From: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
To: Alistair Francis <alistair.francis@xilinx.com>,
Peter Maydell <peter.maydell@linaro.org>,
Igor Mitsyanko <i.mitsyanko@gmail.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>,
qemu-devel@nongnu.org,
"Edgar E . Iglesias" <edgar.iglesias@xilinx.com>,
"Prasad J Pandit" <pjp@fedoraproject.org>,
"Andrzej Zaborowski" <balrogg@gmail.com>
Subject: [Qemu-devel] [PATCH v4 03/11] sdcard: add a trace event for command responses
Date: Thu, 15 Feb 2018 19:05:32 -0300 [thread overview]
Message-ID: <20180215220540.6556-4-f4bug@amsat.org> (raw)
In-Reply-To: <20180215220540.6556-1-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/sd/sd.c | 27 ++++++++++++++++++++++++---
hw/sd/trace-events | 1 +
2 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 72e9b47e34..8f72cde534 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -153,6 +153,27 @@ static const char *sd_state_name(enum SDCardStates state)
return state_name[state];
}
+static const char *sd_response_name(sd_rsp_type_t rsp)
+{
+ static const char *response_name[] = {
+ [sd_r0] = "RESP#0 (no response)",
+ [sd_r1] = "RESP#1 (normal cmd)",
+ [sd_r2_i] = "RESP#2 (CID reg)",
+ [sd_r2_s] = "RESP#2 (CSD reg)",
+ [sd_r3] = "RESP#3 (OCR reg)",
+ [sd_r6] = "RESP#6 (RCA)",
+ [sd_r7] = "RESP#7 (operating voltage)",
+ };
+ if (rsp == sd_illegal) {
+ return "ILLEGAL RESP";
+ }
+ if (rsp == sd_r1b) {
+ rsp = sd_r1;
+ }
+ assert(rsp <= ARRAY_SIZE(response_name));
+ return response_name[rsp];
+}
+
static uint8_t sd_get_dat_lines(SDState *sd)
{
return sd->enable ? sd->dat_lines : 0;
@@ -1596,10 +1617,12 @@ send_response:
case sd_r0:
case sd_illegal:
- default:
rsplen = 0;
break;
+ default:
+ g_assert_not_reached();
}
+ trace_sdcard_response(sd_response_name(rtype), rsplen);
if (rtype != sd_illegal) {
/* Clear the "clear on valid command" status bits now we've
@@ -1616,8 +1639,6 @@ send_response:
DPRINTF(" %02x", response[i]);
}
DPRINTF(" state %d\n", sd->state);
- } else {
- DPRINTF("No response %d\n", sd->state);
}
#endif
diff --git a/hw/sd/trace-events b/hw/sd/trace-events
index 75dac5a2cd..b2aa19ec0d 100644
--- a/hw/sd/trace-events
+++ b/hw/sd/trace-events
@@ -26,6 +26,7 @@ sdhci_capareg(const char *desc, uint16_t val) "%s: %u"
# hw/sd/sd.c
sdcard_normal_command(uint8_t cmd, uint32_t arg, const char *state) "CMD%d arg 0x%08x (state %s)"
sdcard_app_command(uint8_t acmd, uint32_t arg) "ACMD%d arg 0x%08x"
+sdcard_response(const char *rspdesc, int rsplen) "%s (sz:%d)"
sdcard_read_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x"
sdcard_write_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x"
--
2.16.1
next prev parent reply other threads:[~2018-02-15 22:06 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-15 22:05 [Qemu-devel] [PATCH v4 00/11] SDCard: housekeeping, add tracing (part 4) Philippe Mathieu-Daudé
2018-02-15 22:05 ` [Qemu-devel] [PATCH v4 01/11] sdcard: reorder SDState struct members Philippe Mathieu-Daudé
2018-02-15 22:05 ` [Qemu-devel] [PATCH v4 02/11] sdcard: replace DPRINTF() by trace events Philippe Mathieu-Daudé
2018-02-16 21:01 ` Alistair Francis
2018-02-15 22:05 ` Philippe Mathieu-Daudé [this message]
2018-02-27 2:14 ` [Qemu-devel] [PATCH v4 03/11] sdcard: add a trace event for command responses Alistair Francis
2018-02-15 22:05 ` [Qemu-devel] [PATCH v4 04/11] sdcard: replace fprintf() by qemu_hexdump() Philippe Mathieu-Daudé
2018-02-15 22:05 ` [Qemu-devel] [PATCH v4 05/11] sdcard: add more trace events Philippe Mathieu-Daudé
2018-02-15 22:05 ` [Qemu-devel] [PATCH v4 06/11] sdcard: do not trace CMD55 when expecting ACMD Philippe Mathieu-Daudé
2018-02-22 12:01 ` Peter Maydell
2018-03-09 14:07 ` Philippe Mathieu-Daudé
2018-02-15 22:05 ` [Qemu-devel] [PATCH v4 07/11] sdcard: define SDMMC_CMD_MAX instead of using the magic '64' Philippe Mathieu-Daudé
2018-02-15 22:05 ` [Qemu-devel] [PATCH v4 08/11] sdcard: display command name when tracing CMD/ACMD Philippe Mathieu-Daudé
2018-02-22 12:59 ` Peter Maydell
2018-03-09 14:51 ` Philippe Mathieu-Daudé
2018-02-15 22:05 ` [Qemu-devel] [PATCH v4 09/11] sdcard: display protocol used when tracing Philippe Mathieu-Daudé
2018-02-22 13:02 ` Peter Maydell
2018-03-03 12:09 ` Philippe Mathieu-Daudé
2018-02-15 22:05 ` [Qemu-devel] [PATCH v4 10/11] sdcard: use G_BYTE from cutils Philippe Mathieu-Daudé
2018-02-15 22:05 ` [Qemu-devel] [PATCH v4 11/11] sdcard: use the registerfields API to access the OCR register Philippe Mathieu-Daudé
2018-02-22 9:04 ` [Qemu-devel] [PATCH v4 00/11] SDCard: housekeeping, add tracing (part 4) Philippe Mathieu-Daudé
2018-02-22 13:08 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180215220540.6556-4-f4bug@amsat.org \
--to=f4bug@amsat.org \
--cc=alistair.francis@xilinx.com \
--cc=balrogg@gmail.com \
--cc=edgar.iglesias@xilinx.com \
--cc=i.mitsyanko@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=pjp@fedoraproject.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).