qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>,
	Kevin Wolf <kwolf@redhat.com>, Fam Zheng <famz@redhat.com>,
	John Snow <jsnow@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PATCH v3 08/16] block/mirror: Use source as a BdrvChild
Date: Wed, 28 Feb 2018 19:04:59 +0100	[thread overview]
Message-ID: <20180228180507.3964-9-mreitz@redhat.com> (raw)
In-Reply-To: <20180228180507.3964-1-mreitz@redhat.com>

With this, the mirror_top_bs is no longer just a technically required
node in the BDS graph but actually represents the block job operation.

Also, drop MirrorBlockJob.source, as we can reach it through
mirror_top_bs->backing.

Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 block/mirror.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/block/mirror.c b/block/mirror.c
index d65fab3b45..addfdff4dd 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -43,7 +43,6 @@ typedef struct MirrorBlockJob {
     RateLimit limit;
     BlockBackend *target;
     BlockDriverState *mirror_top_bs;
-    BlockDriverState *source;
     BlockDriverState *base;
 
     /* The name of the graph node to replace */
@@ -301,7 +300,6 @@ static void coroutine_fn mirror_co_read(void *opaque)
 {
     MirrorOp *op = opaque;
     MirrorBlockJob *s = op->s;
-    BlockBackend *source = s->common.blk;
     int nb_chunks;
     uint64_t ret;
     uint64_t max_bytes;
@@ -351,7 +349,8 @@ static void coroutine_fn mirror_co_read(void *opaque)
     s->bytes_in_flight += op->bytes;
     trace_mirror_one_iteration(s, op->offset, op->bytes);
 
-    ret = blk_co_preadv(source, op->offset, op->bytes, &op->qiov, 0);
+    ret = bdrv_co_preadv(s->mirror_top_bs->backing, op->offset, op->bytes,
+                         &op->qiov, 0);
     mirror_read_complete(op, ret);
 }
 
@@ -429,7 +428,7 @@ static unsigned mirror_perform(MirrorBlockJob *s, int64_t offset,
 
 static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)
 {
-    BlockDriverState *source = s->source;
+    BlockDriverState *source = s->mirror_top_bs->backing->bs;
     MirrorOp *pseudo_op;
     int64_t offset;
     uint64_t delay_ns = 0, ret = 0;
@@ -604,7 +603,7 @@ static void mirror_exit(BlockJob *job, void *opaque)
     MirrorBlockJob *s = container_of(job, MirrorBlockJob, common);
     MirrorExitData *data = opaque;
     AioContext *replace_aio_context = NULL;
-    BlockDriverState *src = s->source;
+    BlockDriverState *src = s->mirror_top_bs->backing->bs;
     BlockDriverState *target_bs = blk_bs(s->target);
     BlockDriverState *mirror_top_bs = s->mirror_top_bs;
     Error *local_err = NULL;
@@ -719,7 +718,7 @@ static int coroutine_fn mirror_dirty_init(MirrorBlockJob *s)
 {
     int64_t offset;
     BlockDriverState *base = s->base;
-    BlockDriverState *bs = s->source;
+    BlockDriverState *bs = s->mirror_top_bs->backing->bs;
     BlockDriverState *target_bs = blk_bs(s->target);
     int ret;
     int64_t count;
@@ -801,7 +800,7 @@ static void coroutine_fn mirror_run(void *opaque)
 {
     MirrorBlockJob *s = opaque;
     MirrorExitData *data;
-    BlockDriverState *bs = s->source;
+    BlockDriverState *bs = s->mirror_top_bs->backing->bs;
     BlockDriverState *target_bs = blk_bs(s->target);
     bool need_drain = true;
     int64_t length;
@@ -1288,7 +1287,6 @@ static void mirror_start_job(const char *job_id, BlockDriverState *bs,
     /* The block job now has a reference to this node */
     bdrv_unref(mirror_top_bs);
 
-    s->source = bs;
     s->mirror_top_bs = mirror_top_bs;
 
     /* No resize for the target either; while the mirror is still running, a
-- 
2.14.3

  parent reply	other threads:[~2018-02-28 18:05 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-28 18:04 [Qemu-devel] [PATCH v3 00/16] block/mirror: Add active-sync mirroring Max Reitz
2018-02-28 18:04 ` [Qemu-devel] [PATCH v3 01/16] block: BDS deletion during bdrv_drain_recurse Max Reitz
2018-03-20  3:10   ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-02-28 18:04 ` [Qemu-devel] [PATCH v3 02/16] block: BDS deletion in bdrv_do_drained_begin() Max Reitz
2018-03-20  3:16   ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-02-28 18:04 ` [Qemu-devel] [PATCH v3 03/16] tests: Add bdrv-drain test for node deletion Max Reitz
2018-02-28 18:04 ` [Qemu-devel] [PATCH v3 04/16] block/mirror: Pull out mirror_perform() Max Reitz
2018-03-20  3:30   ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-02-28 18:04 ` [Qemu-devel] [PATCH v3 05/16] block/mirror: Convert to coroutines Max Reitz
2018-02-28 18:04 ` [Qemu-devel] [PATCH v3 06/16] block/mirror: Use CoQueue to wait on in-flight ops Max Reitz
2018-02-28 18:04 ` [Qemu-devel] [PATCH v3 07/16] block/mirror: Wait for in-flight op conflicts Max Reitz
2018-02-28 18:04 ` Max Reitz [this message]
2018-02-28 18:05 ` [Qemu-devel] [PATCH v3 09/16] block: Generalize should_update_child() rule Max Reitz
2018-02-28 18:05 ` [Qemu-devel] [PATCH v3 10/16] hbitmap: Add @advance param to hbitmap_iter_next() Max Reitz
2018-02-28 18:05 ` [Qemu-devel] [PATCH v3 11/16] test-hbitmap: Add non-advancing iter_next tests Max Reitz
2018-03-01  7:00   ` Fam Zheng
2018-02-28 18:05 ` [Qemu-devel] [PATCH v3 12/16] block/dirty-bitmap: Add bdrv_dirty_iter_next_area Max Reitz
2018-03-15 19:51   ` John Snow
2018-02-28 18:05 ` [Qemu-devel] [PATCH v3 13/16] block/mirror: Add MirrorBDSOpaque Max Reitz
2018-02-28 18:05 ` [Qemu-devel] [PATCH v3 14/16] block/mirror: Add active mirroring Max Reitz
2018-02-28 18:05 ` [Qemu-devel] [PATCH v3 15/16] block/mirror: Add copy mode QAPI interface Max Reitz
2018-03-20 17:35   ` Eric Blake
2018-03-21 11:25     ` Max Reitz
2018-02-28 18:05 ` [Qemu-devel] [PATCH v3 16/16] iotests: Add test for active mirroring Max Reitz
2018-02-28 18:55 ` [Qemu-devel] [PATCH v3 00/16] block/mirror: Add active-sync mirroring no-reply
2018-03-01  7:08 ` Fam Zheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180228180507.3964-9-mreitz@redhat.com \
    --to=mreitz@redhat.com \
    --cc=famz@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).