qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, Helge Deller <deller@gmx.de>
Subject: [Qemu-devel] [PULL v4 01/43] target/hppa: Skeleton support for hppa-softmmu
Date: Sun, 28 Jan 2018 15:14:46 -0800	[thread overview]
Message-ID: <20180128231528.22719-2-richard.henderson@linaro.org> (raw)
In-Reply-To: <20180128231528.22719-1-richard.henderson@linaro.org>

From: Helge Deller <deller@gmx.de>

With the addition of default-configs/hppa-softmmu.mak, this
will compile.  It is not enabled with this patch, however.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 include/sysemu/arch_init.h |  1 +
 target/hppa/cpu.h          |  1 +
 arch_init.c                |  2 ++
 hw/hppa/machine.c          | 38 ++++++++++++++++++++++++++++++++
 target/hppa/cpu.c          |  5 +++++
 target/hppa/helper.c       | 10 ---------
 target/hppa/mem_helper.c   | 54 ++++++++++++++++++++++++++++++++++++++++++++++
 target/hppa/op_helper.c    | 13 +++++++++--
 hw/hppa/Makefile.objs      |  1 +
 target/hppa/Makefile.objs  |  2 +-
 10 files changed, 114 insertions(+), 13 deletions(-)
 create mode 100644 hw/hppa/machine.c
 create mode 100644 target/hppa/mem_helper.c
 create mode 100644 hw/hppa/Makefile.objs

diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h
index 8751c468ed..f999bfd3be 100644
--- a/include/sysemu/arch_init.h
+++ b/include/sysemu/arch_init.h
@@ -24,6 +24,7 @@ enum {
     QEMU_ARCH_MOXIE = (1 << 15),
     QEMU_ARCH_TRICORE = (1 << 16),
     QEMU_ARCH_NIOS2 = (1 << 17),
+    QEMU_ARCH_HPPA = (1 << 18),
 };
 
 extern const uint32_t arch_type;
diff --git a/target/hppa/cpu.h b/target/hppa/cpu.h
index 1a35eae1fa..3d170c3cf7 100644
--- a/target/hppa/cpu.h
+++ b/target/hppa/cpu.h
@@ -134,6 +134,7 @@ void cpu_hppa_loaded_fr0(CPUHPPAState *env);
 int cpu_hppa_signal_handler(int host_signum, void *pinfo, void *puc);
 int hppa_cpu_handle_mmu_fault(CPUState *cpu, vaddr address, int size,
                               int rw, int midx);
+hwaddr hppa_cpu_get_phys_page_debug(CPUState *cs, vaddr addr);
 int hppa_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
 int hppa_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
 void hppa_cpu_do_interrupt(CPUState *cpu);
diff --git a/arch_init.c b/arch_init.c
index a0b8ed6167..4c36f2b076 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -53,6 +53,8 @@ int graphic_depth = 32;
 #define QEMU_ARCH QEMU_ARCH_CRIS
 #elif defined(TARGET_I386)
 #define QEMU_ARCH QEMU_ARCH_I386
+#elif defined(TARGET_HPPA)
+#define QEMU_ARCH QEMU_ARCH_HPPA
 #elif defined(TARGET_M68K)
 #define QEMU_ARCH QEMU_ARCH_M68K
 #elif defined(TARGET_LM32)
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
new file mode 100644
index 0000000000..79958da18f
--- /dev/null
+++ b/hw/hppa/machine.c
@@ -0,0 +1,38 @@
+/*
+ * QEMU HPPA hardware system emulator.
+ * Copyright 2018 Helge Deller <deller@gmx.de>
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "cpu.h"
+#include "hw/hw.h"
+#include "elf.h"
+#include "hw/loader.h"
+#include "hw/boards.h"
+#include "qemu/error-report.h"
+#include "sysemu/sysemu.h"
+#include "hw/timer/mc146818rtc.h"
+#include "hw/ide.h"
+#include "hw/timer/i8254.h"
+#include "hw/char/serial.h"
+#include "qemu/cutils.h"
+#include "qapi/error.h"
+
+
+static void machine_hppa_init(MachineState *machine)
+{
+}
+
+static void machine_hppa_machine_init(MachineClass *mc)
+{
+    mc->desc = "HPPA generic machine";
+    mc->init = machine_hppa_init;
+    mc->block_default_type = IF_SCSI;
+    mc->max_cpus = 1;
+    mc->is_default = 1;
+    mc->default_ram_size = 512 * M_BYTE;
+    mc->default_boot_order = "cd";
+}
+
+DEFINE_MACHINE("hppa", machine_hppa_machine_init)
diff --git a/target/hppa/cpu.c b/target/hppa/cpu.c
index 9e7b0d4ccb..f6d92de972 100644
--- a/target/hppa/cpu.c
+++ b/target/hppa/cpu.c
@@ -132,7 +132,12 @@ static void hppa_cpu_class_init(ObjectClass *oc, void *data)
     cc->synchronize_from_tb = hppa_cpu_synchronize_from_tb;
     cc->gdb_read_register = hppa_cpu_gdb_read_register;
     cc->gdb_write_register = hppa_cpu_gdb_write_register;
+#ifdef CONFIG_USER_ONLY
     cc->handle_mmu_fault = hppa_cpu_handle_mmu_fault;
+#else
+    cc->get_phys_page_debug = hppa_cpu_get_phys_page_debug;
+#endif
+
     cc->disas_set_info = hppa_cpu_disas_set_info;
     cc->tcg_initialize = hppa_translate_init;
 
diff --git a/target/hppa/helper.c b/target/hppa/helper.c
index 23f7af7018..d6d6f06cb0 100644
--- a/target/hppa/helper.c
+++ b/target/hppa/helper.c
@@ -65,16 +65,6 @@ void cpu_hppa_put_psw(CPUHPPAState *env, target_ulong psw)
     env->psw_cb = cb;
 }
 
-int hppa_cpu_handle_mmu_fault(CPUState *cs, vaddr address, int size,
-                              int rw, int mmu_idx)
-{
-    HPPACPU *cpu = HPPA_CPU(cs);
-
-    cs->exception_index = EXCP_SIGSEGV;
-    cpu->env.ior = address;
-    return 1;
-}
-
 void hppa_cpu_do_interrupt(CPUState *cs)
 {
     HPPACPU *cpu = HPPA_CPU(cs);
diff --git a/target/hppa/mem_helper.c b/target/hppa/mem_helper.c
new file mode 100644
index 0000000000..a3e576f119
--- /dev/null
+++ b/target/hppa/mem_helper.c
@@ -0,0 +1,54 @@
+/*
+ *  HPPA memory access helper routines
+ *
+ *  Copyright (c) 2017 Helge Deller
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "cpu.h"
+#include "exec/exec-all.h"
+#include "exec/helper-proto.h"
+#include "qom/cpu.h"
+
+#ifdef CONFIG_USER_ONLY
+int hppa_cpu_handle_mmu_fault(CPUState *cs, vaddr address,
+                              int size, int rw, int mmu_idx)
+{
+    HPPACPU *cpu = HPPA_CPU(cs);
+
+    cs->exception_index = EXCP_SIGSEGV;
+    cpu->env.ior = address;
+    return 1;
+}
+#else
+hwaddr hppa_cpu_get_phys_page_debug(CPUState *cs, vaddr addr)
+{
+    /* Stub */
+    return addr;
+}
+
+void tlb_fill(CPUState *cs, target_ulong addr, MMUAccessType type,
+              int mmu_idx, uintptr_t retaddr)
+{
+    /* Stub */
+    int prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
+    hwaddr phys = addr;
+
+    /* Success!  Store the translation into the QEMU TLB.  */
+    tlb_set_page(cs, addr & TARGET_PAGE_MASK, phys & TARGET_PAGE_MASK,
+                 prot, mmu_idx, TARGET_PAGE_SIZE);
+}
+#endif /* CONFIG_USER_ONLY */
diff --git a/target/hppa/op_helper.c b/target/hppa/op_helper.c
index fdbf64ae3c..9076ee998d 100644
--- a/target/hppa/op_helper.c
+++ b/target/hppa/op_helper.c
@@ -58,9 +58,9 @@ void HELPER(tcond)(CPUHPPAState *env, target_ulong cond)
 static void atomic_store_3(CPUHPPAState *env, target_ulong addr, uint32_t val,
                            uint32_t mask, uintptr_t ra)
 {
+#ifdef CONFIG_USER_ONLY
     uint32_t old, new, cmp;
 
-#ifdef CONFIG_USER_ONLY
     uint32_t *haddr = g2h(addr - 1);
     old = *haddr;
     while (1) {
@@ -72,7 +72,8 @@ static void atomic_store_3(CPUHPPAState *env, target_ulong addr, uint32_t val,
         old = cmp;
     }
 #else
-#error "Not implemented."
+    /* FIXME -- we can do better.  */
+    cpu_loop_exit_atomic(ENV_GET_CPU(env), ra);
 #endif
 }
 
@@ -158,12 +159,20 @@ void HELPER(stby_e_parallel)(CPUHPPAState *env, target_ulong addr,
 
 target_ulong HELPER(probe_r)(target_ulong addr)
 {
+#ifdef CONFIG_USER_ONLY
     return page_check_range(addr, 1, PAGE_READ);
+#else
+    return 1; /* FIXME */
+#endif
 }
 
 target_ulong HELPER(probe_w)(target_ulong addr)
 {
+#ifdef CONFIG_USER_ONLY
     return page_check_range(addr, 1, PAGE_WRITE);
+#else
+    return 1; /* FIXME */
+#endif
 }
 
 void HELPER(loaded_fr0)(CPUHPPAState *env)
diff --git a/hw/hppa/Makefile.objs b/hw/hppa/Makefile.objs
new file mode 100644
index 0000000000..46b2ae18de
--- /dev/null
+++ b/hw/hppa/Makefile.objs
@@ -0,0 +1 @@
+obj-y += machine.o
diff --git a/target/hppa/Makefile.objs b/target/hppa/Makefile.objs
index 263446fa0b..d89285307b 100644
--- a/target/hppa/Makefile.objs
+++ b/target/hppa/Makefile.objs
@@ -1 +1 @@
-obj-y += translate.o helper.o cpu.o op_helper.o gdbstub.o
+obj-y += translate.o helper.o cpu.o op_helper.o gdbstub.o mem_helper.o
-- 
2.14.3

  reply	other threads:[~2018-01-28 23:15 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-28 23:14 [Qemu-devel] [PULL v4 00/43] hppa-softmmu Richard Henderson
2018-01-28 23:14 ` Richard Henderson [this message]
2018-01-28 23:14 ` [Qemu-devel] [PULL v4 02/43] target/hppa: Define the rest of the PSW Richard Henderson
2018-01-28 23:14 ` [Qemu-devel] [PULL v4 03/43] target/hppa: Disable gateway page emulation for system mode Richard Henderson
2018-01-28 23:14 ` [Qemu-devel] [PULL v4 04/43] target/hppa: Define hardware exception types Richard Henderson
2018-01-28 23:14 ` [Qemu-devel] [PULL v4 05/43] target/hppa: Split address size from register size Richard Henderson
2018-01-28 23:14 ` [Qemu-devel] [PULL v4 06/43] target/hppa: Implement mmu_idx from IA privilege level Richard Henderson
2018-01-28 23:14 ` [Qemu-devel] [PULL v4 07/43] target/hppa: Implement the system mask instructions Richard Henderson
2018-01-28 23:14 ` [Qemu-devel] [PULL v4 08/43] target/hppa: Add space registers Richard Henderson
2018-01-28 23:14 ` [Qemu-devel] [PULL v4 09/43] target/hppa: Add control registers Richard Henderson
2018-01-28 23:14 ` [Qemu-devel] [PULL v4 10/43] target/hppa: Adjust insn mask for mfctl, w Richard Henderson
2018-01-28 23:14 ` [Qemu-devel] [PULL v4 11/43] target/hppa: Implement rfi Richard Henderson
2018-01-28 23:14 ` [Qemu-devel] [PULL v4 12/43] target/hppa: Fill in hppa_cpu_do_interrupt/hppa_cpu_exec_interrupt Richard Henderson
2018-01-28 23:14 ` [Qemu-devel] [PULL v4 13/43] target/hppa: Implement unaligned access trap Richard Henderson
2018-01-28 23:14 ` [Qemu-devel] [PULL v4 14/43] target/hppa: Use space registers in data operations Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 15/43] target/hppa: Avoid privilege level decrease during branches Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 16/43] target/hppa: Implement IASQ Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 17/43] target/hppa: Implement tlb_fill Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 18/43] target/hppa: Implement external interrupts Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 19/43] target/hppa: Implement the interval timer Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 20/43] target/hppa: Log unimplemented instructions Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 21/43] target/hppa: Implement I*TLBA and I*TLBP insns Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 22/43] target/hppa: Implement P*TLB and P*TLBE insns Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 23/43] target/hppa: Implement LDWA Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 24/43] target/hppa: Implement LPA Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 25/43] target/hppa: Implement LCI Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 26/43] target/hppa: Implement SYNCDMA insn Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 27/43] target/hppa: Implement halt and reset instructions Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 28/43] target/hppa: Optimize for flat addressing space Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 29/43] target/hppa: Add system registers to gdbstub Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 30/43] target/hppa: Add migration for the cpu Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 31/43] target/hppa: Implement B,GATE insn Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 32/43] target/hppa: Only use EXCP_DTLB_MISS Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 33/43] target/hppa: Increase number of temp regs Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 34/43] target/hppa: Fix comment Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 35/43] target/hppa: Implement LDSID for system mode Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 36/43] target/hppa: Implement a pause instruction Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 37/43] target/hppa: Implement STWA Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 38/43] target/hppa: Enable MTTCG Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 39/43] hw/hppa: Implement DINO system board Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 40/43] pc-bios: Add hppa-firmware.img and git submodule Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 41/43] hw/hppa: Add MAINTAINERS entry Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 42/43] target/hppa: Fix 32-bit operand masks for 0E FCVT Richard Henderson
2018-01-28 23:15 ` [Qemu-devel] [PULL v4 43/43] target/hppa: Implement PROBE for system mode Richard Henderson
2018-01-28 23:59 ` [Qemu-devel] [PULL v4 00/43] hppa-softmmu no-reply
2018-01-29 13:12 ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180128231528.22719-2-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=deller@gmx.de \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).