qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: Alexey Perevalov <a.perevalov@samsung.com>,
	"Daniel P . Berrange" <berrange@redhat.com>,
	Juan Quintela <quintela@redhat.com>,
	Andrea Arcangeli <aarcange@redhat.com>,
	"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
	peterx@redhat.com
Subject: [Qemu-devel] [PATCH v6 01/28] migration: better error handling with QEMUFile
Date: Thu,  8 Feb 2018 18:31:05 +0800	[thread overview]
Message-ID: <20180208103132.28452-2-peterx@redhat.com> (raw)
In-Reply-To: <20180208103132.28452-1-peterx@redhat.com>

If the postcopy down due to some reason, we can always see this on dst:

  qemu-system-x86_64: RP: Received invalid message 0x0000 length 0x0000

However in most cases that's not the real issue. The problem is that
qemu_get_be16() has no way to show whether the returned data is valid or
not, and we are _always_ assuming it is valid. That's possibly not wise.

The best approach to solve this would be: refactoring QEMUFile interface
to allow the APIs to return error if there is. However it needs quite a
bit of work and testing. For now, let's explicitly check the validity
first before using the data in all places for qemu_get_*().

This patch tries to fix most of the cases I can see. Only if we are with
this, can we make sure we are processing the valid data, and also can we
make sure we can capture the channel down events correctly.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
---
 migration/migration.c |  5 +++++
 migration/ram.c       | 21 +++++++++++++++++----
 migration/savevm.c    | 40 ++++++++++++++++++++++++++++++++++++++--
 3 files changed, 60 insertions(+), 6 deletions(-)

diff --git a/migration/migration.c b/migration/migration.c
index dec406d25d..9d2660dd6f 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -1707,6 +1707,11 @@ static void *source_return_path_thread(void *opaque)
         header_type = qemu_get_be16(rp);
         header_len = qemu_get_be16(rp);
 
+        if (qemu_file_get_error(rp)) {
+            mark_source_rp_bad(ms);
+            goto out;
+        }
+
         if (header_type >= MIG_RP_MSG_MAX ||
             header_type == MIG_RP_MSG_INVALID) {
             error_report("RP: Received invalid message 0x%04x length 0x%04x",
diff --git a/migration/ram.c b/migration/ram.c
index 5a109efeda..09e8013501 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -2696,6 +2696,16 @@ static int ram_load_postcopy(QEMUFile *f)
         uint8_t ch;
 
         addr = qemu_get_be64(f);
+
+        /*
+         * If qemu file error, we should stop here, and then "addr"
+         * may be invalid
+         */
+        ret = qemu_file_get_error(f);
+        if (ret) {
+            break;
+        }
+
         flags = addr & ~TARGET_PAGE_MASK;
         addr &= TARGET_PAGE_MASK;
 
@@ -2776,9 +2786,15 @@ static int ram_load_postcopy(QEMUFile *f)
             error_report("Unknown combination of migration flags: %#x"
                          " (postcopy mode)", flags);
             ret = -EINVAL;
+            break;
+        }
+
+        /* Detect for any possible file errors */
+        if (!ret && qemu_file_get_error(f)) {
+            ret = qemu_file_get_error(f);
         }
 
-        if (place_needed) {
+        if (!ret && place_needed) {
             /* This gets called at the last target page in the host page */
             void *place_dest = host + TARGET_PAGE_SIZE - block->page_size;
 
@@ -2790,9 +2806,6 @@ static int ram_load_postcopy(QEMUFile *f)
                                           place_source, block);
             }
         }
-        if (!ret) {
-            ret = qemu_file_get_error(f);
-        }
     }
 
     return ret;
diff --git a/migration/savevm.c b/migration/savevm.c
index f202c3de3a..76fcc2b1c3 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1780,6 +1780,11 @@ static int loadvm_process_command(QEMUFile *f)
     cmd = qemu_get_be16(f);
     len = qemu_get_be16(f);
 
+    /* Check validity before continue processing of cmds */
+    if (qemu_file_get_error(f)) {
+        return qemu_file_get_error(f);
+    }
+
     trace_loadvm_process_command(cmd, len);
     if (cmd >= MIG_CMD_MAX || cmd == MIG_CMD_INVALID) {
         error_report("MIG_CMD 0x%x unknown (len 0x%x)", cmd, len);
@@ -1845,6 +1850,7 @@ static int loadvm_process_command(QEMUFile *f)
  */
 static bool check_section_footer(QEMUFile *f, SaveStateEntry *se)
 {
+    int ret;
     uint8_t read_mark;
     uint32_t read_section_id;
 
@@ -1855,6 +1861,13 @@ static bool check_section_footer(QEMUFile *f, SaveStateEntry *se)
 
     read_mark = qemu_get_byte(f);
 
+    ret = qemu_file_get_error(f);
+    if (ret) {
+        error_report("%s: Read section footer failed: %d",
+                     __func__, ret);
+        return false;
+    }
+
     if (read_mark != QEMU_VM_SECTION_FOOTER) {
         error_report("Missing section footer for %s", se->idstr);
         return false;
@@ -1890,6 +1903,13 @@ qemu_loadvm_section_start_full(QEMUFile *f, MigrationIncomingState *mis)
     instance_id = qemu_get_be32(f);
     version_id = qemu_get_be32(f);
 
+    ret = qemu_file_get_error(f);
+    if (ret) {
+        error_report("%s: Failed to read instance/version ID: %d",
+                     __func__, ret);
+        return ret;
+    }
+
     trace_qemu_loadvm_state_section_startfull(section_id, idstr,
             instance_id, version_id);
     /* Find savevm section */
@@ -1937,6 +1957,13 @@ qemu_loadvm_section_part_end(QEMUFile *f, MigrationIncomingState *mis)
 
     section_id = qemu_get_be32(f);
 
+    ret = qemu_file_get_error(f);
+    if (ret) {
+        error_report("%s: Failed to read section ID: %d",
+                     __func__, ret);
+        return ret;
+    }
+
     trace_qemu_loadvm_state_section_partend(section_id);
     QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
         if (se->load_section_id == section_id) {
@@ -2004,8 +2031,14 @@ static int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis)
     uint8_t section_type;
     int ret = 0;
 
-    while ((section_type = qemu_get_byte(f)) != QEMU_VM_EOF) {
-        ret = 0;
+    while (true) {
+        section_type = qemu_get_byte(f);
+
+        if (qemu_file_get_error(f)) {
+            ret = qemu_file_get_error(f);
+            break;
+        }
+
         trace_qemu_loadvm_state_section(section_type);
         switch (section_type) {
         case QEMU_VM_SECTION_START:
@@ -2029,6 +2062,9 @@ static int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis)
                 goto out;
             }
             break;
+        case QEMU_VM_EOF:
+            /* This is the end of migration */
+            goto out;
         default:
             error_report("Unknown savevm section type %d", section_type);
             ret = -EINVAL;
-- 
2.14.3

  reply	other threads:[~2018-02-08 10:31 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-08 10:31 [Qemu-devel] [PATCH v6 00/28] Migration: postcopy failure recovery Peter Xu
2018-02-08 10:31 ` Peter Xu [this message]
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 02/28] migration: reuse mis->userfault_quit_fd Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 03/28] migration: provide postcopy_fault_thread_notify() Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 04/28] migration: new postcopy-pause state Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 05/28] migration: implement "postcopy-pause" src logic Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 06/28] migration: allow dst vm pause on postcopy Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 07/28] migration: allow src return path to pause Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 08/28] migration: allow send_rq to fail Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 09/28] migration: allow fault thread to pause Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 10/28] qmp: hmp: add migrate "resume" option Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 11/28] migration: pass MigrationState to migrate_init() Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 12/28] migration: rebuild channel on source Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 13/28] migration: new state "postcopy-recover" Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 14/28] migration: wakeup dst ram-load-thread for recover Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 15/28] migration: new cmd MIG_CMD_RECV_BITMAP Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 16/28] migration: new message MIG_RP_MSG_RECV_BITMAP Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 17/28] migration: new cmd MIG_CMD_POSTCOPY_RESUME Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 18/28] migration: new message MIG_RP_MSG_RESUME_ACK Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 19/28] migration: introduce SaveVMHandlers.resume_prepare Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 20/28] migration: synchronize dirty bitmap for resume Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 21/28] migration: setup ramstate " Peter Xu
2018-02-13 18:17   ` Dr. David Alan Gilbert
2018-02-14  4:20     ` Peter Xu
2018-02-14 18:40       ` Dr. David Alan Gilbert
2018-02-22  7:34         ` Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 22/28] migration: final handshake for the resume Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 23/28] migration: init dst in migration_object_init too Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 24/28] io: let watcher of the channel run in same ctx Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 25/28] qmp/migration: new command migrate-recover Peter Xu
2018-02-13 18:56   ` Dr. David Alan Gilbert
2018-02-14  4:30     ` Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 26/28] hmp/migration: add migrate_recover command Peter Xu
2018-02-13 19:45   ` Dr. David Alan Gilbert
2018-02-14  4:48     ` Peter Xu
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 27/28] migration/qmp: add command migrate-pause Peter Xu
2018-02-13 20:11   ` Dr. David Alan Gilbert
2018-02-14  4:56     ` Peter Xu
2018-02-14 18:56       ` Dr. David Alan Gilbert
2018-02-22  7:43         ` Peter Xu
2018-02-28 20:14           ` Dr. David Alan Gilbert
2018-03-13  9:13             ` Peter Xu
2018-03-13 12:35               ` Dr. David Alan Gilbert
2018-03-13 15:57                 ` Peter Xu
2018-03-13 16:05                   ` Dr. David Alan Gilbert
2018-02-08 10:31 ` [Qemu-devel] [PATCH v6 28/28] migration/hmp: add migrate_pause command Peter Xu
2018-02-13 20:14   ` Dr. David Alan Gilbert
2018-02-08 10:38 ` [Qemu-devel] [PATCH v6 00/28] Migration: postcopy failure recovery Peter Xu
2018-02-08 11:25 ` no-reply
2018-02-09  6:07   ` Peter Xu
2018-02-09  6:19     ` Fam Zheng
2018-02-08 11:27 ` no-reply
2018-02-08 11:28 ` no-reply
2018-02-08 11:30 ` no-reply
2018-02-08 12:18 ` no-reply
2018-02-09  6:28 ` Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180208103132.28452-2-peterx@redhat.com \
    --to=peterx@redhat.com \
    --cc=a.perevalov@samsung.com \
    --cc=aarcange@redhat.com \
    --cc=berrange@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).