From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 13/55] sheepdog: Make sd_prealloc() take a BDS
Date: Tue, 13 Feb 2018 18:04:47 +0100 [thread overview]
Message-ID: <20180213170529.10858-14-kwolf@redhat.com> (raw)
In-Reply-To: <20180213170529.10858-1-kwolf@redhat.com>
From: Max Reitz <mreitz@redhat.com>
We want to use this function in sd_truncate() later on, so taking a
filename is not exactly ideal.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/sheepdog.c | 29 +++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)
diff --git a/block/sheepdog.c b/block/sheepdog.c
index af125a2c8d..cc1d37b3da 100644
--- a/block/sheepdog.c
+++ b/block/sheepdog.c
@@ -1826,10 +1826,10 @@ static int do_sd_create(BDRVSheepdogState *s, uint32_t *vdi_id, int snapshot,
return 0;
}
-static int sd_prealloc(const char *filename, Error **errp)
+static int sd_prealloc(BlockDriverState *bs, Error **errp)
{
BlockBackend *blk = NULL;
- BDRVSheepdogState *base = NULL;
+ BDRVSheepdogState *base = bs->opaque;
unsigned long buf_size;
uint32_t idx, max_idx;
uint32_t object_size;
@@ -1837,10 +1837,11 @@ static int sd_prealloc(const char *filename, Error **errp)
void *buf = NULL;
int ret;
- blk = blk_new_open(filename, NULL, NULL,
- BDRV_O_RDWR | BDRV_O_RESIZE | BDRV_O_PROTOCOL, errp);
- if (blk == NULL) {
- ret = -EIO;
+ blk = blk_new(BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE | BLK_PERM_RESIZE,
+ BLK_PERM_ALL);
+
+ ret = blk_insert_bs(blk, bs, errp);
+ if (ret < 0) {
goto out_with_err_set;
}
@@ -1852,7 +1853,6 @@ static int sd_prealloc(const char *filename, Error **errp)
goto out;
}
- base = blk_bs(blk)->opaque;
object_size = (UINT32_C(1) << base->inode.block_size_shift);
buf_size = MIN(object_size, SD_DATA_OBJ_SIZE);
buf = g_malloc0(buf_size);
@@ -2108,7 +2108,20 @@ static int sd_create(const char *filename, QemuOpts *opts,
}
if (prealloc) {
- ret = sd_prealloc(filename, errp);
+ BlockDriverState *bs;
+ QDict *opts;
+
+ opts = qdict_new();
+ qdict_put_str(opts, "driver", "sheepdog");
+ bs = bdrv_open(filename, NULL, opts, BDRV_O_PROTOCOL | BDRV_O_RDWR,
+ errp);
+ if (!bs) {
+ goto out;
+ }
+
+ ret = sd_prealloc(bs, errp);
+
+ bdrv_unref(bs);
}
out:
g_free(backing_file);
--
2.13.6
next prev parent reply other threads:[~2018-02-13 17:05 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-13 17:04 [Qemu-devel] [PULL 00/55] Block layer patches Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 01/55] iotests: Fix CID for VMDK afl image Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 02/55] qemu-img.texi: Clean up parameter list Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 03/55] qemu-img: Document --force-share / -U Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 04/55] docs: Document share-rw property more thoroughly Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 05/55] qcow2: Use g_try_realloc() in qcow2_expand_zero_clusters() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 06/55] block: early check for blockers on drive-mirror Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 07/55] iotests: Use virtio-blk in 155 Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 08/55] qemu-io: fix EOF Ctrl-D handling in qemu-io readline code Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 09/55] gluster: Move glfs_close() to create's clean-up Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 10/55] gluster: Pull truncation from qemu_gluster_create Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 11/55] gluster: Query current size in do_truncate() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 12/55] gluster: Add preallocated truncation Kevin Wolf
2018-02-13 17:04 ` Kevin Wolf [this message]
2018-05-08 15:33 ` [Qemu-devel] [PULL 13/55] sheepdog: Make sd_prealloc() take a BDS Peter Maydell
2018-02-13 17:04 ` [Qemu-devel] [PULL 14/55] sheepdog: Pass old and new size to sd_prealloc() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 15/55] sheepdog: Allow fully preallocated truncation Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 16/55] block: maintain persistent disabled bitmaps Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 17/55] qcow2: Fix documentation of get_cluster_table() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 18/55] qcow2: Add table size field to Qcow2Cache Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 19/55] qcow2: Remove BDS parameter from qcow2_cache_get_table_addr() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 20/55] qcow2: Remove BDS parameter from qcow2_cache_get_table_idx() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 21/55] qcow2: Remove BDS parameter from qcow2_cache_table_release() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 22/55] qcow2: Remove BDS parameter from qcow2_cache_entry_mark_dirty() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 23/55] qcow2: Remove BDS parameter from qcow2_cache_put() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 24/55] qcow2: Remove BDS parameter from qcow2_cache_destroy() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 25/55] qcow2: Remove BDS parameter from qcow2_cache_clean_unused() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 26/55] qcow2: Remove BDS parameter from qcow2_cache_discard() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 27/55] qcow2: Remove BDS parameter from qcow2_cache_is_table_offset() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 28/55] qcow2: Add offset_to_l1_index() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 29/55] qcow2: Add l2_slice_size field to BDRVQcow2State Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 30/55] qcow2: Add offset_to_l2_slice_index() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 31/55] qcow2: Update l2_load() to support L2 slices Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 32/55] qcow2: Prepare l2_allocate() for adding L2 slice support Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 33/55] qcow2: Update l2_allocate() to support L2 slices Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 34/55] qcow2: Refactor get_cluster_table() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 35/55] qcow2: Update get_cluster_table() to support L2 slices Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 36/55] qcow2: Update qcow2_get_cluster_offset() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 37/55] qcow2: Update qcow2_alloc_cluster_link_l2() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 38/55] qcow2: Update handle_copied() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 39/55] qcow2: Update handle_alloc() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 40/55] qcow2: Update discard_single_l2() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 41/55] qcow2: Update zero_single_l2() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 42/55] qcow2: Prepare qcow2_update_snapshot_refcount() for adding L2 slice support Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 43/55] qcow2: Update qcow2_update_snapshot_refcount() to support L2 slices Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 44/55] qcow2: Read refcount before L2 table in expand_zero_clusters_in_l1() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 45/55] qcow2: Prepare expand_zero_clusters_in_l1() for adding L2 slice support Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 46/55] qcow2: Update expand_zero_clusters_in_l1() to support L2 slices Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 47/55] qcow2: Update qcow2_truncate() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 48/55] qcow2: Rename l2_table in qcow2_alloc_compressed_cluster_offset() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 49/55] qcow2: Rename l2_table in count_contiguous_clusters() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 50/55] qcow2: Rename l2_table in count_contiguous_clusters_unallocated() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 51/55] qcow2: Rename l2_table in count_cow_clusters() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 52/55] qcow2: Allow configuring the L2 slice size Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 53/55] iotests: Test valid values of l2-cache-entry-size Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 54/55] iotests: Test downgrading an image using a small L2 slice size Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 55/55] iotests: Add l2-cache-entry-size to iotest 137 Kevin Wolf
2018-02-15 10:13 ` [Qemu-devel] [PULL 00/55] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180213170529.10858-14-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).