* [Qemu-devel] [PATCH v3 0/2] s390x: support zpci in tcg
@ 2018-02-01 17:19 Cornelia Huck
2018-02-01 17:19 ` [Qemu-devel] [PATCH v3 1/2] s390x/tcg: wire up pci instructions Cornelia Huck
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Cornelia Huck @ 2018-02-01 17:19 UTC (permalink / raw)
To: qemu-s390x, qemu-devel; +Cc: rth, agraf, david, Cornelia Huck
More cleanup, as suggested by David, and also a fixed-up SIC. We can
now turn on ais as well and run with a pre-4.15 kernel and pci devices.
Branch at git://github.com/cohuck/qemu pci-tcg updated.
Changes v2->v3:
- SIC should depend on AIS, which is now supported for tcg as well
- fixup calling css_do_sic()
- no need to check return codes for the pci instruction handlers
- minor cleanup
Cornelia Huck (2):
s390x/tcg: wire up pci instructions
s390x/cpumodel: allow zpci features in qemu model
target/s390x/cpu_models.c | 6 +++
target/s390x/gen-features.c | 6 ++-
target/s390x/helper.h | 9 ++++
target/s390x/insn-data.def | 13 ++++++
target/s390x/misc_helper.c | 89 ++++++++++++++++++++++++++++++++++++++
target/s390x/translate.c | 102 ++++++++++++++++++++++++++++++++++++++++++++
6 files changed, 224 insertions(+), 1 deletion(-)
--
2.13.6
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Qemu-devel] [PATCH v3 1/2] s390x/tcg: wire up pci instructions
2018-02-01 17:19 [Qemu-devel] [PATCH v3 0/2] s390x: support zpci in tcg Cornelia Huck
@ 2018-02-01 17:19 ` Cornelia Huck
2018-02-01 17:21 ` David Hildenbrand
2018-02-01 17:19 ` [Qemu-devel] [PATCH v3 2/2] s390x/cpumodel: allow zpci features in qemu model Cornelia Huck
2018-02-05 14:35 ` [Qemu-devel] [PATCH v3 0/2] s390x: support zpci in tcg Cornelia Huck
2 siblings, 1 reply; 5+ messages in thread
From: Cornelia Huck @ 2018-02-01 17:19 UTC (permalink / raw)
To: qemu-s390x, qemu-devel; +Cc: rth, agraf, david, Cornelia Huck
On s390x, pci support is implemented via a set of instructions
(no mmio). Unfortunately, none of them are documented in the
PoP; the code is based upon the existing implementation for KVM
and the Linux zpci driver.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
---
target/s390x/helper.h | 9 ++++
target/s390x/insn-data.def | 13 ++++++
target/s390x/misc_helper.c | 89 +++++++++++++++++++++++++++++++++++++++
target/s390x/translate.c | 102 +++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 213 insertions(+)
diff --git a/target/s390x/helper.h b/target/s390x/helper.h
index 05d52ff309..59cba86a27 100644
--- a/target/s390x/helper.h
+++ b/target/s390x/helper.h
@@ -173,4 +173,13 @@ DEF_HELPER_3(stsch, void, env, i64, i64)
DEF_HELPER_2(tpi, i32, env, i64)
DEF_HELPER_3(tsch, void, env, i64, i64)
DEF_HELPER_2(chsc, void, env, i64)
+
+DEF_HELPER_2(clp, void, env, i32)
+DEF_HELPER_3(pcilg, void, env, i32, i32)
+DEF_HELPER_3(pcistg, void, env, i32, i32)
+DEF_HELPER_4(stpcifc, void, env, i32, i64, i32)
+DEF_HELPER_3(sic, void, env, i64, i64)
+DEF_HELPER_3(rpcit, void, env, i32, i32)
+DEF_HELPER_5(pcistb, void, env, i32, i32, i64, i32)
+DEF_HELPER_4(mpcifc, void, env, i32, i64, i32)
#endif
diff --git a/target/s390x/insn-data.def b/target/s390x/insn-data.def
index c06c3884c0..621e10d615 100644
--- a/target/s390x/insn-data.def
+++ b/target/s390x/insn-data.def
@@ -1068,4 +1068,17 @@
/* ??? Not listed in PoO ninth edition, but there's a linux driver that
uses it: "A CHSC subchannel is usually present on LPAR only." */
C(0xb25f, CHSC, RRE, Z, 0, insn, 0, 0, chsc, 0)
+
+/* zPCI Instructions */
+ /* None of these instructions are documented in the PoP, so this is all
+ based upon target/s390x/kvm.c and Linux code and likely incomplete */
+ C(0xebd0, PCISTB, RSY_a, PCI, la2, 0, 0, 0, pcistb, 0)
+ C(0xebd1, SIC, RSY_a, AIS, r1, r3, 0, 0, sic, 0)
+ C(0xb9a0, CLP, RRF_c, PCI, 0, 0, 0, 0, clp, 0)
+ C(0xb9d0, PCISTG, RRE, PCI, 0, 0, 0, 0, pcistg, 0)
+ C(0xb9d2, PCILG, RRE, PCI, 0, 0, 0, 0, pcilg, 0)
+ C(0xb9d3, RPCIT, RRE, PCI, 0, 0, 0, 0, rpcit, 0)
+ C(0xe3d0, MPCIFC, RXY_a, PCI, la2, 0, 0, 0, mpcifc, 0)
+ C(0xe3d4, STPCIFC, RXY_a, PCI, la2, 0, 0, 0, stpcifc, 0)
+
#endif /* CONFIG_USER_ONLY */
diff --git a/target/s390x/misc_helper.c b/target/s390x/misc_helper.c
index 45cab8c463..e0b23c1fd1 100644
--- a/target/s390x/misc_helper.c
+++ b/target/s390x/misc_helper.c
@@ -38,6 +38,7 @@
#include "hw/s390x/sclp.h"
#include "hw/s390x/s390_flic.h"
#include "hw/s390x/ioinst.h"
+#include "hw/s390x/s390-pci-inst.h"
#include "hw/boards.h"
#endif
@@ -632,3 +633,91 @@ uint32_t HELPER(stfle)(CPUS390XState *env, uint64_t addr)
env->regs[0] = deposit64(env->regs[0], 0, 8, (max_bytes / 8) - 1);
return count_bytes >= max_bytes ? 0 : 3;
}
+
+#ifndef CONFIG_USER_ONLY
+/*
+ * Note: we ignore any return code of the functions called for the pci
+ * instructions, as the only time they return !0 is when the stub is
+ * called, and in that case we didn't even offer the zpci facility.
+ * The only exception is SIC, where program checks need to be handled
+ * by the caller.
+ */
+void HELPER(clp)(CPUS390XState *env, uint32_t r2)
+{
+ S390CPU *cpu = s390_env_get_cpu(env);
+
+ qemu_mutex_lock_iothread();
+ clp_service_call(cpu, r2, GETPC());
+ qemu_mutex_unlock_iothread();
+}
+
+void HELPER(pcilg)(CPUS390XState *env, uint32_t r1, uint32_t r2)
+{
+ S390CPU *cpu = s390_env_get_cpu(env);
+
+ qemu_mutex_lock_iothread();
+ pcilg_service_call(cpu, r1, r2, GETPC());
+ qemu_mutex_unlock_iothread();
+}
+
+void HELPER(pcistg)(CPUS390XState *env, uint32_t r1, uint32_t r2)
+{
+ S390CPU *cpu = s390_env_get_cpu(env);
+
+ qemu_mutex_lock_iothread();
+ pcistg_service_call(cpu, r1, r2, GETPC());
+ qemu_mutex_unlock_iothread();
+}
+
+void HELPER(stpcifc)(CPUS390XState *env, uint32_t r1, uint64_t fiba,
+ uint32_t ar)
+{
+ S390CPU *cpu = s390_env_get_cpu(env);
+
+ qemu_mutex_lock_iothread();
+ stpcifc_service_call(cpu, r1, fiba, ar, GETPC());
+ qemu_mutex_unlock_iothread();
+}
+
+void HELPER(sic)(CPUS390XState *env, uint64_t r1, uint64_t r3)
+{
+ int r;
+
+ qemu_mutex_lock_iothread();
+ r = css_do_sic(env, (r3 >> 27) & 0x7, r1 & 0xffff);
+ qemu_mutex_unlock_iothread();
+ /* css_do_sic() may actually return a PGM_xxx value to inject */
+ if (r) {
+ s390_program_interrupt(env, -r, 4, GETPC());
+ }
+}
+
+void HELPER(rpcit)(CPUS390XState *env, uint32_t r1, uint32_t r2)
+{
+ S390CPU *cpu = s390_env_get_cpu(env);
+
+ qemu_mutex_lock_iothread();
+ rpcit_service_call(cpu, r1, r2, GETPC());
+ qemu_mutex_unlock_iothread();
+}
+
+void HELPER(pcistb)(CPUS390XState *env, uint32_t r1, uint32_t r3,
+ uint64_t gaddr, uint32_t ar)
+{
+ S390CPU *cpu = s390_env_get_cpu(env);
+
+ qemu_mutex_lock_iothread();
+ pcistb_service_call(cpu, r1, r3, gaddr, ar, GETPC());
+ qemu_mutex_unlock_iothread();
+}
+
+void HELPER(mpcifc)(CPUS390XState *env, uint32_t r1, uint64_t fiba,
+ uint32_t ar)
+{
+ S390CPU *cpu = s390_env_get_cpu(env);
+
+ qemu_mutex_lock_iothread();
+ mpcifc_service_call(cpu, r1, fiba, ar, GETPC());
+ qemu_mutex_unlock_iothread();
+}
+#endif
diff --git a/target/s390x/translate.c b/target/s390x/translate.c
index 81abe40673..b470d691d3 100644
--- a/target/s390x/translate.c
+++ b/target/s390x/translate.c
@@ -4785,6 +4785,106 @@ static ExitStatus op_zero2(DisasContext *s, DisasOps *o)
return NO_EXIT;
}
+#ifndef CONFIG_USER_ONLY
+static ExitStatus op_clp(DisasContext *s, DisasOps *o)
+{
+ TCGv_i32 r2 = tcg_const_i32(get_field(s->fields, r2));
+
+ check_privileged(s);
+ gen_helper_clp(cpu_env, r2);
+ tcg_temp_free_i32(r2);
+ set_cc_static(s);
+ return NO_EXIT;
+}
+
+static ExitStatus op_pcilg(DisasContext *s, DisasOps *o)
+{
+ TCGv_i32 r1 = tcg_const_i32(get_field(s->fields, r1));
+ TCGv_i32 r2 = tcg_const_i32(get_field(s->fields, r2));
+
+ check_privileged(s);
+ gen_helper_pcilg(cpu_env, r1, r2);
+ tcg_temp_free_i32(r1);
+ tcg_temp_free_i32(r2);
+ set_cc_static(s);
+ return NO_EXIT;
+}
+
+static ExitStatus op_pcistg(DisasContext *s, DisasOps *o)
+{
+ TCGv_i32 r1 = tcg_const_i32(get_field(s->fields, r1));
+ TCGv_i32 r2 = tcg_const_i32(get_field(s->fields, r2));
+
+ check_privileged(s);
+ gen_helper_pcistg(cpu_env, r1, r2);
+ tcg_temp_free_i32(r1);
+ tcg_temp_free_i32(r2);
+ set_cc_static(s);
+ return NO_EXIT;
+}
+
+static ExitStatus op_stpcifc(DisasContext *s, DisasOps *o)
+{
+ TCGv_i32 r1 = tcg_const_i32(get_field(s->fields, r1));
+ TCGv_i32 ar = tcg_const_i32(get_field(s->fields, b2));
+
+ check_privileged(s);
+ gen_helper_stpcifc(cpu_env, r1, o->addr1, ar);
+ tcg_temp_free_i32(ar);
+ tcg_temp_free_i32(r1);
+ set_cc_static(s);
+ return NO_EXIT;
+}
+
+static ExitStatus op_sic(DisasContext *s, DisasOps *o)
+{
+ check_privileged(s);
+ gen_helper_sic(cpu_env, o->in1, o->in2);
+ return NO_EXIT;
+}
+
+static ExitStatus op_rpcit(DisasContext *s, DisasOps *o)
+{
+ TCGv_i32 r1 = tcg_const_i32(get_field(s->fields, r1));
+ TCGv_i32 r2 = tcg_const_i32(get_field(s->fields, r2));
+
+ check_privileged(s);
+ gen_helper_rpcit(cpu_env, r1, r2);
+ tcg_temp_free_i32(r1);
+ tcg_temp_free_i32(r2);
+ set_cc_static(s);
+ return NO_EXIT;
+}
+
+static ExitStatus op_pcistb(DisasContext *s, DisasOps *o)
+{
+ TCGv_i32 r1 = tcg_const_i32(get_field(s->fields, r1));
+ TCGv_i32 r3 = tcg_const_i32(get_field(s->fields, r3));
+ TCGv_i32 ar = tcg_const_i32(get_field(s->fields, b2));
+
+ check_privileged(s);
+ gen_helper_pcistb(cpu_env, r1, r3, o->addr1, ar);
+ tcg_temp_free_i32(ar);
+ tcg_temp_free_i32(r1);
+ tcg_temp_free_i32(r3);
+ set_cc_static(s);
+ return NO_EXIT;
+}
+
+static ExitStatus op_mpcifc(DisasContext *s, DisasOps *o)
+{
+ TCGv_i32 r1 = tcg_const_i32(get_field(s->fields, r1));
+ TCGv_i32 ar = tcg_const_i32(get_field(s->fields, b2));
+
+ check_privileged(s);
+ gen_helper_mpcifc(cpu_env, r1, o->addr1, ar);
+ tcg_temp_free_i32(ar);
+ tcg_temp_free_i32(r1);
+ set_cc_static(s);
+ return NO_EXIT;
+}
+#endif
+
/* ====================================================================== */
/* The "Cc OUTput" generators. Given the generated output (and in some cases
the original inputs), update the various cc data structures in order to
@@ -5716,6 +5816,8 @@ enum DisasInsnEnum {
#define FAC_MSA4 S390_FEAT_MSA_EXT_4 /* msa-extension-4 facility */
#define FAC_MSA5 S390_FEAT_MSA_EXT_5 /* msa-extension-5 facility */
#define FAC_ECT S390_FEAT_EXTRACT_CPU_TIME
+#define FAC_PCI S390_FEAT_ZPCI /* z/PCI facility */
+#define FAC_AIS S390_FEAT_ADAPTER_INT_SUPPRESSION
static const DisasInsn insn_info[] = {
#include "insn-data.def"
--
2.13.6
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Qemu-devel] [PATCH v3 2/2] s390x/cpumodel: allow zpci features in qemu model
2018-02-01 17:19 [Qemu-devel] [PATCH v3 0/2] s390x: support zpci in tcg Cornelia Huck
2018-02-01 17:19 ` [Qemu-devel] [PATCH v3 1/2] s390x/tcg: wire up pci instructions Cornelia Huck
@ 2018-02-01 17:19 ` Cornelia Huck
2018-02-05 14:35 ` [Qemu-devel] [PATCH v3 0/2] s390x: support zpci in tcg Cornelia Huck
2 siblings, 0 replies; 5+ messages in thread
From: Cornelia Huck @ 2018-02-01 17:19 UTC (permalink / raw)
To: qemu-s390x, qemu-devel; +Cc: rth, agraf, david, Cornelia Huck
AEN and AIS can be provided unconditionally, ZPCI should be turned on
manually.
With -cpu qemu,zpci=on, the guest kernel can now successfully detect
virtio-pci devices under tcg.
Also fixup the order of the MSA_EXT_{3,4} flags while at it.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
---
target/s390x/cpu_models.c | 6 ++++++
target/s390x/gen-features.c | 6 +++++-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/target/s390x/cpu_models.c b/target/s390x/cpu_models.c
index 212a5f0697..250d931d7e 100644
--- a/target/s390x/cpu_models.c
+++ b/target/s390x/cpu_models.c
@@ -23,6 +23,7 @@
#include "qapi/qmp/qbool.h"
#ifndef CONFIG_USER_ONLY
#include "sysemu/arch_init.h"
+#include "hw/pci/pci.h"
#endif
#define CPUDEF_INIT(_type, _gen, _ec_ga, _mha_pow, _hmfai, _name, _desc) \
@@ -1271,6 +1272,11 @@ static void register_types(void)
/* init all bitmaps from gnerated data initially */
s390_init_feat_bitmap(qemu_max_cpu_feat_init, qemu_max_cpu_feat);
+#ifndef CONFIG_USER_ONLY
+ if (!pci_available) {
+ clear_bit(S390_FEAT_ZPCI, qemu_max_cpu_feat);
+ }
+#endif
for (i = 0; i < ARRAY_SIZE(s390_cpu_defs); i++) {
s390_init_feat_bitmap(s390_cpu_defs[i].base_init,
s390_cpu_defs[i].base_feat);
diff --git a/target/s390x/gen-features.c b/target/s390x/gen-features.c
index 0570f597ec..89a140c9a7 100644
--- a/target/s390x/gen-features.c
+++ b/target/s390x/gen-features.c
@@ -572,8 +572,10 @@ static uint16_t qemu_LATEST[] = {
S390_FEAT_STFLE_49,
S390_FEAT_LOCAL_TLB_CLEARING,
S390_FEAT_INTERLOCKED_ACCESS_2,
- S390_FEAT_MSA_EXT_4,
+ S390_FEAT_ADAPTER_EVENT_NOTIFICATION,
+ S390_FEAT_ADAPTER_INT_SUPPRESSION,
S390_FEAT_MSA_EXT_3,
+ S390_FEAT_MSA_EXT_4,
};
/* add all new definitions before this point */
@@ -582,6 +584,8 @@ static uint16_t qemu_MAX[] = {
S390_FEAT_STFLE_53,
/* generates a dependency warning, leave it out for now */
S390_FEAT_MSA_EXT_5,
+ /* only with CONFIG_PCI */
+ S390_FEAT_ZPCI,
};
/****** END FEATURE DEFS ******/
--
2.13.6
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [PATCH v3 1/2] s390x/tcg: wire up pci instructions
2018-02-01 17:19 ` [Qemu-devel] [PATCH v3 1/2] s390x/tcg: wire up pci instructions Cornelia Huck
@ 2018-02-01 17:21 ` David Hildenbrand
0 siblings, 0 replies; 5+ messages in thread
From: David Hildenbrand @ 2018-02-01 17:21 UTC (permalink / raw)
To: Cornelia Huck, qemu-s390x, qemu-devel; +Cc: rth, agraf
On 01.02.2018 18:19, Cornelia Huck wrote:
> On s390x, pci support is implemented via a set of instructions
> (no mmio). Unfortunately, none of them are documented in the
> PoP; the code is based upon the existing implementation for KVM
> and the Linux zpci driver.
>
> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
> ---
> target/s390x/helper.h | 9 ++++
> target/s390x/insn-data.def | 13 ++++++
> target/s390x/misc_helper.c | 89 +++++++++++++++++++++++++++++++++++++++
> target/s390x/translate.c | 102 +++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 213 insertions(+)
>
> diff --git a/target/s390x/helper.h b/target/s390x/helper.h
> index 05d52ff309..59cba86a27 100644
> --- a/target/s390x/helper.h
> +++ b/target/s390x/helper.h
> @@ -173,4 +173,13 @@ DEF_HELPER_3(stsch, void, env, i64, i64)
> DEF_HELPER_2(tpi, i32, env, i64)
> DEF_HELPER_3(tsch, void, env, i64, i64)
> DEF_HELPER_2(chsc, void, env, i64)
> +
> +DEF_HELPER_2(clp, void, env, i32)
> +DEF_HELPER_3(pcilg, void, env, i32, i32)
> +DEF_HELPER_3(pcistg, void, env, i32, i32)
> +DEF_HELPER_4(stpcifc, void, env, i32, i64, i32)
> +DEF_HELPER_3(sic, void, env, i64, i64)
> +DEF_HELPER_3(rpcit, void, env, i32, i32)
> +DEF_HELPER_5(pcistb, void, env, i32, i32, i64, i32)
> +DEF_HELPER_4(mpcifc, void, env, i32, i64, i32)
> #endif
> diff --git a/target/s390x/insn-data.def b/target/s390x/insn-data.def
> index c06c3884c0..621e10d615 100644
> --- a/target/s390x/insn-data.def
> +++ b/target/s390x/insn-data.def
> @@ -1068,4 +1068,17 @@
> /* ??? Not listed in PoO ninth edition, but there's a linux driver that
> uses it: "A CHSC subchannel is usually present on LPAR only." */
> C(0xb25f, CHSC, RRE, Z, 0, insn, 0, 0, chsc, 0)
> +
> +/* zPCI Instructions */
> + /* None of these instructions are documented in the PoP, so this is all
> + based upon target/s390x/kvm.c and Linux code and likely incomplete */
> + C(0xebd0, PCISTB, RSY_a, PCI, la2, 0, 0, 0, pcistb, 0)
> + C(0xebd1, SIC, RSY_a, AIS, r1, r3, 0, 0, sic, 0)
> + C(0xb9a0, CLP, RRF_c, PCI, 0, 0, 0, 0, clp, 0)
> + C(0xb9d0, PCISTG, RRE, PCI, 0, 0, 0, 0, pcistg, 0)
> + C(0xb9d2, PCILG, RRE, PCI, 0, 0, 0, 0, pcilg, 0)
> + C(0xb9d3, RPCIT, RRE, PCI, 0, 0, 0, 0, rpcit, 0)
> + C(0xe3d0, MPCIFC, RXY_a, PCI, la2, 0, 0, 0, mpcifc, 0)
> + C(0xe3d4, STPCIFC, RXY_a, PCI, la2, 0, 0, 0, stpcifc, 0)
> +
> #endif /* CONFIG_USER_ONLY */
> diff --git a/target/s390x/misc_helper.c b/target/s390x/misc_helper.c
> index 45cab8c463..e0b23c1fd1 100644
> --- a/target/s390x/misc_helper.c
> +++ b/target/s390x/misc_helper.c
> @@ -38,6 +38,7 @@
> #include "hw/s390x/sclp.h"
> #include "hw/s390x/s390_flic.h"
> #include "hw/s390x/ioinst.h"
> +#include "hw/s390x/s390-pci-inst.h"
> #include "hw/boards.h"
> #endif
>
> @@ -632,3 +633,91 @@ uint32_t HELPER(stfle)(CPUS390XState *env, uint64_t addr)
> env->regs[0] = deposit64(env->regs[0], 0, 8, (max_bytes / 8) - 1);
> return count_bytes >= max_bytes ? 0 : 3;
> }
> +
> +#ifndef CONFIG_USER_ONLY
> +/*
> + * Note: we ignore any return code of the functions called for the pci
> + * instructions, as the only time they return !0 is when the stub is
> + * called, and in that case we didn't even offer the zpci facility.
> + * The only exception is SIC, where program checks need to be handled
> + * by the caller.
> + */
> +void HELPER(clp)(CPUS390XState *env, uint32_t r2)
> +{
> + S390CPU *cpu = s390_env_get_cpu(env);
> +
> + qemu_mutex_lock_iothread();
> + clp_service_call(cpu, r2, GETPC());
> + qemu_mutex_unlock_iothread();
> +}
> +
> +void HELPER(pcilg)(CPUS390XState *env, uint32_t r1, uint32_t r2)
> +{
> + S390CPU *cpu = s390_env_get_cpu(env);
> +
> + qemu_mutex_lock_iothread();
> + pcilg_service_call(cpu, r1, r2, GETPC());
> + qemu_mutex_unlock_iothread();
> +}
> +
> +void HELPER(pcistg)(CPUS390XState *env, uint32_t r1, uint32_t r2)
> +{
> + S390CPU *cpu = s390_env_get_cpu(env);
> +
> + qemu_mutex_lock_iothread();
> + pcistg_service_call(cpu, r1, r2, GETPC());
> + qemu_mutex_unlock_iothread();
> +}
> +
> +void HELPER(stpcifc)(CPUS390XState *env, uint32_t r1, uint64_t fiba,
> + uint32_t ar)
> +{
> + S390CPU *cpu = s390_env_get_cpu(env);
> +
> + qemu_mutex_lock_iothread();
> + stpcifc_service_call(cpu, r1, fiba, ar, GETPC());
> + qemu_mutex_unlock_iothread();
> +}
> +
> +void HELPER(sic)(CPUS390XState *env, uint64_t r1, uint64_t r3)
> +{
> + int r;
> +
> + qemu_mutex_lock_iothread();
> + r = css_do_sic(env, (r3 >> 27) & 0x7, r1 & 0xffff);
> + qemu_mutex_unlock_iothread();
> + /* css_do_sic() may actually return a PGM_xxx value to inject */
> + if (r) {
> + s390_program_interrupt(env, -r, 4, GETPC());
> + }
> +}
> +
> +void HELPER(rpcit)(CPUS390XState *env, uint32_t r1, uint32_t r2)
> +{
> + S390CPU *cpu = s390_env_get_cpu(env);
> +
> + qemu_mutex_lock_iothread();
> + rpcit_service_call(cpu, r1, r2, GETPC());
> + qemu_mutex_unlock_iothread();
> +}
> +
> +void HELPER(pcistb)(CPUS390XState *env, uint32_t r1, uint32_t r3,
> + uint64_t gaddr, uint32_t ar)
> +{
> + S390CPU *cpu = s390_env_get_cpu(env);
> +
> + qemu_mutex_lock_iothread();
> + pcistb_service_call(cpu, r1, r3, gaddr, ar, GETPC());
> + qemu_mutex_unlock_iothread();
> +}
> +
> +void HELPER(mpcifc)(CPUS390XState *env, uint32_t r1, uint64_t fiba,
> + uint32_t ar)
> +{
> + S390CPU *cpu = s390_env_get_cpu(env);
> +
> + qemu_mutex_lock_iothread();
> + mpcifc_service_call(cpu, r1, fiba, ar, GETPC());
> + qemu_mutex_unlock_iothread();
> +}
> +#endif
> diff --git a/target/s390x/translate.c b/target/s390x/translate.c
> index 81abe40673..b470d691d3 100644
> --- a/target/s390x/translate.c
> +++ b/target/s390x/translate.c
> @@ -4785,6 +4785,106 @@ static ExitStatus op_zero2(DisasContext *s, DisasOps *o)
> return NO_EXIT;
> }
>
> +#ifndef CONFIG_USER_ONLY
> +static ExitStatus op_clp(DisasContext *s, DisasOps *o)
> +{
> + TCGv_i32 r2 = tcg_const_i32(get_field(s->fields, r2));
> +
> + check_privileged(s);
> + gen_helper_clp(cpu_env, r2);
> + tcg_temp_free_i32(r2);
> + set_cc_static(s);
> + return NO_EXIT;
> +}
> +
> +static ExitStatus op_pcilg(DisasContext *s, DisasOps *o)
> +{
> + TCGv_i32 r1 = tcg_const_i32(get_field(s->fields, r1));
> + TCGv_i32 r2 = tcg_const_i32(get_field(s->fields, r2));
> +
> + check_privileged(s);
> + gen_helper_pcilg(cpu_env, r1, r2);
> + tcg_temp_free_i32(r1);
> + tcg_temp_free_i32(r2);
> + set_cc_static(s);
> + return NO_EXIT;
> +}
> +
> +static ExitStatus op_pcistg(DisasContext *s, DisasOps *o)
> +{
> + TCGv_i32 r1 = tcg_const_i32(get_field(s->fields, r1));
> + TCGv_i32 r2 = tcg_const_i32(get_field(s->fields, r2));
> +
> + check_privileged(s);
> + gen_helper_pcistg(cpu_env, r1, r2);
> + tcg_temp_free_i32(r1);
> + tcg_temp_free_i32(r2);
> + set_cc_static(s);
> + return NO_EXIT;
> +}
> +
> +static ExitStatus op_stpcifc(DisasContext *s, DisasOps *o)
> +{
> + TCGv_i32 r1 = tcg_const_i32(get_field(s->fields, r1));
> + TCGv_i32 ar = tcg_const_i32(get_field(s->fields, b2));
> +
> + check_privileged(s);
> + gen_helper_stpcifc(cpu_env, r1, o->addr1, ar);
> + tcg_temp_free_i32(ar);
> + tcg_temp_free_i32(r1);
> + set_cc_static(s);
> + return NO_EXIT;
> +}
> +
> +static ExitStatus op_sic(DisasContext *s, DisasOps *o)
> +{
> + check_privileged(s);
> + gen_helper_sic(cpu_env, o->in1, o->in2);
> + return NO_EXIT;
> +}
> +
> +static ExitStatus op_rpcit(DisasContext *s, DisasOps *o)
> +{
> + TCGv_i32 r1 = tcg_const_i32(get_field(s->fields, r1));
> + TCGv_i32 r2 = tcg_const_i32(get_field(s->fields, r2));
> +
> + check_privileged(s);
> + gen_helper_rpcit(cpu_env, r1, r2);
> + tcg_temp_free_i32(r1);
> + tcg_temp_free_i32(r2);
> + set_cc_static(s);
> + return NO_EXIT;
> +}
> +
> +static ExitStatus op_pcistb(DisasContext *s, DisasOps *o)
> +{
> + TCGv_i32 r1 = tcg_const_i32(get_field(s->fields, r1));
> + TCGv_i32 r3 = tcg_const_i32(get_field(s->fields, r3));
> + TCGv_i32 ar = tcg_const_i32(get_field(s->fields, b2));
> +
> + check_privileged(s);
> + gen_helper_pcistb(cpu_env, r1, r3, o->addr1, ar);
> + tcg_temp_free_i32(ar);
> + tcg_temp_free_i32(r1);
> + tcg_temp_free_i32(r3);
> + set_cc_static(s);
> + return NO_EXIT;
> +}
> +
> +static ExitStatus op_mpcifc(DisasContext *s, DisasOps *o)
> +{
> + TCGv_i32 r1 = tcg_const_i32(get_field(s->fields, r1));
> + TCGv_i32 ar = tcg_const_i32(get_field(s->fields, b2));
> +
> + check_privileged(s);
> + gen_helper_mpcifc(cpu_env, r1, o->addr1, ar);
> + tcg_temp_free_i32(ar);
> + tcg_temp_free_i32(r1);
> + set_cc_static(s);
> + return NO_EXIT;
> +}
> +#endif
> +
> /* ====================================================================== */
> /* The "Cc OUTput" generators. Given the generated output (and in some cases
> the original inputs), update the various cc data structures in order to
> @@ -5716,6 +5816,8 @@ enum DisasInsnEnum {
> #define FAC_MSA4 S390_FEAT_MSA_EXT_4 /* msa-extension-4 facility */
> #define FAC_MSA5 S390_FEAT_MSA_EXT_5 /* msa-extension-5 facility */
> #define FAC_ECT S390_FEAT_EXTRACT_CPU_TIME
> +#define FAC_PCI S390_FEAT_ZPCI /* z/PCI facility */
> +#define FAC_AIS S390_FEAT_ADAPTER_INT_SUPPRESSION
>
> static const DisasInsn insn_info[] = {
> #include "insn-data.def"
>
Reviewed-by: David Hildenbrand <david@redhat.com>
--
Thanks,
David / dhildenb
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [PATCH v3 0/2] s390x: support zpci in tcg
2018-02-01 17:19 [Qemu-devel] [PATCH v3 0/2] s390x: support zpci in tcg Cornelia Huck
2018-02-01 17:19 ` [Qemu-devel] [PATCH v3 1/2] s390x/tcg: wire up pci instructions Cornelia Huck
2018-02-01 17:19 ` [Qemu-devel] [PATCH v3 2/2] s390x/cpumodel: allow zpci features in qemu model Cornelia Huck
@ 2018-02-05 14:35 ` Cornelia Huck
2 siblings, 0 replies; 5+ messages in thread
From: Cornelia Huck @ 2018-02-05 14:35 UTC (permalink / raw)
To: qemu-s390x, qemu-devel; +Cc: rth, agraf, david
On Thu, 1 Feb 2018 18:19:33 +0100
Cornelia Huck <cohuck@redhat.com> wrote:
> More cleanup, as suggested by David, and also a fixed-up SIC. We can
> now turn on ais as well and run with a pre-4.15 kernel and pci devices.
>
> Branch at git://github.com/cohuck/qemu pci-tcg updated.
>
> Changes v2->v3:
> - SIC should depend on AIS, which is now supported for tcg as well
> - fixup calling css_do_sic()
> - no need to check return codes for the pci instruction handlers
> - minor cleanup
>
> Cornelia Huck (2):
> s390x/tcg: wire up pci instructions
> s390x/cpumodel: allow zpci features in qemu model
>
> target/s390x/cpu_models.c | 6 +++
> target/s390x/gen-features.c | 6 ++-
> target/s390x/helper.h | 9 ++++
> target/s390x/insn-data.def | 13 ++++++
> target/s390x/misc_helper.c | 89 ++++++++++++++++++++++++++++++++++++++
> target/s390x/translate.c | 102 ++++++++++++++++++++++++++++++++++++++++++++
> 6 files changed, 224 insertions(+), 1 deletion(-)
>
OK, queued to s390-next. Let's see what breaks :)
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-02-05 14:36 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-02-01 17:19 [Qemu-devel] [PATCH v3 0/2] s390x: support zpci in tcg Cornelia Huck
2018-02-01 17:19 ` [Qemu-devel] [PATCH v3 1/2] s390x/tcg: wire up pci instructions Cornelia Huck
2018-02-01 17:21 ` David Hildenbrand
2018-02-01 17:19 ` [Qemu-devel] [PATCH v3 2/2] s390x/cpumodel: allow zpci features in qemu model Cornelia Huck
2018-02-05 14:35 ` [Qemu-devel] [PATCH v3 0/2] s390x: support zpci in tcg Cornelia Huck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).