qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Markus Armbruster <armbru@redhat.com>
To: qemu-devel@nongnu.org
Cc: alistair.francis@xilinx.com,
	"Paul Burton" <paul.burton@imgtec.com>,
	"Aurelien Jarno" <aurelien@aurel32.net>,
	"Yongbok Kim" <yongbok.kim@imgtec.com>,
	"Hervé Poussineau" <hpoussin@reactos.org>
Subject: [Qemu-devel] [PATCH v7 05/15] hw/mips: Replace fprintf(stderr, "*\n" with error_report()
Date: Fri,  2 Feb 2018 19:37:21 +0100	[thread overview]
Message-ID: <20180202183731.29990-6-armbru@redhat.com> (raw)
In-Reply-To: <20180202183731.29990-1-armbru@redhat.com>

From: Alistair Francis <alistair.francis@xilinx.com>

Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.

find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +

Some lines where then manually tweaked to pass checkpatch.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>

Conversions that aren't followed by exit() dropped, because they might
be inappropriate.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 hw/mips/mips_fulong2e.c | 13 ++++++-------
 hw/mips/mips_jazz.c     |  4 ++--
 hw/mips/mips_malta.c    | 16 +++++++---------
 hw/mips/mips_mipssim.c  | 11 +++++------
 hw/mips/mips_r4k.c      | 16 +++++++---------
 5 files changed, 27 insertions(+), 33 deletions(-)

diff --git a/hw/mips/mips_fulong2e.c b/hw/mips/mips_fulong2e.c
index 725e25a134..f68c625666 100644
--- a/hw/mips/mips_fulong2e.c
+++ b/hw/mips/mips_fulong2e.c
@@ -120,7 +120,7 @@ static int64_t load_kernel (CPUMIPSState *env)
                            (uint64_t *)&kernel_low, (uint64_t *)&kernel_high,
                            0, EM_MIPS, 1, 0);
     if (kernel_size < 0) {
-        error_report("qemu: could not load kernel '%s': %s",
+        error_report("could not load kernel '%s': %s",
                      loaderparams.kernel_filename,
                      load_elf_strerror(kernel_size));
         exit(1);
@@ -134,17 +134,16 @@ static int64_t load_kernel (CPUMIPSState *env)
         if (initrd_size > 0) {
             initrd_offset = (kernel_high + ~INITRD_PAGE_MASK) & INITRD_PAGE_MASK;
             if (initrd_offset + initrd_size > ram_size) {
-                fprintf(stderr,
-                        "qemu: memory too small for initial ram disk '%s'\n",
-                        loaderparams.initrd_filename);
+                error_report("memory too small for initial ram disk '%s'",
+                             loaderparams.initrd_filename);
                 exit(1);
             }
             initrd_size = load_image_targphys(loaderparams.initrd_filename,
                                      initrd_offset, ram_size - initrd_offset);
         }
         if (initrd_size == (target_ulong) -1) {
-            fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
-                    loaderparams.initrd_filename);
+            error_report("could not load initial ram disk '%s'",
+                         loaderparams.initrd_filename);
             exit(1);
         }
     }
@@ -338,7 +337,7 @@ static void mips_fulong2e_init(MachineState *machine)
 
     isa_bus = vt82c686b_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 0));
     if (!isa_bus) {
-        fprintf(stderr, "vt82c686b_init error\n");
+        error_report("vt82c686b_init error");
         exit(1);
     }
 
diff --git a/hw/mips/mips_jazz.c b/hw/mips/mips_jazz.c
index 0d2c0683ba..596f3c210e 100644
--- a/hw/mips/mips_jazz.c
+++ b/hw/mips/mips_jazz.c
@@ -268,10 +268,10 @@ static void mips_jazz_init(MachineState *machine,
             sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(rc4030, 4));
             break;
         } else if (is_help_option(nd->model)) {
-            fprintf(stderr, "qemu: Supported NICs: dp83932\n");
+            error_report("Supported NICs: dp83932");
             exit(1);
         } else {
-            fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model);
+            error_report("Unsupported NIC: %s", nd->model);
             exit(1);
         }
     }
diff --git a/hw/mips/mips_malta.c b/hw/mips/mips_malta.c
index 37f19428d6..7ca8ba2086 100644
--- a/hw/mips/mips_malta.c
+++ b/hw/mips/mips_malta.c
@@ -812,7 +812,7 @@ static int64_t load_kernel (void)
                            NULL, (uint64_t *)&kernel_entry, NULL,
                            (uint64_t *)&kernel_high, big_endian, EM_MIPS, 1, 0);
     if (kernel_size < 0) {
-        error_report("qemu: could not load kernel '%s': %s",
+        error_report("could not load kernel '%s': %s",
                      loaderparams.kernel_filename,
                      load_elf_strerror(kernel_size));
         exit(1);
@@ -846,9 +846,8 @@ static int64_t load_kernel (void)
             initrd_offset = (loaderparams.ram_low_size - initrd_size - 131072
                              - ~INITRD_PAGE_MASK) & INITRD_PAGE_MASK;
             if (kernel_high >= initrd_offset) {
-                fprintf(stderr,
-                        "qemu: memory too small for initial ram disk '%s'\n",
-                        loaderparams.initrd_filename);
+                error_report("memory too small for initial ram disk '%s'",
+                             loaderparams.initrd_filename);
                 exit(1);
             }
             initrd_size = load_image_targphys(loaderparams.initrd_filename,
@@ -856,8 +855,8 @@ static int64_t load_kernel (void)
                                               ram_size - initrd_offset);
         }
         if (initrd_size == (target_ulong) -1) {
-            fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
-                    loaderparams.initrd_filename);
+            error_report("could not load initial ram disk '%s'",
+                         loaderparams.initrd_filename);
             exit(1);
         }
     }
@@ -1034,9 +1033,8 @@ void mips_malta_init(MachineState *machine)
 
     /* allocate RAM */
     if (ram_size > (2048u << 20)) {
-        fprintf(stderr,
-                "qemu: Too much memory for this machine: %d MB, maximum 2048 MB\n",
-                ((unsigned int)ram_size / (1 << 20)));
+        error_report("Too much memory for this machine: %dMB, maximum 2048MB",
+                     ((unsigned int)ram_size / (1 << 20)));
         exit(1);
     }
 
diff --git a/hw/mips/mips_mipssim.c b/hw/mips/mips_mipssim.c
index e5d3654586..e0ba5efc84 100644
--- a/hw/mips/mips_mipssim.c
+++ b/hw/mips/mips_mipssim.c
@@ -78,7 +78,7 @@ static int64_t load_kernel(void)
         if ((entry & ~0x7fffffffULL) == 0x80000000)
             entry = (int32_t)entry;
     } else {
-        error_report("qemu: could not load kernel '%s': %s",
+        error_report("could not load kernel '%s': %s",
                      loaderparams.kernel_filename,
                      load_elf_strerror(kernel_size));
         exit(1);
@@ -92,17 +92,16 @@ static int64_t load_kernel(void)
         if (initrd_size > 0) {
             initrd_offset = (kernel_high + ~INITRD_PAGE_MASK) & INITRD_PAGE_MASK;
             if (initrd_offset + initrd_size > loaderparams.ram_size) {
-                fprintf(stderr,
-                        "qemu: memory too small for initial ram disk '%s'\n",
-                        loaderparams.initrd_filename);
+                error_report("memory too small for initial ram disk '%s'",
+                             loaderparams.initrd_filename);
                 exit(1);
             }
             initrd_size = load_image_targphys(loaderparams.initrd_filename,
                 initrd_offset, loaderparams.ram_size - initrd_offset);
         }
         if (initrd_size == (target_ulong) -1) {
-            fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
-                    loaderparams.initrd_filename);
+            error_report("could not load initial ram disk '%s'",
+                         loaderparams.initrd_filename);
             exit(1);
         }
     }
diff --git a/hw/mips/mips_r4k.c b/hw/mips/mips_r4k.c
index 244bd41813..830ee7732c 100644
--- a/hw/mips/mips_r4k.c
+++ b/hw/mips/mips_r4k.c
@@ -98,7 +98,7 @@ static int64_t load_kernel(void)
         if ((entry & ~0x7fffffffULL) == 0x80000000)
             entry = (int32_t)entry;
     } else {
-        error_report("qemu: could not load kernel '%s': %s",
+        error_report("could not load kernel '%s': %s",
                      loaderparams.kernel_filename,
                      load_elf_strerror(kernel_size));
         exit(1);
@@ -112,9 +112,8 @@ static int64_t load_kernel(void)
         if (initrd_size > 0) {
             initrd_offset = (kernel_high + ~INITRD_PAGE_MASK) & INITRD_PAGE_MASK;
             if (initrd_offset + initrd_size > ram_size) {
-                fprintf(stderr,
-                        "qemu: memory too small for initial ram disk '%s'\n",
-                        loaderparams.initrd_filename);
+                error_report("memory too small for initial ram disk '%s'",
+                             loaderparams.initrd_filename);
                 exit(1);
             }
             initrd_size = load_image_targphys(loaderparams.initrd_filename,
@@ -122,8 +121,8 @@ static int64_t load_kernel(void)
                                               ram_size - initrd_offset);
         }
         if (initrd_size == (target_ulong) -1) {
-            fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
-                    loaderparams.initrd_filename);
+            error_report("could not load initial ram disk '%s'",
+                         loaderparams.initrd_filename);
             exit(1);
         }
     }
@@ -196,9 +195,8 @@ void mips_r4k_init(MachineState *machine)
 
     /* allocate RAM */
     if (ram_size > (256 << 20)) {
-        fprintf(stderr,
-                "qemu: Too much memory for this machine: %d MB, maximum 256 MB\n",
-                ((unsigned int)ram_size / (1 << 20)));
+        error_report("Too much memory for this machine: %dMB, maximum 256MB",
+                     ((unsigned int)ram_size / (1 << 20)));
         exit(1);
     }
     memory_region_allocate_system_memory(ram, NULL, "mips_r4k.ram", ram_size);
-- 
2.13.6

  parent reply	other threads:[~2018-02-02 18:39 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-02 18:37 [Qemu-devel] [PATCH v7 00/15] Remove some of the fprintf(stderr, "* Markus Armbruster
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 01/15] audio: Replace AUDIO_FUNC with __func__ Markus Armbruster
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 02/15] hw/arm: Replace fprintf(stderr, "*\n" with error_report() Markus Armbruster
2018-02-02 19:35   ` Eric Blake
2018-02-03  8:42     ` Markus Armbruster
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 03/15] hw/dma: " Markus Armbruster
2018-02-03 20:18   ` Thomas Huth
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 04/15] hw/lm32: " Markus Armbruster
2018-02-02 18:37 ` Markus Armbruster [this message]
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 06/15] hw/moxie: " Markus Armbruster
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 07/15] hw/openrisc: " Markus Armbruster
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 08/15] hw/pci*: " Markus Armbruster
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 09/15] hw/ppc: " Markus Armbruster
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 10/15] hw/sd: " Markus Armbruster
2018-02-03 20:12   ` Thomas Huth
2018-02-05  6:27     ` Markus Armbruster
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 11/15] hw/sparc*: " Markus Armbruster
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 12/15] hw/timer: " Markus Armbruster
2018-02-02 20:24   ` Philippe Mathieu-Daudé
2018-02-03  7:51     ` Markus Armbruster
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 13/15] hw/xen*: " Markus Armbruster
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 14/15] tcg: " Markus Armbruster
2018-02-02 18:37 ` [Qemu-devel] [PATCH v7 15/15] target: Use qemu_log() instead of fprintf(stderr, ...) Markus Armbruster
2018-02-02 19:59   ` Eric Blake
2018-02-03  7:42     ` Markus Armbruster
2018-02-02 19:45 ` [Qemu-devel] [PATCH v7 00/15] Remove some of the fprintf(stderr, "* Alistair Francis
2018-02-02 20:21 ` Philippe Mathieu-Daudé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180202183731.29990-6-armbru@redhat.com \
    --to=armbru@redhat.com \
    --cc=alistair.francis@xilinx.com \
    --cc=aurelien@aurel32.net \
    --cc=hpoussin@reactos.org \
    --cc=paul.burton@imgtec.com \
    --cc=qemu-devel@nongnu.org \
    --cc=yongbok.kim@imgtec.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).