From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v3 07/45] target/hppa: Implement the system mask instructions
Date: Wed, 24 Jan 2018 15:25:47 -0800 [thread overview]
Message-ID: <20180124232625.30105-8-richard.henderson@linaro.org> (raw)
In-Reply-To: <20180124232625.30105-1-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/hppa/helper.h | 4 +++
target/hppa/op_helper.c | 14 ++++++++
target/hppa/translate.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++++-
3 files changed, 113 insertions(+), 1 deletion(-)
diff --git a/target/hppa/helper.h b/target/hppa/helper.h
index c720de523b..254a4da133 100644
--- a/target/hppa/helper.h
+++ b/target/hppa/helper.h
@@ -76,3 +76,7 @@ DEF_HELPER_FLAGS_4(fmpyfadd_s, TCG_CALL_NO_RWG, i32, env, i32, i32, i32)
DEF_HELPER_FLAGS_4(fmpynfadd_s, TCG_CALL_NO_RWG, i32, env, i32, i32, i32)
DEF_HELPER_FLAGS_4(fmpyfadd_d, TCG_CALL_NO_RWG, i64, env, i64, i64, i64)
DEF_HELPER_FLAGS_4(fmpynfadd_d, TCG_CALL_NO_RWG, i64, env, i64, i64, i64)
+
+#ifndef CONFIG_USER_ONLY
+DEF_HELPER_FLAGS_2(swap_system_mask, TCG_CALL_NO_RWG, tr, env, tr)
+#endif
diff --git a/target/hppa/op_helper.c b/target/hppa/op_helper.c
index 479bfc0fdf..1c3e043cc0 100644
--- a/target/hppa/op_helper.c
+++ b/target/hppa/op_helper.c
@@ -601,3 +601,17 @@ float64 HELPER(fmpynfadd_d)(CPUHPPAState *env, float64 a, float64 b, float64 c)
update_fr0_op(env, GETPC());
return ret;
}
+
+#ifndef CONFIG_USER_ONLY
+target_ureg HELPER(swap_system_mask)(CPUHPPAState *env, target_ureg nsm)
+{
+ target_ulong psw = env->psw;
+ /* ??? On second reading this condition simply seems
+ to be undefined rather than a diagnosed trap. */
+ if (nsm & ~psw & PSW_Q) {
+ dynexcp(env, EXCP_ILL, GETPC());
+ }
+ env->psw = (psw & ~PSW_SM) | (nsm & PSW_SM);
+ return psw & PSW_SM;
+}
+#endif
diff --git a/target/hppa/translate.c b/target/hppa/translate.c
index 33605a2d15..088031e7f3 100644
--- a/target/hppa/translate.c
+++ b/target/hppa/translate.c
@@ -299,6 +299,10 @@ typedef struct DisasContext {
updated the iaq for the next instruction to be executed. */
#define DISAS_IAQ_N_STALE DISAS_TARGET_1
+/* Similarly, but we want to return to the main loop immediately
+ to recognize unmasked interrupts. */
+#define DISAS_IAQ_N_STALE_EXIT DISAS_TARGET_2
+
typedef struct DisasInsn {
uint32_t insn, mask;
DisasJumpType (*trans)(DisasContext *ctx, uint32_t insn,
@@ -697,6 +701,14 @@ static DisasJumpType gen_illegal(DisasContext *ctx)
return nullify_end(ctx, gen_excp(ctx, EXCP_ILL));
}
+#define CHECK_MOST_PRIVILEGED(EXCP) \
+ do { \
+ if (ctx->privilege != 0) { \
+ nullify_over(ctx); \
+ return nullify_end(ctx, gen_excp(ctx, EXCP)); \
+ } \
+ } while (0)
+
static bool use_goto_tb(DisasContext *ctx, target_ureg dest)
{
/* Suppress goto_tb in the case of single-steping and IO. */
@@ -1982,6 +1994,79 @@ static DisasJumpType trans_ldsid(DisasContext *ctx, uint32_t insn,
return DISAS_NEXT;
}
+#ifndef CONFIG_USER_ONLY
+/* Note that ssm/rsm instructions number PSW_W and PSW_E differently. */
+static target_ureg extract_sm_imm(uint32_t insn)
+{
+ target_ureg val = extract32(insn, 16, 10);
+
+ if (val & PSW_SM_E) {
+ val = (val & ~PSW_SM_E) | PSW_E;
+ }
+ if (val & PSW_SM_W) {
+ val = (val & ~PSW_SM_W) | PSW_W;
+ }
+ return val;
+}
+
+static DisasJumpType trans_rsm(DisasContext *ctx, uint32_t insn,
+ const DisasInsn *di)
+{
+ unsigned rt = extract32(insn, 0, 5);
+ target_ureg sm = extract_sm_imm(insn);
+ TCGv_reg tmp;
+
+ CHECK_MOST_PRIVILEGED(EXCP_PRIV_OPR);
+ nullify_over(ctx);
+
+ tmp = get_temp(ctx);
+ tcg_gen_ld_reg(tmp, cpu_env, offsetof(CPUHPPAState, psw));
+ tcg_gen_andi_reg(tmp, tmp, ~sm);
+ gen_helper_swap_system_mask(tmp, cpu_env, tmp);
+ save_gpr(ctx, rt, tmp);
+
+ /* Exit the TB to recognize new interrupts, e.g. PSW_M. */
+ return nullify_end(ctx, DISAS_IAQ_N_STALE_EXIT);
+}
+
+static DisasJumpType trans_ssm(DisasContext *ctx, uint32_t insn,
+ const DisasInsn *di)
+{
+ unsigned rt = extract32(insn, 0, 5);
+ target_ureg sm = extract_sm_imm(insn);
+ TCGv_reg tmp;
+
+ CHECK_MOST_PRIVILEGED(EXCP_PRIV_OPR);
+ nullify_over(ctx);
+
+ tmp = get_temp(ctx);
+ tcg_gen_ld_reg(tmp, cpu_env, offsetof(CPUHPPAState, psw));
+ tcg_gen_ori_reg(tmp, tmp, sm);
+ gen_helper_swap_system_mask(tmp, cpu_env, tmp);
+ save_gpr(ctx, rt, tmp);
+
+ /* Exit the TB to recognize new interrupts, e.g. PSW_I. */
+ return nullify_end(ctx, DISAS_IAQ_N_STALE_EXIT);
+}
+
+static DisasJumpType trans_mtsm(DisasContext *ctx, uint32_t insn,
+ const DisasInsn *di)
+{
+ unsigned rr = extract32(insn, 16, 5);
+ TCGv_reg tmp, reg;
+
+ CHECK_MOST_PRIVILEGED(EXCP_PRIV_OPR);
+ nullify_over(ctx);
+
+ reg = load_gpr(ctx, rr);
+ tmp = get_temp(ctx);
+ gen_helper_swap_system_mask(tmp, cpu_env, reg);
+
+ /* Exit the TB to recognize new interrupts. */
+ return nullify_end(ctx, DISAS_IAQ_N_STALE_EXIT);
+}
+#endif /* !CONFIG_USER_ONLY */
+
static const DisasInsn table_system[] = {
{ 0x00000000u, 0xfc001fe0u, trans_break },
/* We don't implement space register, so MTSP is a nop. */
@@ -1993,6 +2078,11 @@ static const DisasInsn table_system[] = {
{ 0x000008a0u, 0xfc1fffe0u, trans_mfctl },
{ 0x00000400u, 0xffffffffu, trans_sync },
{ 0x000010a0u, 0xfc1f3fe0u, trans_ldsid },
+#ifndef CONFIG_USER_ONLY
+ { 0x00000e60u, 0xfc00ffe0u, trans_rsm },
+ { 0x00000d60u, 0xfc00ffe0u, trans_ssm },
+ { 0x00001860u, 0xffe0ffffu, trans_mtsm },
+#endif
};
static DisasJumpType trans_base_idx_mod(DisasContext *ctx, uint32_t insn,
@@ -4111,12 +4201,14 @@ static void hppa_tr_translate_insn(DisasContextBase *dcbase, CPUState *cs)
static void hppa_tr_tb_stop(DisasContextBase *dcbase, CPUState *cs)
{
DisasContext *ctx = container_of(dcbase, DisasContext, base);
+ DisasJumpType is_jmp = ctx->base.is_jmp;
- switch (ctx->base.is_jmp) {
+ switch (is_jmp) {
case DISAS_NORETURN:
break;
case DISAS_TOO_MANY:
case DISAS_IAQ_N_STALE:
+ case DISAS_IAQ_N_STALE_EXIT:
copy_iaoq_entry(cpu_iaoq_f, ctx->iaoq_f, cpu_iaoq_f);
copy_iaoq_entry(cpu_iaoq_b, ctx->iaoq_b, cpu_iaoq_b);
nullify_save(ctx);
@@ -4124,6 +4216,8 @@ static void hppa_tr_tb_stop(DisasContextBase *dcbase, CPUState *cs)
case DISAS_IAQ_N_UPDATED:
if (ctx->base.singlestep_enabled) {
gen_excp_1(EXCP_DEBUG);
+ } else if (is_jmp == DISAS_IAQ_N_STALE_EXIT) {
+ tcg_gen_exit_tb(0);
} else {
tcg_gen_lookup_and_goto_ptr();
}
--
2.14.3
next prev parent reply other threads:[~2018-01-24 23:26 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-24 23:25 [Qemu-devel] [PATCH v3 00/45] hppa-softmmu Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 01/45] target/hppa: Skeleton support for hppa-softmmu Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 02/45] target/hppa: Define the rest of the PSW Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 03/45] target/hppa: Disable gateway page emulation for system mode Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 04/45] target/hppa: Define hardware exception types Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 05/45] target/hppa: Split address size from register size Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 06/45] target/hppa: Implement mmu_idx from IA privilege level Richard Henderson
2018-01-24 23:25 ` Richard Henderson [this message]
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 08/45] target/hppa: Add space registers Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 09/45] target/hppa: Add control registers Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 10/45] target/hppa: Adjust insn mask for mfctl, w Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 11/45] target/hppa: Implement rfi Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 12/45] target/hppa: Fill in hppa_cpu_do_interrupt/hppa_cpu_exec_interrupt Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 13/45] target/hppa: Implement unaligned access trap Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 14/45] target/hppa: Use space registers in data operations Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 15/45] target/hppa: Avoid privilege level decrease during branches Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 16/45] target/hppa: Implement IASQ Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 17/45] target/hppa: Implement tlb_fill Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 18/45] target/hppa: Implement external interrupts Richard Henderson
2018-01-24 23:25 ` [Qemu-devel] [PATCH v3 19/45] target/hppa: Implement the interval timer Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 20/45] target/hppa: Log unimplemented instructions Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 21/45] target/hppa: Implement I*TLBA and I*TLBP insns Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 22/45] target/hppa: Implement P*TLB and P*TLBE insns Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 23/45] target/hppa: Implement LDWA Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 24/45] target/hppa: Implement LPA Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 25/45] target/hppa: Implement LCI Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 26/45] target/hppa: Implement SYNCDMA insn Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 27/45] target/hppa: Implement halt and reset instructions Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 28/45] target/hppa: Optimize for flat addressing space Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 29/45] target/hppa: Add system registers to gdbstub Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 30/45] target/hppa: Add migration for the cpu Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 31/45] target/hppa: Implement B,GATE insn Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 32/45] target/hppa: Only use EXCP_DTLB_MISS Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 33/45] qom: Add MMU_DEBUG_LOAD Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 34/45] target/hppa: Use MMU_DEBUG_LOAD when reloading for CR[IIR] Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 35/45] target/hppa: Increase number of temp regs Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 36/45] target/hppa: Fix comment Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 37/45] target/hppa: Implement LDSID for system mode Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 38/45] target/hppa: Implement a pause instruction Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 39/45] target/hppa: Implement STWA Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 40/45] target/hppa: Enable MTTCG Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 41/45] hw/hppa: Implement DINO system board Richard Henderson
2018-01-25 11:22 ` Philippe Mathieu-Daudé
2018-01-27 13:22 ` Helge Deller
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 42/45] pc-bios: Add hppa-firmware.img and git submodule Richard Henderson
2018-02-04 22:40 ` Philippe Mathieu-Daudé
2018-02-06 7:35 ` Helge Deller
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 43/45] hw/hppa: Add MAINTAINERS entry Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 44/45] target/hppa: Fix 32-bit operand masks for 0E FCVT Richard Henderson
2018-01-24 23:26 ` [Qemu-devel] [PATCH v3 45/45] target/hppa: Implement PROBE for system mode Richard Henderson
2018-01-25 0:11 ` [Qemu-devel] [PATCH v3 00/45] hppa-softmmu no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180124232625.30105-8-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).