From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: Alexey Perevalov <a.perevalov@samsung.com>,
"Daniel P . Berrange" <berrange@redhat.com>,
Juan Quintela <quintela@redhat.com>,
Andrea Arcangeli <aarcange@redhat.com>,
"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
peterx@redhat.com
Subject: [Qemu-devel] [PATCH v6 15/28] migration: new cmd MIG_CMD_RECV_BITMAP
Date: Thu, 8 Feb 2018 18:31:19 +0800 [thread overview]
Message-ID: <20180208103132.28452-16-peterx@redhat.com> (raw)
In-Reply-To: <20180208103132.28452-1-peterx@redhat.com>
Add a new vm command MIG_CMD_RECV_BITMAP to request received bitmap for
one ramblock.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
---
migration/savevm.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++++
migration/savevm.h | 1 +
migration/trace-events | 2 ++
3 files changed, 64 insertions(+)
diff --git a/migration/savevm.c b/migration/savevm.c
index 4a75e66aab..7abd510b0a 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -78,6 +78,7 @@ enum qemu_vm_cmd {
were previously sent during
precopy but are dirty. */
MIG_CMD_PACKAGED, /* Send a wrapped stream within this stream */
+ MIG_CMD_RECV_BITMAP, /* Request for recved bitmap on dst */
MIG_CMD_MAX
};
@@ -95,6 +96,7 @@ static struct mig_cmd_args {
[MIG_CMD_POSTCOPY_RAM_DISCARD] = {
.len = -1, .name = "POSTCOPY_RAM_DISCARD" },
[MIG_CMD_PACKAGED] = { .len = 4, .name = "PACKAGED" },
+ [MIG_CMD_RECV_BITMAP] = { .len = -1, .name = "RECV_BITMAP" },
[MIG_CMD_MAX] = { .len = -1, .name = "MAX" },
};
@@ -953,6 +955,19 @@ void qemu_savevm_send_postcopy_run(QEMUFile *f)
qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_RUN, 0, NULL);
}
+void qemu_savevm_send_recv_bitmap(QEMUFile *f, char *block_name)
+{
+ size_t len;
+ char buf[256];
+
+ trace_savevm_send_recv_bitmap(block_name);
+
+ buf[0] = len = strlen(block_name);
+ memcpy(buf + 1, block_name, len);
+
+ qemu_savevm_command_send(f, MIG_CMD_RECV_BITMAP, len + 1, (uint8_t *)buf);
+}
+
bool qemu_savevm_state_blocked(Error **errp)
{
SaveStateEntry *se;
@@ -1775,6 +1790,49 @@ static int loadvm_handle_cmd_packaged(MigrationIncomingState *mis)
return ret;
}
+/*
+ * Handle request that source requests for recved_bitmap on
+ * destination. Payload format:
+ *
+ * len (1 byte) + ramblock_name (<255 bytes)
+ */
+static int loadvm_handle_recv_bitmap(MigrationIncomingState *mis,
+ uint16_t len)
+{
+ QEMUFile *file = mis->from_src_file;
+ RAMBlock *rb;
+ char block_name[256];
+ size_t cnt;
+
+ cnt = qemu_get_counted_string(file, block_name);
+ if (!cnt) {
+ error_report("%s: failed to read block name", __func__);
+ return -EINVAL;
+ }
+
+ /* Validate before using the data */
+ if (qemu_file_get_error(file)) {
+ return qemu_file_get_error(file);
+ }
+
+ if (len != cnt + 1) {
+ error_report("%s: invalid payload length (%d)", __func__, len);
+ return -EINVAL;
+ }
+
+ rb = qemu_ram_block_by_name(block_name);
+ if (!rb) {
+ error_report("%s: block '%s' not found", __func__, block_name);
+ return -EINVAL;
+ }
+
+ /* TODO: send the bitmap back to source */
+
+ trace_loadvm_handle_recv_bitmap(block_name);
+
+ return 0;
+}
+
/*
* Process an incoming 'QEMU_VM_COMMAND'
* 0 just a normal return
@@ -1848,6 +1906,9 @@ static int loadvm_process_command(QEMUFile *f)
case MIG_CMD_POSTCOPY_RAM_DISCARD:
return loadvm_postcopy_ram_handle_discard(mis, len);
+
+ case MIG_CMD_RECV_BITMAP:
+ return loadvm_handle_recv_bitmap(mis, len);
}
return 0;
diff --git a/migration/savevm.h b/migration/savevm.h
index 295c4a1f2c..8126b1cc14 100644
--- a/migration/savevm.h
+++ b/migration/savevm.h
@@ -46,6 +46,7 @@ int qemu_savevm_send_packaged(QEMUFile *f, const uint8_t *buf, size_t len);
void qemu_savevm_send_postcopy_advise(QEMUFile *f);
void qemu_savevm_send_postcopy_listen(QEMUFile *f);
void qemu_savevm_send_postcopy_run(QEMUFile *f);
+void qemu_savevm_send_recv_bitmap(QEMUFile *f, char *block_name);
void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
uint16_t len,
diff --git a/migration/trace-events b/migration/trace-events
index 06a919a6e3..62b27fbf11 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -12,6 +12,7 @@ loadvm_state_cleanup(void) ""
loadvm_handle_cmd_packaged(unsigned int length) "%u"
loadvm_handle_cmd_packaged_main(int ret) "%d"
loadvm_handle_cmd_packaged_received(int ret) "%d"
+loadvm_handle_recv_bitmap(char *s) "%s"
loadvm_postcopy_handle_advise(void) ""
loadvm_postcopy_handle_listen(void) ""
loadvm_postcopy_handle_run(void) ""
@@ -34,6 +35,7 @@ savevm_send_open_return_path(void) ""
savevm_send_ping(uint32_t val) "0x%x"
savevm_send_postcopy_listen(void) ""
savevm_send_postcopy_run(void) ""
+savevm_send_recv_bitmap(char *name) "%s"
savevm_state_setup(void) ""
savevm_state_header(void) ""
savevm_state_iterate(void) ""
--
2.14.3
next prev parent reply other threads:[~2018-02-08 10:32 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-08 10:31 [Qemu-devel] [PATCH v6 00/28] Migration: postcopy failure recovery Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 01/28] migration: better error handling with QEMUFile Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 02/28] migration: reuse mis->userfault_quit_fd Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 03/28] migration: provide postcopy_fault_thread_notify() Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 04/28] migration: new postcopy-pause state Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 05/28] migration: implement "postcopy-pause" src logic Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 06/28] migration: allow dst vm pause on postcopy Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 07/28] migration: allow src return path to pause Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 08/28] migration: allow send_rq to fail Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 09/28] migration: allow fault thread to pause Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 10/28] qmp: hmp: add migrate "resume" option Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 11/28] migration: pass MigrationState to migrate_init() Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 12/28] migration: rebuild channel on source Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 13/28] migration: new state "postcopy-recover" Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 14/28] migration: wakeup dst ram-load-thread for recover Peter Xu
2018-02-08 10:31 ` Peter Xu [this message]
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 16/28] migration: new message MIG_RP_MSG_RECV_BITMAP Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 17/28] migration: new cmd MIG_CMD_POSTCOPY_RESUME Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 18/28] migration: new message MIG_RP_MSG_RESUME_ACK Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 19/28] migration: introduce SaveVMHandlers.resume_prepare Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 20/28] migration: synchronize dirty bitmap for resume Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 21/28] migration: setup ramstate " Peter Xu
2018-02-13 18:17 ` Dr. David Alan Gilbert
2018-02-14 4:20 ` Peter Xu
2018-02-14 18:40 ` Dr. David Alan Gilbert
2018-02-22 7:34 ` Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 22/28] migration: final handshake for the resume Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 23/28] migration: init dst in migration_object_init too Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 24/28] io: let watcher of the channel run in same ctx Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 25/28] qmp/migration: new command migrate-recover Peter Xu
2018-02-13 18:56 ` Dr. David Alan Gilbert
2018-02-14 4:30 ` Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 26/28] hmp/migration: add migrate_recover command Peter Xu
2018-02-13 19:45 ` Dr. David Alan Gilbert
2018-02-14 4:48 ` Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 27/28] migration/qmp: add command migrate-pause Peter Xu
2018-02-13 20:11 ` Dr. David Alan Gilbert
2018-02-14 4:56 ` Peter Xu
2018-02-14 18:56 ` Dr. David Alan Gilbert
2018-02-22 7:43 ` Peter Xu
2018-02-28 20:14 ` Dr. David Alan Gilbert
2018-03-13 9:13 ` Peter Xu
2018-03-13 12:35 ` Dr. David Alan Gilbert
2018-03-13 15:57 ` Peter Xu
2018-03-13 16:05 ` Dr. David Alan Gilbert
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 28/28] migration/hmp: add migrate_pause command Peter Xu
2018-02-13 20:14 ` Dr. David Alan Gilbert
2018-02-08 10:38 ` [Qemu-devel] [PATCH v6 00/28] Migration: postcopy failure recovery Peter Xu
2018-02-08 11:25 ` no-reply
2018-02-09 6:07 ` Peter Xu
2018-02-09 6:19 ` Fam Zheng
2018-02-08 11:27 ` no-reply
2018-02-08 11:28 ` no-reply
2018-02-08 11:30 ` no-reply
2018-02-08 12:18 ` no-reply
2018-02-09 6:28 ` Peter Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180208103132.28452-16-peterx@redhat.com \
--to=peterx@redhat.com \
--cc=a.perevalov@samsung.com \
--cc=aarcange@redhat.com \
--cc=berrange@redhat.com \
--cc=dgilbert@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).