qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, famz@redhat.com, qemu-block@nongnu.org,
	Ronnie Sahlberg <ronniesahlberg@gmail.com>,
	Paolo Bonzini <pbonzini@redhat.com>, Peter Lieven <pl@kamp.de>,
	Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v8 08/21] iscsi: Switch to .bdrv_co_block_status()
Date: Tue, 13 Feb 2018 14:26:48 -0600	[thread overview]
Message-ID: <20180213202701.15858-9-eblake@redhat.com> (raw)
In-Reply-To: <20180213202701.15858-1-eblake@redhat.com>

We are gradually moving away from sector-based interfaces, towards
byte-based.  Update the iscsi driver accordingly.  In this case,
it is handy to teach iscsi_co_block_status() to handle a NULL map
and file parameter, even though the block layer passes non-NULL
values, because we also call the function directly.  For now, there
are no optimizations done based on the want_zero flag.

We can also make the simplification of asserting that the block
layer passed in aligned values.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>

---
v8: rebase to master
v7: rebase to master
v6: no change
v5: assert rather than check for alignment
v4: rebase to interface tweaks
v3: no change
v2: rebase to mapping parameter
---
 block/iscsi.c | 67 ++++++++++++++++++++++++++++-------------------------------
 1 file changed, 32 insertions(+), 35 deletions(-)

diff --git a/block/iscsi.c b/block/iscsi.c
index d2b0466775c..4842519fdad 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -653,36 +653,36 @@ out_unlock:



-static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
-                                                  int64_t sector_num,
-                                                  int nb_sectors, int *pnum,
-                                                  BlockDriverState **file)
+static int coroutine_fn iscsi_co_block_status(BlockDriverState *bs,
+                                              bool want_zero, int64_t offset,
+                                              int64_t bytes, int64_t *pnum,
+                                              int64_t *map,
+                                              BlockDriverState **file)
 {
     IscsiLun *iscsilun = bs->opaque;
     struct scsi_get_lba_status *lbas = NULL;
     struct scsi_lba_status_descriptor *lbasd = NULL;
     struct IscsiTask iTask;
     uint64_t lba;
-    int64_t ret;
+    int ret;

     iscsi_co_init_iscsitask(iscsilun, &iTask);

-    if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
-        ret = -EINVAL;
-        goto out;
-    }
+    assert(QEMU_IS_ALIGNED(offset | bytes, iscsilun->block_size));

     /* default to all sectors allocated */
-    ret = BDRV_BLOCK_DATA;
-    ret |= (sector_num << BDRV_SECTOR_BITS) | BDRV_BLOCK_OFFSET_VALID;
-    *pnum = nb_sectors;
+    ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
+    if (map) {
+        *map = offset;
+    }
+    *pnum = bytes;

     /* LUN does not support logical block provisioning */
     if (!iscsilun->lbpme) {
         goto out;
     }

-    lba = sector_qemu2lun(sector_num, iscsilun);
+    lba = offset / iscsilun->block_size;

     qemu_mutex_lock(&iscsilun->mutex);
 retry:
@@ -727,12 +727,12 @@ retry:

     lbasd = &lbas->descriptors[0];

-    if (sector_qemu2lun(sector_num, iscsilun) != lbasd->lba) {
+    if (lba != lbasd->lba) {
         ret = -EIO;
         goto out_unlock;
     }

-    *pnum = sector_lun2qemu(lbasd->num_blocks, iscsilun);
+    *pnum = lbasd->num_blocks * iscsilun->block_size;

     if (lbasd->provisioning == SCSI_PROVISIONING_TYPE_DEALLOCATED ||
         lbasd->provisioning == SCSI_PROVISIONING_TYPE_ANCHORED) {
@@ -743,15 +743,13 @@ retry:
     }

     if (ret & BDRV_BLOCK_ZERO) {
-        iscsi_allocmap_set_unallocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
-                                       *pnum * BDRV_SECTOR_SIZE);
+        iscsi_allocmap_set_unallocated(iscsilun, offset, *pnum);
     } else {
-        iscsi_allocmap_set_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
-                                     *pnum * BDRV_SECTOR_SIZE);
+        iscsi_allocmap_set_allocated(iscsilun, offset, *pnum);
     }

-    if (*pnum > nb_sectors) {
-        *pnum = nb_sectors;
+    if (*pnum > bytes) {
+        *pnum = bytes;
     }
 out_unlock:
     qemu_mutex_unlock(&iscsilun->mutex);
@@ -760,7 +758,7 @@ out:
     if (iTask.task != NULL) {
         scsi_free_scsi_task(iTask.task);
     }
-    if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID) {
+    if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID && file) {
         *file = bs;
     }
     return ret;
@@ -800,25 +798,24 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
                                  nb_sectors * BDRV_SECTOR_SIZE) &&
         !iscsi_allocmap_is_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
                                      nb_sectors * BDRV_SECTOR_SIZE)) {
-        int pnum;
-        BlockDriverState *file;
+        int64_t pnum;
         /* check the block status from the beginning of the cluster
          * containing the start sector */
-        int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
-        int head;
-        int64_t ret;
+        int64_t head;
+        int ret;

-        assert(cluster_sectors);
-        head = sector_num % cluster_sectors;
-        ret = iscsi_co_get_block_status(bs, sector_num - head,
-                                        BDRV_REQUEST_MAX_SECTORS, &pnum,
-                                        &file);
+        assert(iscsilun->cluster_size);
+        head = (sector_num * BDRV_SECTOR_SIZE) % iscsilun->cluster_size;
+        ret = iscsi_co_block_status(bs, false,
+                                    sector_num * BDRV_SECTOR_SIZE - head,
+                                    BDRV_REQUEST_MAX_BYTES, &pnum, NULL, NULL);
         if (ret < 0) {
             return ret;
         }
         /* if the whole request falls into an unallocated area we can avoid
          * reading and directly return zeroes instead */
-        if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors + head) {
+        if (ret & BDRV_BLOCK_ZERO &&
+            pnum >= nb_sectors * BDRV_SECTOR_SIZE + head) {
             qemu_iovec_memset(iov, 0, 0x00, iov->size);
             return 0;
         }
@@ -2218,7 +2215,7 @@ static BlockDriver bdrv_iscsi = {
     .bdrv_truncate   = iscsi_truncate,
     .bdrv_refresh_limits = iscsi_refresh_limits,

-    .bdrv_co_get_block_status = iscsi_co_get_block_status,
+    .bdrv_co_block_status  = iscsi_co_block_status,
     .bdrv_co_pdiscard      = iscsi_co_pdiscard,
     .bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
     .bdrv_co_readv         = iscsi_co_readv,
@@ -2253,7 +2250,7 @@ static BlockDriver bdrv_iser = {
     .bdrv_truncate   = iscsi_truncate,
     .bdrv_refresh_limits = iscsi_refresh_limits,

-    .bdrv_co_get_block_status = iscsi_co_get_block_status,
+    .bdrv_co_block_status  = iscsi_co_block_status,
     .bdrv_co_pdiscard      = iscsi_co_pdiscard,
     .bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
     .bdrv_co_readv         = iscsi_co_readv,
-- 
2.14.3

  parent reply	other threads:[~2018-02-13 20:27 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-13 20:26 [Qemu-devel] [PATCH v8 00/21] add byte-based block_status driver callbacks Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 01/21] block: Add .bdrv_co_block_status() callback Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 02/21] nvme: Drop pointless .bdrv_co_get_block_status() Eric Blake
2018-02-14 17:41   ` Philippe Mathieu-Daudé
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 03/21] block: Switch passthrough drivers to .bdrv_co_block_status() Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 04/21] file-posix: Switch " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 05/21] gluster: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 06/21] iscsi: Switch cluster_sectors to byte-based Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 07/21] iscsi: Switch iscsi_allocmap_update() " Eric Blake
2018-02-13 20:26 ` Eric Blake [this message]
2018-02-14 11:53   ` [Qemu-devel] [PATCH v8 08/21] iscsi: Switch to .bdrv_co_block_status() Kevin Wolf
2018-02-14 14:33     ` Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 09/21] null: " Eric Blake
2018-02-14 12:05   ` Kevin Wolf
2018-02-14 14:44     ` Eric Blake
2018-02-14 14:55       ` Kevin Wolf
2018-02-23 16:43     ` Eric Blake
2018-02-23 17:05       ` Kevin Wolf
2018-02-23 23:38         ` Eric Blake
2018-02-26 14:05           ` Kevin Wolf
2018-03-01  7:25             ` Vladimir Sementsov-Ogievskiy
2018-03-01  9:48               ` Kevin Wolf
2018-03-01  9:57                 ` Vladimir Sementsov-Ogievskiy
2018-03-01 10:13                   ` Kevin Wolf
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 10/21] parallels: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 11/21] qcow: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 12/21] qcow2: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 13/21] qed: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 14/21] raw: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 15/21] sheepdog: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 16/21] vdi: Avoid bitrot of debugging code Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 17/21] vdi: Switch to .bdrv_co_block_status() Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 18/21] vmdk: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 19/21] vpc: " Eric Blake
2018-02-14 13:08   ` Kevin Wolf
2018-02-14 14:51     ` Eric Blake
2018-02-13 20:27 ` [Qemu-devel] [PATCH v8 20/21] vvfat: " Eric Blake
2018-02-14 13:12   ` Kevin Wolf
2018-02-14 14:50     ` Eric Blake
2018-02-14 15:00       ` Kevin Wolf
2018-02-13 20:27 ` [Qemu-devel] [PATCH v8 21/21] block: Drop unused .bdrv_co_get_block_status() Eric Blake
2018-02-14 17:11 ` [Qemu-devel] [PATCH v8 00/21] add byte-based block_status driver callbacks Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180213202701.15858-9-eblake@redhat.com \
    --to=eblake@redhat.com \
    --cc=famz@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=pl@kamp.de \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=ronniesahlberg@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).