qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Michael Roth <mdroth@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: qemu-stable@nongnu.org, christian.ehrhardt@canonical.com,
	Peter Maydell <peter.maydell@linaro.org>
Subject: [Qemu-devel] [PATCH 11/54] hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI
Date: Tue,  6 Feb 2018 13:14:32 -0600	[thread overview]
Message-ID: <20180206191515.25830-12-mdroth@linux.vnet.ibm.com> (raw)
In-Reply-To: <20180206191515.25830-1-mdroth@linux.vnet.ibm.com>

From: Peter Maydell <peter.maydell@linaro.org>

The GICv3 specification says that reserved register addresses
should RAZ/WI. This means we need to return MEMTX_OK, not MEMTX_ERROR,
because now that we support generating external aborts the
latter will cause an abort on new board models.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1513183941-24300-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
(cherry picked from commit f1945632b43e36bd9f3e0c2feb0e5b152be7ed91)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
---
 hw/intc/arm_gicv3_dist.c       | 13 +++++++++++++
 hw/intc/arm_gicv3_its_common.c |  8 +++-----
 hw/intc/arm_gicv3_redist.c     | 13 +++++++++++++
 3 files changed, 29 insertions(+), 5 deletions(-)

diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c
index 3ea3dd0d40..93fe936862 100644
--- a/hw/intc/arm_gicv3_dist.c
+++ b/hw/intc/arm_gicv3_dist.c
@@ -817,6 +817,13 @@ MemTxResult gicv3_dist_read(void *opaque, hwaddr offset, uint64_t *data,
                       "%s: invalid guest read at offset " TARGET_FMT_plx
                       "size %u\n", __func__, offset, size);
         trace_gicv3_dist_badread(offset, size, attrs.secure);
+        /* The spec requires that reserved registers are RAZ/WI;
+         * so use MEMTX_ERROR returns from leaf functions as a way to
+         * trigger the guest-error logging but don't return it to
+         * the caller, or we'll cause a spurious guest data abort.
+         */
+        r = MEMTX_OK;
+        *data = 0;
     } else {
         trace_gicv3_dist_read(offset, *data, size, attrs.secure);
     }
@@ -852,6 +859,12 @@ MemTxResult gicv3_dist_write(void *opaque, hwaddr offset, uint64_t data,
                       "%s: invalid guest write at offset " TARGET_FMT_plx
                       "size %u\n", __func__, offset, size);
         trace_gicv3_dist_badwrite(offset, data, size, attrs.secure);
+        /* The spec requires that reserved registers are RAZ/WI;
+         * so use MEMTX_ERROR returns from leaf functions as a way to
+         * trigger the guest-error logging but don't return it to
+         * the caller, or we'll cause a spurious guest data abort.
+         */
+        r = MEMTX_OK;
     } else {
         trace_gicv3_dist_write(offset, data, size, attrs.secure);
     }
diff --git a/hw/intc/arm_gicv3_its_common.c b/hw/intc/arm_gicv3_its_common.c
index f2cce597a9..48a85524b7 100644
--- a/hw/intc/arm_gicv3_its_common.c
+++ b/hw/intc/arm_gicv3_its_common.c
@@ -67,7 +67,8 @@ static MemTxResult gicv3_its_trans_read(void *opaque, hwaddr offset,
                                         MemTxAttrs attrs)
 {
     qemu_log_mask(LOG_GUEST_ERROR, "ITS read at offset 0x%"PRIx64"\n", offset);
-    return MEMTX_ERROR;
+    *data = 0;
+    return MEMTX_OK;
 }
 
 static MemTxResult gicv3_its_trans_write(void *opaque, hwaddr offset,
@@ -82,15 +83,12 @@ static MemTxResult gicv3_its_trans_write(void *opaque, hwaddr offset,
         if (ret <= 0) {
             qemu_log_mask(LOG_GUEST_ERROR,
                           "ITS: Error sending MSI: %s\n", strerror(-ret));
-            return MEMTX_DECODE_ERROR;
         }
-
-        return MEMTX_OK;
     } else {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "ITS write at bad offset 0x%"PRIx64"\n", offset);
-        return MEMTX_DECODE_ERROR;
     }
+    return MEMTX_OK;
 }
 
 static const MemoryRegionOps gicv3_its_trans_ops = {
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index 77e5cfa327..8a8684d76e 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -455,6 +455,13 @@ MemTxResult gicv3_redist_read(void *opaque, hwaddr offset, uint64_t *data,
                       "size %u\n", __func__, offset, size);
         trace_gicv3_redist_badread(gicv3_redist_affid(cs), offset,
                                    size, attrs.secure);
+        /* The spec requires that reserved registers are RAZ/WI;
+         * so use MEMTX_ERROR returns from leaf functions as a way to
+         * trigger the guest-error logging but don't return it to
+         * the caller, or we'll cause a spurious guest data abort.
+         */
+        r = MEMTX_OK;
+        *data = 0;
     } else {
         trace_gicv3_redist_read(gicv3_redist_affid(cs), offset, *data,
                                 size, attrs.secure);
@@ -505,6 +512,12 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
                       "size %u\n", __func__, offset, size);
         trace_gicv3_redist_badwrite(gicv3_redist_affid(cs), offset, data,
                                     size, attrs.secure);
+        /* The spec requires that reserved registers are RAZ/WI;
+         * so use MEMTX_ERROR returns from leaf functions as a way to
+         * trigger the guest-error logging but don't return it to
+         * the caller, or we'll cause a spurious guest data abort.
+         */
+        r = MEMTX_OK;
     } else {
         trace_gicv3_redist_write(gicv3_redist_affid(cs), offset, data,
                                  size, attrs.secure);
-- 
2.11.0

  parent reply	other threads:[~2018-02-06 19:15 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-06 19:14 [Qemu-devel] [PATCH 00/54] Patch Round-up for stable 2.11.1, freeze on 2018-02-12 Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 01/54] target/i386: Fix handling of VEX prefixes Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 02/54] block/iscsi: dont leave allocmap in an invalid state on UNMAP failure Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 03/54] target/sh4: fix TCG leak during gusa sequence Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 04/54] qemu-options: Remove stray colons from output of --help Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 05/54] qemu-pr-helper: miscellaneous fixes Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 06/54] block/nbd: fix segmentation fault when .desc is not null-terminated Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 07/54] block: Make bdrv_drain_invoke() recursive Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 08/54] block: Call .drain_begin only once in bdrv_drain_all_begin() Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 09/54] block: Open backing image in force share mode for size probe Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 10/54] vfio: Fix vfio-kvm group registration Michael Roth
2018-02-06 19:14 ` Michael Roth [this message]
2018-02-06 19:14 ` [Qemu-devel] [PATCH 12/54] hw/intc/arm_gic: reserved register addresses are RAZ/WI Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 13/54] virtio_error: don't invoke status callbacks Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 14/54] vhost: remove assertion to prevent crash Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 15/54] hw/sd/pl181: Reset SD card on controller reset Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 16/54] hw/sd/milkymist-memcard: " Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 17/54] hw/sd/ssi-sd: " Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 18/54] scsi-disk: release AioContext in unaligned WRITE SAME case Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 19/54] hw/pci-bridge: fix QEMU crash because of pcie-root-port Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 20/54] i386: Change X86CPUDefinition::model_id to const char* Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 21/54] i386: Add support for SPEC_CTRL MSR Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 22/54] i386: Add spec-ctrl CPUID bit Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 23/54] i386: Add FEAT_8000_0008_EBX CPUID feature word Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 24/54] i386: Add new -IBRS versions of Intel CPU models Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 25/54] i386: Add EPYC-IBPB CPU model Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 26/54] linux-user: Fix locking order in fork_start() Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 27/54] s390x: fix storage attributes migration for non-small guests Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 28/54] linux-headers: update to 4.15-rc1 Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 29/54] linux-headers: update Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 30/54] s390x/kvm: Handle bpb feature Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 31/54] s390x/kvm: provide stfle.81 Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 32/54] osdep: Retry SETLK upon EINTR Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 33/54] usb-storage: Fix share-rw option parsing Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 34/54] spapr_pci: fix MSI/MSIX selection Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 35/54] linux-user/signal.c: Rename MC_* defines Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 36/54] spapr: don't initialize PATB entry if max-cpu-compat < power9 Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 37/54] spapr: Add pseries-2.12 machine type Michael Roth
2018-02-06 19:14 ` [Qemu-devel] [PATCH 38/54] spapr: Capabilities infrastructure Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 39/54] spapr: Treat Hardware Transactional Memory (HTM) as an optional capability Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 40/54] spapr: Validate capabilities on migration Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 41/54] target/ppc: Clean up probing of VMX, VSX and DFP availability on KVM Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 42/54] spapr: Handle VMX/VSX presence as an spapr capability flag Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 43/54] spapr: Handle Decimal Floating Point (DFP) as an optional capability Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 44/54] hw/ppc/spapr_caps: Rework spapr_caps to use uint8 internal representation Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 45/54] ppc: Change Power9 compat table to support at most 8 threads/core Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 46/54] spapr: fix device tree properties when using compatibility mode Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 47/54] target/ppc: introduce the PPC_BIT() macro Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 48/54] target/ppc/spapr_caps: Add macro to generate spapr_caps migration vmstate Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 49/54] target/ppc/kvm: Add cap_ppc_safe_[cache/bounds_check/indirect_branch] Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 50/54] target/ppc/spapr_caps: Add support for tristate spapr_capabilities Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 51/54] target/ppc/spapr_caps: Add new tristate cap safe_cache Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 52/54] target/ppc/spapr_caps: Add new tristate cap safe_bounds_check Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 53/54] target/ppc/spapr_caps: Add new tristate cap safe_indirect_branch Michael Roth
2018-02-06 19:15 ` [Qemu-devel] [PATCH 54/54] target/ppc/spapr: Add H-Call H_GET_CPU_CHARACTERISTICS Michael Roth
2018-02-07  6:47 ` [Qemu-devel] [PATCH 00/54] Patch Round-up for stable 2.11.1, freeze on 2018-02-12 Thomas Huth
2018-02-07 10:28   ` Daniel P. Berrangé
2018-02-07  9:28 ` Cornelia Huck
2018-02-07  9:42 ` [Qemu-devel] [Qemu-stable] " Greg Kurz
2018-02-08 12:51 ` Peter Lieven
2018-02-12 16:13   ` Dr. David Alan Gilbert
2018-02-13 16:30     ` Greg Kurz
2018-02-16  9:46     ` Peter Lieven
2018-02-08 13:26 ` [Qemu-devel] " Philippe Mathieu-Daudé
2018-02-13  1:44 ` [Qemu-devel] [Qemu-stable] " Michael Roth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180206191515.25830-12-mdroth@linux.vnet.ibm.com \
    --to=mdroth@linux.vnet.ibm.com \
    --cc=christian.ehrhardt@canonical.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-stable@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).