClass):
+ device_name = 'qdev0'
+
def setUp(self):
- qemu_img('create', '-f', iotests.imgfmt, old_img, '1M')
+ qemu_img('create', '-f', iotests.imgfmt, old_img, '1440K')
self.vm = iotests.VM()
self.vm.add_drive_raw("id=drive0,driver=null-co,if=none")
+ self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
self.vm.launch()
result = self.vm.qmp('query-block')
@@ -656,7 +642,7 @@ class TestBlockJobsAfterCycle(ChangeBaseClass):
# For device-less BBs, calling blockdev-open-tray or blockdev-close-tray
# is not necessary
- result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
+ result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
self.assert_qmp(result, 'return', {})
result = self.vm.qmp('query-block')
@@ -669,7 +655,7 @@ class TestBlockJobsAfterCycle(ChangeBaseClass):
'driver': 'file'})
self.assert_qmp(result, 'return', {})
- result = self.vm.qmp('x-blockdev-insert-medium', device='drive0',
+ result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
node_name='node0')
self.assert_qmp(result, 'return', {})
diff --git a/tests/qemu-iotests/155 b/tests/qemu-iotests/155
index 0b86ea4e5c..fc9fa975be 100755
--- a/tests/qemu-iotests/155
+++ b/tests/qemu-iotests/155
@@ -51,36 +51,30 @@ class BaseClass(iotests.QMPTestCase):
target_real_backing = None
def setUp(self):
- qemu_img('create', '-f', iotests.imgfmt, back0_img, '1M')
+ qemu_img('create', '-f', iotests.imgfmt, back0_img, '1440K')
qemu_img('create', '-f', iotests.imgfmt, '-b', back0_img, back1_img)
qemu_img('create', '-f', iotests.imgfmt, '-b', back1_img, back2_img)
qemu_img('create', '-f', iotests.imgfmt, '-b', back2_img, source_img)
self.vm = iotests.VM()
- self.vm.add_drive(None, '', 'none')
- self.vm.launch()
-
# Add the BDS via blockdev-add so it stays around after the mirror block
# job has been completed
- result = self.vm.qmp('blockdev-add',
- node_name='source',
- driver=iotests.imgfmt,
- file={'driver': 'file',
- 'filename': source_img})
- self.assert_qmp(result, 'return', {})
-
- result = self.vm.qmp('x-blockdev-insert-medium',
- device='drive0', node_name='source')
- self.assert_qmp(result, 'return', {})
+ blockdev = {'node-name': 'source',
+ 'driver': iotests.imgfmt,
+ 'file': {'driver': 'file',
+ 'filename': source_img}}
+ self.vm.add_blockdev(self.qmp_to_opts(blockdev))
+ self.vm.add_device('floppy,id=qdev0,drive=source')
+ self.vm.launch()
self.assertIntactSourceBackingChain()
if self.existing:
if self.target_backing:
qemu_img('create', '-f', iotests.imgfmt,
- '-b', self.target_backing, target_img, '1M')
+ '-b', self.target_backing, target_img, '1440K')
else:
- qemu_img('create', '-f', iotests.imgfmt, target_img, '1M')
+ qemu_img('create', '-f', iotests.imgfmt, target_img, '1440K')
if self.cmd == 'blockdev-mirror':
options = { 'node-name': 'target',
@@ -104,11 +98,11 @@ class BaseClass(iotests.QMPTestCase):
except OSError:
pass
- def findBlockNode(self, node_name, id=None):
- if id:
+ def findBlockNode(self, node_name, qdev=None):
+ if qdev:
result = self.vm.qmp('query-block')
for device in result['return']:
- if device['device'] == id:
+ if device['qdev'] == qdev:
if node_name:
self.assert_qmp(device, 'inserted/node-name', node_name)
return device['inserted']
@@ -118,7 +112,7 @@ class BaseClass(iotests.QMPTestCase):
if node['node-name'] == node_name:
return node
- self.fail('Cannot find node %s/%s' % (id, node_name))
+ self.fail('Cannot find node %s/%s' % (qdev, node_name))
def assertIntactSourceBackingChain(self):
node = self.findBlockNode('source')
@@ -155,22 +149,23 @@ class BaseClass(iotests.QMPTestCase):
class MirrorBaseClass(BaseClass):
def runMirror(self, sync):
if self.cmd == 'blockdev-mirror':
- result = self.vm.qmp(self.cmd, device='drive0', sync=sync,
- target='target')
+ result = self.vm.qmp(self.cmd, job_id='mirror-job', device='source',
+ sync=sync, target='target')
else:
if self.existing:
mode = 'existing'
else:
mode = 'absolute-paths'
- result = self.vm.qmp(self.cmd, device='drive0', sync=sync,
- target=target_img, format=iotests.imgfmt,
- mode=mode, node_name='target')
+ result = self.vm.qmp(self.cmd, job_id='mirror-job', device='source',
+ sync=sync, target=target_img,
+ format=iotests.imgfmt, mode=mode,
+ node_name='target')
self.assert_qmp(result, 'return', {})
self.vm.event_wait('BLOCK_JOB_READY')
- result = self.vm.qmp('block-job-complete', device='drive0')
+ result = self.vm.qmp('block-job-complete', device='mirror-job')
self.assert_qmp(result, 'return', {})
self.vm.event_wait('BLOCK_JOB_COMPLETED')
@@ -178,21 +173,21 @@ class MirrorBaseClass(BaseClass):
def testFull(self):
self.runMirror('full')
- node = self.findBlockNode('target', 'drive0')
+ node = self.findBlockNode('target', 'qdev0')
self.assertCorrectBackingImage(node, None)
self.assertIntactSourceBackingChain()
def testTop(self):
self.runMirror('top')
- node = self.findBlockNode('target', 'drive0')
+ node = self.findBlockNode('target', 'qdev0')
self.assertCorrectBackingImage(node, back2_img)
self.assertIntactSourceBackingChain()
def testNone(self):
self.runMirror('none')
- node = self.findBlockNode('target', 'drive0')
+ node = self.findBlockNode('target', 'qdev0')
self.assertCorrectBackingImage(node, source_img)
self.assertIntactSourceBackingChain()
@@ -233,17 +228,18 @@ class TestCommit(BaseClass):
existing = False
def testCommit(self):
- result = self.vm.qmp('block-commit', device='drive0', base=back1_img)
+ result = self.vm.qmp('block-commit', job_id='commit-job',
+ device='source', base=back1_img)
self.assert_qmp(result, 'return', {})
self.vm.event_wait('BLOCK_JOB_READY')
- result = self.vm.qmp('block-job-complete', device='drive0')
+ result = self.vm.qmp('block-job-complete', device='commit-job')
self.assert_qmp(result, 'return', {})
self.vm.event_wait('BLOCK_JOB_COMPLETED')
- node = self.findBlockNode(None, 'drive0')
+ node = self.findBlockNode(None, 'qdev0')
self.assert_qmp(node, 'image' + '/backing-image' * 0 + '/filename',
back1_img)
self.assert_qmp(node, 'image' + '/backing-image' * 1 + '/filename',
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* Re: [Qemu-devel] [PULL 06/29] iotests: Make BD-{remove, insert}-medium use @id
2018-01-23 14:01 ` [Qemu-devel] [PULL 06/29] iotests: Make BD-{remove, insert}-medium use @id Kevin Wolf
@ 2018-02-12 11:16 ` Christian Borntraeger
2018-02-12 11:33 ` Christian Borntraeger
0 siblings, 1 reply; 34+ messages in thread
From: Christian Borntraeger @ 2018-02-12 11:16 UTC (permalink / raw)
To: Kevin Wolf, qemu-block; +Cc: qemu-devel, qemu-s390x
On 01/23/2018 03:01 PM, Kevin Wolf wrote:
> From: Max Reitz <mreitz@redhat.com>
>
> In some cases, these commands still use the deprecated @device
> parameter. Fix that so we can later drop that parameter from their
> interface.
>
> Signed-off-by: Max Reitz <mreitz@redhat.com>
> Message-id: 20171110224302.14424-2-mreitz@redhat.com
> Reviewed-by: Alberto Garcia <berto@igalia.com>
> Signed-off-by: Max Reitz <mreitz@redhat.com>
> ---
> tests/qemu-iotests/118 | 184 +++++++++++++++++++++++--------------------------
> tests/qemu-iotests/155 | 60 ++++++++--------
This broke 155 on s390:
-...................
+EEEEEEEEEEEEEEEEEEE
+======================================================================
+ERROR: testFull (__main__.TestBlockdevMirrorBacking)
+----------------------------------------------------------------------
+Traceback (most recent call last):
+ File "155", line 68, in setUp
+ self.vm.launch()
+ File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qemu.py", line 203, in launch
+ self._post_launch()
+ File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qtest.py", line 100, in _post_launch
+ super(QEMUQtestMachine, self)._post_launch()
+ File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qemu.py", line 181, in _post_launch
+ self._qmp.accept()
+ File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 157, in accept
+ return self.__negotiate_capabilities()
+ File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 75, in __negotiate_capabilities
+ resp = self.cmd('qmp_capabilities')
+ File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 191, in cmd
+ return self.cmd_obj(qmp_cmd)
+ File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 174, in cmd_obj
+ resp = self.__json_read()
+ File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 82, in __json_read
+ data = self.__sockfile.readline()
+ File "/usr/lib64/python2.7/socket.py", line 451, in readline
+ data = self._sock.recv(self._rbufsize)
+error: [Errno 104] Connection reset by peer
[...]
> 2 files changed, 113 insertions(+), 131 deletions(-)
>
> diff --git a/tests/qemu-iotests/118 b/tests/qemu-iotests/118
> index 8a9e838c90..ca6965d23c 100755
> --- a/tests/qemu-iotests/118
> +++ b/tests/qemu-iotests/118
> @@ -28,6 +28,14 @@ from iotests import qemu_img
> old_img = os.path.join(iotests.test_dir, 'test0.img')
> new_img = os.path.join(iotests.test_dir, 'test1.img')
>
> +def interface_to_device_name(interface):
> + if interface == 'ide':
> + return 'ide-cd'
> + elif interface == 'floppy':
> + return 'floppy'
> + else:
> + return None
> +
> class ChangeBaseClass(iotests.QMPTestCase):
> has_opened = False
> has_closed = False
> @@ -63,7 +71,7 @@ class ChangeBaseClass(iotests.QMPTestCase):
>
> class GeneralChangeTestsBaseClass(ChangeBaseClass):
>
> - device_name = None
> + device_name = 'qdev0'
>
> def test_change(self):
> result = self.vm.qmp('change', device='drive0', target=new_img,
> @@ -79,14 +87,9 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
>
> def test_blockdev_change_medium(self):
> - if self.device_name is not None:
> - result = self.vm.qmp('blockdev-change-medium',
> - id=self.device_name, filename=new_img,
> - format=iotests.imgfmt)
> - else:
> - result = self.vm.qmp('blockdev-change-medium',
> - device='drive0', filename=new_img,
> - format=iotests.imgfmt)
> + result = self.vm.qmp('blockdev-change-medium',
> + id=self.device_name, filename=new_img,
> + format=iotests.imgfmt)
>
> self.assert_qmp(result, 'return', {})
>
> @@ -99,10 +102,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
>
> def test_eject(self):
> - if self.device_name is not None:
> - result = self.vm.qmp('eject', id=self.device_name, force=True)
> - else:
> - result = self.vm.qmp('eject', device='drive0', force=True)
> + result = self.vm.qmp('eject', id=self.device_name, force=True)
> self.assert_qmp(result, 'return', {})
>
> self.wait_for_open()
> @@ -113,10 +113,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> self.assert_qmp_absent(result, 'return[0]/inserted')
>
> def test_tray_eject_change(self):
> - if self.device_name is not None:
> - result = self.vm.qmp('eject', id=self.device_name, force=True)
> - else:
> - result = self.vm.qmp('eject', device='drive0', force=True)
> + result = self.vm.qmp('eject', id=self.device_name, force=True)
> self.assert_qmp(result, 'return', {})
>
> self.wait_for_open()
> @@ -126,12 +123,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/tray_open', True)
> self.assert_qmp_absent(result, 'return[0]/inserted')
>
> - if self.device_name is not None:
> - result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
> - filename=new_img, format=iotests.imgfmt)
> - else:
> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
> - filename=new_img, format=iotests.imgfmt)
> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
> + filename=new_img, format=iotests.imgfmt)
> self.assert_qmp(result, 'return', {})
>
> self.wait_for_close()
> @@ -142,12 +135,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
>
> def test_tray_open_close(self):
> - if self.device_name is not None:
> - result = self.vm.qmp('blockdev-open-tray',
> - id=self.device_name, force=True)
> - else:
> - result = self.vm.qmp('blockdev-open-tray',
> - device='drive0', force=True)
> + result = self.vm.qmp('blockdev-open-tray',
> + id=self.device_name, force=True)
> self.assert_qmp(result, 'return', {})
>
> self.wait_for_open()
> @@ -160,10 +149,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> else:
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> - if self.device_name is not None:
> - result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
> - else:
> - result = self.vm.qmp('blockdev-close-tray', device='drive0')
> + result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
> self.assert_qmp(result, 'return', {})
>
> if self.has_real_tray or not self.was_empty:
> @@ -178,7 +164,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> def test_tray_eject_close(self):
> - result = self.vm.qmp('eject', device='drive0', force=True)
> + result = self.vm.qmp('eject', id=self.device_name, force=True)
> self.assert_qmp(result, 'return', {})
>
> self.wait_for_open()
> @@ -188,10 +174,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/tray_open', True)
> self.assert_qmp_absent(result, 'return[0]/inserted')
>
> - if self.device_name is not None:
> - result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
> - else:
> - result = self.vm.qmp('blockdev-close-tray', device='drive0')
> + result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
> self.assert_qmp(result, 'return', {})
>
> self.wait_for_close()
> @@ -202,7 +185,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> self.assert_qmp_absent(result, 'return[0]/inserted')
>
> def test_tray_open_change(self):
> - result = self.vm.qmp('blockdev-open-tray', device='drive0', force=True)
> + result = self.vm.qmp('blockdev-open-tray', id=self.device_name,
> + force=True)
> self.assert_qmp(result, 'return', {})
>
> self.wait_for_open()
> @@ -215,7 +199,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> else:
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
> filename=new_img,
> format=iotests.imgfmt)
> self.assert_qmp(result, 'return', {})
> @@ -235,12 +219,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> 'driver': 'file'})
> self.assert_qmp(result, 'return', {})
>
> - if self.device_name is not None:
> - result = self.vm.qmp('blockdev-open-tray',
> - id=self.device_name, force=True)
> - else:
> - result = self.vm.qmp('blockdev-open-tray',
> - device='drive0', force=True)
> + result = self.vm.qmp('blockdev-open-tray',
> + id=self.device_name, force=True)
> self.assert_qmp(result, 'return', {})
>
> self.wait_for_open()
> @@ -253,11 +233,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> else:
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> - if self.device_name is not None:
> - result = self.vm.qmp('x-blockdev-remove-medium',
> - id=self.device_name)
> - else:
> - result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
> + result = self.vm.qmp('x-blockdev-remove-medium',
> + id=self.device_name)
> self.assert_qmp(result, 'return', {})
>
> result = self.vm.qmp('query-block')
> @@ -265,12 +242,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/tray_open', True)
> self.assert_qmp_absent(result, 'return[0]/inserted')
>
> - if self.device_name is not None:
> - result = self.vm.qmp('x-blockdev-insert-medium',
> - id=self.device_name, node_name='new')
> - else:
> - result = self.vm.qmp('x-blockdev-insert-medium',
> - device='drive0', node_name='new')
> + result = self.vm.qmp('x-blockdev-insert-medium',
> + id=self.device_name, node_name='new')
> self.assert_qmp(result, 'return', {})
>
> result = self.vm.qmp('query-block')
> @@ -278,10 +251,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/tray_open', True)
> self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
>
> - if self.device_name is not None:
> - result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
> - else:
> - result = self.vm.qmp('blockdev-close-tray', device='drive0')
> + result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
> self.assert_qmp(result, 'return', {})
>
> self.wait_for_close()
> @@ -292,7 +262,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
>
> def test_close_on_closed(self):
> - result = self.vm.qmp('blockdev-close-tray', device='drive0')
> + result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
> # Should be a no-op
> self.assert_qmp(result, 'return', {})
> self.assertEquals(self.vm.get_qmp_events(wait=False), [])
> @@ -301,7 +271,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> if not self.has_real_tray:
> return
>
> - result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
> + result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
> self.assert_qmp(result, 'error/class', 'GenericError')
>
> def test_insert_on_closed(self):
> @@ -315,7 +285,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
> 'driver': 'file'})
> self.assert_qmp(result, 'return', {})
>
> - result = self.vm.qmp('x-blockdev-insert-medium', device='drive0',
> + result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
> node_name='new')
> self.assert_qmp(result, 'error/class', 'GenericError')
>
> @@ -326,12 +296,10 @@ class TestInitiallyFilled(GeneralChangeTestsBaseClass):
> qemu_img('create', '-f', iotests.imgfmt, old_img, '1440k')
> qemu_img('create', '-f', iotests.imgfmt, new_img, '1440k')
> self.vm = iotests.VM()
> - if interface == 'ide':
> - self.device_name = 'qdev0'
> - self.vm.add_drive(old_img, 'media=%s' % media, 'none')
> - self.vm.add_device('ide-cd,drive=drive0,id=%s' % self.device_name)
> - else:
> - self.vm.add_drive(old_img, 'media=%s' % media, interface)
> + self.vm.add_drive(old_img, 'media=%s' % media, 'none')
> + self.vm.add_device('%s,drive=drive0,id=%s' %
> + (interface_to_device_name(interface),
> + self.device_name))
> self.vm.launch()
>
> def tearDown(self):
> @@ -347,12 +315,12 @@ class TestInitiallyFilled(GeneralChangeTestsBaseClass):
> 'driver': 'file'})
> self.assert_qmp(result, 'return', {})
>
> - result = self.vm.qmp('blockdev-open-tray', device='drive0')
> + result = self.vm.qmp('blockdev-open-tray', id=self.device_name)
> self.assert_qmp(result, 'return', {})
>
> self.wait_for_open()
>
> - result = self.vm.qmp('x-blockdev-insert-medium', device='drive0',
> + result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
> node_name='new')
> self.assert_qmp(result, 'error/class', 'GenericError')
>
> @@ -361,7 +329,10 @@ class TestInitiallyEmpty(GeneralChangeTestsBaseClass):
>
> def setUp(self, media, interface):
> qemu_img('create', '-f', iotests.imgfmt, new_img, '1440k')
> - self.vm = iotests.VM().add_drive(None, 'media=%s' % media, interface)
> + self.vm = iotests.VM().add_drive(None, 'media=%s' % media, 'none')
> + self.vm.add_device('%s,drive=drive0,id=%s' %
> + (interface_to_device_name(interface),
> + self.device_name))
> self.vm.launch()
>
> def tearDown(self):
> @@ -369,12 +340,12 @@ class TestInitiallyEmpty(GeneralChangeTestsBaseClass):
> os.remove(new_img)
>
> def test_remove_on_empty(self):
> - result = self.vm.qmp('blockdev-open-tray', device='drive0')
> + result = self.vm.qmp('blockdev-open-tray', id=self.device_name)
> self.assert_qmp(result, 'return', {})
>
> self.wait_for_open()
>
> - result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
> + result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
> # Should be a no-op
> self.assert_qmp(result, 'return', {})
>
> @@ -410,6 +381,8 @@ class TestFloppyInitiallyEmpty(TestInitiallyEmpty):
> self.has_opened = True
>
> class TestChangeReadOnly(ChangeBaseClass):
> + device_name = 'qdev0'
> +
> def setUp(self):
> qemu_img('create', '-f', iotests.imgfmt, old_img, '1440k')
> qemu_img('create', '-f', iotests.imgfmt, new_img, '1440k')
> @@ -425,14 +398,15 @@ class TestChangeReadOnly(ChangeBaseClass):
> def test_ro_ro_retain(self):
> os.chmod(old_img, 0444)
> os.chmod(new_img, 0444)
> - self.vm.add_drive(old_img, 'media=disk,read-only=on', 'floppy')
> + self.vm.add_drive(old_img, 'media=disk,read-only=on', 'none')
> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
> self.vm.launch()
>
> result = self.vm.qmp('query-block')
> self.assert_qmp(result, 'return[0]/inserted/ro', True)
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
> filename=new_img,
> format=iotests.imgfmt,
> read_only_mode='retain')
> @@ -444,14 +418,15 @@ class TestChangeReadOnly(ChangeBaseClass):
>
> def test_ro_rw_retain(self):
> os.chmod(old_img, 0444)
> - self.vm.add_drive(old_img, 'media=disk,read-only=on', 'floppy')
> + self.vm.add_drive(old_img, 'media=disk,read-only=on', 'none')
> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
> self.vm.launch()
>
> result = self.vm.qmp('query-block')
> self.assert_qmp(result, 'return[0]/inserted/ro', True)
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
> filename=new_img,
> format=iotests.imgfmt,
> read_only_mode='retain')
> @@ -463,14 +438,15 @@ class TestChangeReadOnly(ChangeBaseClass):
>
> def test_rw_ro_retain(self):
> os.chmod(new_img, 0444)
> - self.vm.add_drive(old_img, 'media=disk', 'floppy')
> + self.vm.add_drive(old_img, 'media=disk', 'none')
> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
> self.vm.launch()
>
> result = self.vm.qmp('query-block')
> self.assert_qmp(result, 'return[0]/inserted/ro', False)
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
> filename=new_img,
> format=iotests.imgfmt,
> read_only_mode='retain')
> @@ -484,7 +460,8 @@ class TestChangeReadOnly(ChangeBaseClass):
>
> def test_ro_rw(self):
> os.chmod(old_img, 0444)
> - self.vm.add_drive(old_img, 'media=disk,read-only=on', 'floppy')
> + self.vm.add_drive(old_img, 'media=disk,read-only=on', 'none')
> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
> self.vm.launch()
>
> result = self.vm.qmp('query-block')
> @@ -492,7 +469,7 @@ class TestChangeReadOnly(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> result = self.vm.qmp('blockdev-change-medium',
> - device='drive0',
> + id=self.device_name,
> filename=new_img,
> format=iotests.imgfmt,
> read_only_mode='read-write')
> @@ -504,7 +481,8 @@ class TestChangeReadOnly(ChangeBaseClass):
>
> def test_rw_ro(self):
> os.chmod(new_img, 0444)
> - self.vm.add_drive(old_img, 'media=disk', 'floppy')
> + self.vm.add_drive(old_img, 'media=disk', 'none')
> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
> self.vm.launch()
>
> result = self.vm.qmp('query-block')
> @@ -512,7 +490,7 @@ class TestChangeReadOnly(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> result = self.vm.qmp('blockdev-change-medium',
> - device='drive0',
> + id=self.device_name,
> filename=new_img,
> format=iotests.imgfmt,
> read_only_mode='read-only')
> @@ -523,7 +501,8 @@ class TestChangeReadOnly(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
>
> def test_make_rw_ro(self):
> - self.vm.add_drive(old_img, 'media=disk', 'floppy')
> + self.vm.add_drive(old_img, 'media=disk', 'none')
> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
> self.vm.launch()
>
> result = self.vm.qmp('query-block')
> @@ -531,7 +510,7 @@ class TestChangeReadOnly(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> result = self.vm.qmp('blockdev-change-medium',
> - device='drive0',
> + id=self.device_name,
> filename=new_img,
> format=iotests.imgfmt,
> read_only_mode='read-only')
> @@ -543,7 +522,8 @@ class TestChangeReadOnly(ChangeBaseClass):
>
> def test_make_ro_rw(self):
> os.chmod(new_img, 0444)
> - self.vm.add_drive(old_img, 'media=disk', 'floppy')
> + self.vm.add_drive(old_img, 'media=disk', 'none')
> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
> self.vm.launch()
>
> result = self.vm.qmp('query-block')
> @@ -551,7 +531,7 @@ class TestChangeReadOnly(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> result = self.vm.qmp('blockdev-change-medium',
> - device='drive0',
> + id=self.device_name,
> filename=new_img,
> format=iotests.imgfmt,
> read_only_mode='read-write')
> @@ -563,14 +543,15 @@ class TestChangeReadOnly(ChangeBaseClass):
>
> def test_make_rw_ro_by_retain(self):
> os.chmod(old_img, 0444)
> - self.vm.add_drive(old_img, 'media=disk,read-only=on', 'floppy')
> + self.vm.add_drive(old_img, 'media=disk,read-only=on', 'none')
> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
> self.vm.launch()
>
> result = self.vm.qmp('query-block')
> self.assert_qmp(result, 'return[0]/inserted/ro', True)
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
> filename=new_img,
> format=iotests.imgfmt,
> read_only_mode='retain')
> @@ -582,14 +563,15 @@ class TestChangeReadOnly(ChangeBaseClass):
>
> def test_make_ro_rw_by_retain(self):
> os.chmod(new_img, 0444)
> - self.vm.add_drive(old_img, 'media=disk', 'floppy')
> + self.vm.add_drive(old_img, 'media=disk', 'none')
> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
> self.vm.launch()
>
> result = self.vm.qmp('query-block')
> self.assert_qmp(result, 'return[0]/inserted/ro', False)
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
> filename=new_img,
> format=iotests.imgfmt,
> read_only_mode='retain')
> @@ -601,7 +583,8 @@ class TestChangeReadOnly(ChangeBaseClass):
>
> def test_rw_ro_cycle(self):
> os.chmod(new_img, 0444)
> - self.vm.add_drive(old_img, 'media=disk', 'floppy')
> + self.vm.add_drive(old_img, 'media=disk', 'none')
> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
> self.vm.launch()
>
> result = self.vm.qmp('query-block')
> @@ -620,13 +603,13 @@ class TestChangeReadOnly(ChangeBaseClass):
> self.assert_qmp(result, 'return[0]/inserted/ro', False)
> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>
> - result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
> + result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
> self.assert_qmp(result, 'return', {})
>
> result = self.vm.qmp('query-block')
> self.assert_qmp_absent(result, 'return[0]/inserted')
>
> - result = self.vm.qmp('x-blockdev-insert-medium', device='drive0',
> + result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
> node_name='new')
> self.assert_qmp(result, 'return', {})
>
> @@ -644,11 +627,14 @@ TestInitiallyEmpty = None
>
>
> class TestBlockJobsAfterCycle(ChangeBaseClass):
> + device_name = 'qdev0'
> +
> def setUp(self):
> - qemu_img('create', '-f', iotests.imgfmt, old_img, '1M')
> + qemu_img('create', '-f', iotests.imgfmt, old_img, '1440K')
>
> self.vm = iotests.VM()
> self.vm.add_drive_raw("id=drive0,driver=null-co,if=none")
> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
> self.vm.launch()
>
> result = self.vm.qmp('query-block')
> @@ -656,7 +642,7 @@ class TestBlockJobsAfterCycle(ChangeBaseClass):
>
> # For device-less BBs, calling blockdev-open-tray or blockdev-close-tray
> # is not necessary
> - result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
> + result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
> self.assert_qmp(result, 'return', {})
>
> result = self.vm.qmp('query-block')
> @@ -669,7 +655,7 @@ class TestBlockJobsAfterCycle(ChangeBaseClass):
> 'driver': 'file'})
> self.assert_qmp(result, 'return', {})
>
> - result = self.vm.qmp('x-blockdev-insert-medium', device='drive0',
> + result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
> node_name='node0')
> self.assert_qmp(result, 'return', {})
>
> diff --git a/tests/qemu-iotests/155 b/tests/qemu-iotests/155
> index 0b86ea4e5c..fc9fa975be 100755
> --- a/tests/qemu-iotests/155
> +++ b/tests/qemu-iotests/155
> @@ -51,36 +51,30 @@ class BaseClass(iotests.QMPTestCase):
> target_real_backing = None
>
> def setUp(self):
> - qemu_img('create', '-f', iotests.imgfmt, back0_img, '1M')
> + qemu_img('create', '-f', iotests.imgfmt, back0_img, '1440K')
> qemu_img('create', '-f', iotests.imgfmt, '-b', back0_img, back1_img)
> qemu_img('create', '-f', iotests.imgfmt, '-b', back1_img, back2_img)
> qemu_img('create', '-f', iotests.imgfmt, '-b', back2_img, source_img)
>
> self.vm = iotests.VM()
> - self.vm.add_drive(None, '', 'none')
> - self.vm.launch()
> -
> # Add the BDS via blockdev-add so it stays around after the mirror block
> # job has been completed
> - result = self.vm.qmp('blockdev-add',
> - node_name='source',
> - driver=iotests.imgfmt,
> - file={'driver': 'file',
> - 'filename': source_img})
> - self.assert_qmp(result, 'return', {})
> -
> - result = self.vm.qmp('x-blockdev-insert-medium',
> - device='drive0', node_name='source')
> - self.assert_qmp(result, 'return', {})
> + blockdev = {'node-name': 'source',
> + 'driver': iotests.imgfmt,
> + 'file': {'driver': 'file',
> + 'filename': source_img}}
> + self.vm.add_blockdev(self.qmp_to_opts(blockdev))
> + self.vm.add_device('floppy,id=qdev0,drive=source')
> + self.vm.launch()
>
> self.assertIntactSourceBackingChain()
>
> if self.existing:
> if self.target_backing:
> qemu_img('create', '-f', iotests.imgfmt,
> - '-b', self.target_backing, target_img, '1M')
> + '-b', self.target_backing, target_img, '1440K')
> else:
> - qemu_img('create', '-f', iotests.imgfmt, target_img, '1M')
> + qemu_img('create', '-f', iotests.imgfmt, target_img, '1440K')
>
> if self.cmd == 'blockdev-mirror':
> options = { 'node-name': 'target',
> @@ -104,11 +98,11 @@ class BaseClass(iotests.QMPTestCase):
> except OSError:
> pass
>
> - def findBlockNode(self, node_name, id=None):
> - if id:
> + def findBlockNode(self, node_name, qdev=None):
> + if qdev:
> result = self.vm.qmp('query-block')
> for device in result['return']:
> - if device['device'] == id:
> + if device['qdev'] == qdev:
> if node_name:
> self.assert_qmp(device, 'inserted/node-name', node_name)
> return device['inserted']
> @@ -118,7 +112,7 @@ class BaseClass(iotests.QMPTestCase):
> if node['node-name'] == node_name:
> return node
>
> - self.fail('Cannot find node %s/%s' % (id, node_name))
> + self.fail('Cannot find node %s/%s' % (qdev, node_name))
>
> def assertIntactSourceBackingChain(self):
> node = self.findBlockNode('source')
> @@ -155,22 +149,23 @@ class BaseClass(iotests.QMPTestCase):
> class MirrorBaseClass(BaseClass):
> def runMirror(self, sync):
> if self.cmd == 'blockdev-mirror':
> - result = self.vm.qmp(self.cmd, device='drive0', sync=sync,
> - target='target')
> + result = self.vm.qmp(self.cmd, job_id='mirror-job', device='source',
> + sync=sync, target='target')
> else:
> if self.existing:
> mode = 'existing'
> else:
> mode = 'absolute-paths'
> - result = self.vm.qmp(self.cmd, device='drive0', sync=sync,
> - target=target_img, format=iotests.imgfmt,
> - mode=mode, node_name='target')
> + result = self.vm.qmp(self.cmd, job_id='mirror-job', device='source',
> + sync=sync, target=target_img,
> + format=iotests.imgfmt, mode=mode,
> + node_name='target')
>
> self.assert_qmp(result, 'return', {})
>
> self.vm.event_wait('BLOCK_JOB_READY')
>
> - result = self.vm.qmp('block-job-complete', device='drive0')
> + result = self.vm.qmp('block-job-complete', device='mirror-job')
> self.assert_qmp(result, 'return', {})
>
> self.vm.event_wait('BLOCK_JOB_COMPLETED')
> @@ -178,21 +173,21 @@ class MirrorBaseClass(BaseClass):
> def testFull(self):
> self.runMirror('full')
>
> - node = self.findBlockNode('target', 'drive0')
> + node = self.findBlockNode('target', 'qdev0')
> self.assertCorrectBackingImage(node, None)
> self.assertIntactSourceBackingChain()
>
> def testTop(self):
> self.runMirror('top')
>
> - node = self.findBlockNode('target', 'drive0')
> + node = self.findBlockNode('target', 'qdev0')
> self.assertCorrectBackingImage(node, back2_img)
> self.assertIntactSourceBackingChain()
>
> def testNone(self):
> self.runMirror('none')
>
> - node = self.findBlockNode('target', 'drive0')
> + node = self.findBlockNode('target', 'qdev0')
> self.assertCorrectBackingImage(node, source_img)
> self.assertIntactSourceBackingChain()
>
> @@ -233,17 +228,18 @@ class TestCommit(BaseClass):
> existing = False
>
> def testCommit(self):
> - result = self.vm.qmp('block-commit', device='drive0', base=back1_img)
> + result = self.vm.qmp('block-commit', job_id='commit-job',
> + device='source', base=back1_img)
> self.assert_qmp(result, 'return', {})
>
> self.vm.event_wait('BLOCK_JOB_READY')
>
> - result = self.vm.qmp('block-job-complete', device='drive0')
> + result = self.vm.qmp('block-job-complete', device='commit-job')
> self.assert_qmp(result, 'return', {})
>
> self.vm.event_wait('BLOCK_JOB_COMPLETED')
>
> - node = self.findBlockNode(None, 'drive0')
> + node = self.findBlockNode(None, 'qdev0')
> self.assert_qmp(node, 'image' + '/backing-image' * 0 + '/filename',
> back1_img)
> self.assert_qmp(node, 'image' + '/backing-image' * 1 + '/filename',
>
^ permalink raw reply [flat|nested] 34+ messages in thread* Re: [Qemu-devel] [PULL 06/29] iotests: Make BD-{remove, insert}-medium use @id
2018-02-12 11:16 ` Christian Borntraeger
@ 2018-02-12 11:33 ` Christian Borntraeger
2018-02-12 12:34 ` Max Reitz
0 siblings, 1 reply; 34+ messages in thread
From: Christian Borntraeger @ 2018-02-12 11:33 UTC (permalink / raw)
To: Kevin Wolf, qemu-block; +Cc: qemu-devel, Alberto Garcia, Max Reitz
Adding Max and Alberto,
I think the issue is that on s390 you cannot add a floppy
On 02/12/2018 12:16 PM, Christian Borntraeger wrote:
>
> On 01/23/2018 03:01 PM, Kevin Wolf wrote:
>> From: Max Reitz <mreitz@redhat.com>
>>
>> In some cases, these commands still use the deprecated @device
>> parameter. Fix that so we can later drop that parameter from their
>> interface.
>>
>> Signed-off-by: Max Reitz <mreitz@redhat.com>
>> Message-id: 20171110224302.14424-2-mreitz@redhat.com
>> Reviewed-by: Alberto Garcia <berto@igalia.com>
>> Signed-off-by: Max Reitz <mreitz@redhat.com>
>> ---
>> tests/qemu-iotests/118 | 184 +++++++++++++++++++++++--------------------------
>> tests/qemu-iotests/155 | 60 ++++++++--------
>
> This broke 155 on s390:
>
> -...................
> +EEEEEEEEEEEEEEEEEEE
> +======================================================================
> +ERROR: testFull (__main__.TestBlockdevMirrorBacking)
> +----------------------------------------------------------------------
> +Traceback (most recent call last):
> + File "155", line 68, in setUp
> + self.vm.launch()
> + File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qemu.py", line 203, in launch
> + self._post_launch()
> + File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qtest.py", line 100, in _post_launch
> + super(QEMUQtestMachine, self)._post_launch()
> + File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qemu.py", line 181, in _post_launch
> + self._qmp.accept()
> + File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 157, in accept
> + return self.__negotiate_capabilities()
> + File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 75, in __negotiate_capabilities
> + resp = self.cmd('qmp_capabilities')
> + File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 191, in cmd
> + return self.cmd_obj(qmp_cmd)
> + File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 174, in cmd_obj
> + resp = self.__json_read()
> + File "/home/cborntra/REPOS/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 82, in __json_read
> + data = self.__sockfile.readline()
> + File "/usr/lib64/python2.7/socket.py", line 451, in readline
> + data = self._sock.recv(self._rbufsize)
> +error: [Errno 104] Connection reset by peer
> [...]
>
>
>
>> 2 files changed, 113 insertions(+), 131 deletions(-)
>>
>> diff --git a/tests/qemu-iotests/118 b/tests/qemu-iotests/118
>> index 8a9e838c90..ca6965d23c 100755
>> --- a/tests/qemu-iotests/118
>> +++ b/tests/qemu-iotests/118
>> @@ -28,6 +28,14 @@ from iotests import qemu_img
>> old_img = os.path.join(iotests.test_dir, 'test0.img')
>> new_img = os.path.join(iotests.test_dir, 'test1.img')
>>
>> +def interface_to_device_name(interface):
>> + if interface == 'ide':
>> + return 'ide-cd'
>> + elif interface == 'floppy':
>> + return 'floppy'
>> + else:
>> + return None
>> +
>> class ChangeBaseClass(iotests.QMPTestCase):
>> has_opened = False
>> has_closed = False
>> @@ -63,7 +71,7 @@ class ChangeBaseClass(iotests.QMPTestCase):
>>
>> class GeneralChangeTestsBaseClass(ChangeBaseClass):
>>
>> - device_name = None
>> + device_name = 'qdev0'
>>
>> def test_change(self):
>> result = self.vm.qmp('change', device='drive0', target=new_img,
>> @@ -79,14 +87,9 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
>>
>> def test_blockdev_change_medium(self):
>> - if self.device_name is not None:
>> - result = self.vm.qmp('blockdev-change-medium',
>> - id=self.device_name, filename=new_img,
>> - format=iotests.imgfmt)
>> - else:
>> - result = self.vm.qmp('blockdev-change-medium',
>> - device='drive0', filename=new_img,
>> - format=iotests.imgfmt)
>> + result = self.vm.qmp('blockdev-change-medium',
>> + id=self.device_name, filename=new_img,
>> + format=iotests.imgfmt)
>>
>> self.assert_qmp(result, 'return', {})
>>
>> @@ -99,10 +102,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
>>
>> def test_eject(self):
>> - if self.device_name is not None:
>> - result = self.vm.qmp('eject', id=self.device_name, force=True)
>> - else:
>> - result = self.vm.qmp('eject', device='drive0', force=True)
>> + result = self.vm.qmp('eject', id=self.device_name, force=True)
>> self.assert_qmp(result, 'return', {})
>>
>> self.wait_for_open()
>> @@ -113,10 +113,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> self.assert_qmp_absent(result, 'return[0]/inserted')
>>
>> def test_tray_eject_change(self):
>> - if self.device_name is not None:
>> - result = self.vm.qmp('eject', id=self.device_name, force=True)
>> - else:
>> - result = self.vm.qmp('eject', device='drive0', force=True)
>> + result = self.vm.qmp('eject', id=self.device_name, force=True)
>> self.assert_qmp(result, 'return', {})
>>
>> self.wait_for_open()
>> @@ -126,12 +123,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/tray_open', True)
>> self.assert_qmp_absent(result, 'return[0]/inserted')
>>
>> - if self.device_name is not None:
>> - result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
>> - filename=new_img, format=iotests.imgfmt)
>> - else:
>> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
>> - filename=new_img, format=iotests.imgfmt)
>> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
>> + filename=new_img, format=iotests.imgfmt)
>> self.assert_qmp(result, 'return', {})
>>
>> self.wait_for_close()
>> @@ -142,12 +135,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
>>
>> def test_tray_open_close(self):
>> - if self.device_name is not None:
>> - result = self.vm.qmp('blockdev-open-tray',
>> - id=self.device_name, force=True)
>> - else:
>> - result = self.vm.qmp('blockdev-open-tray',
>> - device='drive0', force=True)
>> + result = self.vm.qmp('blockdev-open-tray',
>> + id=self.device_name, force=True)
>> self.assert_qmp(result, 'return', {})
>>
>> self.wait_for_open()
>> @@ -160,10 +149,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> else:
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> - if self.device_name is not None:
>> - result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
>> - else:
>> - result = self.vm.qmp('blockdev-close-tray', device='drive0')
>> + result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
>> self.assert_qmp(result, 'return', {})
>>
>> if self.has_real_tray or not self.was_empty:
>> @@ -178,7 +164,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> def test_tray_eject_close(self):
>> - result = self.vm.qmp('eject', device='drive0', force=True)
>> + result = self.vm.qmp('eject', id=self.device_name, force=True)
>> self.assert_qmp(result, 'return', {})
>>
>> self.wait_for_open()
>> @@ -188,10 +174,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/tray_open', True)
>> self.assert_qmp_absent(result, 'return[0]/inserted')
>>
>> - if self.device_name is not None:
>> - result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
>> - else:
>> - result = self.vm.qmp('blockdev-close-tray', device='drive0')
>> + result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
>> self.assert_qmp(result, 'return', {})
>>
>> self.wait_for_close()
>> @@ -202,7 +185,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> self.assert_qmp_absent(result, 'return[0]/inserted')
>>
>> def test_tray_open_change(self):
>> - result = self.vm.qmp('blockdev-open-tray', device='drive0', force=True)
>> + result = self.vm.qmp('blockdev-open-tray', id=self.device_name,
>> + force=True)
>> self.assert_qmp(result, 'return', {})
>>
>> self.wait_for_open()
>> @@ -215,7 +199,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> else:
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
>> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
>> filename=new_img,
>> format=iotests.imgfmt)
>> self.assert_qmp(result, 'return', {})
>> @@ -235,12 +219,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> 'driver': 'file'})
>> self.assert_qmp(result, 'return', {})
>>
>> - if self.device_name is not None:
>> - result = self.vm.qmp('blockdev-open-tray',
>> - id=self.device_name, force=True)
>> - else:
>> - result = self.vm.qmp('blockdev-open-tray',
>> - device='drive0', force=True)
>> + result = self.vm.qmp('blockdev-open-tray',
>> + id=self.device_name, force=True)
>> self.assert_qmp(result, 'return', {})
>>
>> self.wait_for_open()
>> @@ -253,11 +233,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> else:
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> - if self.device_name is not None:
>> - result = self.vm.qmp('x-blockdev-remove-medium',
>> - id=self.device_name)
>> - else:
>> - result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
>> + result = self.vm.qmp('x-blockdev-remove-medium',
>> + id=self.device_name)
>> self.assert_qmp(result, 'return', {})
>>
>> result = self.vm.qmp('query-block')
>> @@ -265,12 +242,8 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/tray_open', True)
>> self.assert_qmp_absent(result, 'return[0]/inserted')
>>
>> - if self.device_name is not None:
>> - result = self.vm.qmp('x-blockdev-insert-medium',
>> - id=self.device_name, node_name='new')
>> - else:
>> - result = self.vm.qmp('x-blockdev-insert-medium',
>> - device='drive0', node_name='new')
>> + result = self.vm.qmp('x-blockdev-insert-medium',
>> + id=self.device_name, node_name='new')
>> self.assert_qmp(result, 'return', {})
>>
>> result = self.vm.qmp('query-block')
>> @@ -278,10 +251,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/tray_open', True)
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
>>
>> - if self.device_name is not None:
>> - result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
>> - else:
>> - result = self.vm.qmp('blockdev-close-tray', device='drive0')
>> + result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
>> self.assert_qmp(result, 'return', {})
>>
>> self.wait_for_close()
>> @@ -292,7 +262,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
>>
>> def test_close_on_closed(self):
>> - result = self.vm.qmp('blockdev-close-tray', device='drive0')
>> + result = self.vm.qmp('blockdev-close-tray', id=self.device_name)
>> # Should be a no-op
>> self.assert_qmp(result, 'return', {})
>> self.assertEquals(self.vm.get_qmp_events(wait=False), [])
>> @@ -301,7 +271,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> if not self.has_real_tray:
>> return
>>
>> - result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
>> + result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
>> self.assert_qmp(result, 'error/class', 'GenericError')
>>
>> def test_insert_on_closed(self):
>> @@ -315,7 +285,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
>> 'driver': 'file'})
>> self.assert_qmp(result, 'return', {})
>>
>> - result = self.vm.qmp('x-blockdev-insert-medium', device='drive0',
>> + result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
>> node_name='new')
>> self.assert_qmp(result, 'error/class', 'GenericError')
>>
>> @@ -326,12 +296,10 @@ class TestInitiallyFilled(GeneralChangeTestsBaseClass):
>> qemu_img('create', '-f', iotests.imgfmt, old_img, '1440k')
>> qemu_img('create', '-f', iotests.imgfmt, new_img, '1440k')
>> self.vm = iotests.VM()
>> - if interface == 'ide':
>> - self.device_name = 'qdev0'
>> - self.vm.add_drive(old_img, 'media=%s' % media, 'none')
>> - self.vm.add_device('ide-cd,drive=drive0,id=%s' % self.device_name)
>> - else:
>> - self.vm.add_drive(old_img, 'media=%s' % media, interface)
>> + self.vm.add_drive(old_img, 'media=%s' % media, 'none')
>> + self.vm.add_device('%s,drive=drive0,id=%s' %
>> + (interface_to_device_name(interface),
>> + self.device_name))
>> self.vm.launch()
>>
>> def tearDown(self):
>> @@ -347,12 +315,12 @@ class TestInitiallyFilled(GeneralChangeTestsBaseClass):
>> 'driver': 'file'})
>> self.assert_qmp(result, 'return', {})
>>
>> - result = self.vm.qmp('blockdev-open-tray', device='drive0')
>> + result = self.vm.qmp('blockdev-open-tray', id=self.device_name)
>> self.assert_qmp(result, 'return', {})
>>
>> self.wait_for_open()
>>
>> - result = self.vm.qmp('x-blockdev-insert-medium', device='drive0',
>> + result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
>> node_name='new')
>> self.assert_qmp(result, 'error/class', 'GenericError')
>>
>> @@ -361,7 +329,10 @@ class TestInitiallyEmpty(GeneralChangeTestsBaseClass):
>>
>> def setUp(self, media, interface):
>> qemu_img('create', '-f', iotests.imgfmt, new_img, '1440k')
>> - self.vm = iotests.VM().add_drive(None, 'media=%s' % media, interface)
>> + self.vm = iotests.VM().add_drive(None, 'media=%s' % media, 'none')
>> + self.vm.add_device('%s,drive=drive0,id=%s' %
>> + (interface_to_device_name(interface),
>> + self.device_name))
>> self.vm.launch()
>>
>> def tearDown(self):
>> @@ -369,12 +340,12 @@ class TestInitiallyEmpty(GeneralChangeTestsBaseClass):
>> os.remove(new_img)
>>
>> def test_remove_on_empty(self):
>> - result = self.vm.qmp('blockdev-open-tray', device='drive0')
>> + result = self.vm.qmp('blockdev-open-tray', id=self.device_name)
>> self.assert_qmp(result, 'return', {})
>>
>> self.wait_for_open()
>>
>> - result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
>> + result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
>> # Should be a no-op
>> self.assert_qmp(result, 'return', {})
>>
>> @@ -410,6 +381,8 @@ class TestFloppyInitiallyEmpty(TestInitiallyEmpty):
>> self.has_opened = True
>>
>> class TestChangeReadOnly(ChangeBaseClass):
>> + device_name = 'qdev0'
>> +
>> def setUp(self):
>> qemu_img('create', '-f', iotests.imgfmt, old_img, '1440k')
>> qemu_img('create', '-f', iotests.imgfmt, new_img, '1440k')
>> @@ -425,14 +398,15 @@ class TestChangeReadOnly(ChangeBaseClass):
>> def test_ro_ro_retain(self):
>> os.chmod(old_img, 0444)
>> os.chmod(new_img, 0444)
>> - self.vm.add_drive(old_img, 'media=disk,read-only=on', 'floppy')
>> + self.vm.add_drive(old_img, 'media=disk,read-only=on', 'none')
>> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
>> self.vm.launch()
>>
>> result = self.vm.qmp('query-block')
>> self.assert_qmp(result, 'return[0]/inserted/ro', True)
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
>> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
>> filename=new_img,
>> format=iotests.imgfmt,
>> read_only_mode='retain')
>> @@ -444,14 +418,15 @@ class TestChangeReadOnly(ChangeBaseClass):
>>
>> def test_ro_rw_retain(self):
>> os.chmod(old_img, 0444)
>> - self.vm.add_drive(old_img, 'media=disk,read-only=on', 'floppy')
>> + self.vm.add_drive(old_img, 'media=disk,read-only=on', 'none')
>> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
>> self.vm.launch()
>>
>> result = self.vm.qmp('query-block')
>> self.assert_qmp(result, 'return[0]/inserted/ro', True)
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
>> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
>> filename=new_img,
>> format=iotests.imgfmt,
>> read_only_mode='retain')
>> @@ -463,14 +438,15 @@ class TestChangeReadOnly(ChangeBaseClass):
>>
>> def test_rw_ro_retain(self):
>> os.chmod(new_img, 0444)
>> - self.vm.add_drive(old_img, 'media=disk', 'floppy')
>> + self.vm.add_drive(old_img, 'media=disk', 'none')
>> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
>> self.vm.launch()
>>
>> result = self.vm.qmp('query-block')
>> self.assert_qmp(result, 'return[0]/inserted/ro', False)
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
>> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
>> filename=new_img,
>> format=iotests.imgfmt,
>> read_only_mode='retain')
>> @@ -484,7 +460,8 @@ class TestChangeReadOnly(ChangeBaseClass):
>>
>> def test_ro_rw(self):
>> os.chmod(old_img, 0444)
>> - self.vm.add_drive(old_img, 'media=disk,read-only=on', 'floppy')
>> + self.vm.add_drive(old_img, 'media=disk,read-only=on', 'none')
>> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
>> self.vm.launch()
>>
>> result = self.vm.qmp('query-block')
>> @@ -492,7 +469,7 @@ class TestChangeReadOnly(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> result = self.vm.qmp('blockdev-change-medium',
>> - device='drive0',
>> + id=self.device_name,
>> filename=new_img,
>> format=iotests.imgfmt,
>> read_only_mode='read-write')
>> @@ -504,7 +481,8 @@ class TestChangeReadOnly(ChangeBaseClass):
>>
>> def test_rw_ro(self):
>> os.chmod(new_img, 0444)
>> - self.vm.add_drive(old_img, 'media=disk', 'floppy')
>> + self.vm.add_drive(old_img, 'media=disk', 'none')
>> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
>> self.vm.launch()
>>
>> result = self.vm.qmp('query-block')
>> @@ -512,7 +490,7 @@ class TestChangeReadOnly(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> result = self.vm.qmp('blockdev-change-medium',
>> - device='drive0',
>> + id=self.device_name,
>> filename=new_img,
>> format=iotests.imgfmt,
>> read_only_mode='read-only')
>> @@ -523,7 +501,8 @@ class TestChangeReadOnly(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', new_img)
>>
>> def test_make_rw_ro(self):
>> - self.vm.add_drive(old_img, 'media=disk', 'floppy')
>> + self.vm.add_drive(old_img, 'media=disk', 'none')
>> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
>> self.vm.launch()
>>
>> result = self.vm.qmp('query-block')
>> @@ -531,7 +510,7 @@ class TestChangeReadOnly(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> result = self.vm.qmp('blockdev-change-medium',
>> - device='drive0',
>> + id=self.device_name,
>> filename=new_img,
>> format=iotests.imgfmt,
>> read_only_mode='read-only')
>> @@ -543,7 +522,8 @@ class TestChangeReadOnly(ChangeBaseClass):
>>
>> def test_make_ro_rw(self):
>> os.chmod(new_img, 0444)
>> - self.vm.add_drive(old_img, 'media=disk', 'floppy')
>> + self.vm.add_drive(old_img, 'media=disk', 'none')
>> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
>> self.vm.launch()
>>
>> result = self.vm.qmp('query-block')
>> @@ -551,7 +531,7 @@ class TestChangeReadOnly(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> result = self.vm.qmp('blockdev-change-medium',
>> - device='drive0',
>> + id=self.device_name,
>> filename=new_img,
>> format=iotests.imgfmt,
>> read_only_mode='read-write')
>> @@ -563,14 +543,15 @@ class TestChangeReadOnly(ChangeBaseClass):
>>
>> def test_make_rw_ro_by_retain(self):
>> os.chmod(old_img, 0444)
>> - self.vm.add_drive(old_img, 'media=disk,read-only=on', 'floppy')
>> + self.vm.add_drive(old_img, 'media=disk,read-only=on', 'none')
>> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
>> self.vm.launch()
>>
>> result = self.vm.qmp('query-block')
>> self.assert_qmp(result, 'return[0]/inserted/ro', True)
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
>> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
>> filename=new_img,
>> format=iotests.imgfmt,
>> read_only_mode='retain')
>> @@ -582,14 +563,15 @@ class TestChangeReadOnly(ChangeBaseClass):
>>
>> def test_make_ro_rw_by_retain(self):
>> os.chmod(new_img, 0444)
>> - self.vm.add_drive(old_img, 'media=disk', 'floppy')
>> + self.vm.add_drive(old_img, 'media=disk', 'none')
>> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
>> self.vm.launch()
>>
>> result = self.vm.qmp('query-block')
>> self.assert_qmp(result, 'return[0]/inserted/ro', False)
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> - result = self.vm.qmp('blockdev-change-medium', device='drive0',
>> + result = self.vm.qmp('blockdev-change-medium', id=self.device_name,
>> filename=new_img,
>> format=iotests.imgfmt,
>> read_only_mode='retain')
>> @@ -601,7 +583,8 @@ class TestChangeReadOnly(ChangeBaseClass):
>>
>> def test_rw_ro_cycle(self):
>> os.chmod(new_img, 0444)
>> - self.vm.add_drive(old_img, 'media=disk', 'floppy')
>> + self.vm.add_drive(old_img, 'media=disk', 'none')
>> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
>> self.vm.launch()
>>
>> result = self.vm.qmp('query-block')
>> @@ -620,13 +603,13 @@ class TestChangeReadOnly(ChangeBaseClass):
>> self.assert_qmp(result, 'return[0]/inserted/ro', False)
>> self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
>>
>> - result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
>> + result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
>> self.assert_qmp(result, 'return', {})
>>
>> result = self.vm.qmp('query-block')
>> self.assert_qmp_absent(result, 'return[0]/inserted')
>>
>> - result = self.vm.qmp('x-blockdev-insert-medium', device='drive0',
>> + result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
>> node_name='new')
>> self.assert_qmp(result, 'return', {})
>>
>> @@ -644,11 +627,14 @@ TestInitiallyEmpty = None
>>
>>
>> class TestBlockJobsAfterCycle(ChangeBaseClass):
>> + device_name = 'qdev0'
>> +
>> def setUp(self):
>> - qemu_img('create', '-f', iotests.imgfmt, old_img, '1M')
>> + qemu_img('create', '-f', iotests.imgfmt, old_img, '1440K')
>>
>> self.vm = iotests.VM()
>> self.vm.add_drive_raw("id=drive0,driver=null-co,if=none")
>> + self.vm.add_device('floppy,drive=drive0,id=%s' % self.device_name)
>> self.vm.launch()
>>
>> result = self.vm.qmp('query-block')
>> @@ -656,7 +642,7 @@ class TestBlockJobsAfterCycle(ChangeBaseClass):
>>
>> # For device-less BBs, calling blockdev-open-tray or blockdev-close-tray
>> # is not necessary
>> - result = self.vm.qmp('x-blockdev-remove-medium', device='drive0')
>> + result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
>> self.assert_qmp(result, 'return', {})
>>
>> result = self.vm.qmp('query-block')
>> @@ -669,7 +655,7 @@ class TestBlockJobsAfterCycle(ChangeBaseClass):
>> 'driver': 'file'})
>> self.assert_qmp(result, 'return', {})
>>
>> - result = self.vm.qmp('x-blockdev-insert-medium', device='drive0',
>> + result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
>> node_name='node0')
>> self.assert_qmp(result, 'return', {})
>>
>> diff --git a/tests/qemu-iotests/155 b/tests/qemu-iotests/155
>> index 0b86ea4e5c..fc9fa975be 100755
>> --- a/tests/qemu-iotests/155
>> +++ b/tests/qemu-iotests/155
>> @@ -51,36 +51,30 @@ class BaseClass(iotests.QMPTestCase):
>> target_real_backing = None
>>
>> def setUp(self):
>> - qemu_img('create', '-f', iotests.imgfmt, back0_img, '1M')
>> + qemu_img('create', '-f', iotests.imgfmt, back0_img, '1440K')
>> qemu_img('create', '-f', iotests.imgfmt, '-b', back0_img, back1_img)
>> qemu_img('create', '-f', iotests.imgfmt, '-b', back1_img, back2_img)
>> qemu_img('create', '-f', iotests.imgfmt, '-b', back2_img, source_img)
>>
>> self.vm = iotests.VM()
>> - self.vm.add_drive(None, '', 'none')
>> - self.vm.launch()
>> -
>> # Add the BDS via blockdev-add so it stays around after the mirror block
>> # job has been completed
>> - result = self.vm.qmp('blockdev-add',
>> - node_name='source',
>> - driver=iotests.imgfmt,
>> - file={'driver': 'file',
>> - 'filename': source_img})
>> - self.assert_qmp(result, 'return', {})
>> -
>> - result = self.vm.qmp('x-blockdev-insert-medium',
>> - device='drive0', node_name='source')
>> - self.assert_qmp(result, 'return', {})
>> + blockdev = {'node-name': 'source',
>> + 'driver': iotests.imgfmt,
>> + 'file': {'driver': 'file',
>> + 'filename': source_img}}
>> + self.vm.add_blockdev(self.qmp_to_opts(blockdev))
>> + self.vm.add_device('floppy,id=qdev0,drive=source')
>> + self.vm.launch()
>>
>> self.assertIntactSourceBackingChain()
>>
>> if self.existing:
>> if self.target_backing:
>> qemu_img('create', '-f', iotests.imgfmt,
>> - '-b', self.target_backing, target_img, '1M')
>> + '-b', self.target_backing, target_img, '1440K')
>> else:
>> - qemu_img('create', '-f', iotests.imgfmt, target_img, '1M')
>> + qemu_img('create', '-f', iotests.imgfmt, target_img, '1440K')
>>
>> if self.cmd == 'blockdev-mirror':
>> options = { 'node-name': 'target',
>> @@ -104,11 +98,11 @@ class BaseClass(iotests.QMPTestCase):
>> except OSError:
>> pass
>>
>> - def findBlockNode(self, node_name, id=None):
>> - if id:
>> + def findBlockNode(self, node_name, qdev=None):
>> + if qdev:
>> result = self.vm.qmp('query-block')
>> for device in result['return']:
>> - if device['device'] == id:
>> + if device['qdev'] == qdev:
>> if node_name:
>> self.assert_qmp(device, 'inserted/node-name', node_name)
>> return device['inserted']
>> @@ -118,7 +112,7 @@ class BaseClass(iotests.QMPTestCase):
>> if node['node-name'] == node_name:
>> return node
>>
>> - self.fail('Cannot find node %s/%s' % (id, node_name))
>> + self.fail('Cannot find node %s/%s' % (qdev, node_name))
>>
>> def assertIntactSourceBackingChain(self):
>> node = self.findBlockNode('source')
>> @@ -155,22 +149,23 @@ class BaseClass(iotests.QMPTestCase):
>> class MirrorBaseClass(BaseClass):
>> def runMirror(self, sync):
>> if self.cmd == 'blockdev-mirror':
>> - result = self.vm.qmp(self.cmd, device='drive0', sync=sync,
>> - target='target')
>> + result = self.vm.qmp(self.cmd, job_id='mirror-job', device='source',
>> + sync=sync, target='target')
>> else:
>> if self.existing:
>> mode = 'existing'
>> else:
>> mode = 'absolute-paths'
>> - result = self.vm.qmp(self.cmd, device='drive0', sync=sync,
>> - target=target_img, format=iotests.imgfmt,
>> - mode=mode, node_name='target')
>> + result = self.vm.qmp(self.cmd, job_id='mirror-job', device='source',
>> + sync=sync, target=target_img,
>> + format=iotests.imgfmt, mode=mode,
>> + node_name='target')
>>
>> self.assert_qmp(result, 'return', {})
>>
>> self.vm.event_wait('BLOCK_JOB_READY')
>>
>> - result = self.vm.qmp('block-job-complete', device='drive0')
>> + result = self.vm.qmp('block-job-complete', device='mirror-job')
>> self.assert_qmp(result, 'return', {})
>>
>> self.vm.event_wait('BLOCK_JOB_COMPLETED')
>> @@ -178,21 +173,21 @@ class MirrorBaseClass(BaseClass):
>> def testFull(self):
>> self.runMirror('full')
>>
>> - node = self.findBlockNode('target', 'drive0')
>> + node = self.findBlockNode('target', 'qdev0')
>> self.assertCorrectBackingImage(node, None)
>> self.assertIntactSourceBackingChain()
>>
>> def testTop(self):
>> self.runMirror('top')
>>
>> - node = self.findBlockNode('target', 'drive0')
>> + node = self.findBlockNode('target', 'qdev0')
>> self.assertCorrectBackingImage(node, back2_img)
>> self.assertIntactSourceBackingChain()
>>
>> def testNone(self):
>> self.runMirror('none')
>>
>> - node = self.findBlockNode('target', 'drive0')
>> + node = self.findBlockNode('target', 'qdev0')
>> self.assertCorrectBackingImage(node, source_img)
>> self.assertIntactSourceBackingChain()
>>
>> @@ -233,17 +228,18 @@ class TestCommit(BaseClass):
>> existing = False
>>
>> def testCommit(self):
>> - result = self.vm.qmp('block-commit', device='drive0', base=back1_img)
>> + result = self.vm.qmp('block-commit', job_id='commit-job',
>> + device='source', base=back1_img)
>> self.assert_qmp(result, 'return', {})
>>
>> self.vm.event_wait('BLOCK_JOB_READY')
>>
>> - result = self.vm.qmp('block-job-complete', device='drive0')
>> + result = self.vm.qmp('block-job-complete', device='commit-job')
>> self.assert_qmp(result, 'return', {})
>>
>> self.vm.event_wait('BLOCK_JOB_COMPLETED')
>>
>> - node = self.findBlockNode(None, 'drive0')
>> + node = self.findBlockNode(None, 'qdev0')
>> self.assert_qmp(node, 'image' + '/backing-image' * 0 + '/filename',
>> back1_img)
>> self.assert_qmp(node, 'image' + '/backing-image' * 1 + '/filename',
>>
^ permalink raw reply [flat|nested] 34+ messages in thread
* [Qemu-devel] [PULL 07/29] tests/ahci: Switch tray and medium commands to @id
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (5 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 06/29] iotests: Make BD-{remove, insert}-medium use @id Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 08/29] blockdev: Drop BD-{remove, insert}-medium's @device Kevin Wolf
` (22 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
Currently, the tray and medium commands in the AHCI test use the
deprecated @device parameter. This patch switches all invocations over
to use @id.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-3-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/ahci-test.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index cb84edc8fb..3635ea6d41 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -1578,9 +1578,9 @@ static void test_atapi_tray(void)
QDict *rsp;
fd = prepare_iso(iso_size, &tx, &iso);
- ahci = ahci_boot_and_enable("-drive if=none,id=drive0,file=%s,format=raw "
+ ahci = ahci_boot_and_enable("-blockdev node-name=drive0,driver=file,filename=%s "
"-M q35 "
- "-device ide-cd,drive=drive0 ", iso);
+ "-device ide-cd,id=cd0,drive=drive0 ", iso);
port = ahci_port_select(ahci);
ahci_atapi_eject(ahci, port);
@@ -1591,13 +1591,13 @@ static void test_atapi_tray(void)
/* Remove media */
qmp_async("{'execute': 'blockdev-open-tray', "
- "'arguments': {'device': 'drive0'}}");
+ "'arguments': {'id': 'cd0'}}");
atapi_wait_tray(true);
rsp = qmp_receive();
QDECREF(rsp);
qmp_discard_response("{'execute': 'x-blockdev-remove-medium', "
- "'arguments': {'device': 'drive0'}}");
+ "'arguments': {'id': 'cd0'}}");
/* Test the tray without a medium */
ahci_atapi_load(ahci, port);
@@ -1613,12 +1613,12 @@ static void test_atapi_tray(void)
"'file': { 'driver': 'file', "
"'filename': %s }}}", iso);
qmp_discard_response("{'execute': 'x-blockdev-insert-medium',"
- "'arguments': { 'device': 'drive0', "
+ "'arguments': { 'id': 'cd0', "
"'node-name': 'node0' }}");
/* Again, the event shows up first */
qmp_async("{'execute': 'blockdev-close-tray', "
- "'arguments': {'device': 'drive0'}}");
+ "'arguments': {'id': 'cd0'}}");
atapi_wait_tray(false);
rsp = qmp_receive();
QDECREF(rsp);
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 08/29] blockdev: Drop BD-{remove, insert}-medium's @device
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (6 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 07/29] tests/ahci: Switch tray and medium commands to @id Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 09/29] blockdev: Mark BD-{remove, insert}-medium stable Kevin Wolf
` (21 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
This is an incompatible change, which is fine as the commands are
experimental.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-4-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
qapi/block-core.json | 10 ++--------
blockdev.c | 30 +++++++++++++++++++++++-------
2 files changed, 25 insertions(+), 15 deletions(-)
diff --git a/qapi/block-core.json b/qapi/block-core.json
index e94a6881b2..d1df47de26 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -3411,8 +3411,6 @@
#
# If the tray is open and there is no medium inserted, this will be a no-op.
#
-# @device: Block device name (deprecated, use @id instead)
-#
# @id: The name or QOM path of the guest device (since: 2.8)
#
# Note: This command is still a work in progress and is considered experimental.
@@ -3447,8 +3445,7 @@
#
##
{ 'command': 'x-blockdev-remove-medium',
- 'data': { '*device': 'str',
- '*id': 'str' } }
+ 'data': { 'id': 'str' } }
##
# @x-blockdev-insert-medium:
@@ -3457,8 +3454,6 @@
# device's tray must currently be open (unless there is no attached guest
# device) and there must be no medium inserted already.
#
-# @device: Block device name (deprecated, use @id instead)
-#
# @id: The name or QOM path of the guest device (since: 2.8)
#
# @node-name: name of a node in the block driver state graph
@@ -3486,8 +3481,7 @@
#
##
{ 'command': 'x-blockdev-insert-medium',
- 'data': { '*device': 'str',
- '*id': 'str',
+ 'data': { 'id': 'str',
'node-name': 'str'} }
diff --git a/blockdev.c b/blockdev.c
index 29d569a24e..2f9aef4167 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -60,6 +60,11 @@ static QTAILQ_HEAD(, BlockDriverState) monitor_bdrv_states =
static int do_open_tray(const char *blk_name, const char *qdev_id,
bool force, Error **errp);
+static void blockdev_remove_medium(bool has_device, const char *device,
+ bool has_id, const char *id, Error **errp);
+static void blockdev_insert_medium(bool has_device, const char *device,
+ bool has_id, const char *id,
+ const char *node_name, Error **errp);
static const char *const if_name[IF_COUNT] = {
[IF_NONE] = "none",
@@ -2323,7 +2328,7 @@ void qmp_eject(bool has_device, const char *device,
}
error_free(local_err);
- qmp_x_blockdev_remove_medium(has_device, device, has_id, id, errp);
+ blockdev_remove_medium(has_device, device, has_id, id, errp);
}
void qmp_block_passwd(bool has_device, const char *device,
@@ -2446,8 +2451,8 @@ void qmp_blockdev_close_tray(bool has_device, const char *device,
}
}
-void qmp_x_blockdev_remove_medium(bool has_device, const char *device,
- bool has_id, const char *id, Error **errp)
+static void blockdev_remove_medium(bool has_device, const char *device,
+ bool has_id, const char *id, Error **errp)
{
BlockBackend *blk;
BlockDriverState *bs;
@@ -2503,6 +2508,11 @@ out:
aio_context_release(aio_context);
}
+void qmp_x_blockdev_remove_medium(const char *id, Error **errp)
+{
+ blockdev_remove_medium(false, NULL, true, id, errp);
+}
+
static void qmp_blockdev_insert_anon_medium(BlockBackend *blk,
BlockDriverState *bs, Error **errp)
{
@@ -2548,9 +2558,9 @@ static void qmp_blockdev_insert_anon_medium(BlockBackend *blk,
}
}
-void qmp_x_blockdev_insert_medium(bool has_device, const char *device,
- bool has_id, const char *id,
- const char *node_name, Error **errp)
+static void blockdev_insert_medium(bool has_device, const char *device,
+ bool has_id, const char *id,
+ const char *node_name, Error **errp)
{
BlockBackend *blk;
BlockDriverState *bs;
@@ -2576,6 +2586,12 @@ void qmp_x_blockdev_insert_medium(bool has_device, const char *device,
qmp_blockdev_insert_anon_medium(blk, bs, errp);
}
+void qmp_x_blockdev_insert_medium(const char *id, const char *node_name,
+ Error **errp)
+{
+ blockdev_insert_medium(false, NULL, true, id, node_name, errp);
+}
+
void qmp_blockdev_change_medium(bool has_device, const char *device,
bool has_id, const char *id,
const char *filename,
@@ -2650,7 +2666,7 @@ void qmp_blockdev_change_medium(bool has_device, const char *device,
error_free(err);
err = NULL;
- qmp_x_blockdev_remove_medium(has_device, device, has_id, id, &err);
+ blockdev_remove_medium(has_device, device, has_id, id, &err);
if (err) {
error_propagate(errp, err);
goto fail;
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 09/29] blockdev: Mark BD-{remove, insert}-medium stable
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (7 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 08/29] blockdev: Drop BD-{remove, insert}-medium's @device Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 10/29] qemu-iotests: Fix locking issue in 102 Kevin Wolf
` (20 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
Now that iotest 093 test proves that the throttling configuration
survives a blockdev-remove-medium/blockdev-insert-medium pair, the
original reason for declaring these commands experimental is gone
(see commit 6e0abc251dd4f8eba1f53656dfede12e5840e83b).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-5-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
qapi/block-core.json | 32 +++++++++++++-------------------
blockdev.c | 6 +++---
tests/ahci-test.c | 4 ++--
tests/qemu-iotests/093 | 6 +++---
tests/qemu-iotests/118 | 20 ++++++++++----------
tests/qemu-iotests/139 | 2 +-
6 files changed, 32 insertions(+), 38 deletions(-)
diff --git a/qapi/block-core.json b/qapi/block-core.json
index d1df47de26..89ed2bc6a4 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -3403,7 +3403,7 @@
'*id': 'str' } }
##
-# @x-blockdev-remove-medium:
+# @blockdev-remove-medium:
#
# Removes a medium (a block driver state tree) from a block device. That block
# device's tray must currently be open (unless there is no attached guest
@@ -3411,16 +3411,13 @@
#
# If the tray is open and there is no medium inserted, this will be a no-op.
#
-# @id: The name or QOM path of the guest device (since: 2.8)
-#
-# Note: This command is still a work in progress and is considered experimental.
-# Stay away from it unless you want to help with its development.
+# @id: The name or QOM path of the guest device
#
-# Since: 2.5
+# Since: 2.12
#
# Example:
#
-# -> { "execute": "x-blockdev-remove-medium",
+# -> { "execute": "blockdev-remove-medium",
# "arguments": { "id": "ide0-1-0" } }
#
# <- { "error": { "class": "GenericError",
@@ -3438,30 +3435,27 @@
#
# <- { "return": {} }
#
-# -> { "execute": "x-blockdev-remove-medium",
+# -> { "execute": "blockdev-remove-medium",
# "arguments": { "id": "ide0-1-0" } }
#
# <- { "return": {} }
#
##
-{ 'command': 'x-blockdev-remove-medium',
+{ 'command': 'blockdev-remove-medium',
'data': { 'id': 'str' } }
##
-# @x-blockdev-insert-medium:
+# @blockdev-insert-medium:
#
# Inserts a medium (a block driver state tree) into a block device. That block
# device's tray must currently be open (unless there is no attached guest
# device) and there must be no medium inserted already.
#
-# @id: The name or QOM path of the guest device (since: 2.8)
+# @id: The name or QOM path of the guest device
#
# @node-name: name of a node in the block driver state graph
#
-# Note: This command is still a work in progress and is considered experimental.
-# Stay away from it unless you want to help with its development.
-#
-# Since: 2.5
+# Since: 2.12
#
# Example:
#
@@ -3473,14 +3467,14 @@
# "filename": "fedora.iso" } } }
# <- { "return": {} }
#
-# -> { "execute": "x-blockdev-insert-medium",
+# -> { "execute": "blockdev-insert-medium",
# "arguments": { "id": "ide0-1-0",
# "node-name": "node0" } }
#
# <- { "return": {} }
#
##
-{ 'command': 'x-blockdev-insert-medium',
+{ 'command': 'blockdev-insert-medium',
'data': { 'id': 'str',
'node-name': 'str'} }
@@ -3509,8 +3503,8 @@
#
# Changes the medium inserted into a block device by ejecting the current medium
# and loading a new image file which is inserted as the new medium (this command
-# combines blockdev-open-tray, x-blockdev-remove-medium,
-# x-blockdev-insert-medium and blockdev-close-tray).
+# combines blockdev-open-tray, blockdev-remove-medium, blockdev-insert-medium
+# and blockdev-close-tray).
#
# @device: Block device name (deprecated, use @id instead)
#
diff --git a/blockdev.c b/blockdev.c
index 2f9aef4167..8e977eef11 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -2508,7 +2508,7 @@ out:
aio_context_release(aio_context);
}
-void qmp_x_blockdev_remove_medium(const char *id, Error **errp)
+void qmp_blockdev_remove_medium(const char *id, Error **errp)
{
blockdev_remove_medium(false, NULL, true, id, errp);
}
@@ -2586,8 +2586,8 @@ static void blockdev_insert_medium(bool has_device, const char *device,
qmp_blockdev_insert_anon_medium(blk, bs, errp);
}
-void qmp_x_blockdev_insert_medium(const char *id, const char *node_name,
- Error **errp)
+void qmp_blockdev_insert_medium(const char *id, const char *node_name,
+ Error **errp)
{
blockdev_insert_medium(false, NULL, true, id, node_name, errp);
}
diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index 3635ea6d41..3934e62ef7 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -1596,7 +1596,7 @@ static void test_atapi_tray(void)
rsp = qmp_receive();
QDECREF(rsp);
- qmp_discard_response("{'execute': 'x-blockdev-remove-medium', "
+ qmp_discard_response("{'execute': 'blockdev-remove-medium', "
"'arguments': {'id': 'cd0'}}");
/* Test the tray without a medium */
@@ -1612,7 +1612,7 @@ static void test_atapi_tray(void)
"'driver': 'raw', "
"'file': { 'driver': 'file', "
"'filename': %s }}}", iso);
- qmp_discard_response("{'execute': 'x-blockdev-insert-medium',"
+ qmp_discard_response("{'execute': 'blockdev-insert-medium',"
"'arguments': { 'id': 'cd0', "
"'node-name': 'node0' }}");
diff --git a/tests/qemu-iotests/093 b/tests/qemu-iotests/093
index 5c36a5fb4d..c3404a3171 100755
--- a/tests/qemu-iotests/093
+++ b/tests/qemu-iotests/093
@@ -348,9 +348,9 @@ class ThrottleTestRemovableMedia(iotests.QMPTestCase):
# Now eject cd0 and insert cd1
result = self.vm.qmp("blockdev-open-tray", id='dev0')
self.assert_qmp(result, 'return', {})
- result = self.vm.qmp("x-blockdev-remove-medium", id='dev0')
+ result = self.vm.qmp("blockdev-remove-medium", id='dev0')
self.assert_qmp(result, 'return', {})
- result = self.vm.qmp("x-blockdev-insert-medium", id='dev0', node_name='cd1')
+ result = self.vm.qmp("blockdev-insert-medium", id='dev0', node_name='cd1')
self.assert_qmp(result, 'return', {})
# Check that the I/O limits are still the same
@@ -359,7 +359,7 @@ class ThrottleTestRemovableMedia(iotests.QMPTestCase):
self.assert_qmp(result, 'return[0]/inserted/bps', 50)
# Eject cd1
- result = self.vm.qmp("x-blockdev-remove-medium", id='dev0')
+ result = self.vm.qmp("blockdev-remove-medium", id='dev0')
self.assert_qmp(result, 'return', {})
# Check that we can't set limits if the device has no medium
diff --git a/tests/qemu-iotests/118 b/tests/qemu-iotests/118
index ca6965d23c..a0469b570e 100755
--- a/tests/qemu-iotests/118
+++ b/tests/qemu-iotests/118
@@ -233,7 +233,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
else:
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
- result = self.vm.qmp('x-blockdev-remove-medium',
+ result = self.vm.qmp('blockdev-remove-medium',
id=self.device_name)
self.assert_qmp(result, 'return', {})
@@ -242,7 +242,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/tray_open', True)
self.assert_qmp_absent(result, 'return[0]/inserted')
- result = self.vm.qmp('x-blockdev-insert-medium',
+ result = self.vm.qmp('blockdev-insert-medium',
id=self.device_name, node_name='new')
self.assert_qmp(result, 'return', {})
@@ -271,7 +271,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
if not self.has_real_tray:
return
- result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
+ result = self.vm.qmp('blockdev-remove-medium', id=self.device_name)
self.assert_qmp(result, 'error/class', 'GenericError')
def test_insert_on_closed(self):
@@ -285,7 +285,7 @@ class GeneralChangeTestsBaseClass(ChangeBaseClass):
'driver': 'file'})
self.assert_qmp(result, 'return', {})
- result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
+ result = self.vm.qmp('blockdev-insert-medium', id=self.device_name,
node_name='new')
self.assert_qmp(result, 'error/class', 'GenericError')
@@ -320,7 +320,7 @@ class TestInitiallyFilled(GeneralChangeTestsBaseClass):
self.wait_for_open()
- result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
+ result = self.vm.qmp('blockdev-insert-medium', id=self.device_name,
node_name='new')
self.assert_qmp(result, 'error/class', 'GenericError')
@@ -345,7 +345,7 @@ class TestInitiallyEmpty(GeneralChangeTestsBaseClass):
self.wait_for_open()
- result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
+ result = self.vm.qmp('blockdev-remove-medium', id=self.device_name)
# Should be a no-op
self.assert_qmp(result, 'return', {})
@@ -603,13 +603,13 @@ class TestChangeReadOnly(ChangeBaseClass):
self.assert_qmp(result, 'return[0]/inserted/ro', False)
self.assert_qmp(result, 'return[0]/inserted/image/filename', old_img)
- result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
+ result = self.vm.qmp('blockdev-remove-medium', id=self.device_name)
self.assert_qmp(result, 'return', {})
result = self.vm.qmp('query-block')
self.assert_qmp_absent(result, 'return[0]/inserted')
- result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
+ result = self.vm.qmp('blockdev-insert-medium', id=self.device_name,
node_name='new')
self.assert_qmp(result, 'return', {})
@@ -642,7 +642,7 @@ class TestBlockJobsAfterCycle(ChangeBaseClass):
# For device-less BBs, calling blockdev-open-tray or blockdev-close-tray
# is not necessary
- result = self.vm.qmp('x-blockdev-remove-medium', id=self.device_name)
+ result = self.vm.qmp('blockdev-remove-medium', id=self.device_name)
self.assert_qmp(result, 'return', {})
result = self.vm.qmp('query-block')
@@ -655,7 +655,7 @@ class TestBlockJobsAfterCycle(ChangeBaseClass):
'driver': 'file'})
self.assert_qmp(result, 'return', {})
- result = self.vm.qmp('x-blockdev-insert-medium', id=self.device_name,
+ result = self.vm.qmp('blockdev-insert-medium', id=self.device_name,
node_name='node0')
self.assert_qmp(result, 'return', {})
diff --git a/tests/qemu-iotests/139 b/tests/qemu-iotests/139
index f8f02808a9..cc7fe337f3 100644
--- a/tests/qemu-iotests/139
+++ b/tests/qemu-iotests/139
@@ -133,7 +133,7 @@ class TestBlockdevDel(iotests.QMPTestCase):
# Insert a BlockDriverState
def insertDrive(self, device, node):
self.checkBlockDriverState(node)
- result = self.vm.qmp('x-blockdev-insert-medium',
+ result = self.vm.qmp('blockdev-insert-medium',
id = device, node_name = node)
self.assert_qmp(result, 'return', {})
self.checkBlockDriverState(node)
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 10/29] qemu-iotests: Fix locking issue in 102
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (8 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 09/29] blockdev: Mark BD-{remove, insert}-medium stable Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 11/29] block/vmdk: Fix , instead of ; at end of line Kevin Wolf
` (19 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
102 truncates a qcow2 file (the raw file) on purpose while a VM is
running. However, image locking will usually prevent exactly this.
The fact that most people have not noticed until now (I suppose you may
have seen sporadic failures, but not taken them too seriously, like me)
further shows that this truncation is actually not really done
concurrently, but that the VM is still starting up by this point and has
not yet opened the image. Remedy this by waiting for the monitor shell
to appear before the qemu-img invocation so we know the VM is up.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171129185102.29390-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/102 | 7 ++++++-
tests/qemu-iotests/102.out | 3 ++-
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/tests/qemu-iotests/102 b/tests/qemu-iotests/102
index d7ad8d9840..04b3f28445 100755
--- a/tests/qemu-iotests/102
+++ b/tests/qemu-iotests/102
@@ -69,7 +69,12 @@ $QEMU_IO -c 'write 0 64k' "$TEST_IMG" | _filter_qemu_io
qemu_comm_method=monitor _launch_qemu -drive if=none,file="$TEST_IMG",id=drv0
-$QEMU_IMG resize -f raw --shrink "$TEST_IMG" $((5 * 64 * 1024))
+# Wait for a prompt to appear (so we know qemu has opened the image)
+_send_qemu_cmd '' '(qemu)'
+
+$QEMU_IMG resize --shrink --image-opts \
+ "driver=raw,file.driver=file,file.filename=$TEST_IMG,file.locking=off" \
+ $((5 * 64 * 1024))
_send_qemu_cmd $QEMU_HANDLE 'qemu-io drv0 map' 'allocated' \
| sed -e 's/^(qemu).*qemu-io drv0 map...$/(qemu) qemu-io drv0 map/'
diff --git a/tests/qemu-iotests/102.out b/tests/qemu-iotests/102.out
index ccf172abd9..4401b08fee 100644
--- a/tests/qemu-iotests/102.out
+++ b/tests/qemu-iotests/102.out
@@ -14,8 +14,9 @@ Offset Length Mapped to File
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=65536
wrote 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Image resized.
QEMU X.Y.Z monitor - type 'help' for more information
+Image resized.
+(qemu)
(qemu) qemu-io drv0 map
64 KiB (0x10000) bytes allocated at offset 0 bytes (0x0)
*** done
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 11/29] block/vmdk: Fix , instead of ; at end of line
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (9 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 10/29] qemu-iotests: Fix locking issue in 102 Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 12/29] qcow2: No persistent dirty bitmaps for compat=0.10 Kevin Wolf
` (18 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block/vmdk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/block/vmdk.c b/block/vmdk.c
index c665bcc977..1ae47b1c2e 100644
--- a/block/vmdk.c
+++ b/block/vmdk.c
@@ -1398,7 +1398,7 @@ static int vmdk_write_extent(VmdkExtent *extent, int64_t cluster_offset,
qemu_iovec_concat(&local_qiov, qiov, qiov_offset, n_bytes);
}
- write_offset = cluster_offset + offset_in_cluster,
+ write_offset = cluster_offset + offset_in_cluster;
ret = bdrv_co_pwritev(extent->file, write_offset, n_bytes,
&local_qiov, 0);
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 12/29] qcow2: No persistent dirty bitmaps for compat=0.10
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (10 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 11/29] block/vmdk: Fix , instead of ; at end of line Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 13/29] block/qcow: Add blkdebug events Kevin Wolf
` (17 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
Persistent dirty bitmaps require a properly functioning
autoclear_features field, or we cannot track when an unsupporting
program might overwrite them. Therefore, we cannot support them for
compat=0.10 images.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block/qcow2-bitmap.c | 10 ++++++++++
block/qcow2.c | 14 +++++++++++---
2 files changed, 21 insertions(+), 3 deletions(-)
diff --git a/block/qcow2-bitmap.c b/block/qcow2-bitmap.c
index f45e46cfbd..efa10c6663 100644
--- a/block/qcow2-bitmap.c
+++ b/block/qcow2-bitmap.c
@@ -1449,6 +1449,16 @@ bool qcow2_can_store_new_dirty_bitmap(BlockDriverState *bs,
bool found;
Qcow2BitmapList *bm_list;
+ if (s->qcow_version < 3) {
+ /* Without autoclear_features, we would always have to assume
+ * that a program without persistent dirty bitmap support has
+ * accessed this qcow2 file when opening it, and would thus
+ * have to drop all dirty bitmaps (defeating their purpose).
+ */
+ error_setg(errp, "Cannot store dirty bitmaps in qcow2 v2 files");
+ goto fail;
+ }
+
if (check_constraints_on_bitmap(bs, name, granularity, errp) != 0) {
goto fail;
}
diff --git a/block/qcow2.c b/block/qcow2.c
index 4348b2c0c5..1f80961e1b 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -302,9 +302,17 @@ static int qcow2_read_extensions(BlockDriverState *bs, uint64_t start_offset,
}
if (!(s->autoclear_features & QCOW2_AUTOCLEAR_BITMAPS)) {
- warn_report("a program lacking bitmap support "
- "modified this file, so all bitmaps are now "
- "considered inconsistent");
+ if (s->qcow_version < 3) {
+ /* Let's be a bit more specific */
+ warn_report("This qcow2 v2 image contains bitmaps, but "
+ "they may have been modified by a program "
+ "without persistent bitmap support; so now "
+ "they must all be considered inconsistent");
+ } else {
+ warn_report("a program lacking bitmap support "
+ "modified this file, so all bitmaps are now "
+ "considered inconsistent");
+ }
error_printf("Some clusters may be leaked, "
"run 'qemu-img check -r' on the image "
"file to fix.");
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 13/29] block/qcow: Add blkdebug events
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (11 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 12/29] qcow2: No persistent dirty bitmaps for compat=0.10 Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 14/29] block/vmdk: " Kevin Wolf
` (16 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
This is not necessarily complete, but it should include the most
important places.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block/qcow.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/block/qcow.c b/block/qcow.c
index 9569deeaf0..d552a6eba8 100644
--- a/block/qcow.c
+++ b/block/qcow.c
@@ -379,6 +379,7 @@ static int get_cluster_offset(BlockDriverState *bs,
/* update the L1 entry */
s->l1_table[l1_index] = l2_offset;
tmp = cpu_to_be64(l2_offset);
+ BLKDBG_EVENT(bs->file, BLKDBG_L1_UPDATE);
ret = bdrv_pwrite_sync(bs->file,
s->l1_table_offset + l1_index * sizeof(tmp),
&tmp, sizeof(tmp));
@@ -409,6 +410,7 @@ static int get_cluster_offset(BlockDriverState *bs,
}
}
l2_table = s->l2_cache + (min_index << s->l2_bits);
+ BLKDBG_EVENT(bs->file, BLKDBG_L2_LOAD);
if (new_l2_table) {
memset(l2_table, 0, s->l2_size * sizeof(uint64_t));
ret = bdrv_pwrite_sync(bs->file, l2_offset, l2_table,
@@ -432,6 +434,7 @@ static int get_cluster_offset(BlockDriverState *bs,
((cluster_offset & QCOW_OFLAG_COMPRESSED) && allocate == 1)) {
if (!allocate)
return 0;
+ BLKDBG_EVENT(bs->file, BLKDBG_CLUSTER_ALLOC);
/* allocate a new cluster */
if ((cluster_offset & QCOW_OFLAG_COMPRESSED) &&
(n_end - n_start) < s->cluster_sectors) {
@@ -447,6 +450,7 @@ static int get_cluster_offset(BlockDriverState *bs,
}
cluster_offset = QEMU_ALIGN_UP(cluster_offset, s->cluster_size);
/* write the cluster content */
+ BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO);
ret = bdrv_pwrite(bs->file, cluster_offset, s->cluster_cache,
s->cluster_size);
if (ret < 0) {
@@ -486,6 +490,7 @@ static int get_cluster_offset(BlockDriverState *bs,
NULL) < 0) {
return -EIO;
}
+ BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO);
ret = bdrv_pwrite(bs->file,
cluster_offset + i * 512,
s->cluster_data, 512);
@@ -503,6 +508,11 @@ static int get_cluster_offset(BlockDriverState *bs,
/* update L2 table */
tmp = cpu_to_be64(cluster_offset);
l2_table[l2_index] = tmp;
+ if (allocate == 2) {
+ BLKDBG_EVENT(bs->file, BLKDBG_L2_UPDATE_COMPRESSED);
+ } else {
+ BLKDBG_EVENT(bs->file, BLKDBG_L2_UPDATE);
+ }
ret = bdrv_pwrite_sync(bs->file, l2_offset + l2_index * sizeof(tmp),
&tmp, sizeof(tmp));
if (ret < 0) {
@@ -579,6 +589,7 @@ static int decompress_cluster(BlockDriverState *bs, uint64_t cluster_offset)
if (s->cluster_cache_offset != coffset) {
csize = cluster_offset >> (63 - s->cluster_bits);
csize &= (s->cluster_size - 1);
+ BLKDBG_EVENT(bs->file, BLKDBG_READ_COMPRESSED);
ret = bdrv_pread(bs->file, coffset, s->cluster_data, csize);
if (ret != csize)
return -1;
@@ -635,6 +646,8 @@ static coroutine_fn int qcow_co_readv(BlockDriverState *bs, int64_t sector_num,
hd_iov.iov_len = n * 512;
qemu_iovec_init_external(&hd_qiov, &hd_iov, 1);
qemu_co_mutex_unlock(&s->lock);
+ /* qcow2 emits this on bs->file instead of bs->backing */
+ BLKDBG_EVENT(bs->file, BLKDBG_READ_BACKING_AIO);
ret = bdrv_co_readv(bs->backing, sector_num, n, &hd_qiov);
qemu_co_mutex_lock(&s->lock);
if (ret < 0) {
@@ -661,6 +674,7 @@ static coroutine_fn int qcow_co_readv(BlockDriverState *bs, int64_t sector_num,
hd_iov.iov_len = n * 512;
qemu_iovec_init_external(&hd_qiov, &hd_iov, 1);
qemu_co_mutex_unlock(&s->lock);
+ BLKDBG_EVENT(bs->file, BLKDBG_READ_AIO);
ret = bdrv_co_readv(bs->file,
(cluster_offset >> 9) + index_in_cluster,
n, &hd_qiov);
@@ -754,6 +768,7 @@ static coroutine_fn int qcow_co_writev(BlockDriverState *bs, int64_t sector_num,
hd_iov.iov_len = n * 512;
qemu_iovec_init_external(&hd_qiov, &hd_iov, 1);
qemu_co_mutex_unlock(&s->lock);
+ BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO);
ret = bdrv_co_writev(bs->file,
(cluster_offset >> 9) + index_in_cluster,
n, &hd_qiov);
@@ -1048,6 +1063,7 @@ qcow_co_pwritev_compressed(BlockDriverState *bs, uint64_t offset,
.iov_len = out_len,
};
qemu_iovec_init_external(&hd_qiov, &iov, 1);
+ BLKDBG_EVENT(bs->file, BLKDBG_WRITE_COMPRESSED);
ret = bdrv_co_pwritev(bs->file, cluster_offset, out_len, &hd_qiov, 0);
if (ret < 0) {
goto fail;
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 14/29] block/vmdk: Add blkdebug events
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (12 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 13/29] block/qcow: Add blkdebug events Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 15/29] iotests: Fix _img_info for backslashes Kevin Wolf
` (15 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
This is certainly not complete, but it includes at least write_aio and
read_aio.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-5-mreitz@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block/vmdk.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/block/vmdk.c b/block/vmdk.c
index 1ae47b1c2e..d71cec4f31 100644
--- a/block/vmdk.c
+++ b/block/vmdk.c
@@ -1075,6 +1075,8 @@ static int get_whole_cluster(BlockDriverState *bs,
/* Read backing data before skip range */
if (skip_start_bytes > 0) {
if (bs->backing) {
+ /* qcow2 emits this on bs->file instead of bs->backing */
+ BLKDBG_EVENT(extent->file, BLKDBG_COW_READ);
ret = bdrv_pread(bs->backing, offset, whole_grain,
skip_start_bytes);
if (ret < 0) {
@@ -1082,6 +1084,7 @@ static int get_whole_cluster(BlockDriverState *bs,
goto exit;
}
}
+ BLKDBG_EVENT(extent->file, BLKDBG_COW_WRITE);
ret = bdrv_pwrite(extent->file, cluster_offset, whole_grain,
skip_start_bytes);
if (ret < 0) {
@@ -1092,6 +1095,8 @@ static int get_whole_cluster(BlockDriverState *bs,
/* Read backing data after skip range */
if (skip_end_bytes < cluster_bytes) {
if (bs->backing) {
+ /* qcow2 emits this on bs->file instead of bs->backing */
+ BLKDBG_EVENT(extent->file, BLKDBG_COW_READ);
ret = bdrv_pread(bs->backing, offset + skip_end_bytes,
whole_grain + skip_end_bytes,
cluster_bytes - skip_end_bytes);
@@ -1100,6 +1105,7 @@ static int get_whole_cluster(BlockDriverState *bs,
goto exit;
}
}
+ BLKDBG_EVENT(extent->file, BLKDBG_COW_WRITE);
ret = bdrv_pwrite(extent->file, cluster_offset + skip_end_bytes,
whole_grain + skip_end_bytes,
cluster_bytes - skip_end_bytes);
@@ -1120,6 +1126,7 @@ static int vmdk_L2update(VmdkExtent *extent, VmdkMetaData *m_data,
{
offset = cpu_to_le32(offset);
/* update L2 table */
+ BLKDBG_EVENT(extent->file, BLKDBG_L2_UPDATE);
if (bdrv_pwrite_sync(extent->file,
((int64_t)m_data->l2_offset * 512)
+ (m_data->l2_index * sizeof(offset)),
@@ -1218,6 +1225,7 @@ static int get_cluster_offset(BlockDriverState *bs,
}
}
l2_table = extent->l2_cache + (min_index * extent->l2_size);
+ BLKDBG_EVENT(extent->file, BLKDBG_L2_LOAD);
if (bdrv_pread(extent->file,
(int64_t)l2_offset * 512,
l2_table,
@@ -1393,9 +1401,13 @@ static int vmdk_write_extent(VmdkExtent *extent, int64_t cluster_offset,
.iov_len = n_bytes,
};
qemu_iovec_init_external(&local_qiov, &iov, 1);
+
+ BLKDBG_EVENT(extent->file, BLKDBG_WRITE_COMPRESSED);
} else {
qemu_iovec_init(&local_qiov, qiov->niov);
qemu_iovec_concat(&local_qiov, qiov, qiov_offset, n_bytes);
+
+ BLKDBG_EVENT(extent->file, BLKDBG_WRITE_AIO);
}
write_offset = cluster_offset + offset_in_cluster;
@@ -1437,6 +1449,7 @@ static int vmdk_read_extent(VmdkExtent *extent, int64_t cluster_offset,
if (!extent->compressed) {
+ BLKDBG_EVENT(extent->file, BLKDBG_READ_AIO);
ret = bdrv_co_preadv(extent->file,
cluster_offset + offset_in_cluster, bytes,
qiov, 0);
@@ -1450,6 +1463,7 @@ static int vmdk_read_extent(VmdkExtent *extent, int64_t cluster_offset,
buf_bytes = cluster_bytes * 2;
cluster_buf = g_malloc(buf_bytes);
uncomp_buf = g_malloc(cluster_bytes);
+ BLKDBG_EVENT(extent->file, BLKDBG_READ_COMPRESSED);
ret = bdrv_pread(extent->file,
cluster_offset,
cluster_buf, buf_bytes);
@@ -1527,6 +1541,8 @@ vmdk_co_preadv(BlockDriverState *bs, uint64_t offset, uint64_t bytes,
qemu_iovec_reset(&local_qiov);
qemu_iovec_concat(&local_qiov, qiov, bytes_done, n_bytes);
+ /* qcow2 emits this on bs->file instead of bs->backing */
+ BLKDBG_EVENT(bs->file, BLKDBG_READ_BACKING_AIO);
ret = bdrv_co_preadv(bs->backing, offset, n_bytes,
&local_qiov, 0);
if (ret < 0) {
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 15/29] iotests: Fix _img_info for backslashes
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (13 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 14/29] block/vmdk: " Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 16/29] iotests: Drop format-specific in _filter_img_info Kevin Wolf
` (14 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
read without -r eats backslashes.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-6-mreitz@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/common.rc | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tests/qemu-iotests/common.rc b/tests/qemu-iotests/common.rc
index dbae7d74ba..6fa0495e10 100644
--- a/tests/qemu-iotests/common.rc
+++ b/tests/qemu-iotests/common.rc
@@ -338,7 +338,7 @@ _img_info()
-e "s#$IMGFMT#IMGFMT#g" \
-e "/^disk size:/ D" \
-e "/actual-size/ D" | \
- while IFS='' read line; do
+ while IFS='' read -r line; do
if [[ $format_specific == 1 ]]; then
discard=0
elif [[ $line == "Format specific information:" ]]; then
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 16/29] iotests: Drop format-specific in _filter_img_info
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (14 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 15/29] iotests: Fix _img_info for backslashes Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 17/29] iotests: Forbid 020 for non-file protocols Kevin Wolf
` (13 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
_filter_img_info should remove format-specific information, too. We
already have such a filter in _img_info, and it is very useful for
query-block-named-block-nodes (etc.), too.
However, in 198 we need that information (but we still want the rest of
the filter), so make that filtering optional. Note that "the rest of
the filter" includes filtering of the test directory, so we can drop the
_filter_testdir from 198 at the same time.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-7-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/198 | 6 ++++--
tests/qemu-iotests/common.filter | 29 ++++++++++++++++++++++++++++-
2 files changed, 32 insertions(+), 3 deletions(-)
diff --git a/tests/qemu-iotests/198 b/tests/qemu-iotests/198
index 34ef666381..a84a058396 100755
--- a/tests/qemu-iotests/198
+++ b/tests/qemu-iotests/198
@@ -91,11 +91,13 @@ $QEMU_IO --object $SECRET0 --object $SECRET1 -c "read -P 0x9 0 $size" --image-op
echo
echo "== checking image base =="
-$QEMU_IMG info --image-opts $IMGSPECBASE | _filter_img_info | _filter_testdir | sed -e "/^disk size:/ D"
+$QEMU_IMG info --image-opts $IMGSPECBASE | _filter_img_info --format-specific \
+ | sed -e "/^disk size:/ D"
echo
echo "== checking image layer =="
-$QEMU_IMG info --image-opts $IMGSPECLAYER | _filter_img_info | _filter_testdir | sed -e "/^disk size:/ D"
+$QEMU_IMG info --image-opts $IMGSPECLAYER | _filter_img_info --format-specific \
+ | sed -e "/^disk size:/ D"
# success, all done
diff --git a/tests/qemu-iotests/common.filter b/tests/qemu-iotests/common.filter
index f08248bfd9..cb2be23340 100644
--- a/tests/qemu-iotests/common.filter
+++ b/tests/qemu-iotests/common.filter
@@ -140,6 +140,15 @@ _filter_img_create()
_filter_img_info()
{
+ if [[ "$1" == "--format-specific" ]]; then
+ local format_specific=1
+ shift
+ else
+ local format_specific=0
+ fi
+
+ discard=0
+ regex_json_spec_start='^ *"format-specific": \{'
sed -e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
-e "s#$TEST_DIR#TEST_DIR#g" \
-e "s#$IMGFMT#IMGFMT#g" \
@@ -160,7 +169,25 @@ _filter_img_info()
-e "/block_state_zero: \\(on\\|off\\)/d" \
-e "/log_size: [0-9]\\+/d" \
-e "s/iters: [0-9]\\+/iters: 1024/" \
- -e "s/uuid: [-a-f0-9]\\+/uuid: 00000000-0000-0000-0000-000000000000/"
+ -e "s/uuid: [-a-f0-9]\\+/uuid: 00000000-0000-0000-0000-000000000000/" | \
+ while IFS='' read -r line; do
+ if [[ $format_specific == 1 ]]; then
+ discard=0
+ elif [[ $line == "Format specific information:" ]]; then
+ discard=1
+ elif [[ $line =~ $regex_json_spec_start ]]; then
+ discard=2
+ regex_json_spec_end="^${line%%[^ ]*}\\},? *$"
+ fi
+ if [[ $discard == 0 ]]; then
+ echo "$line"
+ elif [[ $discard == 1 && ! $line ]]; then
+ echo
+ discard=0
+ elif [[ $discard == 2 && $line =~ $regex_json_spec_end ]]; then
+ discard=0
+ fi
+ done
}
# filter out offsets and file names from qemu-img map; good for both
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 17/29] iotests: Forbid 020 for non-file protocols
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (15 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 16/29] iotests: Drop format-specific in _filter_img_info Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 18/29] iotests: Skip 103 for refcount_bits=1 Kevin Wolf
` (12 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
This test does funny things like TEST_IMG="TEST_IMG.base" _make_test_img
that usually only work with the file protocol. More specifically, they
do not work with the most interesting non-file protocols, so we might as
well skip this for anything but file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-8-mreitz@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/020 | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/tests/qemu-iotests/020 b/tests/qemu-iotests/020
index cefe3a830e..d22ab81414 100755
--- a/tests/qemu-iotests/020
+++ b/tests/qemu-iotests/020
@@ -42,18 +42,12 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
# Any format supporting backing files
_supported_fmt qcow qcow2 vmdk qed
-_supported_proto generic
-_unsupported_proto vxhs
+_supported_proto file
_supported_os Linux
_unsupported_imgopts "subformat=monolithicFlat" \
"subformat=twoGbMaxExtentFlat" \
"subformat=twoGbMaxExtentSparse"
-# NFS does not support bdrv_reopen_prepare thus qemu-img commit fails.
-if [ "$IMGPROTO" = "nfs" ]; then
- _notrun "image protocol $IMGPROTO does not support bdrv_commit"
-fi
-
TEST_OFFSETS="0 4294967296"
TEST_IMG_SAVE="$TEST_IMG"
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 18/29] iotests: Skip 103 for refcount_bits=1
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (16 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 17/29] iotests: Forbid 020 for non-file protocols Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 19/29] iotests: Fix 020 for vmdk Kevin Wolf
` (11 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-9-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/103 | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tests/qemu-iotests/103 b/tests/qemu-iotests/103
index ecbd8ebd71..d0cfab8844 100755
--- a/tests/qemu-iotests/103
+++ b/tests/qemu-iotests/103
@@ -40,6 +40,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto file nfs
_supported_os Linux
+# Internal snapshots are (currently) impossible with refcount_bits=1
+_unsupported_imgopts 'refcount_bits=1[^0-9]'
IMG_SIZE=64K
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 19/29] iotests: Fix 020 for vmdk
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (17 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 18/29] iotests: Skip 103 for refcount_bits=1 Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 20/29] iotests: Fix 051 for compat=0.10 Kevin Wolf
` (10 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
vmdk cannot work with anything but vmdk backing files, so make the
backing file be the same format as the overlay.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-11-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/020 | 9 ++++++---
tests/qemu-iotests/020.out | 6 ++++--
2 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/tests/qemu-iotests/020 b/tests/qemu-iotests/020
index d22ab81414..eac5080f83 100755
--- a/tests/qemu-iotests/020
+++ b/tests/qemu-iotests/020
@@ -111,10 +111,12 @@ echo
echo 'Testing failing commit'
echo
+TEST_IMG="$TEST_IMG.base" _make_test_img 1M
+
# Create an image with a null backing file to which committing will fail (with
# ENOSPC so we can distinguish the result from some generic EIO which may be
# generated anywhere in the block layer)
-_make_test_img -b "json:{'driver': 'raw',
+_make_test_img -b "json:{'driver': '$IMGFMT',
'file': {
'driver': 'blkdebug',
'inject-error': [{
@@ -123,14 +125,15 @@ _make_test_img -b "json:{'driver': 'raw',
'once': true
}],
'image': {
- 'driver': 'null-co'
+ 'driver': 'file',
+ 'filename': '$TEST_IMG.base'
}}}"
# Just write anything so committing will not be a no-op
$QEMU_IO -c 'writev 0 64k' "$TEST_IMG" | _filter_qemu_io
$QEMU_IMG commit "$TEST_IMG"
-_cleanup_test_img
+_cleanup
# success, all done
echo "*** done"
diff --git a/tests/qemu-iotests/020.out b/tests/qemu-iotests/020.out
index 165b70aa49..4b722b2dd0 100644
--- a/tests/qemu-iotests/020.out
+++ b/tests/qemu-iotests/020.out
@@ -1078,7 +1078,8 @@ No errors were found on the image.
Testing failing commit
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824 backing_file=json:{'driver': 'raw',,
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=1048576
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=json:{'driver': 'IMGFMT',,
'file': {
'driver': 'blkdebug',,
'inject-error': [{
@@ -1087,7 +1088,8 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824 backing_file=json:{'d
'once': true
}],,
'image': {
- 'driver': 'null-co'
+ 'driver': 'file',,
+ 'filename': 'TEST_DIR/t.IMGFMT.base'
}}}
wrote 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 20/29] iotests: Fix 051 for compat=0.10
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (18 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 19/29] iotests: Fix 020 for vmdk Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 21/29] iotests: Fix 059's reference output Kevin Wolf
` (9 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
051 has both compat=1.1 and compat=0.10 tests (once it uses
lazy_refcounts, once it tests that setting them does not work).
For the compat=0.10 tests, it already explicitly creates a suitable
image. So let's just ignore the user-specified compat level for the
lazy_refcounts test and explicitly create a compat=1.1 image there, too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/051 | 2 ++
tests/qemu-iotests/051.out | 1 +
tests/qemu-iotests/051.pc.out | 1 +
3 files changed, 4 insertions(+)
diff --git a/tests/qemu-iotests/051 b/tests/qemu-iotests/051
index dba8816c9f..0c3be16489 100755
--- a/tests/qemu-iotests/051
+++ b/tests/qemu-iotests/051
@@ -131,6 +131,8 @@ echo
echo === Enable and disable lazy refcounting on the command line, plus some invalid values ===
echo
+_make_test_img -o compat=1.1 "$size"
+
run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=on
run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=off
run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=
diff --git a/tests/qemu-iotests/051.out b/tests/qemu-iotests/051.out
index e3c6eaba57..dd9846d1ce 100644
--- a/tests/qemu-iotests/051.out
+++ b/tests/qemu-iotests/051.out
@@ -77,6 +77,7 @@ QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.f
=== Enable and disable lazy refcounting on the command line, plus some invalid values ===
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
diff --git a/tests/qemu-iotests/051.pc.out b/tests/qemu-iotests/051.pc.out
index f2c5622cee..830c11880a 100644
--- a/tests/qemu-iotests/051.pc.out
+++ b/tests/qemu-iotests/051.pc.out
@@ -77,6 +77,7 @@ QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.f
=== Enable and disable lazy refcounting on the command line, plus some invalid values ===
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 21/29] iotests: Fix 059's reference output
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (19 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 20/29] iotests: Fix 051 for compat=0.10 Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 22/29] iotests: Fix 067 for compat=0.10 Kevin Wolf
` (8 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
As of commit 9877860e7bd1e26ee70ab9bb5ebc34c92bf23bf5, vmdk fails
differently when opening the sample image.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-13-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/059.out | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tests/qemu-iotests/059.out b/tests/qemu-iotests/059.out
index f6dce7947c..1ac5d56233 100644
--- a/tests/qemu-iotests/059.out
+++ b/tests/qemu-iotests/059.out
@@ -2358,5 +2358,5 @@ Offset Length Mapped to File
0x140000000 0x10000 0x50000 TEST_DIR/t-s003.vmdk
=== Testing afl image with a very large capacity ===
-qemu-img: Can't get image size 'TEST_DIR/afl9.IMGFMT': File too large
+qemu-img: Could not open 'TEST_DIR/afl9.IMGFMT': Could not open 'TEST_DIR/afl9.IMGFMT': Invalid argument
*** done
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 22/29] iotests: Fix 067 for compat=0.10
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (20 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 21/29] iotests: Fix 059's reference output Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 23/29] iotests: Make 089 compatible with compat=0.10 Kevin Wolf
` (7 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
067 works very well with compat=0.10 once you remove format-specific
information from the QMP output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-14-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/067 | 3 +-
tests/qemu-iotests/067.out | 97 +++++++++++++---------------------------------
2 files changed, 28 insertions(+), 72 deletions(-)
diff --git a/tests/qemu-iotests/067 b/tests/qemu-iotests/067
index 9d561ef786..fe259f6165 100755
--- a/tests/qemu-iotests/067
+++ b/tests/qemu-iotests/067
@@ -57,7 +57,8 @@ function run_qemu()
{
do_run_qemu "$@" 2>&1 | _filter_testdir | _filter_qmp | _filter_qemu \
| _filter_actual_image_size \
- | _filter_generated_node_ids | _filter_qmp_events
+ | _filter_generated_node_ids | _filter_qmp_events \
+ | _filter_img_info
}
size=128M
diff --git a/tests/qemu-iotests/067.out b/tests/qemu-iotests/067.out
index 58e83c4505..2e71cff3ce 100644
--- a/tests/qemu-iotests/067.out
+++ b/tests/qemu-iotests/067.out
@@ -3,7 +3,7 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
=== -drive/-device and device_del ===
-Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,if=none,id=disk -device virtio-blk,drive=disk,id=virtio0
+Testing: -drive file=TEST_DIR/t.IMGFMT,format=IMGFMT,if=none,id=disk -device virtio-blk,drive=disk,id=virtio0
{
QMP_VERSION
}
@@ -23,26 +23,17 @@ Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,if=none,id=disk -device virti
"detect_zeroes": "off",
"image": {
"virtual-size": 134217728,
- "filename": "TEST_DIR/t.qcow2",
+ "filename": "TEST_DIR/t.IMGFMT",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
"dirty-flag": false
},
"iops_wr": 0,
"ro": false,
"node-name": "NODE_NAME",
"backing_file_depth": 0,
- "drv": "qcow2",
+ "drv": "IMGFMT",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
@@ -54,7 +45,7 @@ Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,if=none,id=disk -device virti
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2",
+ "file": "TEST_DIR/t.IMGFMT",
"encryption_key_missing": false
},
"qdev": "/machine/peripheral/virtio0/virtio-backend",
@@ -81,7 +72,7 @@ Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,if=none,id=disk -device virti
=== -drive/device_add and device_del ===
-Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,if=none,id=disk
+Testing: -drive file=TEST_DIR/t.IMGFMT,format=IMGFMT,if=none,id=disk
{
QMP_VERSION
}
@@ -100,26 +91,17 @@ Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,if=none,id=disk
"detect_zeroes": "off",
"image": {
"virtual-size": 134217728,
- "filename": "TEST_DIR/t.qcow2",
+ "filename": "TEST_DIR/t.IMGFMT",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
"dirty-flag": false
},
"iops_wr": 0,
"ro": false,
"node-name": "NODE_NAME",
"backing_file_depth": 0,
- "drv": "qcow2",
+ "drv": "IMGFMT",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
@@ -131,7 +113,7 @@ Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,if=none,id=disk
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2",
+ "file": "TEST_DIR/t.IMGFMT",
"encryption_key_missing": false
},
"type": "unknown"
@@ -183,26 +165,17 @@ Testing:
"detect_zeroes": "off",
"image": {
"virtual-size": 134217728,
- "filename": "TEST_DIR/t.qcow2",
+ "filename": "TEST_DIR/t.IMGFMT",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
"dirty-flag": false
},
"iops_wr": 0,
"ro": false,
"node-name": "NODE_NAME",
"backing_file_depth": 0,
- "drv": "qcow2",
+ "drv": "IMGFMT",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
@@ -214,7 +187,7 @@ Testing:
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2",
+ "file": "TEST_DIR/t.IMGFMT",
"encryption_key_missing": false
},
"type": "unknown"
@@ -263,26 +236,17 @@ Testing:
"detect_zeroes": "off",
"image": {
"virtual-size": 134217728,
- "filename": "TEST_DIR/t.qcow2",
+ "filename": "TEST_DIR/t.IMGFMT",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
"dirty-flag": false
},
"iops_wr": 0,
"ro": false,
"node-name": "disk",
"backing_file_depth": 0,
- "drv": "qcow2",
+ "drv": "IMGFMT",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
@@ -294,7 +258,7 @@ Testing:
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2",
+ "file": "TEST_DIR/t.IMGFMT",
"encryption_key_missing": false
},
{
@@ -302,7 +266,7 @@ Testing:
"detect_zeroes": "off",
"image": {
"virtual-size": 197120,
- "filename": "TEST_DIR/t.qcow2",
+ "filename": "TEST_DIR/t.IMGFMT",
"format": "file",
"actual-size": SIZE,
"dirty-flag": false
@@ -323,7 +287,7 @@ Testing:
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2",
+ "file": "TEST_DIR/t.IMGFMT",
"encryption_key_missing": false
}
]
@@ -347,26 +311,17 @@ Testing:
"detect_zeroes": "off",
"image": {
"virtual-size": 134217728,
- "filename": "TEST_DIR/t.qcow2",
+ "filename": "TEST_DIR/t.IMGFMT",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
"dirty-flag": false
},
"iops_wr": 0,
"ro": false,
"node-name": "disk",
"backing_file_depth": 0,
- "drv": "qcow2",
+ "drv": "IMGFMT",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
@@ -378,7 +333,7 @@ Testing:
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2",
+ "file": "TEST_DIR/t.IMGFMT",
"encryption_key_missing": false
},
{
@@ -386,7 +341,7 @@ Testing:
"detect_zeroes": "off",
"image": {
"virtual-size": 197120,
- "filename": "TEST_DIR/t.qcow2",
+ "filename": "TEST_DIR/t.IMGFMT",
"format": "file",
"actual-size": SIZE,
"dirty-flag": false
@@ -407,7 +362,7 @@ Testing:
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2",
+ "file": "TEST_DIR/t.IMGFMT",
"encryption_key_missing": false
}
]
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 23/29] iotests: Make 089 compatible with compat=0.10
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (21 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 22/29] iotests: Fix 067 for compat=0.10 Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 24/29] iotests: Make 184 image-less Kevin Wolf
` (6 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
The only thing that is missing is a _filter_img_info after the
"$QEMU_IO -c info" invocations.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-15-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/089 | 4 ++--
tests/qemu-iotests/089.out | 10 ----------
2 files changed, 2 insertions(+), 12 deletions(-)
diff --git a/tests/qemu-iotests/089 b/tests/qemu-iotests/089
index 9bfe2307b3..0b059aba90 100755
--- a/tests/qemu-iotests/089
+++ b/tests/qemu-iotests/089
@@ -119,11 +119,11 @@ echo
# Both options given directly and those given in the filename should be used
$QEMU_IO -c "open -o driver=qcow2 json:{\"file.filename\":\"$TEST_IMG\"}" \
- -c "info" 2>&1 | _filter_testdir | _filter_imgfmt
+ -c "info" 2>&1 | _filter_img_info
# Options given directly should be prioritized over those given in the filename
$QEMU_IO -c "open -o driver=qcow2 json:{\"driver\":\"raw\",\"file.filename\":\"$TEST_IMG\"}" \
- -c "info" 2>&1 | _filter_testdir | _filter_imgfmt
+ -c "info" 2>&1 | _filter_img_info
# success, all done
diff --git a/tests/qemu-iotests/089.out b/tests/qemu-iotests/089.out
index 18f5fdda7a..0bf5a13ec1 100644
--- a/tests/qemu-iotests/089.out
+++ b/tests/qemu-iotests/089.out
@@ -38,17 +38,7 @@ cluster_size: 65536
format name: IMGFMT
cluster size: 64 KiB
vm state offset: 512 MiB
-Format specific information:
- compat: 1.1
- lazy refcounts: false
- refcount bits: 16
- corrupt: false
format name: IMGFMT
cluster size: 64 KiB
vm state offset: 512 MiB
-Format specific information:
- compat: 1.1
- lazy refcounts: false
- refcount bits: 16
- corrupt: false
*** done
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 24/29] iotests: Make 184 image-less
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (22 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 23/29] iotests: Make 089 compatible with compat=0.10 Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 25/29] iotests: Make 191 work with qcow2 options Kevin Wolf
` (5 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
184 does not need an image, so don't use one.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-16-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/184 | 25 ++++--------------
tests/qemu-iotests/184.out | 63 +++++++---------------------------------------
2 files changed, 14 insertions(+), 74 deletions(-)
diff --git a/tests/qemu-iotests/184 b/tests/qemu-iotests/184
index ee96c99af3..2b68284d58 100755
--- a/tests/qemu-iotests/184
+++ b/tests/qemu-iotests/184
@@ -27,18 +27,12 @@ echo "QA output created by $seq"
here=`pwd`
status=1 # failure is the default!
-_cleanup()
-{
- _cleanup_test_img
-}
-trap "_cleanup; exit \$status" 0 1 2 3 15
+trap "exit \$status" 0 1 2 3 15
# get standard environment, filters and checks
. ./common.rc
. ./common.filter
-_supported_fmt qcow2
-_supported_proto file
_supported_os Linux
function do_run_qemu()
@@ -55,7 +49,6 @@ function run_qemu()
| _filter_actual_image_size
}
-_make_test_img 64M
test_throttle=$($QEMU_IMG --help|grep throttle)
[ "$test_throttle" = "" ] && _supported_fmt throttle
@@ -66,12 +59,8 @@ run_qemu <<EOF
{ "execute": "qmp_capabilities" }
{ "execute": "blockdev-add",
"arguments": {
- "driver": "$IMGFMT",
- "node-name": "disk0",
- "file": {
- "driver": "file",
- "filename": "$TEST_IMG"
- }
+ "driver": "null-co",
+ "node-name": "disk0"
}
}
{ "execute": "object-add",
@@ -181,12 +170,8 @@ run_qemu <<EOF
{ "execute": "qmp_capabilities" }
{ "execute": "blockdev-add",
"arguments": {
- "driver": "$IMGFMT",
- "node-name": "disk0",
- "file": {
- "driver": "file",
- "filename": "$TEST_IMG"
- }
+ "driver": "null-co",
+ "node-name": "disk0"
}
}
{ "execute": "blockdev-add",
diff --git a/tests/qemu-iotests/184.out b/tests/qemu-iotests/184.out
index 4dc7984a85..672650cde8 100644
--- a/tests/qemu-iotests/184.out
+++ b/tests/qemu-iotests/184.out
@@ -1,5 +1,4 @@
QA output created by 184
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
== checking interface ==
Testing:
@@ -28,12 +27,9 @@ Testing:
"iops_rd": 0,
"detect_zeroes": "off",
"image": {
- "virtual-size": 67108864,
- "filename": "json:{\"throttle-group\": \"group0\", \"driver\": \"throttle\", \"file\": {\"driver\": \"qcow2\", \"file\": {\"driver\": \"file\", \"filename\": \"TEST_DIR/t.qcow2\"}}}",
- "cluster-size": 65536,
- "format": "throttle",
- "actual-size": SIZE,
- "dirty-flag": false
+ "virtual-size": 1073741824,
+ "filename": "json:{\"throttle-group\": \"group0\", \"driver\": \"throttle\", \"file\": {\"driver\": \"null-co\"}}",
+ "format": "throttle"
},
"iops_wr": 0,
"ro": false,
@@ -51,34 +47,22 @@ Testing:
"direct": false,
"writeback": true
},
- "file": "json:{\"throttle-group\": \"group0\", \"driver\": \"throttle\", \"file\": {\"driver\": \"qcow2\", \"file\": {\"driver\": \"file\", \"filename\": \"TEST_DIR/t.qcow2\"}}}",
+ "file": "json:{\"throttle-group\": \"group0\", \"driver\": \"throttle\", \"file\": {\"driver\": \"null-co\"}}",
"encryption_key_missing": false
},
{
"iops_rd": 0,
"detect_zeroes": "off",
"image": {
- "virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2",
- "cluster-size": 65536,
- "format": "qcow2",
- "actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
- "dirty-flag": false
+ "virtual-size": 1073741824,
+ "filename": "null-co://",
+ "format": "null-co"
},
"iops_wr": 0,
"ro": false,
"node-name": "disk0",
"backing_file_depth": 0,
- "drv": "qcow2",
+ "drv": "null-co",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
@@ -90,36 +74,7 @@ Testing:
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2",
- "encryption_key_missing": false
- },
- {
- "iops_rd": 0,
- "detect_zeroes": "off",
- "image": {
- "virtual-size": 197120,
- "filename": "TEST_DIR/t.qcow2",
- "format": "file",
- "actual-size": SIZE,
- "dirty-flag": false
- },
- "iops_wr": 0,
- "ro": false,
- "node-name": "NODE_NAME",
- "backing_file_depth": 0,
- "drv": "file",
- "iops": 0,
- "bps_wr": 0,
- "write_threshold": 0,
- "encrypted": false,
- "bps": 0,
- "bps_rd": 0,
- "cache": {
- "no-flush": false,
- "direct": false,
- "writeback": true
- },
- "file": "TEST_DIR/t.qcow2",
+ "file": "null-co://",
"encryption_key_missing": false
}
]
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 25/29] iotests: Make 191 work with qcow2 options
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (23 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 24/29] iotests: Make 184 image-less Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 26/29] iotests: Filter compat-dependent info in 198 Kevin Wolf
` (4 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
In order for 191 to work with an explicit refcount_bits or compat=0.10,
we should strip format-specific information from the output--and we can
do so by using _filter_img_info.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-17-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/191 | 5 +-
tests/qemu-iotests/191.out | 313 +++++++++++++--------------------------------
2 files changed, 91 insertions(+), 227 deletions(-)
diff --git a/tests/qemu-iotests/191 b/tests/qemu-iotests/191
index ad785e10b1..dfad6555e4 100755
--- a/tests/qemu-iotests/191
+++ b/tests/qemu-iotests/191
@@ -45,7 +45,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
. ./common.qemu
_supported_fmt qcow2
-_unsupported_imgopts compat=0.10
_supported_proto file
_supported_os Linux
@@ -92,7 +91,7 @@ echo === Check that both top and top2 point to base now ===
echo
_send_qemu_cmd $h "{ 'execute': 'query-named-block-nodes' }" "^}" |
- _filter_generated_node_ids | _filter_actual_image_size
+ _filter_generated_node_ids | _filter_actual_image_size | _filter_img_info
_send_qemu_cmd $h "{ 'execute': 'quit' }" "^}"
wait=1 _cleanup_qemu
@@ -140,7 +139,7 @@ echo === Check that both top and top2 point to base now ===
echo
_send_qemu_cmd $h "{ 'execute': 'query-named-block-nodes' }" "^}" |
- _filter_generated_node_ids | _filter_actual_image_size
+ _filter_generated_node_ids | _filter_actual_image_size | _filter_img_info
_send_qemu_cmd $h "{ 'execute': 'quit' }" "^}"
wait=1 _cleanup_qemu
diff --git a/tests/qemu-iotests/191.out b/tests/qemu-iotests/191.out
index 73c0ed454c..190c5f049a 100644
--- a/tests/qemu-iotests/191.out
+++ b/tests/qemu-iotests/191.out
@@ -44,49 +44,31 @@ wrote 65536/65536 bytes at offset 1048576
"image": {
"backing-image": {
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2.base",
+ "filename": "TEST_DIR/t.IMGFMT.base",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
"dirty-flag": false
},
- "backing-filename-format": "qcow2",
+ "backing-filename-format": "IMGFMT",
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2.ovl2",
+ "filename": "TEST_DIR/t.IMGFMT.ovl2",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
- "full-backing-filename": "TEST_DIR/t.qcow2.base",
- "backing-filename": "TEST_DIR/t.qcow2.base",
+ "full-backing-filename": "TEST_DIR/t.IMGFMT.base",
+ "backing-filename": "TEST_DIR/t.IMGFMT.base",
"dirty-flag": false
},
"iops_wr": 0,
"ro": false,
"node-name": "top2",
"backing_file_depth": 1,
- "drv": "qcow2",
+ "drv": "IMGFMT",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
- "backing_file": "TEST_DIR/t.qcow2.base",
+ "backing_file": "TEST_DIR/t.IMGFMT.base",
"encrypted": false,
"bps": 0,
"bps_rd": 0,
@@ -95,7 +77,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2.ovl2",
+ "file": "TEST_DIR/t.IMGFMT.ovl2",
"encryption_key_missing": false
},
{
@@ -103,7 +85,7 @@ wrote 65536/65536 bytes at offset 1048576
"detect_zeroes": "off",
"image": {
"virtual-size": 197120,
- "filename": "TEST_DIR/t.qcow2.ovl2",
+ "filename": "TEST_DIR/t.IMGFMT.ovl2",
"format": "file",
"actual-size": SIZE,
"dirty-flag": false
@@ -124,7 +106,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2.ovl2",
+ "file": "TEST_DIR/t.IMGFMT.ovl2",
"encryption_key_missing": false
},
{
@@ -133,49 +115,31 @@ wrote 65536/65536 bytes at offset 1048576
"image": {
"backing-image": {
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2.base",
+ "filename": "TEST_DIR/t.IMGFMT.base",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
"dirty-flag": false
},
- "backing-filename-format": "qcow2",
+ "backing-filename-format": "IMGFMT",
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2",
+ "filename": "TEST_DIR/t.IMGFMT",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
- "full-backing-filename": "TEST_DIR/t.qcow2.base",
- "backing-filename": "TEST_DIR/t.qcow2.base",
+ "full-backing-filename": "TEST_DIR/t.IMGFMT.base",
+ "backing-filename": "TEST_DIR/t.IMGFMT.base",
"dirty-flag": false
},
"iops_wr": 0,
"ro": false,
"node-name": "top",
"backing_file_depth": 1,
- "drv": "qcow2",
+ "drv": "IMGFMT",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
- "backing_file": "TEST_DIR/t.qcow2.base",
+ "backing_file": "TEST_DIR/t.IMGFMT.base",
"encrypted": false,
"bps": 0,
"bps_rd": 0,
@@ -184,7 +148,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2",
+ "file": "TEST_DIR/t.IMGFMT",
"encryption_key_missing": false
},
{
@@ -192,7 +156,7 @@ wrote 65536/65536 bytes at offset 1048576
"detect_zeroes": "off",
"image": {
"virtual-size": 197120,
- "filename": "TEST_DIR/t.qcow2",
+ "filename": "TEST_DIR/t.IMGFMT",
"format": "file",
"actual-size": SIZE,
"dirty-flag": false
@@ -213,7 +177,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2",
+ "file": "TEST_DIR/t.IMGFMT",
"encryption_key_missing": false
},
{
@@ -222,49 +186,31 @@ wrote 65536/65536 bytes at offset 1048576
"image": {
"backing-image": {
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2.base",
+ "filename": "TEST_DIR/t.IMGFMT.base",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
"dirty-flag": false
},
- "backing-filename-format": "qcow2",
+ "backing-filename-format": "IMGFMT",
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2.mid",
+ "filename": "TEST_DIR/t.IMGFMT.mid",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
- "full-backing-filename": "TEST_DIR/t.qcow2.base",
- "backing-filename": "TEST_DIR/t.qcow2.base",
+ "full-backing-filename": "TEST_DIR/t.IMGFMT.base",
+ "backing-filename": "TEST_DIR/t.IMGFMT.base",
"dirty-flag": false
},
"iops_wr": 0,
"ro": false,
"node-name": "mid",
"backing_file_depth": 1,
- "drv": "qcow2",
+ "drv": "IMGFMT",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
- "backing_file": "TEST_DIR/t.qcow2.base",
+ "backing_file": "TEST_DIR/t.IMGFMT.base",
"encrypted": false,
"bps": 0,
"bps_rd": 0,
@@ -273,7 +219,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2.mid",
+ "file": "TEST_DIR/t.IMGFMT.mid",
"encryption_key_missing": false
},
{
@@ -281,7 +227,7 @@ wrote 65536/65536 bytes at offset 1048576
"detect_zeroes": "off",
"image": {
"virtual-size": 393216,
- "filename": "TEST_DIR/t.qcow2.mid",
+ "filename": "TEST_DIR/t.IMGFMT.mid",
"format": "file",
"actual-size": SIZE,
"dirty-flag": false
@@ -302,7 +248,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2.mid",
+ "file": "TEST_DIR/t.IMGFMT.mid",
"encryption_key_missing": false
},
{
@@ -310,26 +256,17 @@ wrote 65536/65536 bytes at offset 1048576
"detect_zeroes": "off",
"image": {
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2.base",
+ "filename": "TEST_DIR/t.IMGFMT.base",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
"dirty-flag": false
},
"iops_wr": 0,
"ro": false,
"node-name": "base",
"backing_file_depth": 0,
- "drv": "qcow2",
+ "drv": "IMGFMT",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
@@ -341,7 +278,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2.base",
+ "file": "TEST_DIR/t.IMGFMT.base",
"encryption_key_missing": false
},
{
@@ -349,7 +286,7 @@ wrote 65536/65536 bytes at offset 1048576
"detect_zeroes": "off",
"image": {
"virtual-size": 393216,
- "filename": "TEST_DIR/t.qcow2.base",
+ "filename": "TEST_DIR/t.IMGFMT.base",
"format": "file",
"actual-size": SIZE,
"dirty-flag": false
@@ -370,7 +307,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2.base",
+ "file": "TEST_DIR/t.IMGFMT.base",
"encryption_key_missing": false
}
]
@@ -447,49 +384,31 @@ wrote 65536/65536 bytes at offset 1048576
"image": {
"backing-image": {
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2.base",
+ "filename": "TEST_DIR/t.IMGFMT.base",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
"dirty-flag": false
},
- "backing-filename-format": "qcow2",
+ "backing-filename-format": "IMGFMT",
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2.ovl2",
+ "filename": "TEST_DIR/t.IMGFMT.ovl2",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
- "full-backing-filename": "TEST_DIR/t.qcow2.base",
- "backing-filename": "TEST_DIR/t.qcow2.base",
+ "full-backing-filename": "TEST_DIR/t.IMGFMT.base",
+ "backing-filename": "TEST_DIR/t.IMGFMT.base",
"dirty-flag": false
},
"iops_wr": 0,
"ro": true,
"node-name": "NODE_NAME",
"backing_file_depth": 1,
- "drv": "qcow2",
+ "drv": "IMGFMT",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
- "backing_file": "TEST_DIR/t.qcow2.base",
+ "backing_file": "TEST_DIR/t.IMGFMT.base",
"encrypted": false,
"bps": 0,
"bps_rd": 0,
@@ -498,7 +417,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2.ovl2",
+ "file": "TEST_DIR/t.IMGFMT.ovl2",
"encryption_key_missing": false
},
{
@@ -506,7 +425,7 @@ wrote 65536/65536 bytes at offset 1048576
"detect_zeroes": "off",
"image": {
"virtual-size": 197120,
- "filename": "TEST_DIR/t.qcow2.ovl2",
+ "filename": "TEST_DIR/t.IMGFMT.ovl2",
"format": "file",
"actual-size": SIZE,
"dirty-flag": false
@@ -527,7 +446,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2.ovl2",
+ "file": "TEST_DIR/t.IMGFMT.ovl2",
"encryption_key_missing": false
},
{
@@ -537,68 +456,41 @@ wrote 65536/65536 bytes at offset 1048576
"backing-image": {
"backing-image": {
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2.base",
+ "filename": "TEST_DIR/t.IMGFMT.base",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
"dirty-flag": false
},
- "backing-filename-format": "qcow2",
+ "backing-filename-format": "IMGFMT",
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2.ovl2",
+ "filename": "TEST_DIR/t.IMGFMT.ovl2",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
- "full-backing-filename": "TEST_DIR/t.qcow2.base",
- "backing-filename": "TEST_DIR/t.qcow2.base",
+ "full-backing-filename": "TEST_DIR/t.IMGFMT.base",
+ "backing-filename": "TEST_DIR/t.IMGFMT.base",
"dirty-flag": false
},
- "backing-filename-format": "qcow2",
+ "backing-filename-format": "IMGFMT",
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2.ovl3",
+ "filename": "TEST_DIR/t.IMGFMT.ovl3",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
- "full-backing-filename": "TEST_DIR/t.qcow2.ovl2",
- "backing-filename": "TEST_DIR/t.qcow2.ovl2",
+ "full-backing-filename": "TEST_DIR/t.IMGFMT.ovl2",
+ "backing-filename": "TEST_DIR/t.IMGFMT.ovl2",
"dirty-flag": false
},
"iops_wr": 0,
"ro": false,
"node-name": "top2",
"backing_file_depth": 2,
- "drv": "qcow2",
+ "drv": "IMGFMT",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
- "backing_file": "TEST_DIR/t.qcow2.ovl2",
+ "backing_file": "TEST_DIR/t.IMGFMT.ovl2",
"encrypted": false,
"bps": 0,
"bps_rd": 0,
@@ -607,7 +499,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2.ovl3",
+ "file": "TEST_DIR/t.IMGFMT.ovl3",
"encryption_key_missing": false
},
{
@@ -615,7 +507,7 @@ wrote 65536/65536 bytes at offset 1048576
"detect_zeroes": "off",
"image": {
"virtual-size": 197120,
- "filename": "TEST_DIR/t.qcow2.ovl3",
+ "filename": "TEST_DIR/t.IMGFMT.ovl3",
"format": "file",
"actual-size": SIZE,
"dirty-flag": false
@@ -636,7 +528,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2.ovl3",
+ "file": "TEST_DIR/t.IMGFMT.ovl3",
"encryption_key_missing": false
},
{
@@ -644,26 +536,17 @@ wrote 65536/65536 bytes at offset 1048576
"detect_zeroes": "off",
"image": {
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2.base",
+ "filename": "TEST_DIR/t.IMGFMT.base",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
"dirty-flag": false
},
"iops_wr": 0,
"ro": true,
"node-name": "NODE_NAME",
"backing_file_depth": 0,
- "drv": "qcow2",
+ "drv": "IMGFMT",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
@@ -675,7 +558,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2.base",
+ "file": "TEST_DIR/t.IMGFMT.base",
"encryption_key_missing": false
},
{
@@ -683,7 +566,7 @@ wrote 65536/65536 bytes at offset 1048576
"detect_zeroes": "off",
"image": {
"virtual-size": 393216,
- "filename": "TEST_DIR/t.qcow2.base",
+ "filename": "TEST_DIR/t.IMGFMT.base",
"format": "file",
"actual-size": SIZE,
"dirty-flag": false
@@ -704,7 +587,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2.base",
+ "file": "TEST_DIR/t.IMGFMT.base",
"encryption_key_missing": false
},
{
@@ -713,49 +596,31 @@ wrote 65536/65536 bytes at offset 1048576
"image": {
"backing-image": {
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2.base",
+ "filename": "TEST_DIR/t.IMGFMT.base",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
"dirty-flag": false
},
- "backing-filename-format": "qcow2",
+ "backing-filename-format": "IMGFMT",
"virtual-size": 67108864,
- "filename": "TEST_DIR/t.qcow2",
+ "filename": "TEST_DIR/t.IMGFMT",
"cluster-size": 65536,
- "format": "qcow2",
+ "format": "IMGFMT",
"actual-size": SIZE,
- "format-specific": {
- "type": "qcow2",
- "data": {
- "compat": "1.1",
- "lazy-refcounts": false,
- "refcount-bits": 16,
- "corrupt": false
- }
- },
- "full-backing-filename": "TEST_DIR/t.qcow2.base",
- "backing-filename": "TEST_DIR/t.qcow2.base",
+ "full-backing-filename": "TEST_DIR/t.IMGFMT.base",
+ "backing-filename": "TEST_DIR/t.IMGFMT.base",
"dirty-flag": false
},
"iops_wr": 0,
"ro": false,
"node-name": "top",
"backing_file_depth": 1,
- "drv": "qcow2",
+ "drv": "IMGFMT",
"iops": 0,
"bps_wr": 0,
"write_threshold": 0,
- "backing_file": "TEST_DIR/t.qcow2.base",
+ "backing_file": "TEST_DIR/t.IMGFMT.base",
"encrypted": false,
"bps": 0,
"bps_rd": 0,
@@ -764,7 +629,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2",
+ "file": "TEST_DIR/t.IMGFMT",
"encryption_key_missing": false
},
{
@@ -772,7 +637,7 @@ wrote 65536/65536 bytes at offset 1048576
"detect_zeroes": "off",
"image": {
"virtual-size": 197120,
- "filename": "TEST_DIR/t.qcow2",
+ "filename": "TEST_DIR/t.IMGFMT",
"format": "file",
"actual-size": SIZE,
"dirty-flag": false
@@ -793,7 +658,7 @@ wrote 65536/65536 bytes at offset 1048576
"direct": false,
"writeback": true
},
- "file": "TEST_DIR/t.qcow2",
+ "file": "TEST_DIR/t.IMGFMT",
"encryption_key_missing": false
}
]
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 26/29] iotests: Filter compat-dependent info in 198
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (24 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 25/29] iotests: Make 191 work with qcow2 options Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:01 ` [Qemu-devel] [PULL 27/29] iotests: Make 059 pass on machines with little RAM Kevin Wolf
` (3 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
There is a bit of image-specific information which depends on the qcow2
compat level. Filter it so that 198 works with compat=0.10 (and any
refcount_bits value).
Note that we cannot simply drop the --format-specific switch because we
do need the "encrypt" information.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-18-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/198 | 6 ++++--
tests/qemu-iotests/198.out | 8 --------
2 files changed, 4 insertions(+), 10 deletions(-)
diff --git a/tests/qemu-iotests/198 b/tests/qemu-iotests/198
index a84a058396..54eaaf5153 100755
--- a/tests/qemu-iotests/198
+++ b/tests/qemu-iotests/198
@@ -92,12 +92,14 @@ $QEMU_IO --object $SECRET0 --object $SECRET1 -c "read -P 0x9 0 $size" --image-op
echo
echo "== checking image base =="
$QEMU_IMG info --image-opts $IMGSPECBASE | _filter_img_info --format-specific \
- | sed -e "/^disk size:/ D"
+ | sed -e "/^disk size:/ D" -e '/refcount bits:/ D' -e '/compat:/ D' \
+ -e '/lazy refcounts:/ D' -e '/corrupt:/ D'
echo
echo "== checking image layer =="
$QEMU_IMG info --image-opts $IMGSPECLAYER | _filter_img_info --format-specific \
- | sed -e "/^disk size:/ D"
+ | sed -e "/^disk size:/ D" -e '/refcount bits:/ D' -e '/compat:/ D' \
+ -e '/lazy refcounts:/ D' -e '/corrupt:/ D'
# success, all done
diff --git a/tests/qemu-iotests/198.out b/tests/qemu-iotests/198.out
index 2db565e16b..adb805cce9 100644
--- a/tests/qemu-iotests/198.out
+++ b/tests/qemu-iotests/198.out
@@ -36,9 +36,6 @@ image: json:{"encrypt.key-secret": "sec0", "driver": "IMGFMT", "file": {"driver"
file format: IMGFMT
virtual size: 16M (16777216 bytes)
Format specific information:
- compat: 1.1
- lazy refcounts: false
- refcount bits: 16
encrypt:
ivgen alg: plain64
hash alg: sha256
@@ -75,7 +72,6 @@ Format specific information:
key offset: 1810432
payload offset: 2068480
master key iters: 1024
- corrupt: false
== checking image layer ==
image: json:{"encrypt.key-secret": "sec1", "driver": "IMGFMT", "file": {"driver": "file", "filename": "TEST_DIR/t.IMGFMT"}}
@@ -83,9 +79,6 @@ file format: IMGFMT
virtual size: 16M (16777216 bytes)
backing file: TEST_DIR/t.IMGFMT.base
Format specific information:
- compat: 1.1
- lazy refcounts: false
- refcount bits: 16
encrypt:
ivgen alg: plain64
hash alg: sha256
@@ -122,5 +115,4 @@ Format specific information:
key offset: 1810432
payload offset: 2068480
master key iters: 1024
- corrupt: false
*** done
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 27/29] iotests: Make 059 pass on machines with little RAM
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (25 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 26/29] iotests: Filter compat-dependent info in 198 Kevin Wolf
@ 2018-01-23 14:01 ` Kevin Wolf
2018-01-23 14:02 ` [Qemu-devel] [PULL 28/29] iotests: Split 177 into two parts for compat=0.10 Kevin Wolf
` (2 subsequent siblings)
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:01 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171129192411.6637-1-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/059 | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tests/qemu-iotests/059 b/tests/qemu-iotests/059
index a1c34eeb7c..40f89eae18 100755
--- a/tests/qemu-iotests/059
+++ b/tests/qemu-iotests/059
@@ -152,7 +152,9 @@ done
echo
echo "=== Testing afl image with a very large capacity ==="
_use_sample_img afl9.vmdk.bz2
-_img_info
+# The sed makes this test pass on machines with little RAM
+# (and also with 32 bit builds)
+_img_info | sed -e 's/Cannot allocate memory/Invalid argument/'
_cleanup_test_img
# success, all done
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 28/29] iotests: Split 177 into two parts for compat=0.10
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (26 preceding siblings ...)
2018-01-23 14:01 ` [Qemu-devel] [PULL 27/29] iotests: Make 059 pass on machines with little RAM Kevin Wolf
@ 2018-01-23 14:02 ` Kevin Wolf
2018-01-23 14:02 ` [Qemu-devel] [PULL 29/29] iotests: Disable some tests " Kevin Wolf
2018-01-25 9:53 ` [Qemu-devel] [PULL 00/29] Block layer patches Peter Maydell
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:02 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Eric Blake <eblake@redhat.com>
When originally written, test 177 explicitly took care to run
with compat=0.10. Then I botched my own test in commit
81c219ac and f0a9c18f, by adding additional actions that require
v3 images. Split out the new code into a new v3-only test, 204,
and revert 177 back to its original state other than a new comment.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20180117165420.15946-2-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/177 | 20 +++-----
tests/qemu-iotests/177.out | 22 ++-------
tests/qemu-iotests/204 | 119 +++++++++++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/204.out | 63 ++++++++++++++++++++++++
tests/qemu-iotests/group | 1 +
5 files changed, 193 insertions(+), 32 deletions(-)
create mode 100755 tests/qemu-iotests/204
create mode 100644 tests/qemu-iotests/204.out
diff --git a/tests/qemu-iotests/177 b/tests/qemu-iotests/177
index 28990977f1..396986da89 100755
--- a/tests/qemu-iotests/177
+++ b/tests/qemu-iotests/177
@@ -2,7 +2,7 @@
#
# Test corner cases with unusual block geometries
#
-# Copyright (C) 2016-2017 Red Hat, Inc.
+# Copyright (C) 2016-2018 Red Hat, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -37,13 +37,15 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
. ./common.rc
. ./common.filter
+# This test is runnable under compat=0.10; see test 204 for additional
+# tests specific to compat=1.1.
+
_supported_fmt qcow2
_supported_proto file
CLUSTER_SIZE=1M
size=128M
options=driver=blkdebug,image.driver=qcow2
-nested_opts=image.file.driver=file,image.file.filename=$TEST_IMG
echo
echo "== setting up files =="
@@ -51,7 +53,7 @@ echo "== setting up files =="
TEST_IMG="$TEST_IMG.base" _make_test_img $size
$QEMU_IO -c "write -P 11 0 $size" "$TEST_IMG.base" | _filter_qemu_io
_make_test_img -b "$TEST_IMG.base"
-$QEMU_IO -c "write -P 22 0 110M" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "write -P 22 0 $size" "$TEST_IMG" | _filter_qemu_io
# Limited to 64k max-transfer
echo
@@ -82,13 +84,6 @@ $QEMU_IO -c "open -o $options,$limits blkdebug::$TEST_IMG" \
-c "discard 80000001 30M" | _filter_qemu_io
echo
-echo "== block status smaller than alignment =="
-limits=align=4k
-$QEMU_IO -c "open -o $options,$limits blkdebug::$TEST_IMG" \
- -c "alloc 1 1" -c "alloc 0x6dffff0 1000" -c "alloc 127m 5P" \
- -c map | _filter_qemu_io
-
-echo
echo "== verify image content =="
function verify_io()
@@ -110,13 +105,10 @@ function verify_io()
echo read -P 0 32M 32M
echo read -P 22 64M 13M
echo read -P $discarded 77M 29M
- echo read -P 22 106M 4M
- echo read -P 11 110M 18M
+ echo read -P 22 106M 22M
}
verify_io | $QEMU_IO -r "$TEST_IMG" | _filter_qemu_io
-$QEMU_IMG map --image-opts "$options,$nested_opts,align=4k" \
- | _filter_qemu_img_map
_check_test_img
diff --git a/tests/qemu-iotests/177.out b/tests/qemu-iotests/177.out
index f788b55e20..e887542678 100644
--- a/tests/qemu-iotests/177.out
+++ b/tests/qemu-iotests/177.out
@@ -5,8 +5,8 @@ Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728
wrote 134217728/134217728 bytes at offset 0
128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base
-wrote 115343360/115343360 bytes at offset 0
-110 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 134217728/134217728 bytes at offset 0
+128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
== constrained alignment and max-transfer ==
wrote 131072/131072 bytes at offset 1000
@@ -26,13 +26,6 @@ wrote 33554432/33554432 bytes at offset 33554432
discard 31457280/31457280 bytes at offset 80000001
30 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-== block status smaller than alignment ==
-1/1 bytes allocated at offset 1 bytes
-16/1000 bytes allocated at offset 110 MiB
-0/1048576 bytes allocated at offset 127 MiB
-110 MiB (0x6e00000) bytes allocated at offset 0 bytes (0x0)
-18 MiB (0x1200000) bytes not allocated at offset 110 MiB (0x6e00000)
-
== verify image content ==
read 1000/1000 bytes at offset 0
1000 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -50,14 +43,7 @@ read 13631488/13631488 bytes at offset 67108864
13 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
read 30408704/30408704 bytes at offset 80740352
29 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 4194304/4194304 bytes at offset 111149056
-4 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 18874368/18874368 bytes at offset 115343360
-18 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Offset Length File
-0 0x800000 TEST_DIR/t.IMGFMT
-0x900000 0x2400000 TEST_DIR/t.IMGFMT
-0x3c00000 0x1100000 TEST_DIR/t.IMGFMT
-0x6a00000 0x400000 TEST_DIR/t.IMGFMT
+read 23068672/23068672 bytes at offset 111149056
+22 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
No errors were found on the image.
*** done
diff --git a/tests/qemu-iotests/204 b/tests/qemu-iotests/204
new file mode 100755
index 0000000000..feb69d2ada
--- /dev/null
+++ b/tests/qemu-iotests/204
@@ -0,0 +1,119 @@
+#!/bin/bash
+#
+# Test corner cases with unusual block geometries
+#
+# Copyright (C) 2016-2018 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
+owner=eblake@redhat.com
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+status=1 # failure is the default!
+
+_cleanup()
+{
+ _cleanup_test_img
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+_supported_fmt qcow2
+_supported_proto file
+# This test assumes that discard leaves zero clusters; see test 177 for
+# other tests that also work in older images
+_unsupported_imgopts 'compat=0.10'
+
+CLUSTER_SIZE=1M
+size=128M
+options=driver=blkdebug,image.driver=qcow2
+nested_opts=image.file.driver=file,image.file.filename=$TEST_IMG
+
+echo
+echo "== setting up files =="
+
+TEST_IMG="$TEST_IMG.base" _make_test_img $size
+$QEMU_IO -c "write -P 11 0 $size" "$TEST_IMG.base" | _filter_qemu_io
+_make_test_img -b "$TEST_IMG.base"
+$QEMU_IO -c "write -P 22 0 110M" "$TEST_IMG" | _filter_qemu_io
+
+# Limited to 64k max-transfer
+echo
+echo "== constrained alignment and max-transfer =="
+limits=align=4k,max-transfer=64k
+$QEMU_IO -c "open -o $options,$limits blkdebug::$TEST_IMG" \
+ -c "write -P 33 1000 128k" -c "read -P 33 1000 128k" | _filter_qemu_io
+
+echo
+echo "== write zero with constrained max-transfer =="
+limits=align=512,max-transfer=64k,opt-write-zero=$CLUSTER_SIZE
+$QEMU_IO -c "open -o $options,$limits blkdebug::$TEST_IMG" \
+ -c "write -z 8003584 2093056" | _filter_qemu_io
+
+# non-power-of-2 write-zero/discard alignments
+echo
+echo "== non-power-of-2 write zeroes limits =="
+
+limits=align=512,opt-write-zero=15M,max-write-zero=15M,opt-discard=15M,max-discard=15M
+$QEMU_IO -c "open -o $options,$limits blkdebug::$TEST_IMG" \
+ -c "write -z 32M 32M" | _filter_qemu_io
+
+echo
+echo "== non-power-of-2 discard limits =="
+
+limits=align=512,opt-write-zero=15M,max-write-zero=15M,opt-discard=15M,max-discard=15M
+$QEMU_IO -c "open -o $options,$limits blkdebug::$TEST_IMG" \
+ -c "discard 80000001 30M" | _filter_qemu_io
+
+echo
+echo "== block status smaller than alignment =="
+limits=align=4k
+$QEMU_IO -c "open -o $options,$limits blkdebug::$TEST_IMG" \
+ -c "alloc 1 1" -c "alloc 0x6dffff0 1000" -c "alloc 127m 5P" \
+ -c map | _filter_qemu_io
+
+echo
+echo "== verify image content =="
+
+function verify_io()
+{
+ echo read -P 22 0 1000
+ echo read -P 33 1000 128k
+ echo read -P 22 132072 7871512
+ echo read -P 0 8003584 2093056
+ echo read -P 22 10096640 23457792
+ echo read -P 0 32M 32M
+ echo read -P 22 64M 13M
+ echo read -P 0 77M 29M
+ echo read -P 22 106M 4M
+ echo read -P 11 110M 18M
+}
+
+verify_io | $QEMU_IO -r "$TEST_IMG" | _filter_qemu_io
+$QEMU_IMG map --image-opts "$options,$nested_opts,align=4k" \
+ | _filter_qemu_img_map
+
+_check_test_img
+
+# success, all done
+echo "*** done"
+status=0
diff --git a/tests/qemu-iotests/204.out b/tests/qemu-iotests/204.out
new file mode 100644
index 0000000000..f3a10fbe90
--- /dev/null
+++ b/tests/qemu-iotests/204.out
@@ -0,0 +1,63 @@
+QA output created by 204
+
+== setting up files ==
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728
+wrote 134217728/134217728 bytes at offset 0
+128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base
+wrote 115343360/115343360 bytes at offset 0
+110 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+== constrained alignment and max-transfer ==
+wrote 131072/131072 bytes at offset 1000
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 131072/131072 bytes at offset 1000
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+== write zero with constrained max-transfer ==
+wrote 2093056/2093056 bytes at offset 8003584
+1.996 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+== non-power-of-2 write zeroes limits ==
+wrote 33554432/33554432 bytes at offset 33554432
+32 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+== non-power-of-2 discard limits ==
+discard 31457280/31457280 bytes at offset 80000001
+30 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+== block status smaller than alignment ==
+1/1 bytes allocated at offset 1 bytes
+16/1000 bytes allocated at offset 110 MiB
+0/1048576 bytes allocated at offset 127 MiB
+110 MiB (0x6e00000) bytes allocated at offset 0 bytes (0x0)
+18 MiB (0x1200000) bytes not allocated at offset 110 MiB (0x6e00000)
+
+== verify image content ==
+read 1000/1000 bytes at offset 0
+1000 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 131072/131072 bytes at offset 1000
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 7871512/7871512 bytes at offset 132072
+7.507 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 2093056/2093056 bytes at offset 8003584
+1.996 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 23457792/23457792 bytes at offset 10096640
+22.371 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 33554432/33554432 bytes at offset 33554432
+32 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 13631488/13631488 bytes at offset 67108864
+13 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 30408704/30408704 bytes at offset 80740352
+29 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 4194304/4194304 bytes at offset 111149056
+4 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 18874368/18874368 bytes at offset 115343360
+18 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Offset Length File
+0 0x800000 TEST_DIR/t.IMGFMT
+0x900000 0x2400000 TEST_DIR/t.IMGFMT
+0x3c00000 0x1100000 TEST_DIR/t.IMGFMT
+0x6a00000 0x400000 TEST_DIR/t.IMGFMT
+No errors were found on the image.
+*** done
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index c4703cd782..8fc4f62cca 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -200,3 +200,4 @@
201 rw auto migration
202 rw auto quick
203 rw auto
+204 rw auto quick
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [Qemu-devel] [PULL 29/29] iotests: Disable some tests for compat=0.10
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (27 preceding siblings ...)
2018-01-23 14:02 ` [Qemu-devel] [PULL 28/29] iotests: Split 177 into two parts for compat=0.10 Kevin Wolf
@ 2018-01-23 14:02 ` Kevin Wolf
2018-01-25 9:53 ` [Qemu-devel] [PULL 00/29] Block layer patches Peter Maydell
29 siblings, 0 replies; 34+ messages in thread
From: Kevin Wolf @ 2018-01-23 14:02 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel
From: Max Reitz <mreitz@redhat.com>
Tests 080, 130, 137, and 176 simply do not work with compat=0.10 for the
reasons stated there.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20171123020832.8165-10-mreitz@redhat.com>
[eblake: fix 177 in a separate commit]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20180117165420.15946-3-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/080 | 5 +++--
tests/qemu-iotests/130 | 2 ++
tests/qemu-iotests/137 | 2 ++
tests/qemu-iotests/176 | 2 ++
4 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/tests/qemu-iotests/080 b/tests/qemu-iotests/080
index 55044c700b..1c2bd85742 100755
--- a/tests/qemu-iotests/080
+++ b/tests/qemu-iotests/080
@@ -41,8 +41,9 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto file
_supported_os Linux
-# Internal snapshots are (currently) impossible with refcount_bits=1
-_unsupported_imgopts 'refcount_bits=1[^0-9]'
+# - Internal snapshots are (currently) impossible with refcount_bits=1
+# - This is generally a test for compat=1.1 images
+_unsupported_imgopts 'refcount_bits=1[^0-9]' 'compat=0.10'
header_size=104
diff --git a/tests/qemu-iotests/130 b/tests/qemu-iotests/130
index e7e43de6d6..2c4b94da1b 100755
--- a/tests/qemu-iotests/130
+++ b/tests/qemu-iotests/130
@@ -45,6 +45,8 @@ _supported_fmt qcow2
_supported_proto generic
_unsupported_proto vxhs
_supported_os Linux
+# We are going to use lazy-refcounts
+_unsupported_imgopts 'compat=0.10'
qemu_comm_method="monitor"
diff --git a/tests/qemu-iotests/137 b/tests/qemu-iotests/137
index eb91e517d7..5a01250005 100755
--- a/tests/qemu-iotests/137
+++ b/tests/qemu-iotests/137
@@ -41,6 +41,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto file
_supported_os Linux
+# We are going to use lazy-refcounts
+_unsupported_imgopts 'compat=0.10'
_make_test_img 64M
diff --git a/tests/qemu-iotests/176 b/tests/qemu-iotests/176
index b8dc17c592..d38b3aeb91 100755
--- a/tests/qemu-iotests/176
+++ b/tests/qemu-iotests/176
@@ -48,6 +48,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto file
_supported_os Linux
+# Persistent dirty bitmaps require compat=1.1
+_unsupported_imgopts 'compat=0.10'
function run_qemu()
{
--
2.13.6
^ permalink raw reply related [flat|nested] 34+ messages in thread* Re: [Qemu-devel] [PULL 00/29] Block layer patches
2018-01-23 14:01 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
` (28 preceding siblings ...)
2018-01-23 14:02 ` [Qemu-devel] [PULL 29/29] iotests: Disable some tests " Kevin Wolf
@ 2018-01-25 9:53 ` Peter Maydell
29 siblings, 0 replies; 34+ messages in thread
From: Peter Maydell @ 2018-01-25 9:53 UTC (permalink / raw)
To: Kevin Wolf; +Cc: Qemu-block, QEMU Developers
On 23 January 2018 at 14:01, Kevin Wolf <kwolf@redhat.com> wrote:
> The following changes since commit ee86981bda9ecd40c8daf81b7307b1d2aff68174:
>
> migration: Revert postcopy-blocktime commit set (2018-01-23 10:08:05 +0000)
>
> are available in the git repository at:
>
> git://repo.or.cz/qemu/kevin.git tags/for-upstream
>
> for you to fetch changes up to 8c0c5e636e6b11eaf0556be31fceb68e0baff310:
>
> Merge remote-tracking branch 'mreitz/tags/pull-block-2018-01-23' into queue-block (2018-01-23 12:40:46 +0100)
>
> ----------------------------------------------------------------
> Block layer patches
>
Applied, thanks.
-- PMM
^ permalink raw reply [flat|nested] 34+ messages in thread