qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 18/32] sdcard: update the CSD CRC register regardless the CSD structure version
Date: Thu, 22 Feb 2018 15:22:53 +0000	[thread overview]
Message-ID: <20180222152307.7499-19-peter.maydell@linaro.org> (raw)
In-Reply-To: <20180222152307.7499-1-peter.maydell@linaro.org>

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215221325.7611-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sd.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index cc347ff782..110f2f1d0a 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -378,7 +378,6 @@ static void sd_set_csd(SDState *sd, uint64_t size)
         sd->csd[13] = 0x20 |	/* Max. write data block length */
             ((HWBLOCK_SHIFT << 6) & 0xc0);
         sd->csd[14] = 0x00;	/* File format group */
-        sd->csd[15] = (sd_crc7(sd->csd, 15) << 1) | 1;
     } else {			/* SDHC */
         size /= 512 * 1024;
         size -= 1;
@@ -397,8 +396,8 @@ static void sd_set_csd(SDState *sd, uint64_t size)
         sd->csd[12] = 0x0a;
         sd->csd[13] = 0x40;
         sd->csd[14] = 0x00;
-        sd->csd[15] = 0x00;
     }
+    sd->csd[15] = (sd_crc7(sd->csd, 15) << 1) | 1;
 }
 
 static void sd_set_rca(SDState *sd)
-- 
2.16.1

  parent reply	other threads:[~2018-02-22 15:23 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-22 15:22 [Qemu-devel] [PULL 00/32] target-arm queue Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 01/32] target/arm: Fix register definitions for VMIDR and VMPIDR Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 02/32] raspi: Add "raspi3" machine type Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 03/32] hw/char/stm32f2xx_usart: fix TXE/TC bit handling Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 04/32] Fix ast2500 protection register emulation Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 05/32] hw/sd/milkymist-memcard: use qemu_log_mask() Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 06/32] hw/sd/milkymist-memcard: split realize() out of SysBusDevice init() Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 07/32] hw/sd/milkymist-memcard: expose a SDBus and connect the SDCard to it Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 08/32] hw/sd/ssi-sd: use the SDBus API, connect the SDCard to the bus Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 09/32] sdcard: reorder SDState struct members Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 10/32] sdcard: replace DPRINTF() by trace events Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 11/32] sdcard: add a trace event for command responses Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 12/32] sdcard: replace fprintf() by qemu_hexdump() Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 13/32] sdcard: add more trace events Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 14/32] sdcard: define SDMMC_CMD_MAX instead of using the magic '64' Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 15/32] sdcard: use G_BYTE from cutils Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 16/32] sdcard: use the registerfields API to access the OCR register Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 17/32] sdcard: Don't always set the high capacity bit Peter Maydell
2018-02-22 15:22 ` Peter Maydell [this message]
2018-02-22 15:22 ` [Qemu-devel] [PULL 19/32] sdcard: fix the 'maximum data transfer rate' to 25MHz Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 20/32] sdcard: clean the SCR register and add few comments Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 21/32] sdcard: remove commands from unsupported old MMC specification Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 22/32] sdcard: simplify using the ldst API Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 23/32] sdcard: use the correct masked OCR in the R3 reply Peter Maydell
2018-02-22 15:22 ` [Qemu-devel] [PULL 24/32] sdcard: use the registerfields API for the CARD_STATUS register masks Peter Maydell
2018-02-22 15:23 ` [Qemu-devel] [PULL 25/32] sdcard: handle CMD54 (SDIO) Peter Maydell
2018-02-22 15:23 ` [Qemu-devel] [PULL 26/32] sdcard: handle the Security Specification commands Peter Maydell
2018-02-22 15:23 ` [Qemu-devel] [PULL 27/32] sdcard: use a more descriptive label 'unimplemented_spi_cmd' Peter Maydell
2018-02-22 15:23 ` [Qemu-devel] [PULL 28/32] sdcard: handles more commands in SPI mode Peter Maydell
2018-02-22 15:23 ` [Qemu-devel] [PULL 29/32] sdcard: check the card is in correct state for APP CMD (CMD55) Peter Maydell
2018-02-22 15:23 ` [Qemu-devel] [PULL 30/32] sdcard: warn if host uses an incorrect address " Peter Maydell
2018-02-22 15:23 ` [Qemu-devel] [PULL 31/32] sdcard: simplify SEND_IF_COND (CMD8) Peter Maydell
2018-02-22 15:23 ` [Qemu-devel] [PULL 32/32] sdcard: simplify SD_SEND_OP_COND (ACMD41) Peter Maydell
2018-02-23 10:04 ` [Qemu-devel] [PULL 00/32] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180222152307.7499-19-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).