From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: Alexey Perevalov <a.perevalov@samsung.com>,
"Daniel P . Berrange" <berrange@redhat.com>,
Juan Quintela <quintela@redhat.com>,
Andrea Arcangeli <aarcange@redhat.com>,
"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
peterx@redhat.com
Subject: [Qemu-devel] [PATCH v6 09/28] migration: allow fault thread to pause
Date: Thu, 8 Feb 2018 18:31:13 +0800 [thread overview]
Message-ID: <20180208103132.28452-10-peterx@redhat.com> (raw)
In-Reply-To: <20180208103132.28452-1-peterx@redhat.com>
Allows the fault thread to stop handling page faults temporarily. When
network failure happened (and if we expect a recovery afterwards), we
should not allow the fault thread to continue sending things to source,
instead, it should halt for a while until the connection is rebuilt.
When the dest main thread noticed the failure, it kicks the fault thread
to switch to pause state.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
---
migration/migration.c | 1 +
migration/migration.h | 1 +
migration/postcopy-ram.c | 50 ++++++++++++++++++++++++++++++++++++++++++++----
migration/savevm.c | 3 +++
migration/trace-events | 2 ++
5 files changed, 53 insertions(+), 4 deletions(-)
diff --git a/migration/migration.c b/migration/migration.c
index b3899c2b6e..4a8c873b52 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -156,6 +156,7 @@ MigrationIncomingState *migration_incoming_get_current(void)
qemu_mutex_init(&mis_current.rp_mutex);
qemu_event_init(&mis_current.main_thread_load_event, false);
qemu_sem_init(&mis_current.postcopy_pause_sem_dst, 0);
+ qemu_sem_init(&mis_current.postcopy_pause_sem_fault, 0);
once = true;
}
return &mis_current;
diff --git a/migration/migration.h b/migration/migration.h
index ecdb38ee53..c39e325615 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -64,6 +64,7 @@ struct MigrationIncomingState {
/* notify PAUSED postcopy incoming migrations to try to continue */
QemuSemaphore postcopy_pause_sem_dst;
+ QemuSemaphore postcopy_pause_sem_fault;
};
MigrationIncomingState *migration_incoming_get_current(void);
diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
index 032abfbf1a..31c290c884 100644
--- a/migration/postcopy-ram.c
+++ b/migration/postcopy-ram.c
@@ -485,6 +485,17 @@ static int ram_block_enable_notify(const char *block_name, void *host_addr,
return 0;
}
+static bool postcopy_pause_fault_thread(MigrationIncomingState *mis)
+{
+ trace_postcopy_pause_fault_thread();
+
+ qemu_sem_wait(&mis->postcopy_pause_sem_fault);
+
+ trace_postcopy_pause_fault_thread_continued();
+
+ return true;
+}
+
/*
* Handle faults detected by the USERFAULT markings
*/
@@ -535,6 +546,22 @@ static void *postcopy_ram_fault_thread(void *opaque)
}
}
+ if (!mis->to_src_file) {
+ /*
+ * Possibly someone tells us that the return path is
+ * broken already using the event. We should hold until
+ * the channel is rebuilt.
+ */
+ if (postcopy_pause_fault_thread(mis)) {
+ last_rb = NULL;
+ /* Continue to read the userfaultfd */
+ } else {
+ error_report("%s: paused but don't allow to continue",
+ __func__);
+ break;
+ }
+ }
+
ret = read(mis->userfault_fd, &msg, sizeof(msg));
if (ret != sizeof(msg)) {
if (errno == EAGAIN) {
@@ -574,18 +601,33 @@ static void *postcopy_ram_fault_thread(void *opaque)
qemu_ram_get_idstr(rb),
rb_offset);
+retry:
/*
* Send the request to the source - we want to request one
* of our host page sizes (which is >= TPS)
*/
if (rb != last_rb) {
last_rb = rb;
- migrate_send_rp_req_pages(mis, qemu_ram_get_idstr(rb),
- rb_offset, qemu_ram_pagesize(rb));
+ ret = migrate_send_rp_req_pages(mis, qemu_ram_get_idstr(rb),
+ rb_offset, qemu_ram_pagesize(rb));
} else {
/* Save some space */
- migrate_send_rp_req_pages(mis, NULL,
- rb_offset, qemu_ram_pagesize(rb));
+ ret = migrate_send_rp_req_pages(mis, NULL,
+ rb_offset, qemu_ram_pagesize(rb));
+ }
+
+ if (ret) {
+ /* May be network failure, try to wait for recovery */
+ if (ret == -EIO && postcopy_pause_fault_thread(mis)) {
+ /* We got reconnected somehow, try to continue */
+ last_rb = NULL;
+ goto retry;
+ } else {
+ /* This is a unavoidable fault */
+ error_report("%s: migrate_send_rp_req_pages() get %d",
+ __func__, ret);
+ break;
+ }
}
}
trace_postcopy_ram_fault_thread_exit();
diff --git a/migration/savevm.c b/migration/savevm.c
index d83c1e846a..5b1a0a7fe1 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -2054,6 +2054,9 @@ static bool postcopy_pause_incoming(MigrationIncomingState *mis)
mis->to_src_file = NULL;
qemu_mutex_unlock(&mis->rp_mutex);
+ /* Notify the fault thread for the invalidated file handle */
+ postcopy_fault_thread_notify(mis);
+
error_report("Detected IO failure for postcopy. "
"Migration paused.");
diff --git a/migration/trace-events b/migration/trace-events
index ca17a70222..06a919a6e3 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -101,6 +101,8 @@ open_return_path_on_source_continue(void) ""
postcopy_start(void) ""
postcopy_pause_return_path(void) ""
postcopy_pause_return_path_continued(void) ""
+postcopy_pause_fault_thread(void) ""
+postcopy_pause_fault_thread_continued(void) ""
postcopy_pause_continued(void) ""
postcopy_pause_incoming(void) ""
postcopy_pause_incoming_continued(void) ""
--
2.14.3
next prev parent reply other threads:[~2018-02-08 10:32 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-08 10:31 [Qemu-devel] [PATCH v6 00/28] Migration: postcopy failure recovery Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 01/28] migration: better error handling with QEMUFile Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 02/28] migration: reuse mis->userfault_quit_fd Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 03/28] migration: provide postcopy_fault_thread_notify() Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 04/28] migration: new postcopy-pause state Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 05/28] migration: implement "postcopy-pause" src logic Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 06/28] migration: allow dst vm pause on postcopy Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 07/28] migration: allow src return path to pause Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 08/28] migration: allow send_rq to fail Peter Xu
2018-02-08 10:31 ` Peter Xu [this message]
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 10/28] qmp: hmp: add migrate "resume" option Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 11/28] migration: pass MigrationState to migrate_init() Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 12/28] migration: rebuild channel on source Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 13/28] migration: new state "postcopy-recover" Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 14/28] migration: wakeup dst ram-load-thread for recover Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 15/28] migration: new cmd MIG_CMD_RECV_BITMAP Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 16/28] migration: new message MIG_RP_MSG_RECV_BITMAP Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 17/28] migration: new cmd MIG_CMD_POSTCOPY_RESUME Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 18/28] migration: new message MIG_RP_MSG_RESUME_ACK Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 19/28] migration: introduce SaveVMHandlers.resume_prepare Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 20/28] migration: synchronize dirty bitmap for resume Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 21/28] migration: setup ramstate " Peter Xu
2018-02-13 18:17 ` Dr. David Alan Gilbert
2018-02-14 4:20 ` Peter Xu
2018-02-14 18:40 ` Dr. David Alan Gilbert
2018-02-22 7:34 ` Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 22/28] migration: final handshake for the resume Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 23/28] migration: init dst in migration_object_init too Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 24/28] io: let watcher of the channel run in same ctx Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 25/28] qmp/migration: new command migrate-recover Peter Xu
2018-02-13 18:56 ` Dr. David Alan Gilbert
2018-02-14 4:30 ` Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 26/28] hmp/migration: add migrate_recover command Peter Xu
2018-02-13 19:45 ` Dr. David Alan Gilbert
2018-02-14 4:48 ` Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 27/28] migration/qmp: add command migrate-pause Peter Xu
2018-02-13 20:11 ` Dr. David Alan Gilbert
2018-02-14 4:56 ` Peter Xu
2018-02-14 18:56 ` Dr. David Alan Gilbert
2018-02-22 7:43 ` Peter Xu
2018-02-28 20:14 ` Dr. David Alan Gilbert
2018-03-13 9:13 ` Peter Xu
2018-03-13 12:35 ` Dr. David Alan Gilbert
2018-03-13 15:57 ` Peter Xu
2018-03-13 16:05 ` Dr. David Alan Gilbert
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 28/28] migration/hmp: add migrate_pause command Peter Xu
2018-02-13 20:14 ` Dr. David Alan Gilbert
2018-02-08 10:38 ` [Qemu-devel] [PATCH v6 00/28] Migration: postcopy failure recovery Peter Xu
2018-02-08 11:25 ` no-reply
2018-02-09 6:07 ` Peter Xu
2018-02-09 6:19 ` Fam Zheng
2018-02-08 11:27 ` no-reply
2018-02-08 11:28 ` no-reply
2018-02-08 11:30 ` no-reply
2018-02-08 12:18 ` no-reply
2018-02-09 6:28 ` Peter Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180208103132.28452-10-peterx@redhat.com \
--to=peterx@redhat.com \
--cc=a.perevalov@samsung.com \
--cc=aarcange@redhat.com \
--cc=berrange@redhat.com \
--cc=dgilbert@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).