From: David Gibson <david@gibson.dropbear.id.au>
To: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: qemu-devel@nongnu.org, qemu-ppc@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 09/11] mac_newworld: use object link to pass OpenPIC object to macio
Date: Thu, 22 Feb 2018 13:19:24 +1100 [thread overview]
Message-ID: <20180222021924.GC2164@umbus.fritz.box> (raw)
In-Reply-To: <20180219181922.21586-10-mark.cave-ayland@ilande.co.uk>
[-- Attachment #1: Type: text/plain, Size: 6080 bytes --]
On Mon, Feb 19, 2018 at 06:19:20PM +0000, Mark Cave-Ayland wrote:
> Also switch macio_newworld_realize() over to use it rather than using the pic_mem
> memory region directly.
>
> Now that both Old World and New World macio devices no longer make use of the
> pic_mem memory region directly, we can remove it.
>
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
> ---
> hw/misc/macio/macio.c | 14 +++++++++-----
> hw/ppc/mac_newworld.c | 20 +++++++++++---------
> include/hw/misc/macio/macio.h | 4 +++-
> 3 files changed, 23 insertions(+), 15 deletions(-)
>
> diff --git a/hw/misc/macio/macio.c b/hw/misc/macio/macio.c
> index d4c1d190c4..e5288f1084 100644
> --- a/hw/misc/macio/macio.c
> +++ b/hw/misc/macio/macio.c
> @@ -279,10 +279,10 @@ static void macio_newworld_realize(PCIDevice *d, Error **errp)
> sysbus_connect_irq(sysbus_dev, 0, ns->irqs[cur_irq++]);
> sysbus_connect_irq(sysbus_dev, 1, ns->irqs[cur_irq++]);
>
> - if (s->pic_mem) {
> - /* OpenPIC */
> - memory_region_add_subregion(&s->bar, 0x40000, s->pic_mem);
> - }
> + /* OpenPIC */
> + sysbus_dev = SYS_BUS_DEVICE(ns->pic);
> + memory_region_add_subregion(&s->bar, 0x40000,
> + sysbus_mmio_get_region(sysbus_dev, 0));
>
> /* IDE buses */
> for (i = 0; i < ARRAY_SIZE(ns->ide); i++) {
> @@ -311,6 +311,11 @@ static void macio_newworld_init(Object *obj)
>
> qdev_init_gpio_out(DEVICE(obj), ns->irqs, ARRAY_SIZE(ns->irqs));
>
> + object_property_add_link(obj, "pic", TYPE_OPENPIC,
> + (Object **) &ns->pic,
> + qdev_prop_allow_set_link_before_realize,
> + 0, NULL);
> +
> for (i = 0; i < 2; i++) {
> macio_init_ide(s, &ns->ide[i], sizeof(ns->ide[i]), i);
> }
> @@ -441,7 +446,6 @@ void macio_init(PCIDevice *d,
> {
> MacIOState *macio_state = MACIO(d);
>
> - macio_state->pic_mem = pic_mem;
> /* Note: this code is strongly inspirated from the corresponding code
> in PearPC */
> qdev_prop_set_uint64(DEVICE(&macio_state->cuda), "timebase-frequency",
> diff --git a/hw/ppc/mac_newworld.c b/hw/ppc/mac_newworld.c
> index 396216954e..c7960ab67a 100644
> --- a/hw/ppc/mac_newworld.c
> +++ b/hw/ppc/mac_newworld.c
> @@ -154,7 +154,7 @@ static void ppc_core99_init(MachineState *machine)
> hwaddr kernel_base, initrd_base, cmdline_base = 0;
> long kernel_size, initrd_size;
> PCIBus *pci_bus;
> - PCIDevice *macio;
> + NewWorldMacIOState *macio;
> MACIOIDEState *macio_ide;
> BusState *adb_bus;
> MacIONVRAMState *nvr;
> @@ -166,7 +166,7 @@ static void ppc_core99_init(MachineState *machine)
> void *fw_cfg;
> int machine_arch;
> SysBusDevice *s;
> - DeviceState *dev;
> + DeviceState *dev, *pic_dev;
> int *token = g_new(int, 1);
> hwaddr nvram_addr = 0xFFF04000;
> uint64_t tbfreq;
> @@ -333,10 +333,10 @@ static void ppc_core99_init(MachineState *machine)
>
> pic = g_new0(qemu_irq, 64);
>
> - dev = qdev_create(NULL, TYPE_OPENPIC);
> - qdev_prop_set_uint32(dev, "model", OPENPIC_MODEL_KEYLARGO);
> - qdev_init_nofail(dev);
> - s = SYS_BUS_DEVICE(dev);
> + pic_dev = qdev_create(NULL, TYPE_OPENPIC);
> + qdev_prop_set_uint32(pic_dev, "model", OPENPIC_MODEL_KEYLARGO);
> + qdev_init_nofail(pic_dev);
> + s = SYS_BUS_DEVICE(pic_dev);
> pic_mem = s->mmio[0].memory;
> k = 0;
> for (i = 0; i < smp_cpus; i++) {
> @@ -346,7 +346,7 @@ static void ppc_core99_init(MachineState *machine)
> }
>
> for (i = 0; i < 64; i++) {
> - pic[i] = qdev_get_gpio_in(dev, i);
> + pic[i] = qdev_get_gpio_in(pic_dev, i);
> }
>
> if (PPC_INPUT(env) == PPC_FLAGS_INPUT_970) {
> @@ -369,7 +369,7 @@ static void ppc_core99_init(MachineState *machine)
> }
>
> /* MacIO */
> - macio = pci_create(pci_bus, -1, TYPE_NEWWORLD_MACIO);
> + macio = NEWWORLD_MACIO(pci_create(pci_bus, -1, TYPE_NEWWORLD_MACIO));
> dev = DEVICE(macio);
> qdev_connect_gpio_out(dev, 0, pic[0x19]); /* CUDA */
> qdev_connect_gpio_out(dev, 1, pic[0x24]); /* ESCC-B */
> @@ -379,7 +379,9 @@ static void ppc_core99_init(MachineState *machine)
> qdev_connect_gpio_out(dev, 5, pic[0x0e]); /* IDE */
> qdev_connect_gpio_out(dev, 6, pic[0x03]); /* IDE DMA */
> qdev_prop_set_uint64(dev, "frequency", tbfreq);
> - macio_init(macio, pic_mem);
> + object_property_set_link(OBJECT(macio), OBJECT(pic_dev), "pic",
> + &error_abort);
> + macio_init(PCI_DEVICE(macio), pic_mem);
>
> /* We only emulate 2 out of 3 IDE controllers for now */
> ide_drive_get(hd, ARRAY_SIZE(hd));
> diff --git a/include/hw/misc/macio/macio.h b/include/hw/misc/macio/macio.h
> index 843c114c07..4528282b36 100644
> --- a/include/hw/misc/macio/macio.h
> +++ b/include/hw/misc/macio/macio.h
> @@ -29,6 +29,7 @@
> #include "hw/intc/heathrow_pic.h"
> #include "hw/misc/macio/cuda.h"
> #include "hw/ppc/mac_dbdma.h"
> +#include "hw/ppc/openpic.h"
>
> #define TYPE_MACIO "macio"
> #define MACIO(obj) OBJECT_CHECK(MacIOState, (obj), TYPE_MACIO)
> @@ -42,7 +43,6 @@ typedef struct MacIOState {
> CUDAState cuda;
> DBDMAState dbdma;
> ESCCState escc;
> - MemoryRegion *pic_mem;
> uint64_t frequency;
> } MacIOState;
>
> @@ -70,6 +70,8 @@ typedef struct NewWorldMacIOState {
> /*< private >*/
> MacIOState parent_obj;
> /*< public >*/
> +
> + OpenPICState *pic;
> qemu_irq irqs[7];
> MACIOIDEState ide[2];
> } NewWorldMacIOState;
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2018-02-22 2:36 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-19 18:19 [Qemu-devel] [PATCH 00/11] macio: remove legacy macio_init() function Mark Cave-Ayland
2018-02-19 18:19 ` [Qemu-devel] [PATCH 01/11] macio: embed DBDMA device directly within macio Mark Cave-Ayland
2018-02-20 3:28 ` David Gibson
2018-02-19 18:19 ` [Qemu-devel] [PATCH 02/11] macio: move ESCC device within the macio device Mark Cave-Ayland
2018-02-20 3:28 ` David Gibson
2018-02-19 18:19 ` [Qemu-devel] [PATCH 03/11] heathrow: QOMify heathrow PIC Mark Cave-Ayland
2018-02-20 3:28 ` David Gibson
2018-02-20 4:18 ` Mark Cave-Ayland
2018-02-20 4:39 ` David Gibson
2018-02-19 18:19 ` [Qemu-devel] [PATCH 04/11] heathrow: convert to trace-events Mark Cave-Ayland
2018-02-20 4:20 ` David Gibson
2018-02-20 4:40 ` Mark Cave-Ayland
2018-02-19 18:19 ` [Qemu-devel] [PATCH 05/11] heathrow: change heathrow_pic_init() to return the heathrow device Mark Cave-Ayland
2018-02-20 4:22 ` David Gibson
2018-02-19 18:19 ` [Qemu-devel] [PATCH 06/11] macio: move macio related structures and defines into separate macio.h file Mark Cave-Ayland
2018-02-20 4:40 ` David Gibson
2018-02-27 23:46 ` Philippe Mathieu-Daudé
2018-02-19 18:19 ` [Qemu-devel] [PATCH 07/11] mac_oldworld: use object link to pass heathrow PIC object to macio Mark Cave-Ayland
2018-02-20 4:42 ` David Gibson
2018-02-19 18:19 ` [Qemu-devel] [PATCH 08/11] openpic: move OpenPIC state and related definitions to openpic.h Mark Cave-Ayland
2018-02-22 2:12 ` David Gibson
2018-02-19 18:19 ` [Qemu-devel] [PATCH 09/11] mac_newworld: use object link to pass OpenPIC object to macio Mark Cave-Ayland
2018-02-22 2:19 ` David Gibson [this message]
2018-02-19 18:19 ` [Qemu-devel] [PATCH 10/11] macio: move setting of CUDA timebase frequency to macio_common_realize() Mark Cave-Ayland
2018-02-22 2:24 ` David Gibson
2018-02-19 18:19 ` [Qemu-devel] [PATCH 11/11] macio: remove macio_init() function Mark Cave-Ayland
2018-02-22 14:12 ` [Qemu-devel] [PATCH 00/11] macio: remove legacy " no-reply
2018-02-23 12:11 ` no-reply
2018-02-23 14:51 ` Mark Cave-Ayland
2018-02-28 2:24 ` David Gibson
2018-02-24 17:18 ` no-reply
2018-02-25 15:24 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180222021924.GC2164@umbus.fritz.box \
--to=david@gibson.dropbear.id.au \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).